net/mana: add vlan tagging support
PATCH 1/1 net/mana: add vlan tagging support
For tx path, use LONG_PACKET_FORMAT if vlan tag is present. For rx, extract vlan id from oob, put into mbuf and set the vlan flags in mbuf.
Also add myself to the maintainers list for vmbus, mana and netvsc.
--- MAINTAINERS | 3 +++ drivers/net/mana/mana.h | 2 ++ drivers/net/mana/rx.c | 6 ++++++ drivers/net/mana/tx.c | 30 +++++++++++++++++++++++++++--- 4 files changed, 38 insertions(+), 3 deletions(-)
MAINTAINERS +3 -0
@@ -608,6 +608,7 @@ F: app/test/test_vdev.c VMBUS bus driver M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/bus/vmbus/
@@ -867,6 +868,7 @@ F: doc/guides/nics/features/mlx5.ini Microsoft mana M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/mana/ F: doc/guides/nics/mana.rst F: doc/guides/nics/features/mana.ini
@@ -878,6 +880,7 @@ F: doc/guides/nics/vdev_netvsc.rst Microsoft Hyper-V netvsc M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/netvsc/ F: doc/guides/nics/netvsc.rst F: doc/guides/nics/features/netvsc.ini
drivers/net/mana/mana.h +2 -0
@@ -21,10 +21,12 @@ struct mana_shared_data {#define MANA_MAX_MAC_ADDR 1#define MANA_DEV_RX_OFFLOAD_SUPPORT ( \ + RTE_ETH_RX_OFFLOAD_VLAN_STRIP | \ RTE_ETH_RX_OFFLOAD_CHECKSUM | \ RTE_ETH_RX_OFFLOAD_RSS_HASH)#define MANA_DEV_TX_OFFLOAD_SUPPORT ( \ + RTE_ETH_TX_OFFLOAD_VLAN_INSERT | \ RTE_ETH_TX_OFFLOAD_MULTI_SEGS | \ RTE_ETH_TX_OFFLOAD_IPV4_CKSUM | \ RTE_ETH_TX_OFFLOAD_TCP_CKSUM | \
drivers/net/mana/rx.c +6 -0
@@ -517,6 +517,12 @@ mana_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n) mbuf->hash.rss = oob->packet_info[pkt_idx].packet_hash; } +if (oob->rx_vlan_tag_present) { + mbuf->ol_flags |= +RTE_MBUF_F_RX_VLAN |RTE_MBUF_F_RX_VLAN_STRIPPED ; + mbuf->vlan_tci = oob->rx_vlan_id; + } + pkts[pkt_received++] = mbuf; rxq->stats.packets++; rxq->stats.bytes += mbuf->data_len;
drivers/net/mana/tx.c +27 -3
@@ -180,6 +180,15 @@ get_vsq_frame_num(uint32_t vsq)return v.vsq_frame; } +#define VLAN_PRIO_MASK 0xe000/* Priority Code Point */ +#define VLAN_PRIO_SHIFT 13 +#define VLAN_CFI_MASK 0x1000/* Canonical Format Indicator / Drop Eligible Indicator */ +#define VLAN_VID_MASK 0x0fff/* VLAN Identifier */ + +#define mana_mbuf_vlan_tag_get_id (m) ((m)->vlan_tci & VLAN_VID_MASK) +#define mana_mbuf_vlan_tag_get_cfi (m) (!!((m)->vlan_tci & VLAN_CFI_MASK)) +#define mana_mbuf_vlan_tag_get_prio (m) (((m)->vlan_tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT) +uint16_t mana_tx_burst (void *dpdk_txq,struct rte_mbuf **tx_pkts,uint16_t nb_pkts) {
@@ -254,7 +263,18 @@ mana_tx_burst(void *dpdk_txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) }/* Fill in the oob */ - tx_oob.short_oob.packet_format =SHORT_PACKET_FORMAT ; +if (m_pkt->ol_flags &RTE_MBUF_F_TX_VLAN ) { + tx_oob.short_oob.packet_format =LONG_PACKET_FORMAT ; + tx_oob.long_oob.inject_vlan_prior_tag =1 ; + tx_oob.long_oob.priority_code_point = +mana_mbuf_vlan_tag_get_prio (m_pkt); + tx_oob.long_oob.drop_eligible_indicator = +mana_mbuf_vlan_tag_get_cfi (m_pkt); + tx_oob.long_oob.vlan_identifier = +mana_mbuf_vlan_tag_get_id (m_pkt); + }else { + tx_oob.short_oob.packet_format =SHORT_PACKET_FORMAT ; + } tx_oob.short_oob.tx_is_outer_ipv4 = m_pkt->ol_flags &RTE_MBUF_F_TX_IPV4 ?1 :0 ; tx_oob.short_oob.tx_is_outer_ipv6 =
@@ -409,8 +429,12 @@ mana_tx_burst(void *dpdk_txq, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) work_req.sgl = sgl.gdma_sgl; work_req.num_sgl_elements = m_pkt->nb_segs; - work_req.inline_oob_size_in_bytes = -sizeof (struct transmit_short_oob_v2 ); +if (tx_oob.short_oob.packet_format ==SHORT_PACKET_FORMAT ) + work_req.inline_oob_size_in_bytes = +sizeof (struct transmit_short_oob_v2 ); +else + work_req.inline_oob_size_in_bytes = +sizeof (struct transmit_oob_v2 ); work_req.inline_oob_data = &tx_oob; work_req.flags =0 ; work_req.client_data_unit =NOT_USING_CLIENT_DATA_UNIT ;
Signature · 1 line
2.34.1
Quoted 36 lines · Wei Hu
For tx path, use
LONG_PACKET_FORMATif vlan tag is present. For rx, extract vlan id from oob, put into mbuf and set the vlan flags in mbuf.Also add myself to the maintainers list for vmbus, mana and netvsc.
Signed-off-by Wei Hu <[email protected]>--- MAINTAINERS | 3 +++ drivers/net/mana/mana.h | 2 ++ drivers/net/mana/rx.c | 6 ++++++ drivers/net/mana/tx.c | 30 +++++++++++++++++++++++++++--- 4 files changed, 38 insertions(+), 3 deletions(-)MAINTAINERS +2
-0@@ -608,6 +608,7 @@ F: app/test/test_vdev.c VMBUS bus driver M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/bus/vmbus/@@ -867,6 +868,7 @@ F: doc/guides/nics/features/mlx5.ini Microsoft mana M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/mana/ F: doc/guides/nics/mana.rst F: doc/guides/nics/features/mana.ini
MAINTAINERS F: doc/guides/nics/vdev_netvsc.rst · line 886
Quoted 7 lines
MAINTAINERS +1
-0@@ -878,6 +880,7 @@ F: doc/guides/nics/vdev_netvsc.rst Microsoft Hyper-V netvsc M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/netvsc/ F: doc/guides/nics/netvsc.rst F: doc/guides/nics/features/netvsc.ini
Hi Wei,
Can you please separate the maintainer file update to its own patch?
Quoted 57 lines
-----Original Message-----
From: Ferruh Yigit <[email protected]>
Sent: Saturday, February 10, 2024 12:06 AM
To: Wei Hu <[email protected]>; [email protected]; Thomas Monjalon <[email protected]>; Long Li <[email protected]>
Cc: [email protected]
Subject: Re: [PATCH 1/1] net/mana: add vlan tagging supportQuoted 36 lines · Wei Hu
For tx path, use
LONG_PACKET_FORMATif vlan tag is present. For rx, extract vlan id from oob, put into mbuf and set the vlan flags in mbuf.Also add myself to the maintainers list for vmbus, mana and netvsc.
Signed-off-by Wei Hu <[email protected]>--- MAINTAINERS | 3 +++ drivers/net/mana/mana.h | 2 ++ drivers/net/mana/rx.c | 6 ++++++ drivers/net/mana/tx.c | 30 +++++++++++++++++++++++++++--- 4 files changed, 38 insertions(+), 3 deletions(-)MAINTAINERS index 5fb3a73f84..9983d013a6 renamed from MAINTAINERS +0
-0100644
MAINTAINERS +2
-0@@ -608,6 +608,7 @@ F: app/test/test_vdev.c VMBUS bus driver M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/bus/vmbus/@@ -867,6 +868,7 @@ F: doc/guides/nics/features/mlx5.ini Microsoft mana M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/mana/ F: doc/guides/nics/mana.rst F: doc/guides/nics/features/mana.iniMAINTAINERS F: doc/guides/nics/vdev_netvsc.rst · line 886
Quoted 7 lines
MAINTAINERS +1
-0@@ -878,6 +880,7 @@ F: doc/guides/nics/vdev_netvsc.rst Microsoft Hyper-V netvsc M: Long Li <[email protected]> +M: Wei Hu <[email protected]> F: drivers/net/netvsc/ F: doc/guides/nics/netvsc.rst F: doc/guides/nics/features/netvsc.iniHi Wei,
Quoted 1 line
Can you please separate the maintainer file update to its own patch?
Sure. I will remove the maintainer file update and send it out later separately.
Thanks,
Wei
drivers/net/mana/rx.c mana_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n) · line 525
Quoted 7 lines
drivers/net/mana/rx.c +3
-0+if (oob->rx_vlan_tag_present) { + mbuf->ol_flags |= + RTE_MBUF_F_RX_VLAN |
RTE_MBUF_F_RX_VLAN_STRIPPED;drivers/net/mana/rx.c +3
-0+ mbuf->vlan_tci = oob->rx_vlan_id; + } +
Netvsc has the following code for dealing with vlan on RX mbufs (in hn_rxtx.c):
/* NDIS always strips tag, put it back if necessary */
if (!hv->vlan_strip && rte_vlan_insert(&m)) {It seems we should do the same?
Quoted 18 lines
drivers/net/mana/rx.c +0
-0pkts[pkt_received++] = mbuf; rxq->stats.packets++; rxq->stats.bytes += mbuf->data_len;drivers/net/mana/tx.c index renamed from drivers/net/mana/tx.c +0
-0
58c4a1d976..f075fcb0f5100644drivers/net/mana/tx.c +3
-0@@ -180,6 +180,15 @@ get_vsq_frame_num(uint32_t vsq)return v.vsq_frame; } +#define VLAN_PRIO_MASK 0xe000/* Priority Code Point */ +#define VLAN_PRIO_SHIFT 13 +#define VLAN_CFI_MASK 0x1000/* Canonical Format Indicator / Drop Eligible Indicator */
drivers/net/mana/tx.c +3
-0+#define VLAN_VID_MASK 0x0fff/* VLAN Identifier */ + +#define mana_mbuf_vlan_tag_get_id (m) ((m)->vlan_tci &
Quoted 6 lines
VLAN_VID_MASK)
+#definemana_mbuf_vlan_tag_get_cfi(m)(!!((m)->vlan_tci &VLAN_CFI_MASK))
+#definemana_mbuf_vlan_tag_get_prio(m)(((m)->vlan_tci &VLAN_PRIO_MASK) >>VLAN_PRIO_SHIFT)
+
Those definitions look like those in @Alan Elder's patch for netvsc. Can we consolidate some of those definitions into a common place?
Maybe in "lib/net/rte_ether.h"?
Thanks,
Long
Quoted 20 lines
-----Original Message-----
From: Long Li <[email protected]>
Sent: Saturday, February 10, 2024 2:48 AM
To: Wei Hu <[email protected]>; [email protected]; [email protected]; Thomas Monjalon <[email protected]>; Alan Elder <[email protected]>
Cc: [email protected]
Subject: RE: [PATCH 1/1] net/mana: add vlan tagging supportdrivers/net/mana/rx.c mana_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n) · line 525
Quoted 7 lines
drivers/net/mana/rx.c +3
-0+if (oob->rx_vlan_tag_present) { + mbuf->ol_flags |= + RTE_MBUF_F_RX_VLAN |
RTE_MBUF_F_RX_VLAN_STRIPPED;drivers/net/mana/rx.c +3
-0+ mbuf->vlan_tci = oob->rx_vlan_id; + } +Netvsc has the following code for dealing with vlan on RX mbufs (in
hn_rxtx.c):
Quoted 4 lines
/* NDIS always strips tag, put it back if necessary */ if (!hv->vlan_strip && rte_vlan_insert(&m)) {It seems we should do the same?
Not sure if we want to do the same. Two reasons.
1. Searching the netvsc source, I don't see a place that it set hv->vlan_strip to false. It means !hv->vlan_string is always false, and rte_vlan_insert(&m) never run.
2. Usually vlan_strip can be set to true or false if the hardware supports this feature. In the mana case, the hardware strips off the vlan tag anyway. There is no way to tell the mana hardware to keep the tag. Adding the tag back by software not only slows things down, but it also complicates the code and test. Not sure if there is any real application needs it.
I am open to add it. But in my opinion, we don't need it. Let me know what you think.
Quoted 29 lines
Quoted 19 lines
drivers/net/mana/rx.c +0
-0pkts[pkt_received++] = mbuf; rxq->stats.packets++; rxq->stats.bytes += mbuf->data_len; diff --git
a/drivers/net/mana/tx.cb/drivers/net/mana/tx.cindex58c4a1d976..f075fcb0f5100644drivers/net/mana/tx.c +3
-0@@ -180,6 +180,15 @@ get_vsq_frame_num(uint32_t vsq)return v.vsq_frame; } +#define VLAN_PRIO_MASK 0xe000/* Priority Code Point */ +#define VLAN_PRIO_SHIFT 13 +#define VLAN_CFI_MASK 0x1000/* Canonical Format Indicator / Drop Eligible Indicator */
drivers/net/mana/tx.c +3
-0+#define VLAN_VID_MASK 0x0fff/* VLAN Identifier */ + +#define mana_mbuf_vlan_tag_get_id (m) ((m)->vlan_tci &Quoted 6 lines
VLAN_VID_MASK)
+#definemana_mbuf_vlan_tag_get_cfi(m)(!!((m)->vlan_tci &VLAN_CFI_MASK))
+#definemana_mbuf_vlan_tag_get_prio(m)(((m)->vlan_tci &VLAN_PRIO_MASK) >>VLAN_PRIO_SHIFT)
+Those definitions look like those in @Alan Elder's patch for netvsc. Can we consolidate some of those definitions into a common place?
Quoted 2 lines
Maybe in "
lib/net/rte_ether.h"?
Ok. Will add it to rte_ether.h.
Thanks,
Wei
Quoted 3 lines
Thanks,
Long
Quoted 5 lines
Not sure if we want to do the same. Two reasons.
1. Searching the netvsc source, I don't see a place that it set
hv->vlan_stripto false. It means !hv->vlan_string is always false, andrte_vlan_insert(&m)never run.
It's set here:drivers/net/netvsc/hn_ethdev.c: hv->vlan_strip = !!(rxmode->offloads & RTE_ETH_RX_OFFLOAD_VLAN_STRIP);
Quoted 6 lines
2. Usually
vlan_stripcan be set to true or false if the hardware supports this feature. In the mana case, the hardware strips off the vlan tag anyway. There is no way to tell the mana hardware to keep the tag. Adding the tag back by software not only slows things down, but it also complicates the code and test. Not sure if there is any real application needs it.
If MANA always strips the tag, you need to add the tag back if needed.
Quoted 32 lines
I am open to add it. But in my opinion, we don't need it. Let me know what you think.
Quoted 29 lines
Quoted 19 lines
drivers/net/mana/rx.c +0
-0pkts[pkt_received++] = mbuf; rxq->stats.packets++; rxq->stats.bytes += mbuf->data_len; diff --git
a/drivers/net/mana/tx.cb/drivers/net/mana/tx.cindex58c4a1d976..f075fcb0f5100644drivers/net/mana/tx.c +3
-0@@ -180,6 +180,15 @@ get_vsq_frame_num(uint32_t vsq)return v.vsq_frame; } +#define VLAN_PRIO_MASK 0xe000/* Priority Code Point */ +#define VLAN_PRIO_SHIFT 13 +#define VLAN_CFI_MASK 0x1000/* Canonical Format Indicator / Drop Eligible Indicator */
drivers/net/mana/tx.c +3
-0+#define VLAN_VID_MASK 0x0fff/* VLAN Identifier */ + +#define mana_mbuf_vlan_tag_get_id (m) ((m)->vlan_tci &Quoted 6 lines
VLAN_VID_MASK)
+#definemana_mbuf_vlan_tag_get_cfi(m)(!!((m)->vlan_tci &VLAN_CFI_MASK))
+#definemana_mbuf_vlan_tag_get_prio(m)(((m)->vlan_tci &VLAN_PRIO_MASK) >>VLAN_PRIO_SHIFT)
+Those definitions look like those in @Alan Elder's patch for netvsc. Can we consolidate some of those definitions into a common place?
Quoted 4 lines
Quoted 2 lines
Maybe in "
lib/net/rte_ether.h"?Ok. Will add it to
rte_ether.h.
@Alan has sent a patch for some helper marcos for parsing vlan_tci, please use those helper marcos in
https://git.dpdk.org/next/dpdk-next-net/commit/?id=f9c66ea9b5bfd15f314f6d101f156a312121e7e1
Thanks,
Long