Skip to contentSkip to conversation

smartpqi: fix disable_managed_interrupts

PATCH Applied Don Brace 4 participants 5 messages Feb 13, 2024 – Feb 15, 2024

Subsystems (2)
lore
Share & tools
lore

Don Brace

author maintainer
#0 lore raw

PATCH 1/1 smartpqi: fix disable_managed_interrupts

Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.

When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.

Stack Trace:

[    7.860089] scsi host2: smartpqi
[    7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0
[    7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[    7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1
[    7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022
[    7.963026] Workqueue: events work_for_cpu_fn
[    7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0
[    7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54
[    7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216
[    7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010
[    7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310
[    7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00
[    7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000
[    7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8
[    7.978290] FS:  0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000
[    7.978292] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0
[    8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.172818] PKRU: 55555554
[    8.172819] Call Trace:
[    8.172823]  blk_mq_alloc_tag_set+0x12e/0x310
[    8.264339]  scsi_add_host_with_dma.cold.9+0x30/0x245
[    8.279302]  pqi_ctrl_init+0xacf/0xc8e [smartpqi]
[    8.294085]  ? pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.309015]  pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.323286]  local_pci_probe+0x42/0x80
[    8.337855]  work_for_cpu_fn+0x16/0x20
[    8.351193]  process_one_work+0x1a7/0x360
[    8.364462]  ? create_worker+0x1a0/0x1a0
[    8.379252]  worker_thread+0x1ce/0x390
[    8.392623]  ? create_worker+0x1a0/0x1a0
[    8.406295]  kthread+0x10a/0x120
[    8.418428]  ? set_kthread_struct+0x50/0x50
[    8.431532]  ret_from_fork+0x1f/0x40
[    8.444137] ---[ end trace 1bf0173d39354506 ]---
Fixes ("cf15c3e734e8 scsi: smartpqi: Add module param to disable managed ints")
---
 drivers/scsi/smartpqi/smartpqi_init.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/smartpqi/smartpqi_init.c +4 -1
index ceff1ec13f9e..385180c98be4 100644
@@ -6533,8 +6533,11 @@ static void pqi_map_queues(struct Scsi_Host *shost)
 {
 	struct pqi_ctrl_info *ctrl_info = shost_to_hba(shost);
 
-	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+	if (!ctrl_info->disable_managed_interrupts)
+		return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
 			      ctrl_info->pci_dev, 0);
+	else
+		return blk_mq_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT]);
 }
 
 static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
Signature · 1 line
2.44.0.rc0
author maintainer
#1 lore raw

PATCH 1/1 smartpqi: fix disable_managed_interrupts

Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.

When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.

Stack Trace:

[    7.860089] scsi host2: smartpqi
[    7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0
[    7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[    7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1
[    7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022
[    7.963026] Workqueue: events work_for_cpu_fn
[    7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0
[    7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54
[    7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216
[    7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010
[    7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310
[    7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00
[    7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000
[    7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8
[    7.978290] FS:  0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000
[    7.978292] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0
[    8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.172818] PKRU: 55555554
[    8.172819] Call Trace:
[    8.172823]  blk_mq_alloc_tag_set+0x12e/0x310
[    8.264339]  scsi_add_host_with_dma.cold.9+0x30/0x245
[    8.279302]  pqi_ctrl_init+0xacf/0xc8e [smartpqi]
[    8.294085]  ? pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.309015]  pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.323286]  local_pci_probe+0x42/0x80
[    8.337855]  work_for_cpu_fn+0x16/0x20
[    8.351193]  process_one_work+0x1a7/0x360
[    8.364462]  ? create_worker+0x1a0/0x1a0
[    8.379252]  worker_thread+0x1ce/0x390
[    8.392623]  ? create_worker+0x1a0/0x1a0
[    8.406295]  kthread+0x10a/0x120
[    8.418428]  ? set_kthread_struct+0x50/0x50
[    8.431532]  ret_from_fork+0x1f/0x40
[    8.444137] ---[ end trace 1bf0173d39354506 ]---
Fixes ("cf15c3e734e8 scsi: smartpqi: Add module param to disable managed ints")
---
 drivers/scsi/smartpqi/smartpqi_init.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/smartpqi/smartpqi_init.c +4 -1
index ceff1ec13f9e..385180c98be4 100644
@@ -6533,8 +6533,11 @@ static void pqi_map_queues(struct Scsi_Host *shost)
 {
 	struct pqi_ctrl_info *ctrl_info = shost_to_hba(shost);
 
-	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+	if (!ctrl_info->disable_managed_interrupts)
+		return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
 			      ctrl_info->pci_dev, 0);
+	else
+		return blk_mq_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT]);
 }
 
 static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
Signature · 1 line
2.44.0.rc0
Reviewed-by on v1 1/1
#2 lore raw
Quoted 37 lines · Don Brace

Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.

When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.

Stack Trace:

[    7.860089] scsi host2: smartpqi
[    7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0
[    7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[    7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1
[    7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022
[    7.963026] Workqueue: events work_for_cpu_fn
[    7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0
[    7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54
[    7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216
[    7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010
[    7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310
[    7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00
[    7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000
[    7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8
[    7.978290] FS:  0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000
[    7.978292] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0
[    8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.172818] PKRU: 55555554
[    8.172819] Call Trace:
[    8.172823]  blk_mq_alloc_tag_set+0x12e/0x310
[    8.264339]  scsi_add_host_with_dma.cold.9+0x30/0x245
[    8.279302]  pqi_ctrl_init+0xacf/0xc8e [smartpqi]
[    8.294085]  ? pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.309015]  pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.323286]  local_pci_probe+0x42/0x80
[    8.337855]  work_for_cpu_fn+0x16/0x20
Quoted 8 lines
[    8.351193]  process_one_work+0x1a7/0x360
[    8.364462]  ? create_worker+0x1a0/0x1a0
[    8.379252]  worker_thread+0x1ce/0x390
[    8.392623]  ? create_worker+0x1a0/0x1a0
[    8.406295]  kthread+0x10a/0x120
[    8.418428]  ? set_kthread_struct+0x50/0x50
[    8.431532]  ret_from_fork+0x1f/0x40
[    8.444137] ---[ end trace 1bf0173d39354506 ]---

This patch fixes the issue on my machine.

Quoted 31 lines
Fixes ("cf15c3e734e8 scsi: smartpqi: Add module param to disable managed ints")
---
 drivers/scsi/smartpqi/smartpqi_init.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/smartpqi/smartpqi_init.c +4 -1
index ceff1ec13f9e..385180c98be4 100644
@@ -6533,8 +6533,11 @@ static void pqi_map_queues(struct Scsi_Host *shost)
 {
 	struct pqi_ctrl_info *ctrl_info = shost_to_hba(shost);
 
-	blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+	if (!ctrl_info->disable_managed_interrupts)
+		return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
 			      ctrl_info->pci_dev, 0);
+	else
+		return blk_mq_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT]);
 }
 
 static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
Reviewed-by
#3 lore raw
Quoted 48 lines · Tomas Henzl
Quoted 37 lines · Don Brace

Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.

When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.

Stack Trace:

[    7.860089] scsi host2: smartpqi
[    7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0
[    7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse
[    7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1
[    7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022
[    7.963026] Workqueue: events work_for_cpu_fn
[    7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0
[    7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54
[    7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216
[    7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010
[    7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310
[    7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00
[    7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000
[    7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8
[    7.978290] FS:  0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000
[    7.978292] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0
[    8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.172818] PKRU: 55555554
[    8.172819] Call Trace:
[    8.172823]  blk_mq_alloc_tag_set+0x12e/0x310
[    8.264339]  scsi_add_host_with_dma.cold.9+0x30/0x245
[    8.279302]  pqi_ctrl_init+0xacf/0xc8e [smartpqi]
[    8.294085]  ? pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.309015]  pqi_pci_probe+0x480/0x4c8 [smartpqi]
[    8.323286]  local_pci_probe+0x42/0x80
[    8.337855]  work_for_cpu_fn+0x16/0x20
Quoted 8 lines
[    8.351193]  process_one_work+0x1a7/0x360
[    8.364462]  ? create_worker+0x1a0/0x1a0
[    8.379252]  worker_thread+0x1ce/0x390
[    8.392623]  ? create_worker+0x1a0/0x1a0
[    8.406295]  kthread+0x10a/0x120
[    8.418428]  ? set_kthread_struct+0x50/0x50
[    8.431532]  ret_from_fork+0x1f/0x40
[    8.444137] ---[ end trace 1bf0173d39354506 ]---
Quoted 3 lines

This patch fixes the issue on my machine.

Quoted 34 lines
Quoted 32 lines
Fixes ("cf15c3e734e8 scsi: smartpqi: Add module param to disable managed ints")
---
 drivers/scsi/smartpqi/smartpqi_init.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/scsi/smartpqi/smartpqi_init.c +4 -1
index ceff1ec13f9e..385180c98be4 100644
@@ -6533,8 +6533,11 @@ static void pqi_map_queues(struct Scsi_Host *shost)
 {
      struct pqi_ctrl_info *ctrl_info = shost_to_hba(shost);
 
-     blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
+     if (!ctrl_info->disable_managed_interrupts)
+             return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT],
                            ctrl_info->pci_dev, 0);
+     else
+             return blk_mq_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT]);
 }
 
 static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
#4 lore raw
In reply to Don Brace
Quoted 9 lines · Don Brace

Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.

When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.

[...]

Applied to 6.8/scsi-fixes, thanks!

[1/1] smartpqi: fix disable_managed_interrupts

      https://git.kernel.org/mkp/scsi/c/5761eb9761d2
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering