Bluetooth: hci_conn: Always use sk_timeo as conn_timeout
Subsystems (2)
Luiz Augusto von Dentz
maintainerPATCH v3 1/1 Bluetooth: hci_conn: Always use sk_timeo as conn_timeout
From: Luiz Augusto von Dentz <[email protected]>
This aligns the use socket sk_timeo as conn_timeout when initiating a connection and then use it when scheduling the resulting HCI command, that way the command is actually aborted synchronously thus not blocking commands generated by hci_abort_conn_sync to inform the controller the connection is to be aborted.
--- include/net/bluetooth/hci_core.h | 5 +++-- include/net/bluetooth/l2cap.h | 2 +- net/bluetooth/6lowpan.c | 2 +- net/bluetooth/hci_conn.c | 8 +++++--- net/bluetooth/hci_sync.c | 2 +- net/bluetooth/l2cap_core.c | 10 ++++------ net/bluetooth/l2cap_sock.c | 3 ++- net/bluetooth/mgmt.c | 3 ++- net/bluetooth/sco.c | 3 ++- 9 files changed, 21 insertions(+), 17 deletions(-)
include/net/bluetooth/hci_core.h +3 -2
@@ -1495,9 +1495,10 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst, u16 conn_timeout, u8 role);struct hci_conn *hci_connect_acl (struct hci_dev *hdev,bdaddr_t *dst,u8 sec_level,u8 auth_type, -enum conn_reasons conn_reason); +enum conn_reasons conn_reason,u16 timeout);struct hci_conn *hci_connect_sco (struct hci_dev *hdev,int type,bdaddr_t *dst, -__u16 setting,struct bt_codec *codec); +__u16 setting,struct bt_codec *codec, +u16 timeout);struct hci_conn *hci_bind_cis (struct hci_dev *hdev,bdaddr_t *dst,__u8 dst_type,struct bt_iso_qos *qos); struct hci_conn *hci_bind_bis(struct hci_dev *hdev, bdaddr_t *dst,
include/net/bluetooth/l2cap.h +1 -1
@@ -939,7 +939,7 @@ int l2cap_add_scid(struct l2cap_chan *chan, __u16 scid);struct l2cap_chan *l2cap_chan_create (void );void l2cap_chan_close (struct l2cap_chan *chan,int reason);int l2cap_chan_connect (struct l2cap_chan *chan,__le16 psm,u16 cid, -bdaddr_t *dst,u8 dst_type); +bdaddr_t *dst,u8 dst_type,u16 timeout);int l2cap_chan_reconfigure (struct l2cap_chan *chan,__u16 mtu);int l2cap_chan_send (struct l2cap_chan *chan,struct msghdr *msg,size_t len);void l2cap_chan_busy (struct l2cap_chan *chan,int busy);
net/bluetooth/6lowpan.c +1 -1
@@ -892,7 +892,7 @@ static int bt_6lowpan_connect(bdaddr_t *addr, u8 dst_type) chan->ops = &bt_6lowpan_chan_ops; err =l2cap_chan_connect (chan,cpu_to_le16 (L2CAP_PSM_IPSP ),0 , - addr, dst_type); + addr, dst_type,L2CAP_CONN_TIMEOUT );BT_DBG ("chan %p err %d" , chan, err);if (err <0 )
net/bluetooth/hci_conn.c +5 -3
@@ -1607,7 +1607,7 @@ struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,struct hci_conn *hci_connect_acl (struct hci_dev *hdev,bdaddr_t *dst,u8 sec_level,u8 auth_type, -enum conn_reasons conn_reason) +enum conn_reasons conn_reason,u16 timeout) {struct hci_conn *acl;
@@ -1643,6 +1643,7 @@ struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst, acl->sec_level =BT_SECURITY_LOW ; acl->pending_sec_level = sec_level; acl->auth_type = auth_type; + acl->conn_timeout = timeout; err =hci_acl_create_connection_sync (hdev, acl);if (err) {
@@ -1683,14 +1684,15 @@ static struct hci_link *hci_conn_link(struct hci_conn *parent, }struct hci_conn *hci_connect_sco (struct hci_dev *hdev,int type,bdaddr_t *dst, -__u16 setting,struct bt_codec *codec) +__u16 setting,struct bt_codec *codec, +u16 timeout) {struct hci_conn *acl;struct hci_conn *sco;struct hci_link *link; acl =hci_connect_acl (hdev, dst,BT_SECURITY_LOW ,HCI_AT_NO_BONDING , -CONN_REASON_SCO_CONNECT ); +CONN_REASON_SCO_CONNECT , timeout);if (IS_ERR (acl))return acl;
net/bluetooth/hci_sync.c +1 -1
@@ -6548,7 +6548,7 @@ static int __hci_acl_create_connection_sync(struct hci_dev *hdev, void *data) err =__hci_cmd_sync_status_sk (hdev,HCI_OP_CREATE_CONN ,sizeof (cp), &cp,HCI_EV_CONN_COMPLETE , -HCI_ACL_CONN_TIMEOUT ,NULL ); + conn->conn_timeout,NULL );if (err == -ETIMEDOUT )hci_abort_conn_sync (hdev, conn,HCI_ERROR_LOCAL_HOST_TERM );
net/bluetooth/l2cap_core.c +4 -6
@@ -6925,7 +6925,7 @@ static void l2cap_chan_by_pid(struct l2cap_chan *chan, void *data) }int l2cap_chan_connect (struct l2cap_chan *chan,__le16 psm,u16 cid, -bdaddr_t *dst,u8 dst_type) +bdaddr_t *dst,u8 dst_type,u16 timeout) {struct l2cap_conn *conn;struct hci_conn *hcon;
@@ -7018,19 +7018,17 @@ int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,if (hci_dev_test_flag (hdev,HCI_ADVERTISING )) hcon =hci_connect_le (hdev, dst, dst_type, false, - chan->sec_level, -HCI_LE_CONN_TIMEOUT , + chan->sec_level, timeout,HCI_ROLE_SLAVE );else hcon =hci_connect_le_scan (hdev, dst, dst_type, - chan->sec_level, -HCI_LE_CONN_TIMEOUT , + chan->sec_level, timeout,CONN_REASON_L2CAP_CHAN ); }else {u8 auth_type =l2cap_get_auth_type (chan); hcon =hci_connect_acl (hdev, dst, chan->sec_level, auth_type, -CONN_REASON_L2CAP_CHAN ); +CONN_REASON_L2CAP_CHAN , timeout); }if (IS_ERR (hcon)) {
net/bluetooth/l2cap_sock.c +2 -1
@@ -254,7 +254,8 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr, chan->mode =L2CAP_MODE_LE_FLOWCTL ; err =l2cap_chan_connect (chan, la.l2_psm,__le16_to_cpu (la.l2_cid), - &la.l2_bdaddr, la.l2_bdaddr_type); + &la.l2_bdaddr, la.l2_bdaddr_type, + sk->sk_sndtimeo);if (err)return err;
net/bluetooth/mgmt.c +2 -1
@@ -3444,7 +3444,8 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,if (cp->addr.type ==BDADDR_BREDR ) { conn =hci_connect_acl (hdev, &cp->addr.bdaddr, sec_level, - auth_type,CONN_REASON_PAIR_DEVICE ); + auth_type,CONN_REASON_PAIR_DEVICE , +HCI_ACL_CONN_TIMEOUT ); }else {u8 addr_type =le_addr_type (cp->addr.type);struct hci_conn_params *p;
net/bluetooth/sco.c +2 -1
@@ -264,7 +264,8 @@ static int sco_connect(struct sock *sk) } hcon =hci_connect_sco (hdev, type, &sco_pi (sk)->dst, -sco_pi (sk)->setting, &sco_pi (sk)->codec); +sco_pi (sk)->setting, &sco_pi (sk)->codec, + sk->sk_sndtimeo);if (IS_ERR (hcon)) { err =PTR_ERR (hcon); goto unlock;
Signature · 1 line
2.43.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=824332
---Test result---
Test Summary:
CheckPatch PASS 2.15 seconds GitLint PASS 0.32 seconds SubjectPrefix PASS 0.12 seconds BuildKernel PASS 27.80 seconds CheckAllWarning PASS 30.63 seconds CheckSparse WARNING 36.39 seconds CheckSmatch WARNING 98.73 seconds BuildKernel32 PASS 26.92 seconds TestRunnerSetup PASS 496.73 seconds TestRunner_l2cap-tester PASS 18.19 seconds TestRunner_iso-tester PASS 34.46 seconds TestRunner_bnep-tester PASS 4.85 seconds TestRunner_mgmt-tester FAIL 167.45 seconds TestRunner_rfcomm-tester PASS 7.38 seconds TestRunner_sco-tester PASS 15.02 seconds TestRunner_ioctl-tester PASS 7.87 seconds TestRunner_mesh-tester PASS 7.10 seconds TestRunner_smp-tester PASS 6.88 seconds TestRunner_userchan-tester PASS 5.04 seconds IncrementalBuild PASS 26.40 seconds
Details
##############################
Test: CheckSparse - WARNING
Desc: Run sparse tool with linux kernel
Output:net/bluetooth/sco.c: note: in included file:./include/net/bluetooth/hci_core.h:150:35: warning: array of flexible structures
##############################
Test: CheckSmatch - WARNING
Desc: Run smatch tool with source
Output:net/bluetooth/sco.c: note: in included file:./include/net/bluetooth/hci_core.h:150:35: warning: array of flexible structures
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 487 (99.0%), Failed: 4, Not Run: 1
Failed Test Cases
LL Privacy - Add Device 4 (2 Devices to AL) Failed 0.115 seconds LL Privacy - Add Device 6 (RL is full) Failed 0.143 seconds LL Privacy - Add Device 7 (AL is full) Failed 0.147 seconds LL Privacy - Remove Device 4 (Disable Adv) Timed out 2.427 seconds
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 9 lines · On Thu, 8 Feb 2024 09:02:40 -0500 you wrote:
From: Luiz Augusto von Dentz <[email protected]>
This aligns the use socket
sk_timeoasconn_timeoutwhen initiating a connection and then use it when scheduling the resulting HCI command, that way the command is actually aborted synchronously thus not blocking commands generated byhci_abort_conn_syncto inform the controller the connection is to be aborted.[...]
Here is the summary with links:
- [v3] Bluetooth: hci_conn: Always use sk_timeo as conn_timeout
https://git.kernel.org/bluetooth/bluetooth-next/c/1405ad2e8a9d
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html