Skip to contentSkip to conversation

FAILED: patch "[PATCH] ARM: dts: qcom: sdx55: fix USB SS wakeup" failed to apply to 5.15-stable tree

PATCH [email protected] 1 participant 1 message Jan 26, 2024

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 710dd03464e4ab5b3d329768388b165d61958577
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024012644-margarine-oval-e77b@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..

Possible dependencies:

710dd03464e4 ("ARM: dts: qcom: sdx55: fix USB SS wakeup") de95f139394a ("ARM: dts: qcom: sdx55: fix USB DP/DM HS PHY interrupts") d0ec3c4c11c3 ("ARM: dts: qcom: sdx55: fix USB wakeup interrupt types")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 710dd03464e4ab5b3d329768388b165d61958577 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Wed, 13 Dec 2023 18:31:31 +0100
Subject: [PATCH] ARM: dts: qcom: sdx55: fix USB SS wakeup

The USB SS PHY interrupt needs to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states.

Fixes fea4b41022f3 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc Manivannan Sadhasivam <[email protected]>
arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +1 -1
index 5347519f8357..e233233c74ce 100644
@@ -581,7 +581,7 @@ usb: usb@a6f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 51 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",