arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
From: Chris Morgan <[email protected]>
Add the Goodix GT927 touchscreen to the Anbernic RG-ARC D.
Signed-off-by Chris Morgan <[email protected]>
Tested-by Trooper_Max <[email protected]>
--- .../dts/rockchip/rk3566-anbernic-rg-arc-d.dts | 26 ++++++++++++++++--- 1 file changed, 22 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg-arc-d.dts +22 -4
@@ -19,14 +19,32 @@ aliases { }; }; -/* - * Unknown Goodix touchscreen at i2c2 0x14. Needs testing before it's - * enabled. - */ &i2c2 { pinctrl-0 = <&i2c2m1_xfer>; pinctrl-names = "default"; status = "okay"; + + gt927@14 { + compatible = "goodix,gt927"; + reg = <0x14>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB1 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&touch_int>; + pinctrl-names = "default"; + reset-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>; + touchscreen-inverted-y; + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; + }; +}; + +&pinctrl { + touchscreen { + touch_int: touch_int { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &sdhci {
Signature · 1 line
2.34.1
Quoted 5 lines · Chris Morgan
From: Chris Morgan <[email protected]>
Add the Goodix GT927 touchscreen to the Anbernic RG-ARC D.
Applied, thanks!
[1/1] arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D
commit: 2ec7d42918f0170331cb4206d36d10837c815549
Best regards,
Signature · 6 lines
Heiko Stuebner <[email protected]> _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip