Skip to contentSkip to conversation

hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'

PATCH Applied Konstantin Aladyshev 2 participants 2 messages Jan 27, 2024 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon: (pmbus/mp2975) Correct comment inside 'mp2975_read_byte_data'

The current driver code no longer perfrom internal conversion from VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL. Correct the comment message inside the 'mp2975_read_byte_data' function to comply with the driver logic.

---
 drivers/hwmon/pmbus/mp2975.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/hwmon/pmbus/mp2975.c +3 -4
index 5bbfdacb61a7..e5fa10b3b8bc 100644
@@ -131,10 +131,9 @@ static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg)
 	switch (reg) {
 	case PMBUS_VOUT_MODE:
 		/*
-		 * Enforce VOUT direct format, since device allows to set the
-		 * different formats for the different rails. Conversion from
-		 * VID to direct provided by driver internally, in case it is
-		 * necessary.
+		 * Report direct format as configured by MFR_DC_LOOP_CTRL.
+		 * Unlike on MP2971/MP2973 the reported VOUT_MODE isn't automatically
+		 * internally updated, but always reads as PB_VOUT_MODE_VID.
 		 */
 		return PB_VOUT_MODE_DIRECT;
 	default:
Signature · 1 line
2.34.1
maintainer Applied
#1 lore raw
Quoted 6 lines · Konstantin Aladyshev

The current driver code no longer perfrom internal conversion from VID to direct. Instead it configures READ_VOUT using MFR_DC_LOOP_CTRL. Correct the comment message inside the 'mp2975_read_byte_data' function to comply with the driver logic.

Applied.

Thanks,
Guenter