Skip to contentSkip to conversation

io_uring: add support for truncate

PATCH In review Tony Solomonik 4 participants 8 messages Jan 22, 2024 io_uring

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 io_uring: add support for truncate

Libraries that are built on io_uring currently need to maintain a separate thread pool implementation when they want to truncate a file.

---
 include/uapi/linux/io_uring.h |  1 +
 io_uring/Makefile             |  2 +-
 io_uring/opdef.c              |  8 ++++++
 io_uring/truncate.c           | 53 +++++++++++++++++++++++++++++++++++
 io_uring/truncate.h           |  4 +++
 5 files changed, 67 insertions(+), 1 deletion(-)
 create mode 100644 io_uring/truncate.c
 create mode 100644 io_uring/truncate.h
include/uapi/linux/io_uring.h +1 -0
index f1c16f817742..513f31ee8ce9 100644
@@ -253,6 +253,7 @@ enum io_uring_op {
 	IORING_OP_FUTEX_WAIT,
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
+	IORING_OP_TRUNCATE,
 
 	/* this goes last, obviously */
 	IORING_OP_LAST,
io_uring/Makefile +1 -1
index e5be47e4fc3b..4f8ed6530a29 100644
@@ -8,6 +8,6 @@ obj-$(CONFIG_IO_URING)		+= io_uring.o xattr.o nop.o fs.o splice.o \
 					statx.o net.o msg_ring.o timeout.o \
 					sqpoll.o fdinfo.o tctx.o poll.o \
 					cancel.o kbuf.o rsrc.o rw.o opdef.o \
-					notif.o waitid.o
+					notif.o waitid.o truncate.o
 obj-$(CONFIG_IO_WQ)		+= io-wq.o
 obj-$(CONFIG_FUTEX)		+= futex.o
io_uring/opdef.c +8 -0
index 799db44283c7..60827099e244 100644
@@ -35,6 +35,7 @@
 #include "rw.h"
 #include "waitid.h"
 #include "futex.h"
+#include "truncate.h"
 
 static int io_no_issue(struct io_kiocb *req, unsigned int issue_flags)
 {
@@ -469,6 +470,10 @@ const struct io_issue_def io_issue_defs[] = {
 		.prep			= io_eopnotsupp_prep,
 #endif
 	},
+	[IORING_OP_TRUNCATE] = {
+		.prep			= io_truncate_prep,
+		.issue			= io_truncate,
+	},
 };
 
 const struct io_cold_def io_cold_defs[] = {
@@ -704,6 +709,9 @@ const struct io_cold_def io_cold_defs[] = {
 	[IORING_OP_FUTEX_WAITV] = {
 		.name			= "FUTEX_WAITV",
 	},
+	[IORING_OP_TRUNCATE] = {
+		.name			= "TRUNCATE",
+	},
 };
 
 const char *io_uring_get_opcode(u8 opcode)
io_uring/truncate.c new file +53 -0

53 lines not on this page · raw message

io_uring/truncate.h new file +4 -0
new file mode 100644
index 000000000000..ab17cb9acc90
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe);
+int io_truncate(struct io_kiocb *req, unsigned int issue_flags);
Signature · 1 line
2.34.1
#1 lore raw

PATCH 2/2 io_uring: add support for ftruncate

Like truncate, ftruncate should also be supported in io_uring.

---
 include/uapi/linux/io_uring.h |  1 +
 io_uring/opdef.c              |  7 +++++++
 io_uring/truncate.c           | 37 +++++++++++++++++++++++++++++++++++
 io_uring/truncate.h           |  3 +++
 4 files changed, 48 insertions(+)
include/uapi/linux/io_uring.h +1 -0
index 513f31ee8ce9..8ebaf667c07d 100644
@@ -254,6 +254,7 @@ enum io_uring_op {
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
 	IORING_OP_TRUNCATE,
+	IORING_OP_FTRUNCATE,
 
 	/* this goes last, obviously */
 	IORING_OP_LAST,
io_uring/opdef.c +7 -0
index 60827099e244..88054f3df83c 100644
@@ -474,6 +474,10 @@ const struct io_issue_def io_issue_defs[] = {
 		.prep			= io_truncate_prep,
 		.issue			= io_truncate,
 	},
+	[IORING_OP_FTRUNCATE] = {
+		.prep			= io_ftruncate_prep,
+		.issue			= io_ftruncate,
+	},
 };
 
 const struct io_cold_def io_cold_defs[] = {
@@ -712,6 +716,9 @@ const struct io_cold_def io_cold_defs[] = {
 	[IORING_OP_TRUNCATE] = {
 		.name			= "TRUNCATE",
 	},
+	[IORING_OP_FTRUNCATE] = {
+		.name			= "FTRUNCATE",
+	},
 };
 
 const char *io_uring_get_opcode(u8 opcode)
io_uring/truncate.c +37 -0
index 82648b2fbc7e..e31d28a478d2 100644
@@ -21,6 +21,12 @@ struct io_trunc {
 	loff_t				len;
 };
 
+struct io_ftrunc {
+	struct file			*file;
+	int				dfd;
+	loff_t				len;
+};
+
 int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 {
 	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
@@ -51,3 +57,34 @@ int io_truncate(struct io_kiocb *req, unsigned int issue_flags)
 	io_req_set_res(req, ret, 0);
 	return IOU_OK;
 }
+
+int io_ftruncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+	struct io_ftrunc *ft = io_kiocb_to_cmd(req, struct io_ftrunc);
+
+	if (sqe->off || sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in)
+		return -EINVAL;
+	if (unlikely(req->flags & REQ_F_FIXED_FILE))
+		return -EBADF;
+
+	ft->dfd = READ_ONCE(sqe->fd);
+	ft->len = READ_ONCE(sqe->len);
+
+	req->flags |= REQ_F_NEED_CLEANUP;
+	req->flags |= REQ_F_FORCE_ASYNC;
+	return 0;
+}
+
+int io_ftruncate(struct io_kiocb *req, unsigned int issue_flags)
+{
+	struct io_ftrunc *ft = io_kiocb_to_cmd(req, struct io_ftrunc);
+	int ret;
+
+	WARN_ON_ONCE(issue_flags & IO_URING_F_NONBLOCK);
+
+	ret = do_sys_ftruncate(ft->dfd, ft->len, 1);
+
+	req->flags &= ~REQ_F_NEED_CLEANUP;
+	io_req_set_res(req, ret, 0);
+	return IOU_OK;
+}
io_uring/truncate.h +3 -0
index ab17cb9acc90..a9fc20b5f926 100644
@@ -2,3 +2,6 @@
 
 int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe);
 int io_truncate(struct io_kiocb *req, unsigned int issue_flags);
+
+int io_ftruncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe);
+int io_ftruncate(struct io_kiocb *req, unsigned int issue_flags);
Signature · 1 line
2.34.1
maintainer
#2 lore raw

Re: [PATCH 2/2] io_uring: add support for ftruncate

io_uring/truncate.c int io_truncate(struct io_kiocb *req, unsigned int issue_flags) · line 85

Quoted 8 lines
io_uring/truncate.c +8 -0
+int io_ftruncate(struct io_kiocb *req, unsigned int issue_flags)
+{
+	struct io_ftrunc *ft = io_kiocb_to_cmd(req, struct io_ftrunc);
+	int ret;
+
+	WARN_ON_ONCE(issue_flags & IO_URING_F_NONBLOCK);
+
+	ret = do_sys_ftruncate(ft->dfd, ft->len, 1);

This needs a __do_ftruncate() or something helper that takes a struct file, that should be done as a prep patch. Then do_sys_ftruncate() can call that helper as well, once it's done the fget.

With that, you also then remove the restriction you currently have that it can't work on fixed files, there's no reason for that restriction to be there.

Same comments on len vs offset, and the CLEANUP part. Both need to get done here as well.

Signature · 1 line
Jens Axboe
#3 lore raw
In reply to Tony Solomonik

Hello Tony,

io_uring/truncate.c line 34

Quoted 11 lines · Tony Solomonik
io_uring/truncate.c new file +11 -0
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
+
+	if (sqe->off || sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in)
+		return -EINVAL;
+	if (unlikely(req->flags & REQ_F_FIXED_FILE))
+		return -EBADF;
+
+	tr->pathname = u64_to_user_ptr(READ_ONCE(sqe->addr));
+	tr->len = READ_ONCE(sqe->len);

sqe->len is 32 bits. I _think_ loff_t is or could be 64-bits. Isn't it possible to use a u64 here? Maybe sqe->off or sqe->addr?

maintainer
#4 lore raw
In reply to Tony Solomonik
Quoted 2 lines · Tony Solomonik

Libraries that are built on io_uring currently need to maintain a separate thread pool implementation when they want to truncate a file.

In general, I think we should just make this one opcode, and then require fd to be -1 for the truncate case (with path in addr, like you have, or have a valid fd and NULL addr for the fruncate case. Then at least we don't waste two opcodes on essentially the same functionality. One minor code comment, which applies to both patches:

io_uring/truncate.c line 34

Quoted 11 lines
io_uring/truncate.c new file +11 -0
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
+
+	if (sqe->off || sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in)
+		return -EINVAL;
+	if (unlikely(req->flags & REQ_F_FIXED_FILE))
+		return -EBADF;
+
+	tr->pathname = u64_to_user_ptr(READ_ONCE(sqe->addr));
+	tr->len = READ_ONCE(sqe->len);

This should use offset rather than len, as Breno pointed out.

io_uring/truncate.c line 36

Quoted 1 line
io_uring/truncate.c new file +1 -0
+	req->flags |= REQ_F_NEED_CLEANUP;

Why is this being set? There's nothing to clean up post completion, so this just slows req completion down for no particularly reason. And the you can kill the same flag force clear in io_truncate as well.

Signature · 1 line
Jens Axboe
#5 lore raw
In reply to Tony Solomonik
Quoted 2 lines · Tony Solomonik

Libraries that are built on io_uring currently need to maintain a separate thread pool implementation when they want to truncate a file.

I don't think it makes sense to have both ftruncate and truncate in io_uring. One can just as easily link an open+ftruncate to have the same semantics in one go.

Quoted 136 lines
---
 include/uapi/linux/io_uring.h |  1 +
 io_uring/Makefile             |  2 +-
 io_uring/opdef.c              |  8 ++++++
 io_uring/truncate.c           | 53 +++++++++++++++++++++++++++++++++++
 io_uring/truncate.h           |  4 +++
 5 files changed, 67 insertions(+), 1 deletion(-)
 create mode 100644 io_uring/truncate.c
 create mode 100644 io_uring/truncate.h
include/uapi/linux/io_uring.h +1 -0
index f1c16f817742..513f31ee8ce9 100644
@@ -253,6 +253,7 @@ enum io_uring_op {
 	IORING_OP_FUTEX_WAIT,
 	IORING_OP_FUTEX_WAKE,
 	IORING_OP_FUTEX_WAITV,
+	IORING_OP_TRUNCATE,
 
 	/* this goes last, obviously */
 	IORING_OP_LAST,
io_uring/Makefile +1 -1
index e5be47e4fc3b..4f8ed6530a29 100644
@@ -8,6 +8,6 @@ obj-$(CONFIG_IO_URING)		+= io_uring.o xattr.o nop.o fs.o splice.o \
 					statx.o net.o msg_ring.o timeout.o \
 					sqpoll.o fdinfo.o tctx.o poll.o \
 					cancel.o kbuf.o rsrc.o rw.o opdef.o \
-					notif.o waitid.o
+					notif.o waitid.o truncate.o
 obj-$(CONFIG_IO_WQ)		+= io-wq.o
 obj-$(CONFIG_FUTEX)		+= futex.o
io_uring/opdef.c +8 -0
index 799db44283c7..60827099e244 100644
@@ -35,6 +35,7 @@
 #include "rw.h"
 #include "waitid.h"
 #include "futex.h"
+#include "truncate.h"
 
 static int io_no_issue(struct io_kiocb *req, unsigned int issue_flags)
 {
@@ -469,6 +470,10 @@ const struct io_issue_def io_issue_defs[] = {
 		.prep			= io_eopnotsupp_prep,
 #endif
 	},
+	[IORING_OP_TRUNCATE] = {
+		.prep			= io_truncate_prep,
+		.issue			= io_truncate,
+	},
 };
 
 const struct io_cold_def io_cold_defs[] = {
@@ -704,6 +709,9 @@ const struct io_cold_def io_cold_defs[] = {
 	[IORING_OP_FUTEX_WAITV] = {
 		.name			= "FUTEX_WAITV",
 	},
+	[IORING_OP_TRUNCATE] = {
+		.name			= "TRUNCATE",
+	},
 };
 
 const char *io_uring_get_opcode(u8 opcode)
io_uring/truncate.c new file +53 -0
new file mode 100644
index 000000000000..82648b2fbc7e
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <linux/io_uring.h>
+
+#include <uapi/linux/io_uring.h>
+
+#include "../fs/internal.h"
+
+#include "io_uring.h"
+#include "truncate.h"
+
+struct io_trunc {
+	struct files    *file;
+	char __user     *pathname;
+	loff_t				len;
+};
+
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
+
+	if (sqe->off || sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in)
+		return -EINVAL;
+	if (unlikely(req->flags & REQ_F_FIXED_FILE))
+		return -EBADF;
+
+	tr->pathname = u64_to_user_ptr(READ_ONCE(sqe->addr));
+	tr->len = READ_ONCE(sqe->len);
+
+	req->flags |= REQ_F_NEED_CLEANUP;
+	req->flags |= REQ_F_FORCE_ASYNC;
+	return 0;
+}
+
+int io_truncate(struct io_kiocb *req, unsigned int issue_flags)
+{
+	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
+	int ret;
+
+	WARN_ON_ONCE(issue_flags & IO_URING_F_NONBLOCK);
+
+	ret = do_sys_truncate(tr->pathname, tr->len);
+
+	req->flags &= ~REQ_F_NEED_CLEANUP;
+	io_req_set_res(req, ret, 0);
+	return IOU_OK;
+}
io_uring/truncate.h new file +4 -0
new file mode 100644
index 000000000000..ab17cb9acc90
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe);
+int io_truncate(struct io_kiocb *req, unsigned int issue_flags);
Signature · 1 line
Gabriel Krisman Bertazi
maintainer
#6 lore raw
Quoted 8 lines · Gabriel Krisman Bertazi
Quoted 2 lines · Tony Solomonik

Libraries that are built on io_uring currently need to maintain a separate thread pool implementation when they want to truncate a file.

I don't think it makes sense to have both ftruncate and truncate in io_uring. One can just as easily link an open+ftruncate to have the same semantics in one go.

Yeah, see comment on the life time issue with this one as well, which is avoided with the fd variant. So if just having the ftruncate variant is good enough, that's solve that headache too. And if done like I suggested where fd must be valid and we -EINVAL on sqe->addr being set, you could always add truncate by path functionality later on top without requiring a new opcode just for that.

Signature · 1 line
Jens Axboe
maintainer
#7 lore raw
In reply to Tony Solomonik

One more thing on this one...

io_uring/truncate.c line 33

Quoted 10 lines
io_uring/truncate.c new file +10 -0
+int io_truncate_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
+{
+	struct io_trunc *tr = io_kiocb_to_cmd(req, struct io_trunc);
+
+	if (sqe->off || sqe->rw_flags || sqe->buf_index || sqe->splice_fd_in)
+		return -EINVAL;
+	if (unlikely(req->flags & REQ_F_FIXED_FILE))
+		return -EBADF;
+
+	tr->pathname = u64_to_user_ptr(READ_ONCE(sqe->addr));

io_uring generally guarantees that any data passed in is stable past submit returns, but that's not the case here. Imagine you had code ala:

prep_truncate(ring, dir, filename)

{
	char path[PATH_MAX];

	sprintf(path, "%s/%s", dir, filename);
	sqe = io_uring_get_seq(ring);
	io_uring_prep_truncate(sqe, path, -1, 0);
	/* your io_truncate_prep() will be run here */
	io_uring_submit(ring);
}

io_loop()

{
	...
	prep_truncate(ring, dir, filename);
	/* path was on stack and now out-of-scope, and there's nothing
	   preventing io_truncate() from running post that. */
}

which implies you'd want some refactoring done here as well, so you can pass in a path for do_sys_truncate(). And then you would certainly need the cleanup flag set, but also provide a ->cleanup() helper. See some of the other fs handling code, like xattr, for how that should be done.

This problem obviously doesn't exist for the fd ftruncate variant, as there's no path resolution to do there.

Signature · 1 line
Jens Axboe