gpio: set device type for GPIO chips
PATCH v2 1/1 gpio: set device type for GPIO chips
From: Bartosz Golaszewski <[email protected]>
It's useful to have the device type information for those sub-devices that are actually GPIO chips registered with GPIOLIB. While at it: use the device type struct to setup the release callback which is the preferred way to use the device API.
---
v1-> v2:
- make struct device_type constant
drivers/gpio/gpiolib.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpio/gpiolib.c +9 -4
@@ -663,6 +663,11 @@ static void gpiodev_release(struct device *dev)kfree (gdev); } +static const struct device_type gpio_dev_type = { + .name ="gpio_chip" , + .release = gpiodev_release, +}; +#ifdef CONFIG_GPIO_CDEV #define gcdev_register (gdev, devt) gpiolib_cdev_register((gdev), (devt))#define gcdev_unregister (gdev) gpiolib_cdev_unregister((gdev))
@@ -680,6 +685,8 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)struct fwnode_handle *fwnode =dev_fwnode (&gdev->dev);int ret; +device_initialize (&gdev->dev); +/* * If fwnode doesn't belong to another device, it's safe to clear its * initialized flag.
@@ -691,9 +698,6 @@ static int gpiochip_setup_dev(struct gpio_device *gdev)if (ret)return ret; -/* From this point, the .release() function cleans up gpio_device */ - gdev->dev.release = gpiodev_release; - ret =gpiochip_sysfs_register (gdev);if (ret) goto err_remove_device;
@@ -825,6 +829,8 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, gdev =kzalloc (sizeof (*gdev),GFP_KERNEL );if (!gdev)return -ENOMEM ; + + gdev->dev.type = &gpio_dev_type; gdev->dev.bus = &gpio_bus_type; gdev->dev.parent = gc->parent; gdev->chip = gc;
@@ -851,7 +857,6 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,if (ret) goto err_free_ida; -device_initialize (&gdev->dev);if (gc->parent && gc->parent->driver) gdev->owner = gc->parent->driver->owner;else if (gc->owner)
Signature · 1 line
2.40.1
Quoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
It's useful to have the device type information for those sub-devices that are actually GPIO chips registered with GPIOLIB. While at it: use the device type struct to setup the release callback which is the preferred way to use the device API.
Signed-off-by Bartosz Golaszewski <[email protected]>
Quoted 10 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
It's useful to have the device type information for those sub-devices that are actually GPIO chips registered with GPIOLIB. While at it: use the device type struct to setup the release callback which is the preferred way to use the device API.
Signed-off-by Bartosz Golaszewski <[email protected]>---
Patch applied.
Bart