iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
Jonathan Cameron
maintainerPATCH 1/1 iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
From: Jonathan Cameron <[email protected]>
Something when wrong when applying the original patch and only the c file made it in. Here the rest of the changes are applied.
Fixes c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by Lars-Peter Clausen <[email protected]>
Cc Javier Carrasco <[email protected]>
Cc Li peiyu <[email protected]>
Signed-off-by Jonathan Cameron <[email protected]>
--- MAINTAINERS | 8 ++++++++ drivers/iio/humidity/Kconfig | 12 ++++++++++++ drivers/iio/humidity/Makefile | 1 + 3 files changed, 21 insertions(+)
MAINTAINERS +8 -0
@@ -22005,6 +22005,14 @@ F: Documentation/devicetree/bindings/media/i2c/ti,ds90* F: drivers/media/i2c/ds90* F: include/media/i2c/ds90* +TI HDC302X HUMIDITY DRIVER +M: Javier Carrasco <[email protected]> +M: Li peiyu <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +F: drivers/iio/humidity/hdc3020.c + TI ICSSG ETHERNET DRIVER (ICSSG) R: MD Danish Anwar <[email protected]> R: Roger Quadros <[email protected]>
drivers/iio/humidity/Kconfig +12 -0
@@ -48,6 +48,18 @@ config HDC2010 To compile this driver as a module, choose M here: the module will be called hdc2010. +config HDC3020 + tristate "TI HDC3020 relative humidity and temperature sensor" + depends on I2C + select CRC8 + help + Say yes here to build support for the Texas Instruments + HDC3020, HDC3021 and HDC3022 relative humidity and temperature + sensors. + + To compile this driver as a module, choose M here: the module + will be called hdc3020. + config HID_SENSOR_HUMIDITY tristate "HID Environmental humidity sensor" depends on HID_SENSOR_HUB
drivers/iio/humidity/Makefile +1 -0
@@ -7,6 +7,7 @@ obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC2010) += hdc2010.o +obj-$(CONFIG_HDC3020) += hdc3020.o obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o hts221-y := hts221_core.o \
Signature · 1 line
2.43.0
Quoted 10 lines · Jonathan Cameron
From: Jonathan Cameron <[email protected]>
Something when wrong when applying the original patch and only the c file made it in. Here the rest of the changes are applied.
Fixes c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors")Reported-by Lars-Peter Clausen <[email protected]>Cc Javier Carrasco <[email protected]>Cc Li peiyu <[email protected]>Signed-off-by Jonathan Cameron <[email protected]>
Looks good, thanks Jonathan.
Reviewed-by Lars-Peter Clausen <[email protected]>
Quoted 60 lines
--- MAINTAINERS | 8 ++++++++ drivers/iio/humidity/Kconfig | 12 ++++++++++++ drivers/iio/humidity/Makefile | 1 + 3 files changed, 21 insertions(+)MAINTAINERS +8
-0@@ -22005,6 +22005,14 @@ F: Documentation/devicetree/bindings/media/i2c/ti,ds90* F: drivers/media/i2c/ds90* F: include/media/i2c/ds90* +TI HDC302X HUMIDITY DRIVER +M: Javier Carrasco <[email protected]> +M: Li peiyu <[email protected]> +L: [email protected] +S: Maintained +F: Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml +F: drivers/iio/humidity/hdc3020.c + TI ICSSG ETHERNET DRIVER (ICSSG) R: MD Danish Anwar <[email protected]> R: Roger Quadros <[email protected]>drivers/iio/humidity/Kconfig +12
-0@@ -48,6 +48,18 @@ config HDC2010 To compile this driver as a module, choose M here: the module will be called hdc2010. +config HDC3020 + tristate "TI HDC3020 relative humidity and temperature sensor" + depends on I2C + select CRC8 + help + Say yes here to build support for the Texas Instruments + HDC3020, HDC3021 and HDC3022 relative humidity and temperature + sensors. + + To compile this driver as a module, choose M here: the module + will be called hdc3020. + config HID_SENSOR_HUMIDITY tristate "HID Environmental humidity sensor" depends on HID_SENSOR_HUBdrivers/iio/humidity/Makefile +1
-0@@ -7,6 +7,7 @@ obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC2010) += hdc2010.o +obj-$(CONFIG_HDC3020) += hdc3020.o obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o hts221-y := hts221_core.o \