Add Phytec i.MX93 support
Subsystems (3)
PATCH v2 1/1 Add Phytec i.MX93 support
Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.
---
Hello,
This new revision takes Yannic and Primoz comments into account. I went for a configuration file that is named imx93-phyboard-segin_defconfig, which is inline with the imx8mm-phygate-tauri-l_defconfig, as discussed with Yannic.
This way, the device tree and the configuration files are matching. I restored the original phycore_imx93 directory in board/phytec/. The documentation is updated accordingly.
I aligned the device trees with the v5 revision of the matching kernel patch.
I removed the initialization of fec and eqos Ethernet ports that is not tested yet.
Thanks,
Mathieu
v1: https://lists.denx.de/pipermail/u-boot/2024-January/543599.html
arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 287 +++ arch/arm/dts/imx93-phyboard-segin.dts | 117 ++ arch/arm/dts/imx93-phycore-som.dtsi | 126 ++ arch/arm/mach-imx/imx9/Kconfig | 6 + board/phytec/phycore_imx93/Kconfig | 13 + board/phytec/phycore_imx93/MAINTAINERS | 10 + board/phytec/phycore_imx93/Makefile | 14 + board/phytec/phycore_imx93/lpddr4_timing.c | 1546 +++++++++++++++++ board/phytec/phycore_imx93/phycore_imx93.c | 61 + board/phytec/phycore_imx93/phycore_imx93.env | 96 + board/phytec/phycore_imx93/spl.c | 182 ++ configs/imx93-phyboard-segin_defconfig | 147 ++ doc/board/phytec/imx93-phyboard-segin.rst | 61 + doc/board/phytec/index.rst | 1 + include/configs/phycore_imx93.h | 47 + 16 files changed, 2716 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi create mode 100644 arch/arm/dts/imx93-phyboard-segin.dts create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi create mode 100644 board/phytec/phycore_imx93/Kconfig create mode 100644 board/phytec/phycore_imx93/MAINTAINERS create mode 100644 board/phytec/phycore_imx93/Makefile create mode 100644 board/phytec/phycore_imx93/lpddr4_timing.c create mode 100644 board/phytec/phycore_imx93/phycore_imx93.c create mode 100644 board/phytec/phycore_imx93/phycore_imx93.env create mode 100644 board/phytec/phycore_imx93/spl.c create mode 100644 configs/imx93-phyboard-segin_defconfig create mode 100644 doc/board/phytec/imx93-phyboard-segin.rst create mode 100644 include/configs/phycore_imx93.h
arch/arm/dts/Makefile +2 -1
@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ dtb-$(CONFIG_ARCH_IMX9) += \ imx93-11x11-evk.dtb \ - imx93-var-som-symphony.dtb + imx93-var-som-symphony.dtb \ + imx93-phyboard-segin.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi new file +287 -0
287 lines not on this page · raw message
arch/arm/dts/imx93-phyboard-segin.dts new file +117 -0
117 lines not on this page · raw message
arch/arm/dts/imx93-phycore-som.dtsi new file +126 -0
126 lines not on this page · raw message
arch/arm/mach-imx/imx9/Kconfig +6 -0
@@ -37,9 +37,15 @@ config TARGET_IMX93_VAR_SOM select IMX93 select IMX9_LPDDR4X +config TARGET_PHYCORE_IMX93 + bool "phycore_imx93" + select IMX93 + select IMX9_LPDDR4X + endchoice source "board/freescale/imx93_evk/Kconfig" +source "board/phytec/phycore_imx93/Kconfig" source "board/variscite/imx93_var_som/Kconfig" endif
board/phytec/phycore_imx93/Kconfig new file +13 -0
@@ -0,0 +1,13 @@ + +if TARGET_PHYCORE_IMX93 + +config SYS_BOARD + default "phycore_imx93" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "phycore_imx93" + +endif
board/phytec/phycore_imx93/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +phyCORE-i.MX93 +M: Mathieu Othacehe <[email protected]> +W: https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ +S: Maintained +F: arch/arm/dts/imx93-phyboard-segin.dts +F: arch/arm/dts/imx93-phycore-som.dtsi +F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi +F: board/phytec/phycore_imx93/ +F: configs/imx93-phyboard-segin_defconfig +F: include/configs/phycore_imx93.h
board/phytec/phycore_imx93/Makefile new file +14 -0
@@ -0,0 +1,14 @@ +# +# Copyright 2022 NXP +# Copyright (C) 2023 PHYTEC Messtechnik GmbH +# Christoph Stoidner <[email protected]> +# Copyright (C) 2024 Mathieu Othacehe <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += phycore_imx93.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o lpddr4_timing.o +endif
board/phytec/phycore_imx93/lpddr4_timing.c new file +1546 -0
1,546 lines not on this page · raw message
board/phytec/phycore_imx93/phycore_imx93.c new file +61 -0
61 lines not on this page · raw message
board/phytec/phycore_imx93/phycore_imx93.env new file +96 -0
96 lines not on this page · raw message
board/phytec/phycore_imx93/spl.c new file +182 -0
182 lines not on this page · raw message
configs/imx93-phyboard-segin_defconfig new file +147 -0
147 lines not on this page · raw message
doc/board/phytec/imx93-phyboard-segin.rst new file +61 -0
61 lines not on this page · raw message
doc/board/phytec/index.rst +1 -0
@@ -7,5 +7,6 @@ PHYTEC :maxdepth: 2 imx8mm-phygate-tauri-l + imx93-phyboard-segin phycore-imx8mm phycore-imx8mp
include/configs/phycore_imx93.h new file +47 -0
47 lines not on this page · raw message
Signature · 1 line
2.41.0
Hi Mathieu,
First of all, thank you for the v2.
I was able quickly build & test on the actual board.
Here are my findings:
- FEC ethernet doesn't work
- distroboot doesn't work
Did you expirience the same?
Nonetheless, here are my comments for v2:
Quoted 2 lines · Mathieu Othacehe
Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.
Can you rework you commit msg + title please?
Something like this would be more appropriate:
title:
"board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support"
msg:
Add initial support for the PHYTEC phyBOARD-Segin-i.MX93 board based on the PHYTEC phyCORE-i.MX93 SoM.
Supported features:
- 1GB LPDDR4 RAM
- eMMC
- external SD
- debug UART
- watchdog
Thanks!
Quoted 40 lines
Signed-off-by Mathieu Othacehe <[email protected]>---
Hello,This new revision takes Yannic and Primoz comments into account. I went for a configuration file that is named imx93-phyboard-segin_defconfig, which is inline with the imx8mm-phygate-tauri-l_defconfig, as discussed with Yannic.>
This way, the device tree and the configuration files are matching. I restored the originalphycore_imx93directory in board/phytec/. The documentation is updated accordingly.>
I aligned the device trees with the v5 revision of the matching kernel patch.I removed the initialization of fec and eqos Ethernet ports that is not tested yet.
Thanks,
Mathieu>
v1: https://lists.denx.de/pipermail/u-boot/2024-January/543599.htmlarch/arm/dts/Makefile | 3 +- arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi | 287 +++ arch/arm/dts/imx93-phyboard-segin.dts | 117 ++ arch/arm/dts/imx93-phycore-som.dtsi | 126 ++ arch/arm/mach-imx/imx9/Kconfig | 6 + board/phytec/phycore_imx93/Kconfig | 13 + board/phytec/phycore_imx93/MAINTAINERS | 10 + board/phytec/phycore_imx93/Makefile | 14 + board/phytec/phycore_imx93/lpddr4_timing.c | 1546 +++++++++++++++++ board/phytec/phycore_imx93/phycore_imx93.c | 61 + board/phytec/phycore_imx93/phycore_imx93.env | 96 + board/phytec/phycore_imx93/spl.c | 182 ++ configs/imx93-phyboard-segin_defconfig | 147 ++ doc/board/phytec/imx93-phyboard-segin.rst | 61 + doc/board/phytec/index.rst | 1 + include/configs/phycore_imx93.h | 47 + 16 files changed, 2716 insertions(+), 1 deletion(-)
Quoted 8 lines
create mode 100644 arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi create mode 100644 arch/arm/dts/imx93-phyboard-segin.dts create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi create mode 100644 board/phytec/phycore_imx93/Kconfig create mode 100644 board/phytec/phycore_imx93/MAINTAINERS create mode 100644 board/phytec/phycore_imx93/Makefile create mode 100644 board/phytec/phycore_imx93/lpddr4_timing.c create mode 100644 board/phytec/phycore_imx93/phycore_imx93.c
board file is named phycore-imx93.c in downstream.
Also other PHYTEC products in upstream use the same:
$ ls board/phytec/phycore_*/phycore*.c board/phytec/phycore_am62x/phycore-am62x.c board/phytec/phycore_imx93/phycore_imx93.c board/phytec/phycore_imx8mm/phycore-imx8mm.c board/phytec/phycore_rk3288/phycore-rk3288.c board/phytec/phycore_imx8mp/phycore-imx8mp.c
Can you rename to match other?
Quoted 193 lines
create mode 100644 board/phytec/phycore_imx93/phycore_imx93.env create mode 100644 board/phytec/phycore_imx93/spl.c create mode 100644 configs/imx93-phyboard-segin_defconfig create mode 100644 doc/board/phytec/imx93-phyboard-segin.rst create mode 100644 include/configs/phycore_imx93.harch/arm/dts/Makefile +2
-1@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \ dtb-$(CONFIG_ARCH_IMX9) += \ imx93-11x11-evk.dtb \ - imx93-var-som-symphony.dtb + imx93-var-som-symphony.dtb \ + imx93-phyboard-segin.dtb dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \ imxrt1020-evk.dtb \arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi new file +167
-0@@ -0,0 +1,287 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Christoph Stoidner <[email protected]> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX93 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ + +#include "imx93-u-boot.dtsi" + +/ { + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog3>; + bootph-pre-ram; + bootph-some-ram; + }; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +&{/soc@0} { + bootph-all; + bootph-pre-ram; +}; + +&aips1 { + bootph-pre-ram; + bootph-all; +}; + +&aips2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&aips3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&iomuxc { + bootph-pre-ram; + bootph-some-ram; +}; + +®_usdhc2_vmmc { + u-boot,off-on-delay-us = <20000>; + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_reg_usdhc2_vmmc { + bootph-pre-ram; +}; + +&pinctrl_uart1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2_cd { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2_default { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2_100mhz { + bootph-pre-ram; + bootph-some-ram; +}; + +&pinctrl_usdhc2_200mhz { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&gpio4 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpuart1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&usdhc1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&usdhc2 { + bootph-pre-ram; + bootph-some-ram; + fsl,signal-voltage-switch-extra-delay-ms = <8>; +}; + +&lpi2c1 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpi2c2 { + bootph-pre-ram; + bootph-some-ram; +}; + +&lpi2c3 { + bootph-pre-ram; + bootph-some-ram; +}; + +&s4muap { + bootph-pre-ram; + bootph-some-ram; + status = "okay"; +}; + +&clk { + bootph-all; + bootph-pre-ram; + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-rates; + /delete-property/ assigned-clock-parents; +}; + +&osc_32k { + bootph-all; + bootph-pre-ram; +};
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi line 177
Quoted 10 lines
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi new file +10
-0+ +&osc_24m { + bootph-all; + bootph-pre-ram; +}; + +&clk_ext1 { + bootph-all; + bootph-pre-ram; +};
Can you add:
&wdog3 {
bootph-all;
bootph-pre-ram;
};here to also enable WDT in SPL, please.
Quoted 2,011 lines
arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi new file +110
-0+ +/* + * The two nodes below won't be needed once nxp,pca9451a + * support is added to the Linux kernel. + */ +&iomuxc { + pinctrl_lpi2c3: lpi2c3grp { + bootph-pre-ram; + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_pmic: pmicgrp { + bootph-pre-ram; + fsl,pins = < + MX93_PAD_ENET2_RD3__GPIO4_IO27 0x31e + >; + }; +}; + +&lpi2c3 { + bootph-pre-ram; + bootph-some-ram; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3>; + status = "okay"; + + pmic@25 { + bootph-pre-ram; + bootph-some-ram; + compatible = "nxp,pca9451a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + regulators { + bootph-pre-ram; + buck1: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <610000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "VDDQ_0V6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3_BUCK"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "VDD_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "PMIC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +};arch/arm/dts/imx93-phyboard-segin.dts new file +117
-0@@ -0,0 +1,117 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <[email protected]>, Christoph Stoidner <[email protected]> + * Copyright (C) 2024 Mathieu Othacehe <[email protected]> + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX93 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx93-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX93"; + compatible = "phytec,imx93-phyboard-segin", "phytec,imx93-phycore-som", + "fsl,imx93"; + + chosen { + stdout-path = &lpuart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + no-1-8-v; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x179e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x178e + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +};arch/arm/dts/imx93-phycore-som.dtsi new file +126
-0@@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 PHYTEC Messtechnik GmbH + * Author: Wadim Egorov <[email protected]>, Christoph Stoidner <[email protected]> + * Copyright (C) 2024 Mathieu Othacehe <[email protected]> + * + * Product homepage: + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ + */ + +#include <dt-bindings/leds/common.h> + +#include "imx93.dtsi" + +/{ + model = "PHYTEC phyCORE-i.MX93"; + compatible = "phytec,imx93-phycore-som", "fsl,imx93"; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +/* Ethernet */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>, + <&clk IMX93_CLK_ENET_REF>, + <&clk IMX93_CLK_ENET_REF_PHY>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>, <50000000>; + status = "okay"; + + mdio: mdio { + clock-frequency = <5000000>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__ENET1_MDC 0x50e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x502 + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RXC__ENET1_RX_ER 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x50e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x50e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x50e + MX93_PAD_ENET2_TD2__ENET1_TX_CLK 0x4000050e + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX93_PAD_SD1_CMD__USDHC1_CMD 0x1386 + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; +};arch/arm/mach-imx/imx9/Kconfig +6
-0@@ -37,9 +37,15 @@ config TARGET_IMX93_VAR_SOM select IMX93 select IMX9_LPDDR4X +config TARGET_PHYCORE_IMX93 + bool "phycore_imx93" + select IMX93 + select IMX9_LPDDR4X + endchoice source "board/freescale/imx93_evk/Kconfig" +source "board/phytec/phycore_imx93/Kconfig" source "board/variscite/imx93_var_som/Kconfig" endifboard/phytec/phycore_imx93/Kconfig new file +13
-0@@ -0,0 +1,13 @@ + +if TARGET_PHYCORE_IMX93 + +config SYS_BOARD + default "phycore_imx93" + +config SYS_VENDOR + default "phytec" + +config SYS_CONFIG_NAME + default "phycore_imx93" + +endifboard/phytec/phycore_imx93/MAINTAINERS new file +10
-0@@ -0,0 +1,10 @@ +phyCORE-i.MX93 +M: Mathieu Othacehe <[email protected]> +W: https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ +S: Maintained +F: arch/arm/dts/imx93-phyboard-segin.dts +F: arch/arm/dts/imx93-phycore-som.dtsi +F: arch/arm/dts/imx93-phyboard-segin-u-boot.dtsi +F: board/phytec/phycore_imx93/ +F: configs/imx93-phyboard-segin_defconfig +F: include/configs/phycore_imx93.hboard/phytec/phycore_imx93/Makefile new file +14
-0@@ -0,0 +1,14 @@ +# +# Copyright 2022 NXP +# Copyright (C) 2023 PHYTEC Messtechnik GmbH +# Christoph Stoidner <[email protected]> +# Copyright (C) 2024 Mathieu Othacehe <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += phycore_imx93.o + +ifdef CONFIG_SPL_BUILD +obj-y += spl.o lpddr4_timing.o +endifboard/phytec/phycore_imx93/lpddr4_timing.c new file +1546
-0@@ -0,0 +1,1546 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2023 NXP +* Copyright (C) 2023 PHYTEC Messtechnik GmbH +* Christoph Stoidner <[email protected]> +* +* Code generated with DDR Tool v1.0.0. +*/ + +#include <linux/kernel.h> +#include <asm/arch/ddr.h> + +static struct dram_cfg_param ddr_ddrc_cfg[] = { +/** Initialize DDRC registers **/ + {0x4e300110 ,0x44100001 }, + {0x4e300000 ,0x8000bf }, + {0x4e300008 ,0x0 }, + {0x4e300080 ,0x80000412 }, + {0x4e300084 ,0x0 }, + {0x4e300114 ,0x1002 }, + {0x4e300260 ,0x4080 }, + {0x4e300f04 ,0x80 }, + {0x4e300800 ,0x43b30002 }, + {0x4e300804 ,0x1f1f1f1f }, + {0x4e301000 ,0x0 }, + {0x4e301240 ,0x0 }, + {0x4e301244 ,0x0 }, + {0x4e301248 ,0x0 }, + {0x4e30124c ,0x0 }, + {0x4e301250 ,0x0 }, + {0x4e301254 ,0x0 }, + {0x4e301258 ,0x0 }, + {0x4e30125c ,0x0 }, + +}; + +/* dram fsp cfg */ +static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = { + { + { + {0x4e300100 ,0x24A0421B }, + {0x4e300104 ,0xF8EE001B }, + {0x4e300108 ,0x2F263233 }, + {0x4e30010C ,0x0005E18B }, + {0x4e300124 ,0x1C770000 }, + {0x4e300160 ,0x00009102 }, + {0x4e30016C ,0x35F00000 }, + {0x4e300170 ,0x8B0B0608 }, + {0x4e300250 ,0x00000028 }, + {0x4e300254 ,0x00FE00FE }, + {0x4e300258 ,0x00000008 }, + {0x4e30025C ,0x00000400 }, + {0x4e300300 ,0x224F2215 }, + {0x4e300304 ,0x00FE2213 }, + {0x4e300308 ,0x0A3C0E3C }, + }, + { + {0x01 ,0xE4 }, + {0x02 ,0x36 }, + {0x03 ,0xF2 }, + {0x0b ,0x46 }, + {0x0c ,0x11 }, + {0x0e ,0x11 }, + {0x16 ,0x04 }, + }, +0 , + }, + +}; + +/* PHY Initialize Configuration */ +static struct dram_cfg_param ddr_ddrphy_cfg[] = { + {0x100a0 ,0x0 }, + {0x100a1 ,0x1 }, + {0x100a2 ,0x2 }, + {0x100a3 ,0x3 }, + {0x100a4 ,0x4 }, + {0x100a5 ,0x5 }, + {0x100a6 ,0x6 }, + {0x100a7 ,0x7 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x1 }, + {0x110a2 ,0x2 }, + {0x110a3 ,0x3 }, + {0x110a4 ,0x4 }, + {0x110a5 ,0x5 }, + {0x110a6 ,0x6 }, + {0x110a7 ,0x7 }, + {0x1005f ,0x5ff }, + {0x1015f ,0x5ff }, + {0x1105f ,0x5ff }, + {0x1115f ,0x5ff }, + {0x55 ,0x1ff }, + {0x1055 ,0x1ff }, + {0x2055 ,0x1ff }, + {0x200c5 ,0x19 }, + {0x2002e ,0x2 }, + {0x90204 ,0x0 }, + {0x20024 ,0x1e3 }, + {0x2003a ,0x2 }, + {0x2007d ,0x212 }, + {0x2007c ,0x61 }, + {0x20056 ,0x3 }, + {0x1004d ,0x600 }, + {0x1014d ,0x600 }, + {0x1104d ,0x600 }, + {0x1114d ,0x600 }, + {0x10049 ,0xe00 }, + {0x10149 ,0xe00 }, + {0x11049 ,0xe00 }, + {0x11149 ,0xe00 }, + {0x43 ,0x60 }, + {0x1043 ,0x60 }, + {0x2043 ,0x60 }, + {0x20018 ,0x1 }, + {0x20075 ,0x4 }, + {0x20050 ,0x0 }, + {0x2009b ,0x2 }, + {0x20008 ,0x3a5 }, + {0x20088 ,0x9 }, + {0x200b2 ,0x10c }, + {0x10043 ,0x5a1 }, + {0x10143 ,0x5a1 }, + {0x11043 ,0x5a1 }, + {0x11143 ,0x5a1 }, + {0x200fa ,0x2 }, + {0x20019 ,0x1 }, + {0x200f0 ,0x600 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x4444 }, + {0x200f3 ,0x8888 }, + {0x200f4 ,0x5655 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0xf000 }, + {0x20025 ,0x0 }, + {0x2002d ,0x1 }, + {0x2002c ,0x0 }, + {0x20021 ,0x0 }, + {0x200c7 ,0x21 }, + {0x1200c7 ,0x21 }, + {0x200ca ,0x24 }, + {0x1200ca ,0x24 }, + +}; + +/* ddr phy trained csr */ +static struct dram_cfg_param ddr_ddrphy_trained_csr[] = { + {0x1005f ,0x0 }, + {0x1015f ,0x0 }, + {0x1105f ,0x0 }, + {0x1115f ,0x0 }, + {0x55 ,0x0 }, + {0x1055 ,0x0 }, + {0x2055 ,0x0 }, + {0x200c5 ,0x0 }, + {0x2002e ,0x0 }, + {0x90204 ,0x0 }, + {0x20024 ,0x0 }, + {0x2003a ,0x0 }, + {0x2007d ,0x0 }, + {0x2007c ,0x0 }, + {0x20056 ,0x0 }, + {0x1004d ,0x0 }, + {0x1014d ,0x0 }, + {0x1104d ,0x0 }, + {0x1114d ,0x0 }, + {0x10049 ,0x0 }, + {0x10149 ,0x0 }, + {0x11049 ,0x0 }, + {0x11149 ,0x0 }, + {0x43 ,0x0 }, + {0x1043 ,0x0 }, + {0x2043 ,0x0 }, + {0x20018 ,0x0 }, + {0x20075 ,0x0 }, + {0x20050 ,0x0 }, + {0x2009b ,0x0 }, + {0x20008 ,0x0 }, + {0x20088 ,0x0 }, + {0x200b2 ,0x0 }, + {0x10043 ,0x0 }, + {0x10143 ,0x0 }, + {0x11043 ,0x0 }, + {0x11143 ,0x0 }, + {0x200fa ,0x0 }, + {0x20019 ,0x0 }, + {0x200f0 ,0x0 }, + {0x200f1 ,0x0 }, + {0x200f2 ,0x0 }, + {0x200f3 ,0x0 }, + {0x200f4 ,0x0 }, + {0x200f5 ,0x0 }, + {0x200f6 ,0x0 }, + {0x200f7 ,0x0 }, + {0x20025 ,0x0 }, + {0x2002d ,0x0 }, + {0x2002c ,0x0 }, + {0xd0000 ,0x0 }, + {0x90000 ,0x0 }, + {0x90001 ,0x0 }, + {0x90002 ,0x0 }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x0 }, + {0x90029 ,0x0 }, + {0x9002a ,0x0 }, + {0x9002b ,0x0 }, + {0x9002c ,0x0 }, + {0x9002d ,0x0 }, + {0x9002e ,0x0 }, + {0x9002f ,0x0 }, + {0x90030 ,0x0 }, + {0x90031 ,0x0 }, + {0x90032 ,0x0 }, + {0x90033 ,0x0 }, + {0x90034 ,0x0 }, + {0x90035 ,0x0 }, + {0x90036 ,0x0 }, + {0x90037 ,0x0 }, + {0x90038 ,0x0 }, + {0x90039 ,0x0 }, + {0x9003a ,0x0 }, + {0x9003b ,0x0 }, + {0x9003c ,0x0 }, + {0x9003d ,0x0 }, + {0x9003e ,0x0 }, + {0x9003f ,0x0 }, + {0x90040 ,0x0 }, + {0x90041 ,0x0 }, + {0x90042 ,0x0 }, + {0x90043 ,0x0 }, + {0x90044 ,0x0 }, + {0x90045 ,0x0 }, + {0x90046 ,0x0 }, + {0x90047 ,0x0 }, + {0x90048 ,0x0 }, + {0x90049 ,0x0 }, + {0x9004a ,0x0 }, + {0x9004b ,0x0 }, + {0x9004c ,0x0 }, + {0x9004d ,0x0 }, + {0x9004e ,0x0 }, + {0x9004f ,0x0 }, + {0x90050 ,0x0 }, + {0x90051 ,0x0 }, + {0x90052 ,0x0 }, + {0x90053 ,0x0 }, + {0x90054 ,0x0 }, + {0x90055 ,0x0 }, + {0x90056 ,0x0 }, + {0x90057 ,0x0 }, + {0x90058 ,0x0 }, + {0x90059 ,0x0 }, + {0x9005a ,0x0 }, + {0x9005b ,0x0 }, + {0x9005c ,0x0 }, + {0x9005d ,0x0 }, + {0x9005e ,0x0 }, + {0x9005f ,0x0 }, + {0x90060 ,0x0 }, + {0x90061 ,0x0 }, + {0x90062 ,0x0 }, + {0x90063 ,0x0 }, + {0x90064 ,0x0 }, + {0x90065 ,0x0 }, + {0x90066 ,0x0 }, + {0x90067 ,0x0 }, + {0x90068 ,0x0 }, + {0x90069 ,0x0 }, + {0x9006a ,0x0 }, + {0x9006b ,0x0 }, + {0x9006c ,0x0 }, + {0x9006d ,0x0 }, + {0x9006e ,0x0 }, + {0x9006f ,0x0 }, + {0x90070 ,0x0 }, + {0x90071 ,0x0 }, + {0x90072 ,0x0 }, + {0x90073 ,0x0 }, + {0x90074 ,0x0 }, + {0x90075 ,0x0 }, + {0x90076 ,0x0 }, + {0x90077 ,0x0 }, + {0x90078 ,0x0 }, + {0x90079 ,0x0 }, + {0x9007a ,0x0 }, + {0x9007b ,0x0 }, + {0x9007c ,0x0 }, + {0x9007d ,0x0 }, + {0x9007e ,0x0 }, + {0x9007f ,0x0 }, + {0x90080 ,0x0 }, + {0x90081 ,0x0 }, + {0x90082 ,0x0 }, + {0x90083 ,0x0 }, + {0x90084 ,0x0 }, + {0x90085 ,0x0 }, + {0x90086 ,0x0 }, + {0x90087 ,0x0 }, + {0x90088 ,0x0 }, + {0x90089 ,0x0 }, + {0x9008a ,0x0 }, + {0x9008b ,0x0 }, + {0x9008c ,0x0 }, + {0x9008d ,0x0 }, + {0x9008e ,0x0 }, + {0x9008f ,0x0 }, + {0x90090 ,0x0 }, + {0x90091 ,0x0 }, + {0x90092 ,0x0 }, + {0x90093 ,0x0 }, + {0x90094 ,0x0 }, + {0x90095 ,0x0 }, + {0x90096 ,0x0 }, + {0x90097 ,0x0 }, + {0x90098 ,0x0 }, + {0x90099 ,0x0 }, + {0x9009a ,0x0 }, + {0x9009b ,0x0 }, + {0x9009c ,0x0 }, + {0x9009d ,0x0 }, + {0x9009e ,0x0 }, + {0x9009f ,0x0 }, + {0x900a0 ,0x0 }, + {0x900a1 ,0x0 }, + {0x900a2 ,0x0 }, + {0x900a3 ,0x0 }, + {0x900a4 ,0x0 }, + {0x900a5 ,0x0 }, + {0x900a6 ,0x0 }, + {0x900a7 ,0x0 }, + {0x900a8 ,0x0 }, + {0x900a9 ,0x0 }, + {0x40000 ,0x0 }, + {0x40020 ,0x0 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x0 }, + {0x40021 ,0x0 }, + {0x40041 ,0x0 }, + {0x40061 ,0x0 }, + {0x40002 ,0x0 }, + {0x40022 ,0x0 }, + {0x40042 ,0x0 }, + {0x40062 ,0x0 }, + {0x40003 ,0x0 }, + {0x40023 ,0x0 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x0 }, + {0x40024 ,0x0 }, + {0x40044 ,0x0 }, + {0x40064 ,0x0 }, + {0x40005 ,0x0 }, + {0x40025 ,0x0 }, + {0x40045 ,0x0 }, + {0x40065 ,0x0 }, + {0x40006 ,0x0 }, + {0x40026 ,0x0 }, + {0x40046 ,0x0 }, + {0x40066 ,0x0 }, + {0x40007 ,0x0 }, + {0x40027 ,0x0 }, + {0x40047 ,0x0 }, + {0x40067 ,0x0 }, + {0x40008 ,0x0 }, + {0x40028 ,0x0 }, + {0x40048 ,0x0 }, + {0x40068 ,0x0 }, + {0x40009 ,0x0 }, + {0x40029 ,0x0 }, + {0x40049 ,0x0 }, + {0x40069 ,0x0 }, + {0x4000a ,0x0 }, + {0x4002a ,0x0 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x0 }, + {0x4002b ,0x0 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x0 }, + {0x4002c ,0x0 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0x0 }, + {0x4002d ,0x0 }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x0 }, + {0x4002e ,0x0 }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x0 }, + {0x4002f ,0x0 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x0 }, + {0x40030 ,0x0 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x0 }, + {0x40031 ,0x0 }, + {0x40051 ,0x0 }, + {0x40071 ,0x0 }, + {0x40012 ,0x0 }, + {0x40032 ,0x0 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x0 }, + {0x40033 ,0x0 }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x0 }, + {0x40034 ,0x0 }, + {0x40054 ,0x0 }, + {0x40074 ,0x0 }, + {0x40015 ,0x0 }, + {0x40035 ,0x0 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x0 }, + {0x40036 ,0x0 }, + {0x40056 ,0x0 }, + {0x40076 ,0x0 }, + {0x40017 ,0x0 }, + {0x40037 ,0x0 }, + {0x40057 ,0x0 }, + {0x40077 ,0x0 }, + {0x40018 ,0x0 }, + {0x40038 ,0x0 }, + {0x40058 ,0x0 }, + {0x40078 ,0x0 }, + {0x40019 ,0x0 }, + {0x40039 ,0x0 }, + {0x40059 ,0x0 }, + {0x40079 ,0x0 }, + {0x4001a ,0x0 }, + {0x4003a ,0x0 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900aa ,0x0 }, + {0x900ab ,0x0 }, + {0x900ac ,0x0 }, + {0x900ad ,0x0 }, + {0x900ae ,0x0 }, + {0x900af ,0x0 }, + {0x900b0 ,0x0 }, + {0x900b1 ,0x0 }, + {0x900b2 ,0x0 }, + {0x900b3 ,0x0 }, + {0x900b4 ,0x0 }, + {0x900b5 ,0x0 }, + {0x900b6 ,0x0 }, + {0x900b7 ,0x0 }, + {0x900b8 ,0x0 }, + {0x900b9 ,0x0 }, + {0x900ba ,0x0 }, + {0x900bb ,0x0 }, + {0x900bc ,0x0 }, + {0x900bd ,0x0 }, + {0x900be ,0x0 }, + {0x900bf ,0x0 }, + {0x900c0 ,0x0 }, + {0x900c1 ,0x0 }, + {0x900c2 ,0x0 }, + {0x900c3 ,0x0 }, + {0x900c4 ,0x0 }, + {0x900c5 ,0x0 }, + {0x900c6 ,0x0 }, + {0x900c7 ,0x0 }, + {0x900c8 ,0x0 }, + {0x900c9 ,0x0 }, + {0x900ca ,0x0 }, + {0x900cb ,0x0 }, + {0x900cc ,0x0 }, + {0x900cd ,0x0 }, + {0x900ce ,0x0 }, + {0x900cf ,0x0 }, + {0x900d0 ,0x0 }, + {0x900d1 ,0x0 }, + {0x900d2 ,0x0 }, + {0x900d3 ,0x0 }, + {0x900d4 ,0x0 }, + {0x900d5 ,0x0 }, + {0x900d6 ,0x0 }, + {0x900d7 ,0x0 }, + {0x900d8 ,0x0 }, + {0x900d9 ,0x0 }, + {0x900da ,0x0 }, + {0x900db ,0x0 }, + {0x900dc ,0x0 }, + {0x900dd ,0x0 }, + {0x900de ,0x0 }, + {0x900df ,0x0 }, + {0x900e0 ,0x0 }, + {0x900e1 ,0x0 }, + {0x900e2 ,0x0 }, + {0x900e3 ,0x0 }, + {0x900e4 ,0x0 }, + {0x900e5 ,0x0 }, + {0x900e6 ,0x0 }, + {0x900e7 ,0x0 }, + {0x900e8 ,0x0 }, + {0x900e9 ,0x0 }, + {0x900ea ,0x0 }, + {0x900eb ,0x0 }, + {0x900ec ,0x0 }, + {0x900ed ,0x0 }, + {0x900ee ,0x0 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x0 }, + {0x900f1 ,0x0 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0x0 }, + {0x900f4 ,0x0 }, + {0x900f5 ,0x0 }, + {0x900f6 ,0x0 }, + {0x900f7 ,0x0 }, + {0x900f8 ,0x0 }, + {0x900f9 ,0x0 }, + {0x900fa ,0x0 }, + {0x900fb ,0x0 }, + {0x900fc ,0x0 }, + {0x900fd ,0x0 }, + {0x900fe ,0x0 }, + {0x900ff ,0x0 }, + {0x90100 ,0x0 }, + {0x90101 ,0x0 }, + {0x90102 ,0x0 }, + {0x90103 ,0x0 }, + {0x90104 ,0x0 }, + {0x90105 ,0x0 }, + {0x90106 ,0x0 }, + {0x90107 ,0x0 }, + {0x90108 ,0x0 }, + {0x90109 ,0x0 }, + {0x9010a ,0x0 }, + {0x9010b ,0x0 }, + {0x9010c ,0x0 }, + {0x9010d ,0x0 }, + {0x9010e ,0x0 }, + {0x9010f ,0x0 }, + {0x90110 ,0x0 }, + {0x90111 ,0x0 }, + {0x90112 ,0x0 }, + {0x90113 ,0x0 }, + {0x90114 ,0x0 }, + {0x90115 ,0x0 }, + {0x90116 ,0x0 }, + {0x90117 ,0x0 }, + {0x90118 ,0x0 }, + {0x90119 ,0x0 }, + {0x9011a ,0x0 }, + {0x9011b ,0x0 }, + {0x9011c ,0x0 }, + {0x9011d ,0x0 }, + {0x9011e ,0x0 }, + {0x9011f ,0x0 }, + {0x90120 ,0x0 }, + {0x90121 ,0x0 }, + {0x90122 ,0x0 }, + {0x90123 ,0x0 }, + {0x90124 ,0x0 }, + {0x90125 ,0x0 }, + {0x90126 ,0x0 }, + {0x90127 ,0x0 }, + {0x90128 ,0x0 }, + {0x90129 ,0x0 }, + {0x9012a ,0x0 }, + {0x9012b ,0x0 }, + {0x9012c ,0x0 }, + {0x9012d ,0x0 }, + {0x9012e ,0x0 }, + {0x9012f ,0x0 }, + {0x90130 ,0x0 }, + {0x90131 ,0x0 }, + {0x90132 ,0x0 }, + {0x90133 ,0x0 }, + {0x90134 ,0x0 }, + {0x90135 ,0x0 }, + {0x90136 ,0x0 }, + {0x90137 ,0x0 }, + {0x90138 ,0x0 }, + {0x90139 ,0x0 }, + {0x9013a ,0x0 }, + {0x9013b ,0x0 }, + {0x9013c ,0x0 }, + {0x9013d ,0x0 }, + {0x9013e ,0x0 }, + {0x9013f ,0x0 }, + {0x90140 ,0x0 }, + {0x90141 ,0x0 }, + {0x90142 ,0x0 }, + {0x90143 ,0x0 }, + {0x90144 ,0x0 }, + {0x90145 ,0x0 }, + {0x90146 ,0x0 }, + {0x90147 ,0x0 }, + {0x90148 ,0x0 }, + {0x90149 ,0x0 }, + {0x9014a ,0x0 }, + {0x9014b ,0x0 }, + {0x9014c ,0x0 }, + {0x9014d ,0x0 }, + {0x9014e ,0x0 }, + {0x9014f ,0x0 }, + {0x90150 ,0x0 }, + {0x90151 ,0x0 }, + {0x90152 ,0x0 }, + {0x90153 ,0x0 }, + {0x90154 ,0x0 }, + {0x90155 ,0x0 }, + {0x90156 ,0x0 }, + {0x90157 ,0x0 }, + {0x90158 ,0x0 }, + {0x90159 ,0x0 }, + {0x9015a ,0x0 }, + {0x9015b ,0x0 }, + {0x9015c ,0x0 }, + {0x9015d ,0x0 }, + {0x9015e ,0x0 }, + {0x9015f ,0x0 }, + {0x90160 ,0x0 }, + {0x90161 ,0x0 }, + {0x90162 ,0x0 }, + {0x90163 ,0x0 }, + {0x90164 ,0x0 }, + {0x90165 ,0x0 }, + {0x90166 ,0x0 }, + {0x90167 ,0x0 }, + {0x90168 ,0x0 }, + {0x90169 ,0x0 }, + {0x9016a ,0x0 }, + {0x9016b ,0x0 }, + {0x9016c ,0x0 }, + {0x9016d ,0x0 }, + {0x9016e ,0x0 }, + {0x9016f ,0x0 }, + {0x90170 ,0x0 }, + {0x90171 ,0x0 }, + {0x90172 ,0x0 }, + {0x90173 ,0x0 }, + {0x90174 ,0x0 }, + {0x90175 ,0x0 }, + {0x90176 ,0x0 }, + {0x90177 ,0x0 }, + {0x90178 ,0x0 }, + {0x90179 ,0x0 }, + {0x9017a ,0x0 }, + {0x9017b ,0x0 }, + {0x9017c ,0x0 }, + {0x9017d ,0x0 }, + {0x9017e ,0x0 }, + {0x9017f ,0x0 }, + {0x90180 ,0x0 }, + {0x90181 ,0x0 }, + {0x90182 ,0x0 }, + {0x90183 ,0x0 }, + {0x90184 ,0x0 }, + {0x90006 ,0x0 }, + {0x90007 ,0x0 }, + {0x90008 ,0x0 }, + {0x90009 ,0x0 }, + {0x9000a ,0x0 }, + {0x9000b ,0x0 }, + {0xd00e7 ,0x0 }, + {0x90017 ,0x0 }, + {0x9001f ,0x0 }, + {0x90026 ,0x0 }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x0 }, + {0x400d2 ,0x0 }, + {0x400d3 ,0x0 }, + {0x400d4 ,0x0 }, + {0x400d5 ,0x0 }, + {0x400d6 ,0x0 }, + {0x400d7 ,0x0 }, + {0x200be ,0x0 }, + {0x2000b ,0x0 }, + {0x2000c ,0x0 }, + {0x2000d ,0x0 }, + {0x2000e ,0x0 }, + {0x9000c ,0x0 }, + {0x9000d ,0x0 }, + {0x9000e ,0x0 }, + {0x9000f ,0x0 }, + {0x90010 ,0x0 }, + {0x90011 ,0x0 }, + {0x90012 ,0x0 }, + {0x90013 ,0x0 }, + {0x20010 ,0x0 }, + {0x20011 ,0x0 }, + {0x40080 ,0x0 }, + {0x40081 ,0x0 }, + {0x40082 ,0x0 }, + {0x40083 ,0x0 }, + {0x40084 ,0x0 }, + {0x40085 ,0x0 }, + {0x400fd ,0x0 }, + {0x400f1 ,0x0 }, + {0x10011 ,0x0 }, + {0x10012 ,0x0 }, + {0x10013 ,0x0 }, + {0x10018 ,0x0 }, + {0x10002 ,0x0 }, + {0x100b2 ,0x0 }, + {0x101b4 ,0x0 }, + {0x102b4 ,0x0 }, + {0x103b4 ,0x0 }, + {0x104b4 ,0x0 }, + {0x105b4 ,0x0 }, + {0x106b4 ,0x0 }, + {0x107b4 ,0x0 }, + {0x108b4 ,0x0 }, + {0x11011 ,0x0 }, + {0x11012 ,0x0 }, + {0x11013 ,0x0 }, + {0x11018 ,0x0 }, + {0x11002 ,0x0 }, + {0x110b2 ,0x0 }, + {0x111b4 ,0x0 }, + {0x112b4 ,0x0 }, + {0x113b4 ,0x0 }, + {0x114b4 ,0x0 }, + {0x115b4 ,0x0 }, + {0x116b4 ,0x0 }, + {0x117b4 ,0x0 }, + {0x118b4 ,0x0 }, + {0x20089 ,0x0 }, + {0xc0080 ,0x0 }, + {0x200cb ,0x0 }, + {0x10068 ,0x0 }, + {0x10069 ,0x0 }, + {0x10168 ,0x0 }, + {0x10169 ,0x0 }, + {0x10268 ,0x0 }, + {0x10269 ,0x0 }, + {0x10368 ,0x0 }, + {0x10369 ,0x0 }, + {0x10468 ,0x0 }, + {0x10469 ,0x0 }, + {0x10568 ,0x0 }, + {0x10569 ,0x0 }, + {0x10668 ,0x0 }, + {0x10669 ,0x0 }, + {0x10768 ,0x0 }, + {0x10769 ,0x0 }, + {0x10868 ,0x0 }, + {0x10869 ,0x0 }, + {0x100aa ,0x0 }, + {0x10062 ,0x0 }, + {0x10001 ,0x0 }, + {0x100a0 ,0x0 }, + {0x100a1 ,0x0 }, + {0x100a2 ,0x0 }, + {0x100a3 ,0x0 }, + {0x100a4 ,0x0 }, + {0x100a5 ,0x0 }, + {0x100a6 ,0x0 }, + {0x100a7 ,0x0 }, + {0x11068 ,0x0 }, + {0x11069 ,0x0 }, + {0x11168 ,0x0 }, + {0x11169 ,0x0 }, + {0x11268 ,0x0 }, + {0x11269 ,0x0 }, + {0x11368 ,0x0 }, + {0x11369 ,0x0 }, + {0x11468 ,0x0 }, + {0x11469 ,0x0 }, + {0x11568 ,0x0 }, + {0x11569 ,0x0 }, + {0x11668 ,0x0 }, + {0x11669 ,0x0 }, + {0x11768 ,0x0 }, + {0x11769 ,0x0 }, + {0x11868 ,0x0 }, + {0x11869 ,0x0 }, + {0x110aa ,0x0 }, + {0x11062 ,0x0 }, + {0x11001 ,0x0 }, + {0x110a0 ,0x0 }, + {0x110a1 ,0x0 }, + {0x110a2 ,0x0 }, + {0x110a3 ,0x0 }, + {0x110a4 ,0x0 }, + {0x110a5 ,0x0 }, + {0x110a6 ,0x0 }, + {0x110a7 ,0x0 }, + {0x80 ,0x0 }, + {0x1080 ,0x0 }, + {0x2080 ,0x0 }, + {0x10020 ,0x0 }, + {0x10080 ,0x0 }, + {0x10081 ,0x0 }, + {0x100d0 ,0x0 }, + {0x100d1 ,0x0 }, + {0x1008c ,0x0 }, + {0x1008d ,0x0 }, + {0x10180 ,0x0 }, + {0x10181 ,0x0 }, + {0x101d0 ,0x0 }, + {0x101d1 ,0x0 }, + {0x1018c ,0x0 }, + {0x1018d ,0x0 }, + {0x100c0 ,0x0 }, + {0x100c1 ,0x0 }, + {0x101c0 ,0x0 }, + {0x101c1 ,0x0 }, + {0x102c0 ,0x0 }, + {0x102c1 ,0x0 }, + {0x103c0 ,0x0 }, + {0x103c1 ,0x0 }, + {0x104c0 ,0x0 }, + {0x104c1 ,0x0 }, + {0x105c0 ,0x0 }, + {0x105c1 ,0x0 }, + {0x106c0 ,0x0 }, + {0x106c1 ,0x0 }, + {0x107c0 ,0x0 }, + {0x107c1 ,0x0 }, + {0x108c0 ,0x0 }, + {0x108c1 ,0x0 }, + {0x100ae ,0x0 }, + {0x100af ,0x0 }, + {0x11020 ,0x0 }, + {0x11080 ,0x0 }, + {0x11081 ,0x0 }, + {0x110d0 ,0x0 }, + {0x110d1 ,0x0 }, + {0x1108c ,0x0 }, + {0x1108d ,0x0 }, + {0x11180 ,0x0 }, + {0x11181 ,0x0 }, + {0x111d0 ,0x0 }, + {0x111d1 ,0x0 }, + {0x1118c ,0x0 }, + {0x1118d ,0x0 }, + {0x110c0 ,0x0 }, + {0x110c1 ,0x0 }, + {0x111c0 ,0x0 }, + {0x111c1 ,0x0 }, + {0x112c0 ,0x0 }, + {0x112c1 ,0x0 }, + {0x113c0 ,0x0 }, + {0x113c1 ,0x0 }, + {0x114c0 ,0x0 }, + {0x114c1 ,0x0 }, + {0x115c0 ,0x0 }, + {0x115c1 ,0x0 }, + {0x116c0 ,0x0 }, + {0x116c1 ,0x0 }, + {0x117c0 ,0x0 }, + {0x117c1 ,0x0 }, + {0x118c0 ,0x0 }, + {0x118c1 ,0x0 }, + {0x110ae ,0x0 }, + {0x110af ,0x0 }, + {0x90201 ,0x0 }, + {0x90202 ,0x0 }, + {0x90203 ,0x0 }, + {0x90205 ,0x0 }, + {0x90206 ,0x0 }, + {0x90207 ,0x0 }, + {0x90208 ,0x0 }, + {0x20020 ,0x0 }, + {0x20077 ,0x0 }, + {0x20072 ,0x0 }, + {0x20073 ,0x0 }, + {0x400c0 ,0x0 }, + {0x10040 ,0x0 }, + {0x10140 ,0x0 }, + {0x10240 ,0x0 }, + {0x10340 ,0x0 }, + {0x10440 ,0x0 }, + {0x10540 ,0x0 }, + {0x10640 ,0x0 }, + {0x10740 ,0x0 }, + {0x10840 ,0x0 }, + {0x11040 ,0x0 }, + {0x11140 ,0x0 }, + {0x11240 ,0x0 }, + {0x11340 ,0x0 }, + {0x11440 ,0x0 }, + {0x11540 ,0x0 }, + {0x11640 ,0x0 }, + {0x11740 ,0x0 }, + {0x11840 ,0x0 }, + +}; + +/* P0 message block parameter for training firmware */ +static struct dram_cfg_param ddr_fsp0_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xe94 }, + {0x54004 ,0x4 }, + {0x54006 ,0x15 }, + {0x54008 ,0x131f }, + {0x54009 ,0xc8 }, + {0x5400b ,0x4 }, + {0x5400d ,0x100 }, + {0x5400f ,0x100 }, + {0x54012 ,0x110 }, + {0x54019 ,0x36e4 }, + {0x5401a ,0xf2 }, + {0x5401b ,0x1146 }, + {0x5401c ,0x1108 }, + {0x5401e ,0x4 }, + {0x5401f ,0x36e4 }, + {0x54020 ,0xf2 }, + {0x54021 ,0x1146 }, + {0x54022 ,0x1108 }, + {0x54024 ,0x4 }, + {0x54032 ,0xe400 }, + {0x54033 ,0xf236 }, + {0x54034 ,0x4600 }, + {0x54035 ,0x811 }, + {0x54036 ,0x11 }, + {0x54037 ,0x400 }, + {0x54038 ,0xe400 }, + {0x54039 ,0xf236 }, + {0x5403a ,0x4600 }, + {0x5403b ,0x811 }, + {0x5403c ,0x11 }, + {0x5403d ,0x400 }, + {0xd0000 ,0x1 } +}; + +/* P0 2D message block parameter for training firmware */ +static struct dram_cfg_param ddr_fsp0_2d_cfg[] = { + {0xd0000 ,0x0 }, + {0x54003 ,0xe94 }, + {0x54004 ,0x4 }, + {0x54006 ,0x15 }, + {0x54008 ,0x61 }, + {0x54009 ,0xc8 }, + {0x5400b ,0x4 }, + {0x5400d ,0x100 }, + {0x5400f ,0x100 }, + {0x54010 ,0x2080 }, + {0x54012 ,0x110 }, + {0x54019 ,0x36e4 }, + {0x5401a ,0xf2 }, + {0x5401b ,0x1146 }, + {0x5401c ,0x1108 }, + {0x5401e ,0x4 }, + {0x5401f ,0x36e4 }, + {0x54020 ,0xf2 }, + {0x54021 ,0x1146 }, + {0x54022 ,0x1108 }, + {0x54024 ,0x4 }, + {0x54032 ,0xe400 }, + {0x54033 ,0xf236 }, + {0x54034 ,0x4600 }, + {0x54035 ,0x811 }, + {0x54036 ,0x11 }, + {0x54037 ,0x400 }, + {0x54038 ,0xe400 }, + {0x54039 ,0xf236 }, + {0x5403a ,0x4600 }, + {0x5403b ,0x811 }, + {0x5403c ,0x11 }, + {0x5403d ,0x400 }, + {0xd0000 ,0x1 } +}; + +/* DRAM PHY init engine image */ +static struct dram_cfg_param ddr_phy_pie[] = { + {0xd0000 ,0x0 }, + {0x90000 ,0x10 }, + {0x90001 ,0x400 }, + {0x90002 ,0x10e }, + {0x90003 ,0x0 }, + {0x90004 ,0x0 }, + {0x90005 ,0x8 }, + {0x90029 ,0xb }, + {0x9002a ,0x480 }, + {0x9002b ,0x109 }, + {0x9002c ,0x8 }, + {0x9002d ,0x448 }, + {0x9002e ,0x139 }, + {0x9002f ,0x8 }, + {0x90030 ,0x478 }, + {0x90031 ,0x109 }, + {0x90032 ,0x0 }, + {0x90033 ,0xe8 }, + {0x90034 ,0x109 }, + {0x90035 ,0x2 }, + {0x90036 ,0x10 }, + {0x90037 ,0x139 }, + {0x90038 ,0xb }, + {0x90039 ,0x7c0 }, + {0x9003a ,0x139 }, + {0x9003b ,0x44 }, + {0x9003c ,0x633 }, + {0x9003d ,0x159 }, + {0x9003e ,0x14f }, + {0x9003f ,0x630 }, + {0x90040 ,0x159 }, + {0x90041 ,0x47 }, + {0x90042 ,0x633 }, + {0x90043 ,0x149 }, + {0x90044 ,0x4f }, + {0x90045 ,0x633 }, + {0x90046 ,0x179 }, + {0x90047 ,0x8 }, + {0x90048 ,0xe0 }, + {0x90049 ,0x109 }, + {0x9004a ,0x0 }, + {0x9004b ,0x7c8 }, + {0x9004c ,0x109 }, + {0x9004d ,0x0 }, + {0x9004e ,0x1 }, + {0x9004f ,0x8 }, + {0x90050 ,0x30 }, + {0x90051 ,0x65a }, + {0x90052 ,0x9 }, + {0x90053 ,0x0 }, + {0x90054 ,0x45a }, + {0x90055 ,0x9 }, + {0x90056 ,0x0 }, + {0x90057 ,0x448 }, + {0x90058 ,0x109 }, + {0x90059 ,0x40 }, + {0x9005a ,0x633 }, + {0x9005b ,0x179 }, + {0x9005c ,0x1 }, + {0x9005d ,0x618 }, + {0x9005e ,0x109 }, + {0x9005f ,0x40c0 }, + {0x90060 ,0x633 }, + {0x90061 ,0x149 }, + {0x90062 ,0x8 }, + {0x90063 ,0x4 }, + {0x90064 ,0x48 }, + {0x90065 ,0x4040 }, + {0x90066 ,0x633 }, + {0x90067 ,0x149 }, + {0x90068 ,0x0 }, + {0x90069 ,0x4 }, + {0x9006a ,0x48 }, + {0x9006b ,0x40 }, + {0x9006c ,0x633 }, + {0x9006d ,0x149 }, + {0x9006e ,0x0 }, + {0x9006f ,0x658 }, + {0x90070 ,0x109 }, + {0x90071 ,0x10 }, + {0x90072 ,0x4 }, + {0x90073 ,0x18 }, + {0x90074 ,0x0 }, + {0x90075 ,0x4 }, + {0x90076 ,0x78 }, + {0x90077 ,0x549 }, + {0x90078 ,0x633 }, + {0x90079 ,0x159 }, + {0x9007a ,0xd49 }, + {0x9007b ,0x633 }, + {0x9007c ,0x159 }, + {0x9007d ,0x94a }, + {0x9007e ,0x633 }, + {0x9007f ,0x159 }, + {0x90080 ,0x441 }, + {0x90081 ,0x633 }, + {0x90082 ,0x149 }, + {0x90083 ,0x42 }, + {0x90084 ,0x633 }, + {0x90085 ,0x149 }, + {0x90086 ,0x1 }, + {0x90087 ,0x633 }, + {0x90088 ,0x149 }, + {0x90089 ,0x0 }, + {0x9008a ,0xe0 }, + {0x9008b ,0x109 }, + {0x9008c ,0xa }, + {0x9008d ,0x10 }, + {0x9008e ,0x109 }, + {0x9008f ,0x9 }, + {0x90090 ,0x3c0 }, + {0x90091 ,0x149 }, + {0x90092 ,0x9 }, + {0x90093 ,0x3c0 }, + {0x90094 ,0x159 }, + {0x90095 ,0x18 }, + {0x90096 ,0x10 }, + {0x90097 ,0x109 }, + {0x90098 ,0x0 }, + {0x90099 ,0x3c0 }, + {0x9009a ,0x109 }, + {0x9009b ,0x18 }, + {0x9009c ,0x4 }, + {0x9009d ,0x48 }, + {0x9009e ,0x18 }, + {0x9009f ,0x4 }, + {0x900a0 ,0x58 }, + {0x900a1 ,0xb }, + {0x900a2 ,0x10 }, + {0x900a3 ,0x109 }, + {0x900a4 ,0x1 }, + {0x900a5 ,0x10 }, + {0x900a6 ,0x109 }, + {0x900a7 ,0x5 }, + {0x900a8 ,0x7c0 }, + {0x900a9 ,0x109 }, + {0x40000 ,0x811 }, + {0x40020 ,0x880 }, + {0x40040 ,0x0 }, + {0x40060 ,0x0 }, + {0x40001 ,0x4008 }, + {0x40021 ,0x83 }, + {0x40041 ,0x4f }, + {0x40061 ,0x0 }, + {0x40002 ,0x4040 }, + {0x40022 ,0x83 }, + {0x40042 ,0x51 }, + {0x40062 ,0x0 }, + {0x40003 ,0x811 }, + {0x40023 ,0x880 }, + {0x40043 ,0x0 }, + {0x40063 ,0x0 }, + {0x40004 ,0x720 }, + {0x40024 ,0xf }, + {0x40044 ,0x1740 }, + {0x40064 ,0x0 }, + {0x40005 ,0x16 }, + {0x40025 ,0x83 }, + {0x40045 ,0x4b }, + {0x40065 ,0x0 }, + {0x40006 ,0x716 }, + {0x40026 ,0xf }, + {0x40046 ,0x2001 }, + {0x40066 ,0x0 }, + {0x40007 ,0x716 }, + {0x40027 ,0xf }, + {0x40047 ,0x2800 }, + {0x40067 ,0x0 }, + {0x40008 ,0x716 }, + {0x40028 ,0xf }, + {0x40048 ,0xf00 }, + {0x40068 ,0x0 }, + {0x40009 ,0x720 }, + {0x40029 ,0xf }, + {0x40049 ,0x1400 }, + {0x40069 ,0x0 }, + {0x4000a ,0xe08 }, + {0x4002a ,0xc15 }, + {0x4004a ,0x0 }, + {0x4006a ,0x0 }, + {0x4000b ,0x625 }, + {0x4002b ,0x15 }, + {0x4004b ,0x0 }, + {0x4006b ,0x0 }, + {0x4000c ,0x4028 }, + {0x4002c ,0x80 }, + {0x4004c ,0x0 }, + {0x4006c ,0x0 }, + {0x4000d ,0xe08 }, + {0x4002d ,0xc1a }, + {0x4004d ,0x0 }, + {0x4006d ,0x0 }, + {0x4000e ,0x625 }, + {0x4002e ,0x1a }, + {0x4004e ,0x0 }, + {0x4006e ,0x0 }, + {0x4000f ,0x4040 }, + {0x4002f ,0x80 }, + {0x4004f ,0x0 }, + {0x4006f ,0x0 }, + {0x40010 ,0x2604 }, + {0x40030 ,0x15 }, + {0x40050 ,0x0 }, + {0x40070 ,0x0 }, + {0x40011 ,0x708 }, + {0x40031 ,0x5 }, + {0x40051 ,0x0 }, + {0x40071 ,0x2002 }, + {0x40012 ,0x8 }, + {0x40032 ,0x80 }, + {0x40052 ,0x0 }, + {0x40072 ,0x0 }, + {0x40013 ,0x2604 }, + {0x40033 ,0x1a }, + {0x40053 ,0x0 }, + {0x40073 ,0x0 }, + {0x40014 ,0x708 }, + {0x40034 ,0xa }, + {0x40054 ,0x0 }, + {0x40074 ,0x2002 }, + {0x40015 ,0x4040 }, + {0x40035 ,0x80 }, + {0x40055 ,0x0 }, + {0x40075 ,0x0 }, + {0x40016 ,0x60a }, + {0x40036 ,0x15 }, + {0x40056 ,0x1200 }, + {0x40076 ,0x0 }, + {0x40017 ,0x61a }, + {0x40037 ,0x15 }, + {0x40057 ,0x1300 }, + {0x40077 ,0x0 }, + {0x40018 ,0x60a }, + {0x40038 ,0x1a }, + {0x40058 ,0x1200 }, + {0x40078 ,0x0 }, + {0x40019 ,0x642 }, + {0x40039 ,0x1a }, + {0x40059 ,0x1300 }, + {0x40079 ,0x0 }, + {0x4001a ,0x4808 }, + {0x4003a ,0x880 }, + {0x4005a ,0x0 }, + {0x4007a ,0x0 }, + {0x900aa ,0x0 }, + {0x900ab ,0x790 }, + {0x900ac ,0x11a }, + {0x900ad ,0x8 }, + {0x900ae ,0x7aa }, + {0x900af ,0x2a }, + {0x900b0 ,0x10 }, + {0x900b1 ,0x7b2 }, + {0x900b2 ,0x2a }, + {0x900b3 ,0x0 }, + {0x900b4 ,0x7c8 }, + {0x900b5 ,0x109 }, + {0x900b6 ,0x10 }, + {0x900b7 ,0x10 }, + {0x900b8 ,0x109 }, + {0x900b9 ,0x10 }, + {0x900ba ,0x2a8 }, + {0x900bb ,0x129 }, + {0x900bc ,0x8 }, + {0x900bd ,0x370 }, + {0x900be ,0x129 }, + {0x900bf ,0xa }, + {0x900c0 ,0x3c8 }, + {0x900c1 ,0x1a9 }, + {0x900c2 ,0xc }, + {0x900c3 ,0x408 }, + {0x900c4 ,0x199 }, + {0x900c5 ,0x14 }, + {0x900c6 ,0x790 }, + {0x900c7 ,0x11a }, + {0x900c8 ,0x8 }, + {0x900c9 ,0x4 }, + {0x900ca ,0x18 }, + {0x900cb ,0xe }, + {0x900cc ,0x408 }, + {0x900cd ,0x199 }, + {0x900ce ,0x8 }, + {0x900cf ,0x8568 }, + {0x900d0 ,0x108 }, + {0x900d1 ,0x18 }, + {0x900d2 ,0x790 }, + {0x900d3 ,0x16a }, + {0x900d4 ,0x8 }, + {0x900d5 ,0x1d8 }, + {0x900d6 ,0x169 }, + {0x900d7 ,0x10 }, + {0x900d8 ,0x8558 }, + {0x900d9 ,0x168 }, + {0x900da ,0x1ff8 }, + {0x900db ,0x85a8 }, + {0x900dc ,0x1e8 }, + {0x900dd ,0x50 }, + {0x900de ,0x798 }, + {0x900df ,0x16a }, + {0x900e0 ,0x60 }, + {0x900e1 ,0x7a0 }, + {0x900e2 ,0x16a }, + {0x900e3 ,0x8 }, + {0x900e4 ,0x8310 }, + {0x900e5 ,0x168 }, + {0x900e6 ,0x8 }, + {0x900e7 ,0xa310 }, + {0x900e8 ,0x168 }, + {0x900e9 ,0xa }, + {0x900ea ,0x408 }, + {0x900eb ,0x169 }, + {0x900ec ,0x6e }, + {0x900ed ,0x0 }, + {0x900ee ,0x68 }, + {0x900ef ,0x0 }, + {0x900f0 ,0x408 }, + {0x900f1 ,0x169 }, + {0x900f2 ,0x0 }, + {0x900f3 ,0x8310 }, + {0x900f4 ,0x168 }, + {0x900f5 ,0x0 }, + {0x900f6 ,0xa310 }, + {0x900f7 ,0x168 }, + {0x900f8 ,0x1ff8 }, + {0x900f9 ,0x85a8 }, + {0x900fa ,0x1e8 }, + {0x900fb ,0x68 }, + {0x900fc ,0x798 }, + {0x900fd ,0x16a }, + {0x900fe ,0x78 }, + {0x900ff ,0x7a0 }, + {0x90100 ,0x16a }, + {0x90101 ,0x68 }, + {0x90102 ,0x790 }, + {0x90103 ,0x16a }, + {0x90104 ,0x8 }, + {0x90105 ,0x8b10 }, + {0x90106 ,0x168 }, + {0x90107 ,0x8 }, + {0x90108 ,0xab10 }, + {0x90109 ,0x168 }, + {0x9010a ,0xa }, + {0x9010b ,0x408 }, + {0x9010c ,0x169 }, + {0x9010d ,0x58 }, + {0x9010e ,0x0 }, + {0x9010f ,0x68 }, + {0x90110 ,0x0 }, + {0x90111 ,0x408 }, + {0x90112 ,0x169 }, + {0x90113 ,0x0 }, + {0x90114 ,0x8b10 }, + {0x90115 ,0x168 }, + {0x90116 ,0x1 }, + {0x90117 ,0xab10 }, + {0x90118 ,0x168 }, + {0x90119 ,0x0 }, + {0x9011a ,0x1d8 }, + {0x9011b ,0x169 }, + {0x9011c ,0x80 }, + {0x9011d ,0x790 }, + {0x9011e ,0x16a }, + {0x9011f ,0x18 }, + {0x90120 ,0x7aa }, + {0x90121 ,0x6a }, + {0x90122 ,0xa }, + {0x90123 ,0x0 }, + {0x90124 ,0x1e9 }, + {0x90125 ,0x8 }, + {0x90126 ,0x8080 }, + {0x90127 ,0x108 }, + {0x90128 ,0xf }, + {0x90129 ,0x408 }, + {0x9012a ,0x169 }, + {0x9012b ,0xc }, + {0x9012c ,0x0 }, + {0x9012d ,0x68 }, + {0x9012e ,0x9 }, + {0x9012f ,0x0 }, + {0x90130 ,0x1a9 }, + {0x90131 ,0x0 }, + {0x90132 ,0x408 }, + {0x90133 ,0x169 }, + {0x90134 ,0x0 }, + {0x90135 ,0x8080 }, + {0x90136 ,0x108 }, + {0x90137 ,0x8 }, + {0x90138 ,0x7aa }, + {0x90139 ,0x6a }, + {0x9013a ,0x0 }, + {0x9013b ,0x8568 }, + {0x9013c ,0x108 }, + {0x9013d ,0xb7 }, + {0x9013e ,0x790 }, + {0x9013f ,0x16a }, + {0x90140 ,0x1f }, + {0x90141 ,0x0 }, + {0x90142 ,0x68 }, + {0x90143 ,0x8 }, + {0x90144 ,0x8558 }, + {0x90145 ,0x168 }, + {0x90146 ,0xf }, + {0x90147 ,0x408 }, + {0x90148 ,0x169 }, + {0x90149 ,0xd }, + {0x9014a ,0x0 }, + {0x9014b ,0x68 }, + {0x9014c ,0x0 }, + {0x9014d ,0x408 }, + {0x9014e ,0x169 }, + {0x9014f ,0x0 }, + {0x90150 ,0x8558 }, + {0x90151 ,0x168 }, + {0x90152 ,0x8 }, + {0x90153 ,0x3c8 }, + {0x90154 ,0x1a9 }, + {0x90155 ,0x3 }, + {0x90156 ,0x370 }, + {0x90157 ,0x129 }, + {0x90158 ,0x20 }, + {0x90159 ,0x2aa }, + {0x9015a ,0x9 }, + {0x9015b ,0x8 }, + {0x9015c ,0xe8 }, + {0x9015d ,0x109 }, + {0x9015e ,0x0 }, + {0x9015f ,0x8140 }, + {0x90160 ,0x10c }, + {0x90161 ,0x10 }, + {0x90162 ,0x8138 }, + {0x90163 ,0x104 }, + {0x90164 ,0x8 }, + {0x90165 ,0x448 }, + {0x90166 ,0x109 }, + {0x90167 ,0xf }, + {0x90168 ,0x7c0 }, + {0x90169 ,0x109 }, + {0x9016a ,0x0 }, + {0x9016b ,0xe8 }, + {0x9016c ,0x109 }, + {0x9016d ,0x47 }, + {0x9016e ,0x630 }, + {0x9016f ,0x109 }, + {0x90170 ,0x8 }, + {0x90171 ,0x618 }, + {0x90172 ,0x109 }, + {0x90173 ,0x8 }, + {0x90174 ,0xe0 }, + {0x90175 ,0x109 }, + {0x90176 ,0x0 }, + {0x90177 ,0x7c8 }, + {0x90178 ,0x109 }, + {0x90179 ,0x8 }, + {0x9017a ,0x8140 }, + {0x9017b ,0x10c }, + {0x9017c ,0x0 }, + {0x9017d ,0x478 }, + {0x9017e ,0x109 }, + {0x9017f ,0x0 }, + {0x90180 ,0x1 }, + {0x90181 ,0x8 }, + {0x90182 ,0x8 }, + {0x90183 ,0x4 }, + {0x90184 ,0x0 }, + {0x90006 ,0x8 }, + {0x90007 ,0x7c8 }, + {0x90008 ,0x109 }, + {0x90009 ,0x0 }, + {0x9000a ,0x400 }, + {0x9000b ,0x106 }, + {0xd00e7 ,0x400 }, + {0x90017 ,0x0 }, + {0x9001f ,0x2b }, + {0x90026 ,0x69 }, + {0x400d0 ,0x0 }, + {0x400d1 ,0x101 }, + {0x400d2 ,0x105 }, + {0x400d3 ,0x107 }, + {0x400d4 ,0x10f }, + {0x400d5 ,0x202 }, + {0x400d6 ,0x20a }, + {0x400d7 ,0x20b }, + {0x2003a ,0x2 }, + {0x200be ,0x3 }, + {0x2000b ,0x75 }, + {0x2000c ,0xe9 }, + {0x2000d ,0x91c }, + {0x2000e ,0x2c }, + {0x9000c ,0x0 }, + {0x9000d ,0x173 }, + {0x9000e ,0x60 }, + {0x9000f ,0x6110 }, + {0x90010 ,0x2152 }, + {0x90011 ,0xdfbd }, + {0x90012 ,0x2060 }, + {0x90013 ,0x6152 }, + {0x20010 ,0x5a }, + {0x20011 ,0x3 }, + {0x40080 ,0xe0 }, + {0x40081 ,0x12 }, + {0x40082 ,0xe0 }, + {0x40083 ,0x12 }, + {0x40084 ,0xe0 }, + {0x40085 ,0x12 }, + {0x400fd ,0xf }, + {0x400f1 ,0xe }, + {0x10011 ,0x1 }, + {0x10012 ,0x1 }, + {0x10013 ,0x180 }, + {0x10018 ,0x1 }, + {0x10002 ,0x6209 }, + {0x100b2 ,0x1 }, + {0x101b4 ,0x1 }, + {0x102b4 ,0x1 }, + {0x103b4 ,0x1 }, + {0x104b4 ,0x1 }, + {0x105b4 ,0x1 }, + {0x106b4 ,0x1 }, + {0x107b4 ,0x1 }, + {0x108b4 ,0x1 }, + {0x11011 ,0x1 }, + {0x11012 ,0x1 }, + {0x11013 ,0x180 }, + {0x11018 ,0x1 }, + {0x11002 ,0x6209 }, + {0x110b2 ,0x1 }, + {0x111b4 ,0x1 }, + {0x112b4 ,0x1 }, + {0x113b4 ,0x1 }, + {0x114b4 ,0x1 }, + {0x115b4 ,0x1 }, + {0x116b4 ,0x1 }, + {0x117b4 ,0x1 }, + {0x118b4 ,0x1 }, + {0x20089 ,0x1 }, + {0x20088 ,0x19 }, + {0xc0080 ,0x0 }, + {0xd0000 ,0x1 }, + +}; + +static struct dram_fsp_msg ddr_dram_fsp_msg[] = { + { +/* P0 3733mts 1D */ + .drate =3733 , + .fw_type =FW_1D_IMAGE , + .fsp_cfg = ddr_fsp0_cfg, + .fsp_cfg_num =ARRAY_SIZE (ddr_fsp0_cfg), + + }, + + { +/* P0 3733mts 2D */ + .drate =3733 , + .fw_type =FW_2D_IMAGE , + .fsp_cfg = ddr_fsp0_2d_cfg, + .fsp_cfg_num =ARRAY_SIZE (ddr_fsp0_2d_cfg), + }, + +}; + +/* ddr timing config params */ +struct dram_timing_info dram_timing = { + .ddrc_cfg = ddr_ddrc_cfg, + .ddrc_cfg_num =ARRAY_SIZE (ddr_ddrc_cfg), + .ddrphy_cfg = ddr_ddrphy_cfg, + .ddrphy_cfg_num =ARRAY_SIZE (ddr_ddrphy_cfg), + .fsp_msg = ddr_dram_fsp_msg, + .fsp_msg_num =ARRAY_SIZE (ddr_dram_fsp_msg), + .ddrphy_trained_csr = ddr_ddrphy_trained_csr, + .ddrphy_trained_csr_num =ARRAY_SIZE (ddr_ddrphy_trained_csr), + .ddrphy_pie = ddr_phy_pie, + .ddrphy_pie_num =ARRAY_SIZE (ddr_phy_pie), + .fsp_table = {3733 , }, + .fsp_cfg = ddr_dram_fsp_cfg, + .fsp_cfg_num =ARRAY_SIZE (ddr_dram_fsp_cfg), +};board/phytec/phycore_imx93/phycore_imx93.c new file +13
-0@@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 NXP +* Copyright (C) 2023 PHYTEC Messtechnik GmbH +* Christoph Stoidner <[email protected]> +* Copyright (C) 2024 Mathieu Othacehe <[email protected]> +*/ + +#include <env.h> +#include <init.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/global_data.h>
board/phytec/phycore_imx93/phycore_imx93.c line 23
Quoted 10 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +10
-0+#include <asm/arch-imx9/ccm_regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch-imx9/imx93_pins.h> +#include <asm/arch/clock.h> +#include <power/pmic.h> +#include <dm/device.h> +#include <dm/uclass.h> +#include <usb.h> +#include <dwc3-uboot.h> +#include <asm/gpio.h>
Can we get ride of some of the unused includes here?
board/phytec/phycore_imx93/phycore_imx93.c line 36
Quoted 13 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +13
-0+ +DECLARE_GLOBAL_DATA_PTR ; + +#define UART_PAD_CTRL (PAD_CTL_DSE(6) | PAD_CTL_FSEL2) + +static const iomux_v3_cfg_t uart_pads[] = { +MX93_PAD_UART1_RXD__LPUART1_RX |MUX_PAD_CTRL (UART_PAD_CTRL ), +MX93_PAD_UART1_TXD__LPUART1_TX |MUX_PAD_CTRL (UART_PAD_CTRL ), +}; + +int board_early_init_f (void ) +{ +imx_iomux_v3_setup_multiple_pads (uart_pads,ARRAY_SIZE (uart_pads));
I don't think this is necessary?
You are using CONFIG_DM_SERIAL.
You may also remove above defines and board_early_init_f() all-together further simplifying code.
Disable also CONFIG_BOARD_EARLY_INIT_F=y in that case.
board/phytec/phycore_imx93/phycore_imx93.c line 44
Quoted 8 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +8
-0+ +return 0 ; +} + +int board_phy_config (struct phy_device *phydev) +{ +if (phydev->drv->config) + phydev->drv->config (phydev);
No need to override default board_phy_config if it is the same.
Please remove board_phy_config.
Quoted 4 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +4
-0+ +return 0 ; +} +
board/phytec/phycore_imx93/phycore_imx93.c line 58
Quoted 10 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +10
-0+int board_init (void ) +{ +return 0 ; +} + +int board_late_init (void ) +{ +env_set ("sec_boot" ,"no" ); +if (IS_ENABLED (CONFIG_AHAB_BOOT )) +env_set ("sec_boot" ,"yes" );
To support eMMC here we should add:
switch (get_boot_device()) {
case SD2_BOOT:
env_set_ulong("mmcdev", 1);
break;
case MMC1_BOOT:
env_set_ulong("mmcdev", 0);
break;
default:
break;
}to dynamically set appropriate mmcdev. Otherwise you would boot from eMMC and then load the rest of binaries from SD-card.
Quoted 94 lines
board/phytec/phycore_imx93/phycore_imx93.c new file +3
-0+ +return 0 ; +}board/phytec/phycore_imx93/phycore_imx93.env new file +85
-0@@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +image=Image +console=ttyLP0 +fdt_addr=0x83000000 +fdto_addr=0x830c0000 +bootenv_addr=0x83500000 +fdt_file=CONFIG_DEFAULT_FDT_FILE +ipaddr=192.168.3.11 +serverip=192.168.3.10 +netmask=255.255.255.0 +ip_dyn=no +bootenv=bootenv.txt +mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv} +mmcdev=__stringify(CONFIG_SYS_MMC_ENV_DEV) +mmcpart=1 +mmcroot=2 +mmcautodetect=yes +mmcargs=setenv bootargs console=${console},${baudrate} earlycon + root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file} +mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay} +mmc_apply_overlays= + fdt address ${fdt_addr}; + for overlay in ${overlays}; + do; + if run mmc_load_overlay; then + fdt resize ${filesize}; + fdt apply ${fdto_addr}; + fi; + done; +mmcboot= + echo Booting from mmc ...; + if run mmc_load_bootenv; then + env import -t ${bootenv_addr} ${filesize}; + fi; + run mmcargs; + if run loadfdt; then + run mmc_apply_overlays; + booti ${loadaddr} - ${fdt_addr}; + else + echo WARN: Cannot load the DT; + fi; +nfsroot=/nfs +netargs=setenv bootargs console=${console},${baudrate} earlycon + root=/dev/nfs ip=${nfsip} nfsroot=${serverip}:${nfsroot},v3,tcp +net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv} +net_load_overlay=${get_cmd} ${fdto_addr} ${overlay} +net_apply_overlays= + fdt address ${fdt_addr}; + for overlay in ${overlays}; + do; + if run net_load_overlay; then + fdt resize ${filesize}; + fdt apply ${fdto_addr}; + fi; + done; +netboot= + echo Booting from net ...; + if test ${ip_dyn} = yes; then + setenv nfsip dhcp; + setenv get_cmd dhcp; + else + setenv nfsip ${ipaddr}:${serverip}::${netmask}::eth0:on; + setenv get_cmd tftp; + fi; + if run net_load_bootenv; then + env import -t ${bootenv_addr} ${filesize}; + fi; + run netargs; + ${get_cmd} ${loadaddr} ${image}; + if ${get_cmd} ${fdt_addr} ${fdt_file}; then + run net_apply_overlays; + booti ${loadaddr} - ${fdt_addr}; + else + echo WARN: Cannot load the DT; + fi; +bsp_bootcmd=echo Running BSP bootcmd ...;> + mmc dev ${mmcdev}; if mmc rescan; then + if run loadbootscript; then + run bootscript; + else + if test ${sec_boot} = yes; then + if run loadcntr; then + run mmcboot;
board/phytec/phycore_imx93/phycore_imx93.env line 95
Quoted 10 lines
board/phytec/phycore_imx93/phycore_imx93.env new file +10
-0+ else run netboot; + fi; + else + if run loadimage; then + run mmcboot; + else run netboot; + fi; + fi; + fi; + fi;
Please use tabs here instead of spaces here?
IMHO I would disable distroboot and sync with downstream. From my tests it also doesn't work so +1 to remove bsp_bootcmd here.
Quoted 33 lines
board/phytec/phycore_imx93/spl.c new file +27
-0@@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright 2022 NXP +* Copyright (C) 2023 PHYTEC Messtechnik GmbH +* Christoph Stoidner <[email protected]> +* Copyright (C) 2024 Mathieu Othacehe <[email protected]> +*/ + +#include <command.h> +#include <cpu_func.h> +#include <hang.h> +#include <image.h> +#include <init.h> +#include <log.h> +#include <spl.h> +#include <asm/global_data.h> +#include <asm/io.h> +#include <asm/arch/imx93_pins.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-imx/boot_mode.h> +#include <asm/mach-imx/mxc_i2c.h> +#include <asm/arch-mx7ulp/gpio.h> +#include <asm/sections.h> +#include <asm/mach-imx/syscounter.h> +#include <asm/mach-imx/ele_api.h> +#include <dm/uclass.h>
board/phytec/phycore_imx93/spl.c line 37
Quoted 10 lines
board/phytec/phycore_imx93/spl.c new file +10
-0+#include <dm/device.h> +#include <dm/uclass-internal.h> +#include <dm/device-internal.h> +#include <linux/delay.h> +#include <asm/arch/clock.h> +#include <asm/arch/ccm_regs.h> +#include <asm/arch/ddr.h> +#include <power/pmic.h> +#include <power/pca9450.h> +#include <asm/arch/trdc.h>
Can we get rid of unused includes here?
Quoted 13 lines
board/phytec/phycore_imx93/spl.c new file +13
-0+ +DECLARE_GLOBAL_DATA_PTR ; + +/* +* Will be part of drivers/power/regulator/pca9450.c +* when pca9451a support is added. +*/ +#define PCA9450_REG_PWRCTRL_TOFF_DEB BIT(5) + +int spl_board_boot_device (enum boot_device boot_dev_spl) +{ +if (IS_ENABLED (CONFIG_SPL_BOOTROM_SUPPORT )) +return BOOT_DEVICE_BOOTROM ;
board/phytec/phycore_imx93/spl.c line 60
Quoted 10 lines
board/phytec/phycore_imx93/spl.c new file +10
-0+ +switch (boot_dev_spl) { +case SD1_BOOT : +case MMC1_BOOT : +return BOOT_DEVICE_MMC1 ; +case SD2_BOOT : +case MMC2_BOOT : +return BOOT_DEVICE_MMC2 ; +default : +return BOOT_DEVICE_NONE ;
Can we remove switch-case constructs and rely on BOOTROM here:
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
return BOOT_DEVICE_BOOTROM;
}Quoted 18 lines
board/phytec/phycore_imx93/spl.c new file +18
-0+ } +} + +void spl_board_init (void ) +{ +puts ("Normal Boot\n" ); +} + +void spl_dram_init (void ) +{ +ddr_init (&dram_timing); +} + +int power_init_board (void ) +{ +struct udevice *dev; +int ret; +unsigned int val =0 ;
board/phytec/phycore_imx93/spl.c line 88
Quoted 10 lines
board/phytec/phycore_imx93/spl.c new file +10
-0+ +if (!IS_ENABLED (CONFIG_DM_PMIC_PCA9450 )) +return 0 ; + + ret =pmic_get ("pmic@25" , &dev); +if (ret == -ENODEV ) { +puts ("No pca9450@25\n" ); +return 0 ; + } +if (ret !=0 )
Insert a new-line above this if statement.
board/phytec/phycore_imx93/spl.c
Quoted 13 lines
board/phytec/phycore_imx93/spl.c new file +13
-0+return ret; + +/* BUCKxOUT_DVS0/1 control BUCK123 output */ +pmic_reg_write (dev,PCA9450_BUCK123_DVS ,0x29 ); + +/* enable DVS control through PMIC_STBY_REQ */ +pmic_reg_write (dev,PCA9450_BUCK1CTRL ,0x59 ); + + ret =pmic_reg_read (dev,PCA9450_PWR_CTRL ); +if (ret <0 ) +return ret; + + val = ret
Remove new-line above this statement and add it bellow.
configs/imx93-phyboard-segin_defconfig
Quoted 87 lines
board/phytec/phycore_imx93/spl.c new file +81
-0+if (IS_ENABLED (CONFIG_IMX9_LOW_DRIVE_MODE )) { +/* 0.8v for Low drive mode +*/ +if (val &PCA9450_REG_PWRCTRL_TOFF_DEB ) { +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS0 ,0x0c ); +pmic_reg_write (dev,PCA9450_BUCK3OUT_DVS0 ,0x0c ); + }else { +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS0 ,0x10 ); +pmic_reg_write (dev,PCA9450_BUCK3OUT_DVS0 ,0x10 ); + } + }else { +/* 0.9v for Over drive mode +*/ +if (val &PCA9450_REG_PWRCTRL_TOFF_DEB ) { +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS0 ,0x14 ); +pmic_reg_write (dev,PCA9450_BUCK3OUT_DVS0 ,0x14 ); + }else { +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS0 ,0x18 ); +pmic_reg_write (dev,PCA9450_BUCK3OUT_DVS0 ,0x18 ); + } + } + +/* set standby voltage to 0.65v */ +if (val &PCA9450_REG_PWRCTRL_TOFF_DEB ) +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS1 ,0x0 ); +else +pmic_reg_write (dev,PCA9450_BUCK1OUT_DVS1 ,0x4 ); + +/* I2C_LT_EN*/ +pmic_reg_write (dev,0xa ,0x3 ); + +return 0 ; +} + +extern int imx9_probe_mu (void *ctx,struct event *event); +void board_init_f (ulong dummy) +{ +int ret; + +/* Clear the BSS. */ +memset (__bss_start,0 , __bss_end - __bss_start); + +timer_init (); + +arch_cpu_init (); + +board_early_init_f (); + +spl_early_init (); + +preloader_console_init (); + + ret =imx9_probe_mu (NULL ,NULL ); +if (ret) { +printf ("Fail to init ELE API\n" ); + }else { +printf ("SOC: 0x%x\n" , gd->arch.soc_rev); +printf ("LC: 0x%x\n" , gd->arch.lifecycle); + } + +power_init_board (); + +if (!IS_ENABLED (CONFIG_IMX9_LOW_DRIVE_MODE )) +set_arm_core_max_clk (); + +/* Init power of mix */ +soc_power_init (); + +/* Setup TRDC for DDR access */ +trdc_init (); + +/* DDR initialization */ +spl_dram_init (); + +/* Put M33 into CPUWAIT for following kick */ + ret =m33_prepare (); +if (!ret) +printf ("M33 prepare ok\n" ); + +board_init_r (NULL ,0 ); +}configs/imx93-phyboard-segin_defconfig new file +0
-0@@ -0,0 +1,147 @@
Hummm lots of unused stuff is enabled.
I will drop a comment on obvious ones.
Maybe run savedefconfig to get rid of some stuff automatically?
configs/imx93-phyboard-segin_defconfig line 9
Quoted 9 lines
configs/imx93-phyboard-segin_defconfig new file +9
-0+CONFIG_ARM=y +CONFIG_ARCH_IMX9=y +CONFIG_TEXT_BASE=0x80200000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x18000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ENV_SIZE=0x4000
Please set size to 0x10000 like in the downstream.
configs/imx93-phyboard-segin_defconfig line 10
Quoted 1 line
configs/imx93-phyboard-segin_defconfig new file +1
-0+CONFIG_ENV_OFFSET=0x700000
Can we also enable the redundant env at offset:
CONFIG_ENV_OFFSET_REDUND=0x720000
like we did in downstream?
I would like it to be in sync.
Quoted 12 lines
configs/imx93-phyboard-segin_defconfig new file +12
-0+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg" +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="imx93-phyboard-segin" +CONFIG_SPL_TEXT_BASE=0x2049A000 +CONFIG_TARGET_PHYCORE_IMX93=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y +CONFIG_SPL_STACK=0x20519dd0 +CONFIG_SPL=y +CONFIG_CMD_DEKBLOB=y +CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
configs/imx93-phyboard-segin_defconfig line 32
Quoted 10 lines
configs/imx93-phyboard-segin_defconfig new file +10
-0+CONFIG_SPL_LOAD_IMX_CONTAINER=y +CONFIG_SYS_LOAD_ADDR=0x80400000 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x90000000 +CONFIG_REMAKE_ELF=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SYS_MONITOR_LEN=524288 +CONFIG_DISTRO_DEFAULTS=y +CONFIG_BOOTDELAY=1
Remove BOOTDELAY=1 will use default.
configs/imx93-phyboard-segin_defconfig line 34
Quoted 2 lines
configs/imx93-phyboard-segin_defconfig new file +2
-0+CONFIG_OF_SYSTEM_SETUP=y +CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd"
IMHO not sure if we want to go with distro_bootcmd here...
If you decide to disable it, please go with downstream CONFIG_BOOTCOMMAND here:
"mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
configs/imx93-phyboard-segin_defconfig line 35
Quoted 1 line
configs/imx93-phyboard-segin_defconfig new file +1
-0+CONFIG_DEFAULT_FDT_FILE="imx93-phyboard-segin.dtb"
PHYTEC uses "oftree" for CONFIG_DEFAULT_FDT_FILE and then symlinks correct dtb in yocto. Please rename.
configs/imx93-phyboard-segin_defconfig line 36
Quoted 1 line
configs/imx93-phyboard-segin_defconfig new file +1
-0+CONFIG_BOARD_EARLY_INIT_F=y
Like said above, you can remove BOARD_EARLY_INIT_F if it becomes a dummy function.
Quoted 26 lines
configs/imx93-phyboard-segin_defconfig new file +26
-0+CONFIG_BOARD_LATE_INIT=y +CONFIG_SPL_MAX_SIZE=0x26000 +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y +CONFIG_SPL_BSS_START_ADDR=0x2051a000 +CONFIG_SPL_BSS_MAX_SIZE=0x2000 +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_BOOTROM_SUPPORT=y +CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg" +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set +CONFIG_SYS_SPL_MALLOC=y +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000 +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 +CONFIG_SPL_I2C=y +CONFIG_SPL_POWER=y +CONFIG_SPL_WATCHDOG=y +CONFIG_SYS_PROMPT="u-boot=> " +CONFIG_SYS_MAXARGS=64 +CONFIG_SYS_CBSIZE=2048 +CONFIG_SYS_PBSIZE=2074 +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CRC32_VERIFY=y +CONFIG_CMD_MEMTEST=y
configs/imx93-phyboard-segin_defconfig line 72
Quoted 10 lines
configs/imx93-phyboard-segin_defconfig new file +10
-0+CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_POWEROFF=y +CONFIG_CMD_READ=y +CONFIG_CMD_WDT=y +CONFIG_BOOTP_PREFER_SERVERIP=y
Not sure we want to have CONFIG_BOOTP_PREFER_SERVERIP enabled by default. See ip_dyn variable in phycore_imx93.env.
configs/imx93-phyboard-segin_defconfig line 74
Quoted 2 lines
configs/imx93-phyboard-segin_defconfig new file +2
-0+CONFIG_CMD_SNTP=y +CONFIG_CMD_BMP=y
Disable CMD_BMP as FB is not supported in bootloader.
Quoted 4 lines
configs/imx93-phyboard-segin_defconfig new file +4
-0+CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_RTC=y +CONFIG_CMD_TIME=y
configs/imx93-phyboard-segin_defconfig line 88
Quoted 10 lines
configs/imx93-phyboard-segin_defconfig new file +10
-0+CONFIG_CMD_GETTIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_HASH=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_ENV_SOURCE_FILE="phycore_imx93" +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_NOWHERE=y
What about adding CONFIG_ENV_IS_IN_MMC=y here?
Downstream u-boot stores env in MMC.
Quoted 4 lines
configs/imx93-phyboard-segin_defconfig new file +4
-0+CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=1 +CONFIG_USE_ETHPRIME=y +CONFIG_ETHPRIME="eth1"
configs/imx93-phyboard-segin_defconfig line 102
Quoted 10 lines
configs/imx93-phyboard-segin_defconfig new file +10
-0+CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SYSCON=y +CONFIG_SPL_CLK_IMX93=y +CONFIG_CLK_IMX93=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_GPIO_HOG=y +CONFIG_IMX_RGPIO2P=y +CONFIG_DM_PCA953X=y
No PCA953x on phyCORE-i.MX93, disable.
configs/imx93-phyboard-segin_defconfig line 111
Quoted 9 lines
configs/imx93-phyboard-segin_defconfig new file +9
-0+CONFIG_DM_I2C=y +CONFIG_SYS_I2C_IMX_LPI2C=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_HS400_ES_SUPPORT=y +CONFIG_MMC_HS400_SUPPORT=y +CONFIG_FSL_USDHC=y +CONFIG_DM_SPI_FLASH=y
No SPI flash on phyCORE-i.MX93, you can disable it.
configs/imx93-phyboard-segin_defconfig line 114
Quoted 3 lines
configs/imx93-phyboard-segin_defconfig new file +3
-0+CONFIG_SF_DEFAULT_SPEED=40000000 +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_PHY_REALTEK=y
No realtek PHY, disable it.
configs/imx93-phyboard-segin_defconfig line 116
Quoted 2 lines
configs/imx93-phyboard-segin_defconfig new file +2
-0+CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y
No GIGE PHY, disable it.
Can you enable CONFIG_PHY_TI_GENERIC though since we have TI eth phy?
configs/imx93-phyboard-segin_defconfig line 122
Quoted 6 lines
configs/imx93-phyboard-segin_defconfig new file +6
-0+CONFIG_DWC_ETH_QOS=y +CONFIG_DWC_ETH_QOS_IMX=y +CONFIG_FEC_MXC=y +CONFIG_MII=y +CONFIG_MIPI_DPHY_HELPERS=y +CONFIG_PHY_IMX93_MIPI_DPHY=y
Disable MIPI stuff
Quoted 4 lines
configs/imx93-phyboard-segin_defconfig new file +4
-0+CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_PINCTRL_IMX93=y +CONFIG_POWER_DOMAIN=y
configs/imx93-phyboard-segin_defconfig line 136
Quoted 10 lines
configs/imx93-phyboard-segin_defconfig new file +10
-0+CONFIG_IMX93_BLK_CTRL=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PCA9450=y +CONFIG_SPL_DM_PMIC_PCA9450=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PCA9450=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_RTC=y +CONFIG_RTC_PCF2131=y
No such RTC on phyCORE-i.MX93, disable it.
Quoted 17 lines
configs/imx93-phyboard-segin_defconfig new file +11
-0+CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y +CONFIG_DM_THERMAL=y +CONFIG_IMX_TMU=y +CONFIG_ULP_WATCHDOG=y +CONFIG_WDT=y +CONFIG_LZO=y +CONFIG_BZIP2=ydoc/board/phytec/imx93-phyboard-segin.rst new file +0
-0
doc/board/phytec/imx93-phyboard-segin.rst line 4
Quoted 4 lines
doc/board/phytec/imx93-phyboard-segin.rst new file +4
-0@@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +phyCORE-i.MX 93 on a phyBOARD-Segin +===================================
Replace title with:
phyBOARD-Segin-i.MX93
doc/board/phytec/imx93-phyboard-segin.rst line 6
Quoted 2 lines
doc/board/phytec/imx93-phyboard-segin.rst new file +2
-0+ +U-Boot for the phyCORE-i.MX 93 on a phyBOARD-Segin.
same here, use:
U-Boot for the phyBOARD-Segin-i.MX93.
Quoted 31 lines
doc/board/phytec/imx93-phyboard-segin.rst new file +31
-0+ +Quick Start +----------- + +- Get and Build the ARM Trusted firmware +- Get the DDR firmware +- Get ahab-container.img +- Build U-Boot + +Get and Build the ARM Trusted firmware +-------------------------------------- + +Note: srctree is U-Boot source directory +Get ATF from: https://github.com/nxp-imx/imx-atf/ +branch: lf_v2.8 + +.. code-block:: bash + + $ unset LDFLAGS + $ make PLAT=imx93 bl31 + $ cp build/imx93/release/bl31.bin $(srctree) + +Get the DDR firmware +-------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin + $ chmod +x firmware-imx-8.21.bin + $ ./firmware-imx-8.21.bin + $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
doc/board/phytec/imx93-phyboard-segin.rst line 47
Quoted 10 lines
doc/board/phytec/imx93-phyboard-segin.rst new file +10
-0+ +Get ahab-container.img +--------------------------------------- + +.. code-block:: bash + + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin + $ chmod +x firmware-sentinel-0.10.bin + $ ./firmware-sentinel-0.10.bin + $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
We have to start thinking about i.MX93 A1 SoC REVs here...
But for now, leave as is, we can fix it later for all the in-tree i.MX93 boards.
Quoted 31 lines
doc/board/phytec/imx93-phyboard-segin.rst new file +14
-0+ +Build U-Boot +------------ + +.. code-block:: bash + + $ make imx93-phyboard-segin_defconfig + $ make + +Burn the flash.bin to MicroSD card offset 32KB: + +.. code-block:: bash + + $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notruncdoc/board/phytec/index.rst +1
-0@@ -7,5 +7,6 @@ PHYTEC :maxdepth: 2 imx8mm-phygate-tauri-l + imx93-phyboard-segin phycore-imx8mm phycore-imx8mpinclude/configs/phycore_imx93.h new file +0
-0
include/configs/phycore_imx93.h line 9
Quoted 9 lines
include/configs/phycore_imx93.h new file +9
-0@@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright 2022 NXP +* Copyright (C) 2023 PHYTEC Messtechnik GmbH +* Christoph Stoidner <[email protected]> +*/ + +#ifndef __IMX93_PHYBOARD_SEGIN_H +#define __IMX93_PHYBOARD_SEGIN_H
Please rename this to __IMX93_PHYCORE_H
include/configs/phycore_imx93.h line 12
Quoted 3 lines
include/configs/phycore_imx93.h new file +3
-0+ +#include <linux/sizes.h> +#include <linux/stringify.h>
Drop stringify.h here, not required as we are using .env file.
include/configs/phycore_imx93.h line 17
Quoted 5 lines
include/configs/phycore_imx93.h new file +5
-0+#include <asm/arch/imx-regs.h> + +#define CFG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +
If you decide to drop distroboot, please drop all distro_bootcmd related stuff from here.
Quoted 6 lines
include/configs/phycore_imx93.h new file +6
-0+#define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) + +#include <config_distro_bootcmd.h>> + +/* Initial environment variables */
include/configs/phycore_imx93.h line 34
Quoted 10 lines
include/configs/phycore_imx93.h new file +10
-0+#define CFG_EXTRA_ENV_SETTINGS BOOTENV + +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 + +#define CFG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE 0x80000000 + +#define CFG_SYS_FSL_USDHC_NUM 2
Can we drop this define if not used?
include/configs/phycore_imx93.h line 41
Quoted 7 lines
include/configs/phycore_imx93.h new file +7
-0+ +/* Using ULP WDOG for reset */ +#define WDOG_BASE_ADDR WDG3_BASE_ADDR + +#if defined(CONFIG_CMD_NET ) +#define PHY_ANEG_TIMEOUT 20000 +#endif
Please, drop this PHY_ANEG_TIMEOUT stuff, it is not required.
include/configs/phycore_imx93.h line 45
Quoted 4 lines
include/configs/phycore_imx93.h new file +4
-0+ +#ifdef CONFIG_IMX_MATTER_TRUSTY +#define NS_ARCH_ARM64 1 +#endif
Drop CONFIG_IMX_MATTER_TRUSTY, this is only available in u-boot-imx?
include/configs/phycore_imx93.h line 46
Quoted 2 lines
include/configs/phycore_imx93.h new file +2
-0+ +#endif
BR,
Primoz
Signature · 9 lines
Primoz Fiser | phone: +386-41-540-545 <tel:+386-41-390-545> | ---------------------------------------------------------| Norik systems d.o.o. | https://www.norik.com <https://www.norik.com> | Your embedded software partner | email: [email protected] <mailto:[email protected]> | Slovenia, EU | phone: +386-41-540-545 <tel:+386-41-540-545> |
Hello,
Thanks for having a look!
Quoted 6 lines
Here are my findings:
- FEC ethernet doesn't work
- distroboot doesn't workDid you expirience the same?
I have not tested Ethernet ports on u-boot yet. I removed distroboot support as you proposed later in the review.
Note that my evaluation board has a hardware issue on the eMMC module. I am testing this patch my flashing the bootloader on the SD card using the commands in the proposed documentation, and booting on the SD card.
Quoted 1 line
Can you rework you commit msg + title please?
Done.
Quoted 1 line
Can you rename to match other?
Sure.
Quoted 8 lines
Can you add:
&wdog3 { bootph-all; bootph-pre-ram; };here to also enable WDT in SPL, please.
OK.
Quoted 3 lines
I don't think this is necessary?
You are using
CONFIG_DM_SERIAL.
It is not necessary indeed.
Quoted 1 line
IMHO I would disable distroboot and sync with downstream.
Done.
I synced the configuration and environment files to be closer to the downstream versions.
I will send a v3 soon.
Thanks,
Mathieu