thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
Subsystems (3)
PATCH 1/1 thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
Olliver reported that his system crashes when plugging in Thunderbolt 1 device:
BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>
This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
---
Hi Olliver,
I managed to reproduce this with a Thunderbolt 1 device. I wonder if you can try this patch and see if it fixes your issue too?
drivers/thunderbolt/switch.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/thunderbolt/switch.c +3 -0
@@ -1256,6 +1256,9 @@ int tb_port_update_credits(struct tb_port *port) ret =tb_port_do_update_credits (port);if (ret)return ret; + +if (!port->dual_link_port) +return 0 ;return tb_port_do_update_credits (port->dual_link_port); }
Signature · 1 line
2.43.0
Hey Mika,
Quoted 39 lines · Mika Westerberg
Olliver reported that his system crashes when plugging in Thunderbolt 1 device:
BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
Reported-by Olliver Schinagl <[email protected]>Fixes 81af2952e606 ("thunderbolt: Add support for asymmetric link")Cc Gil Fine <[email protected]>Signed-off-by Mika Westerberg <[email protected]>
Quoted 5 lines
---
Hi Olliver,I managed to reproduce this with a Thunderbolt 1 device. I wonder if you can try this patch and see if it fixes your issue too?
That sounds reasonable, as it's an old Macbook (Should be TB2) with an old ethernet dongle (probably TB1?) or simply because it doesn't need that much speed (gbit adapter only). Sadly patching my kernel is not something I can do at the moment.
Olliver
Quoted 18 lines
drivers/thunderbolt/switch.c | 3 +++ 1 file changed, 3 insertions(+)drivers/thunderbolt/switch.c +3
-0@@ -1256,6 +1256,9 @@ int tb_port_update_credits(struct tb_port *port) ret =tb_port_do_update_credits (port);if (ret)return ret; + +if (!port->dual_link_port) +return 0 ;return tb_port_do_update_credits (port->dual_link_port); }
Quoted 45 lines · Olliver Schinagl
Hey Mika,
Quoted 42 lines · Mika Westerberg
Olliver reported that his system crashes when plugging in Thunderbolt 1 device:
BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
Reported-by Olliver Schinagl <[email protected]>Fixes 81af2952e606 ("thunderbolt: Add support for asymmetric link")Cc Gil Fine <[email protected]>Signed-off-by Mika Westerberg <[email protected]>---
Hi Olliver,
Quoted 7 lines
Quoted 2 lines
I managed to reproduce this with a Thunderbolt 1 device. I wonder if you can try this patch and see if it fixes your issue too?
That sounds reasonable, as it's an old Macbook (Should be TB2) with an old ethernet dongle (probably TB1?) or simply because it doesn't need that much speed (gbit adapter only). Sadly patching my kernel is not something I can do at the moment.
Right, if you plug in a TB1 device into TB2 host, that's also same issue (TB1 devices don't always have two lane adapters).
It's fine if you cannot test this (but let me know if you want instructions). I can pick this into my fixes branch and send for -rc. It should land the arch Linux kernel tree at some point too, so you get it by upgrading the kernel.
Quoted 54 lines · Mika Westerberg
Quoted 45 lines · Olliver Schinagl
Hey Mika,
Quoted 42 lines · Mika Westerberg
Olliver reported that his system crashes when plugging in Thunderbolt 1 device:
BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
Reported-by Olliver Schinagl <[email protected]>Fixes 81af2952e606 ("thunderbolt: Add support for asymmetric link")Cc Gil Fine <[email protected]>Signed-off-by Mika Westerberg <[email protected]>---
Hi Olliver,Quoted 7 lines
Quoted 2 lines
I managed to reproduce this with a Thunderbolt 1 device. I wonder if you can try this patch and see if it fixes your issue too?
That sounds reasonable, as it's an old Macbook (Should be TB2) with an old ethernet dongle (probably TB1?) or simply because it doesn't need that much speed (gbit adapter only). Sadly patching my kernel is not something I can do at the moment.
Quoted 7 lines
Right, if you plug in a TB1 device into TB2 host, that's also same issue (TB1 devices don't always have two lane adapters).
It's fine if you cannot test this (but let me know if you want instructions). I can pick this into my fixes branch and send for -rc. It should land the arch Linux kernel tree at some point too, so you get it by upgrading the kernel.
Yeah, I'll gently wait for it to land there. I'm using a 10/100Mbit USB adapter for those few times I need it :)
Thanks for looking into this!
Olliver
Mika Westerberg
AppliedQuoted 33 lines · Mika Westerberg
Olliver reported that his system crashes when plugging in Thunderbolt 1 device:
BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt] Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tb_port_do_update_credits+0x1b/0x130 ? tb_switch_update_link_attributes+0x83/0xd0 tb_switch_add+0x7a2/0xfe0 tb_scan_port+0x236/0x6f0 tb_handle_hotplug+0x6db/0x900 process_one_work+0x171/0x340 worker_thread+0x27b/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK>This is due the fact that some Thunderbolt 1 devices only have one lane adapter. Fix this by checking for the lane 1 before we read its credits.
Quoted 6 lines
Reported-by Olliver Schinagl <[email protected]>Fixes 81af2952e606 ("thunderbolt: Add support for asymmetric link")Cc Gil Fine <[email protected]>Signed-off-by Mika Westerberg <[email protected]>
Applied to thunderbolt.git/fixes.