Skip to contentSkip to conversation

scsi: target: core: Add TMF to tmr_list handling

PATCH New Sasha Levin 1 participant 2 messages Jan 29, 2024

Subsystems (4)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/2 scsi: target: core: Add TMF to tmr_list handling

From: Dmitry Bogdanov <[email protected]>

[ Upstream commit 83ab68168a3d990d5ff39ab030ad5754cbbccb25 ]

An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core.

Unable to locate ITT: 0x05000000 on CID: 0
Unable to locate RefTaskTag: 0x05000000 on CID: 0.
wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop
...

 INFO: task kworker/0:2:49 blocked for more than 491 seconds.
 task:kworker/0:2     state:D stack:    0 pid:   49 ppid:     2 flags:0x00000800
 Workqueue: events target_tmr_work [target_core_mod]
Call Trace:
 __switch_to+0x2c4/0x470
 _schedule+0x314/0x1730
 schedule+0x64/0x130
 schedule_timeout+0x168/0x430
 wait_for_completion+0x140/0x270
 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod]
 core_tmr_lun_reset+0x30/0xa0 [target_core_mod]
 target_tmr_work+0xc8/0x1b0 [target_core_mod]
 process_one_work+0x2d4/0x5d0
 worker_thread+0x78/0x6c0

To fix this, only add abort to tmr_list if it will be handled by target core.

---
 drivers/target/target_core_device.c    | 5 -----
 drivers/target/target_core_transport.c | 4 ++++
 2 files changed, 4 insertions(+), 5 deletions(-)
drivers/target/target_core_device.c +0 -5
index a23dcbe79e14..3ed43a5f1fd3 100644
@@ -164,7 +164,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u64 unpacked_lun)
 	struct se_session *se_sess = se_cmd->se_sess;
 	struct se_node_acl *nacl = se_sess->se_node_acl;
 	struct se_tmr_req *se_tmr = se_cmd->se_tmr_req;
-	unsigned long flags;
 
 	rcu_read_lock();
 	deve = target_nacl_find_deve(nacl, unpacked_lun);
@@ -195,10 +194,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u64 unpacked_lun)
 	se_cmd->se_dev = rcu_dereference_raw(se_lun->lun_se_dev);
 	se_tmr->tmr_dev = rcu_dereference_raw(se_lun->lun_se_dev);
 
-	spin_lock_irqsave(&se_tmr->tmr_dev->se_tmr_lock, flags);
-	list_add_tail(&se_tmr->tmr_list, &se_tmr->tmr_dev->dev_tmr_list);
-	spin_unlock_irqrestore(&se_tmr->tmr_dev->se_tmr_lock, flags);
-
 	return 0;
 }
 EXPORT_SYMBOL(transport_lookup_tmr_lun);
drivers/target/target_core_transport.c +4 -0
index 64481a3a34d4..f8ba730fa1cf 100644
@@ -3463,6 +3463,10 @@ int transport_generic_handle_tmr(
 	unsigned long flags;
 	bool aborted = false;
 
+	spin_lock_irqsave(&cmd->se_dev->se_tmr_lock, flags);
+	list_add_tail(&cmd->se_tmr_req->tmr_list, &cmd->se_dev->dev_tmr_list);
+	spin_unlock_irqrestore(&cmd->se_dev->se_tmr_lock, flags);
+
 	spin_lock_irqsave(&cmd->t_state_lock, flags);
 	if (cmd->transport_state & CMD_T_ABORTED) {
 		aborted = true;
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/2 dmaengine: shdma: increase size of 'dev_id'

From: Vinod Koul <[email protected]>

[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]

We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'dev_id'

drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~
In function ‘sh_dmae_chan_probe’,
inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]

  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
  540 |                 snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  541 |                          "sh-dmae%d.%d", pdev->id, id);
      |                          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
---
 drivers/dma/sh/shdma.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/sh/shdma.h +1 -1
index 2c0a969adc9f..35987a35a848 100644
@@ -29,7 +29,7 @@ struct sh_dmae_chan {
 	const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
 	int xmit_shift;			/* log_2(bytes_per_xfer) */
 	void __iomem *base;
-	char dev_id[16];		/* unique name per DMAC of channel */
+	char dev_id[32];		/* unique name per DMAC of channel */
 	int pm_error;
 	dma_addr_t slave_addr;
 };
Signature · 1 line
2.43.0