Skip to contentSkip to conversation

gpio: fix SRCU bugs

PATCH In review Bartosz Golaszewski 7 participants 18 messages Feb 14, 2024 – Feb 27, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover gpio: fix SRCU bugs

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

v1 -> v2:
- use srcu_dereference() instead of rcu_dereference_protected() as advised by Paul
- add a patch using rcu_dereference_check(..., 1) in deprecated interfaces that return the address of the RCU-protected chip structure to external users (who shouldn't use it anyway but well...)
- pick up review tags for patches 1/4 and 2/4

Bartosz Golaszewski (4):
gpio: take the SRCU read lock in gpiod_hog()
gpio: cdev: use correct pointer accessors with SRCU
gpio: use srcu_dereference() with SRCU-protected pointers
gpio: don't let lockdep complain about inherently dangerous RCU usage

 drivers/gpio/gpiolib-cdev.c  | 25 ++++++++++++-------------
 drivers/gpio/gpiolib-sysfs.c |  5 +++--
 drivers/gpio/gpiolib.c       | 32 ++++++++++++++++++--------------
 drivers/gpio/gpiolib.h       |  3 ++-
 4 files changed, 35 insertions(+), 30 deletions(-)
Signature · 1 line
2.40.1
#1 lore raw

PATCH v2 1/4 gpio: take the SRCU read lock in gpiod_hog()

From: Bartosz Golaszewski <[email protected]>

gpiod_hog() may be called without the gpio_device SRCU read lock taken so we need to do it here as well. It's alright if someone else is already holding the lock as SRCU read critical sections can be nested.

Fixes d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
---
 drivers/gpio/gpiolib.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/gpio/gpiolib.c +7 -4
index f5434e559382..439d32d5aa38 100644
@@ -4492,24 +4492,27 @@ EXPORT_SYMBOL_GPL(gpiod_get_index_optional);
 int gpiod_hog(struct gpio_desc *desc, const char *name,
 	      unsigned long lflags, enum gpiod_flags dflags)
 {
-	struct gpio_chip *gc;
+	struct gpio_device *gdev = desc->gdev;
 	struct gpio_desc *local_desc;
 	int hwnum;
 	int ret;
 
+	CLASS(gpio_chip_guard, guard)(desc);
+	if (!guard.gc)
+		return -ENODEV;
+
 	if (test_and_set_bit(FLAG_IS_HOGGED, &desc->flags))
 		return 0;
 
-	gc = gpiod_to_chip(desc);
 	hwnum = gpio_chip_hwgpio(desc);
 
-	local_desc = gpiochip_request_own_desc(gc, hwnum, name,
+	local_desc = gpiochip_request_own_desc(guard.gc, hwnum, name,
 					       lflags, dflags);
 	if (IS_ERR(local_desc)) {
 		clear_bit(FLAG_IS_HOGGED, &desc->flags);
 		ret = PTR_ERR(local_desc);
 		pr_err("requesting hog GPIO %s (chip %s, offset %d) failed, %d\n",
-		       name, gc->label, hwnum, ret);
+		       name, gdev->label, hwnum, ret);
 		return ret;
 	}
 
Signature · 1 line
2.40.1
#2 lore raw

PATCH v2 2/4 gpio: cdev: use correct pointer accessors with SRCU

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

We never dereference the chip pointer in character device code so we can use the lighter rcu_access_pointer() helper. This also makes lockep happier as it no longer complains about suspicious rcu_dereference() usage.

Fixes d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
---
 drivers/gpio/gpiolib-cdev.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/gpio/gpiolib-cdev.c +12 -13
index 9323b357df43..85037fa4925e 100644
@@ -206,7 +206,7 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
 
 	guard(srcu)(&lh->gdev->srcu);
 
-	if (!rcu_dereference(lh->gdev->chip))
+	if (!rcu_access_pointer(lh->gdev->chip))
 		return -ENODEV;
 
 	switch (cmd) {
@@ -1521,7 +1521,7 @@ static long linereq_ioctl(struct file *file, unsigned int cmd,
 
 	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
 		return -ENODEV;
 
 	switch (cmd) {
@@ -1552,7 +1552,7 @@ static __poll_t linereq_poll(struct file *file,
 
 	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
 		return EPOLLHUP | EPOLLERR;
 
 	poll_wait(file, &lr->wait, wait);
@@ -1574,7 +1574,7 @@ static ssize_t linereq_read(struct file *file, char __user *buf,
 
 	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
 		return -ENODEV;
 
 	if (count < sizeof(le))
@@ -1875,7 +1875,7 @@ static __poll_t lineevent_poll(struct file *file,
 
 	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
 		return EPOLLHUP | EPOLLERR;
 
 	poll_wait(file, &le->wait, wait);
@@ -1913,7 +1913,7 @@ static ssize_t lineevent_read(struct file *file, char __user *buf,
 
 	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
 		return -ENODEV;
 
 	/*
@@ -1996,7 +1996,7 @@ static long lineevent_ioctl(struct file *file, unsigned int cmd,
 
 	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
 		return -ENODEV;
 
 	/*
@@ -2510,7 +2510,7 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	guard(srcu)(&gdev->srcu);
 
 	/* We fail any subsequent ioctl():s when the chip is gone */
-	if (!rcu_dereference(gdev->chip))
+	if (!rcu_access_pointer(gdev->chip))
 		return -ENODEV;
 
 	/* Fill in the struct and pass to userspace */
@@ -2595,7 +2595,7 @@ static __poll_t lineinfo_watch_poll(struct file *file,
 
 	guard(srcu)(&cdev->gdev->srcu);
 
-	if (!rcu_dereference(cdev->gdev->chip))
+	if (!rcu_access_pointer(cdev->gdev->chip))
 		return EPOLLHUP | EPOLLERR;
 
 	poll_wait(file, &cdev->wait, pollt);
@@ -2618,7 +2618,7 @@ static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
 
 	guard(srcu)(&cdev->gdev->srcu);
 
-	if (!rcu_dereference(cdev->gdev->chip))
+	if (!rcu_access_pointer(cdev->gdev->chip))
 		return -ENODEV;
 
 #ifndef CONFIG_GPIO_CDEV_V1
@@ -2696,7 +2696,7 @@ static int gpio_chrdev_open(struct inode *inode, struct file *file)
 	guard(srcu)(&gdev->srcu);
 
 	/* Fail on open if the backing gpiochip is gone */
-	if (!rcu_dereference(gdev->chip))
+	if (!rcu_access_pointer(gdev->chip))
 		return -ENODEV;
 
 	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
@@ -2796,8 +2796,7 @@ int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt)
 
 	guard(srcu)(&gdev->srcu);
 
-	gc = rcu_dereference(gdev->chip);
-	if (!gc)
+	if (!rcu_access_pointer(gdev->chip))
 		return -ENODEV;
 
 	chip_dbg(gc, "added GPIO chardev (%d:%d)\n", MAJOR(devt), gdev->id);
Signature · 1 line
2.40.1
#3 lore raw

Re: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

Quoted 120 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

We never dereference the chip pointer in character device code so we can use the lighter rcu_access_pointer() helper. This also makes lockep happier as it no longer complains about suspicious rcu_dereference() usage.

Fixes d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
---
  drivers/gpio/gpiolib-cdev.c | 25 ++++++++++++-------------
  1 file changed, 12 insertions(+), 13 deletions(-)
drivers/gpio/gpiolib-cdev.c +11 -11
index 9323b357df43..85037fa4925e 100644
@@ -206,7 +206,7 @@ static long linehandle_ioctl(struct file *file, unsigned int cmd,
 
  	guard(srcu)(&lh->gdev->srcu);
 
-	if (!rcu_dereference(lh->gdev->chip))
+	if (!rcu_access_pointer(lh->gdev->chip))
  		return -ENODEV;
 
  	switch (cmd) {
@@ -1521,7 +1521,7 @@ static long linereq_ioctl(struct file *file, unsigned int cmd,
 
  	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
  		return -ENODEV;
 
  	switch (cmd) {
@@ -1552,7 +1552,7 @@ static __poll_t linereq_poll(struct file *file,
 
  	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
  		return EPOLLHUP | EPOLLERR;
 
  	poll_wait(file, &lr->wait, wait);
@@ -1574,7 +1574,7 @@ static ssize_t linereq_read(struct file *file, char __user *buf,
 
  	guard(srcu)(&lr->gdev->srcu);
 
-	if (!rcu_dereference(lr->gdev->chip))
+	if (!rcu_access_pointer(lr->gdev->chip))
  		return -ENODEV;
 
  	if (count < sizeof(le))
@@ -1875,7 +1875,7 @@ static __poll_t lineevent_poll(struct file *file,
 
  	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
  		return EPOLLHUP | EPOLLERR;
 
  	poll_wait(file, &le->wait, wait);
@@ -1913,7 +1913,7 @@ static ssize_t lineevent_read(struct file *file, char __user *buf,
 
  	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
  		return -ENODEV;
 
  	/*
@@ -1996,7 +1996,7 @@ static long lineevent_ioctl(struct file *file, unsigned int cmd,
 
  	guard(srcu)(&le->gdev->srcu);
 
-	if (!rcu_dereference(le->gdev->chip))
+	if (!rcu_access_pointer(le->gdev->chip))
  		return -ENODEV;
 
  	/*
@@ -2510,7 +2510,7 @@ static long gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
  	guard(srcu)(&gdev->srcu);
 
  	/* We fail any subsequent ioctl():s when the chip is gone */
-	if (!rcu_dereference(gdev->chip))
+	if (!rcu_access_pointer(gdev->chip))
  		return -ENODEV;
 
  	/* Fill in the struct and pass to userspace */
@@ -2595,7 +2595,7 @@ static __poll_t lineinfo_watch_poll(struct file *file,
 
  	guard(srcu)(&cdev->gdev->srcu);
 
-	if (!rcu_dereference(cdev->gdev->chip))
+	if (!rcu_access_pointer(cdev->gdev->chip))
  		return EPOLLHUP | EPOLLERR;
 
  	poll_wait(file, &cdev->wait, pollt);
@@ -2618,7 +2618,7 @@ static ssize_t lineinfo_watch_read(struct file *file, char __user *buf,
 
  	guard(srcu)(&cdev->gdev->srcu);
 
-	if (!rcu_dereference(cdev->gdev->chip))
+	if (!rcu_access_pointer(cdev->gdev->chip))
  		return -ENODEV;
 
  #ifndef CONFIG_GPIO_CDEV_V1
@@ -2696,7 +2696,7 @@ static int gpio_chrdev_open(struct inode *inode, struct file *file)
  	guard(srcu)(&gdev->srcu);
 
  	/* Fail on open if the backing gpiochip is gone */
-	if (!rcu_dereference(gdev->chip))
+	if (!rcu_access_pointer(gdev->chip))
  		return -ENODEV;
 
  	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);

drivers/gpio/gpiolib-cdev.c int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt) · line 2802

Quoted 9 lines
drivers/gpio/gpiolib-cdev.c +1 -2
@@ -2796,8 +2796,7 @@ int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt)
 
  	guard(srcu)(&gdev->srcu);
 
-	gc = rcu_dereference(gdev->chip);
-	if (!gc)
+	if (!rcu_access_pointer(gdev->chip))
  		return -ENODEV;
 
  	chip_dbg(gc, "added GPIO chardev (%d:%d)\n", MAJOR(devt), gdev->id);

Here 'gc' is left uninitialized and nukes if GPIO DEBUGs are enabled. Here is an example (captured on today's linux-next):

8<--- cut here ---

Unable to handle kernel NULL pointer dereference at virtual address 
00000000 when read
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc4-next-20240216 #8096
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at gpiolib_cdev_register+0xd4/0x170
LR is at chainhash_table+0x784/0x20000
pc : [<c05dbe54>]    lr : [<c18bb74c>]    psr: 20000013

...
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4000404a  DAC: 00000051
Register r0 information: non-slab/vmalloc memory
Register r1 information: NULL pointer
Register r2 information: non-paged memory
Register r3 information: non-paged memory
Register r4 information: slab kmalloc-1k start c1e5f800 pointer offset 0 size 1024
Register r5 information: NULL pointer
Register r6 information: non-paged memory
Register r7 information: slab kmalloc-1k start c1e5f800 pointer offset 952 size 1024
Register r8 information: NULL pointer
Register r9 information: slab kmalloc-1k start c1e5f800 pointer offset 960 size 1024
Register r10 information: non-paged memory
Register r11 information: non-slab/vmalloc memory
Register r12 information: NULL pointer
Process swapper/0 (pid: 1, stack limit = 0x(ptrval))

Stack: (0xf082db90 to 0xf082e000)

...
 gpiolib_cdev_register from gpiochip_setup_dev+0x44/0xb0 gpiochip_setup_dev from gpiochip_add_data_with_key+0x9ac/0xaac gpiochip_add_data_with_key from devm_gpiochip_add_data_with_key+0x20/0x5c devm_gpiochip_add_data_with_key from samsung_pinctrl_probe+0x938/0xb18 samsung_pinctrl_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x400
 really_probe from __driver_probe_device+0x9c/0x1f4 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __device_attach_driver+0xa8/0x120 __device_attach_driver from bus_for_each_drv+0x80/0xcc bus_for_each_drv from __device_attach+0xac/0x1fc __device_attach from bus_probe_device+0x8c/0x90 bus_probe_device from device_add+0x5d4/0x7fc
 device_add from of_platform_device_create_pdata+0x94/0xc4 of_platform_device_create_pdata from of_platform_bus_create+0x1f8/0x4c0 of_platform_bus_create from of_platform_bus_create+0x268/0x4c0 of_platform_bus_create from of_platform_populate+0x80/0x110 of_platform_populate from of_platform_default_populate_init+0xd4/0xec of_platform_default_populate_init from do_one_initcall+0x64/0x2fc do_one_initcall from kernel_init_freeable+0x1c4/0x228 kernel_init_freeable from kernel_init+0x1c/0x12c
 kernel_init from ret_from_fork+0x14/0x28

Exception stack(0xf082dfb0 to 0xf082dff8)
...
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
---[ end Kernel panic - not syncing: Attempted to kill init! 

exitcode=0x0000000b ]---

Probably the easiest way to fix this issue is to replace chip_dbg with the following dev_dbg() call:

dev_dbg(&gdev->dev, "(%s): added GPIO chardev (%d:%d)\n", gdev->label, MAJOR(devt), gdev->id);

Best regards

Signature · 2 lines
Marek Szyprowski, PhD
Samsung R&D Institute Poland
#4 lore raw

Re: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

Quoted 1 line · Marek Szyprowski

[snip]

Quoted 64 lines

Here 'gc' is left uninitialized and nukes if GPIO DEBUGs are enabled. Here is an example (captured on today's linux-next):

8<--- cut here ---

Unable to handle kernel NULL pointer dereference at virtual address
00000000 when read
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc4-next-20240216 #8096
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at gpiolib_cdev_register+0xd4/0x170
LR is at chainhash_table+0x784/0x20000
pc : [<c05dbe54>]    lr : [<c18bb74c>]    psr: 20000013

...
Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 10c5387d Table: 4000404a DAC: 00000051
Register r0 information: non-slab/vmalloc memory
Register r1 information: NULL pointer
Register r2 information: non-paged memory
Register r3 information: non-paged memory
Register r4 information: slab kmalloc-1k start c1e5f800 pointer offset 0 size 1024
Register r5 information: NULL pointer
Register r6 information: non-paged memory
Register r7 information: slab kmalloc-1k start c1e5f800 pointer offset 952 size 1024
Register r8 information: NULL pointer
Register r9 information: slab kmalloc-1k start c1e5f800 pointer offset 960 size 1024
Register r10 information: non-paged memory
Register r11 information: non-slab/vmalloc memory
Register r12 information: NULL pointer
Process swapper/0 (pid: 1, stack limit = 0x(ptrval))

Stack: (0xf082db90 to 0xf082e000)

...
gpiolib_cdev_register from gpiochip_setup_dev+0x44/0xb0 gpiochip_setup_dev from gpiochip_add_data_with_key+0x9ac/0xaac gpiochip_add_data_with_key from devm_gpiochip_add_data_with_key+0x20/0x5c devm_gpiochip_add_data_with_key from samsung_pinctrl_probe+0x938/0xb18 samsung_pinctrl_probe from platform_probe+0x5c/0xb8 platform_probe from really_probe+0xe0/0x400
really_probe from __driver_probe_device+0x9c/0x1f4 __driver_probe_device from driver_probe_device+0x30/0xc0 driver_probe_device from __device_attach_driver+0xa8/0x120 __device_attach_driver from bus_for_each_drv+0x80/0xcc bus_for_each_drv from __device_attach+0xac/0x1fc __device_attach from bus_probe_device+0x8c/0x90 bus_probe_device from device_add+0x5d4/0x7fc
device_add from of_platform_device_create_pdata+0x94/0xc4 of_platform_device_create_pdata from of_platform_bus_create+0x1f8/0x4c0 of_platform_bus_create from of_platform_bus_create+0x268/0x4c0 of_platform_bus_create from of_platform_populate+0x80/0x110 of_platform_populate from of_platform_default_populate_init+0xd4/0xec of_platform_default_populate_init from do_one_initcall+0x64/0x2fc do_one_initcall from kernel_init_freeable+0x1c4/0x228 kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28

Exception stack(0xf082dfb0 to 0xf082dff8)
...
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
---[ end Kernel panic - not syncing: Attempted to kill init!
Quoted 9 lines

exitcode=0x0000000b ]---

Probably the easiest way to fix this issue is to replace chip_dbg with the following dev_dbg() call:

dev_dbg(&gdev->dev, "(%s): added GPIO chardev (%d:%d)\n", gdev->label, MAJOR(devt), gdev->id);

Thanks for the report. Surprisingly there are no warnings about that with GCC. The best way is to use srcu_dereference() here and keep the same log message. Patch is on the way.

Bart

#5 lore raw

Re: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

In reply to Bartosz Golaszewski
kernel test robot noticed "BUG:unable_to_handle_page_fault_for_address" on:

Hello,

kernel test robot noticed "BUG:unable_to_handle_page_fault_for_address" on:

commit: ef4aabaa372144b2bfa9c4ddc83255831cff9ebd ("[PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU")
url: https://github.com/intel-lab-lkp/linux/commits/Bartosz-Golaszewski/gpio-take-the-SRCU-read-lock-in-gpiod_hog/20240214-164752
base: https://git.kernel.org/cgit/linux/kernel/git/brgl/linux.git gpio/for-next
patch link: https://lore.kernel.org/all/[email protected]/
patch subject: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

in testcase: boot

compiler: clang-17
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G

(please refer to attached dmesg/kmsg for entire log/backtrace)

+----------------------------------------------------------------------------------+------------+------------+
|                                                                                  | 5c3cf44c4e | ef4aabaa37 |
+----------------------------------------------------------------------------------+------------+------------+
| BUG:unable_to_handle_page_fault_for_address                                      | 0          | 14         |
| Oops:#[##]                                                                       | 0          | 14         |
| EIP:gpiolib_cdev_register                                                        | 0          | 14         |
| Kernel_panic-not_syncing:Fatal_exception                                         | 0          | 14         |
+----------------------------------------------------------------------------------+------------+------------+

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-lkp/[email protected]

[   57.990853][    T1] gpiochip_find_base_unlocked: found new base at 512
[   57.991570][    T1]
[   57.991875][    T1] =============================
[   57.992480][    T1] WARNING: suspicious RCU usage
[   57.992993][    T1] 6.8.0-rc4-00057-gef4aabaa3721 #1 Tainted: G                TN
[   57.993787][    T1] -----------------------------
[   57.994289][    T1] drivers/gpio/gpiolib.h:205 suspicious rcu_dereference_check() usage!
[   57.995135][    T1]
[   57.995135][    T1] other info that might help us debug this:
[   57.995135][    T1]
[   57.996198][    T1]
[   57.996198][    T1] rcu_scheduler_active = 2, debug_locks = 1
[   57.997073][    T1] 2 locks held by swapper/1:
[ 57.997559][ T1] #0: ea878e8c (&dev->mutex){....}-{3:3}, at: __driver_attach (drivers/base/dd.c:1216) 
[ 57.998494][ T1] #1: eb682f3c (&gdev->srcu){.+.+}-{0:0}, at: srcu_lock_acquire (include/linux/srcu.h:115) 
[   57.999365][    T1]
[   57.999365][    T1] stack backtrace:
[   58.000005][    T1] CPU: 0 PID: 1 Comm: swapper Tainted: G                TN 6.8.0-rc4-00057-gef4aabaa3721 #1 10e84cefff2a9bf1626b34c75cc7b6c846de4a3a
[   58.001317][    T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[   58.002330][    T1] Call Trace:
[ 58.002690][ T1] dump_stack_lvl (lib/dump_stack.c:107) 
[ 58.003158][ T1] dump_stack (lib/dump_stack.c:113) 
[ 58.003631][ T1] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6714) 
[ 58.006180][ T1] gpiod_hog (drivers/gpio/gpiolib.h:?) 
[ 58.006632][ T1] of_gpiochip_add_hog (drivers/gpio/gpiolib-of.c:799) 
[ 58.007165][ T1] of_gpiochip_add (drivers/gpio/gpiolib-of.c:829 drivers/gpio/gpiolib-of.c:1144) 
[ 58.007663][ T1] gpiochip_add_data_with_key (drivers/gpio/gpiolib.c:1013) 
[ 58.008278][ T1] unittest_gpio_probe (drivers/of/unittest.c:1886) 
[ 58.008799][ T1] platform_probe (drivers/base/platform.c:1405) 
[ 58.009268][ T1] really_probe (drivers/base/dd.c:?) 
[ 58.009738][ T1] __driver_probe_device (drivers/base/dd.c:800) 
[ 58.010265][ T1] driver_probe_device (drivers/base/dd.c:830) 
[ 58.010776][ T1] __driver_attach (drivers/base/dd.c:1217) 
[ 58.011258][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.011734][ T1] bus_for_each_dev (drivers/base/bus.c:367) 
[ 58.012234][ T1] driver_attach (drivers/base/dd.c:1233) 
[ 58.012692][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.013168][ T1] bus_add_driver (drivers/base/bus.c:674) 
[ 58.013652][ T1] driver_register (drivers/base/driver.c:246) 
[ 58.014177][ T1] __platform_driver_register (drivers/base/platform.c:867) 
[ 58.014730][ T1] of_unittest_overlay_gpio (drivers/of/unittest.c:1969) 
[ 58.015285][ T1] of_unittest_overlay (drivers/of/unittest.c:3217) 
[ 58.015804][ T1] of_unittest (drivers/of/unittest.c:4129) 
[ 58.016264][ T1] do_one_initcall (init/main.c:1236) 
[ 58.016755][ T1] ? dt_alloc_memory (drivers/of/unittest.c:4080) 
[ 58.017247][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.017766][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.018269][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.018802][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.019348][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.019864][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.020382][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.020900][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.021400][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.021931][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.022471][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.022979][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.023496][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.024000][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.024526][ T1] ? local_clock (arch/x86/include/asm/preempt.h:84 kernel/sched/clock.c:316) 
[ 58.024982][ T1] ? irqtime_account_irq (kernel/sched/cputime.c:?) 
[ 58.025553][ T1] ? irqtime_account_delta (include/linux/seqlock.h:444 include/linux/seqlock.h:516 include/linux/u64_stats_sync.h:151 include/linux/u64_stats_sync.h:187 kernel/sched/cputime.c:46) 
[ 58.026091][ T1] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:63) 
[ 58.026594][ T1] ? irqentry_exit (kernel/entry/common.c:?) 
[ 58.027070][ T1] ? common_interrupt (arch/x86/kernel/irq.c:247) 
[ 58.027567][ T1] ? asm_common_interrupt (arch/x86/entry/entry_32.S:640) 
[ 58.028119][ T1] ? strlen (arch/x86/lib/string_32.c:175) 
[ 58.028540][ T1] ? next_arg (lib/cmdline.c:273) 
[ 58.028991][ T1] ? parse_args (kernel/params.c:153) 
[ 58.029467][ T1] do_initcall_level (init/main.c:1297) 
[ 58.029957][ T1] ? rest_init (init/main.c:1433) 
[ 58.030398][ T1] do_initcalls (init/main.c:1311) 
[ 58.030846][ T1] ? rest_init (init/main.c:1433) 
[ 58.031299][ T1] do_basic_setup (init/main.c:1334) 
[ 58.031769][ T1] kernel_init_freeable (init/main.c:1555) 
[ 58.032283][ T1] kernel_init (init/main.c:1443) 
[ 58.032732][ T1] ret_from_fork (arch/x86/kernel/process.c:153) 
[ 58.033192][ T1] ret_from_fork_asm (arch/x86/entry/entry_32.S:741) 
[ 58.033680][ T1] entry_INT80_32 (arch/x86/entry/entry_32.S:947) 
[   58.034672][    T1] gpio gpiochip0: Persistence not supported for GPIO 2
[   58.035366][    T1]
[   58.035669][    T1] =============================
[   58.036180][    T1] WARNING: suspicious RCU usage
[   58.036739][    T1] 6.8.0-rc4-00057-gef4aabaa3721 #1 Tainted: G                TN
[   58.037546][    T1] -----------------------------
[   58.038050][    T1] drivers/gpio/gpiolib.c:112 suspicious rcu_dereference_check() usage!
[   58.038893][    T1]
[   58.038893][    T1] other info that might help us debug this:
[   58.038893][    T1]
[   58.039950][    T1]
[   58.039950][    T1] rcu_scheduler_active = 2, debug_locks = 1
[   58.040837][    T1] 3 locks held by swapper/1:
[ 58.041318][ T1] #0: ea878e8c (&dev->mutex){....}-{3:3}, at: __driver_attach (drivers/base/dd.c:1216) 
[ 58.042234][ T1] #1: eb682f3c (&gdev->srcu){.+.+}-{0:0}, at: srcu_lock_acquire (include/linux/srcu.h:115) 
[ 58.043116][ T1] #2: eb6831dc (&desc->srcu){.+.+}-{0:0}, at: srcu_lock_acquire (include/linux/srcu.h:115) 
[   58.043992][    T1]
[   58.043992][    T1] stack backtrace:
[   58.044685][    T1] CPU: 0 PID: 1 Comm: swapper Tainted: G                TN 6.8.0-rc4-00057-gef4aabaa3721 #1 10e84cefff2a9bf1626b34c75cc7b6c846de4a3a
[   58.046006][    T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[   58.047050][    T1] Call Trace:
[ 58.047417][ T1] dump_stack_lvl (lib/dump_stack.c:107) 
[ 58.047896][ T1] dump_stack (lib/dump_stack.c:113) 
[ 58.048430][ T1] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6714) 
[ 58.048974][ T1] gpiod_get_label (drivers/gpio/gpiolib.c:?) 
[ 58.049450][ T1] gpiod_hog (drivers/gpio/gpiolib.c:4519) 
[ 58.049901][ T1] of_gpiochip_add_hog (drivers/gpio/gpiolib-of.c:799) 
[ 58.050433][ T1] of_gpiochip_add (drivers/gpio/gpiolib-of.c:829 drivers/gpio/gpiolib-of.c:1144) 
[ 58.050933][ T1] gpiochip_add_data_with_key (drivers/gpio/gpiolib.c:1013) 
[ 58.051503][ T1] unittest_gpio_probe (drivers/of/unittest.c:1886) 
[ 58.052013][ T1] platform_probe (drivers/base/platform.c:1405) 
[ 58.052484][ T1] really_probe (drivers/base/dd.c:?) 
[ 58.052953][ T1] __driver_probe_device (drivers/base/dd.c:800) 
[ 58.053480][ T1] driver_probe_device (drivers/base/dd.c:830) 
[ 58.054001][ T1] __driver_attach (drivers/base/dd.c:1217) 
[ 58.054482][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.054958][ T1] bus_for_each_dev (drivers/base/bus.c:367) 
[ 58.055451][ T1] driver_attach (drivers/base/dd.c:1233) 
[ 58.055908][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.056386][ T1] bus_add_driver (drivers/base/bus.c:674) 
[ 58.056871][ T1] driver_register (drivers/base/driver.c:246) 
[ 58.057348][ T1] __platform_driver_register (drivers/base/platform.c:867) 
[ 58.057900][ T1] of_unittest_overlay_gpio (drivers/of/unittest.c:1969) 
[ 58.058450][ T1] of_unittest_overlay (drivers/of/unittest.c:3217) 
[ 58.058973][ T1] of_unittest (drivers/of/unittest.c:4129) 
[ 58.059476][ T1] do_one_initcall (init/main.c:1236) 
[ 58.059967][ T1] ? dt_alloc_memory (drivers/of/unittest.c:4080) 
[ 58.060472][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.060994][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.061500][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.062037][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.062580][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.063084][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.063595][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.064122][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.064665][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.065201][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.065742][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.066248][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.066768][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.067271][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.067805][ T1] ? local_clock (arch/x86/include/asm/preempt.h:84 kernel/sched/clock.c:316) 
[ 58.068268][ T1] ? irqtime_account_irq (kernel/sched/cputime.c:?) 
[ 58.068795][ T1] ? irqtime_account_delta (include/linux/seqlock.h:444 include/linux/seqlock.h:516 include/linux/u64_stats_sync.h:151 include/linux/u64_stats_sync.h:187 kernel/sched/cputime.c:46) 
[ 58.069333][ T1] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:63) 
[ 58.069836][ T1] ? irqentry_exit (kernel/entry/common.c:?) 
[ 58.070341][ T1] ? common_interrupt (arch/x86/kernel/irq.c:247) 
[ 58.070842][ T1] ? asm_common_interrupt (arch/x86/entry/entry_32.S:640) 
[ 58.071388][ T1] ? strlen (arch/x86/lib/string_32.c:175) 
[ 58.071812][ T1] ? next_arg (lib/cmdline.c:273) 
[ 58.072278][ T1] ? parse_args (kernel/params.c:153) 
[ 58.072756][ T1] do_initcall_level (init/main.c:1297) 
[ 58.073247][ T1] ? rest_init (init/main.c:1433) 
[ 58.073693][ T1] do_initcalls (init/main.c:1311) 
[ 58.074142][ T1] ? rest_init (init/main.c:1433) 
[ 58.074585][ T1] do_basic_setup (init/main.c:1334) 
[ 58.075052][ T1] kernel_init_freeable (init/main.c:1555) 
[ 58.075573][ T1] kernel_init (init/main.c:1443) 
[ 58.076029][ T1] ret_from_fork (arch/x86/kernel/process.c:153) 
[ 58.076498][ T1] ret_from_fork_asm (arch/x86/entry/entry_32.S:741) 
[ 58.076989][ T1] entry_INT80_32 (arch/x86/entry/entry_32.S:947) 
[   58.077544][    T1] gpio-514 (line-B-input): hogged as input
[   58.078433][    T1] BUG: unable to handle page fault for address: ffffffff
[   58.079116][    T1] #PF: supervisor read access in kernel mode
[   58.079703][    T1] #PF: error_code(0x0000) - not-present page
[   58.080316][    T1] *pde = 02e00067 *pte = 00000000
[   58.080829][    T1] Oops: 0000 [#1]
[   58.081210][    T1] CPU: 0 PID: 1 Comm: swapper Tainted: G                TN 6.8.0-rc4-00057-gef4aabaa3721 #1 10e84cefff2a9bf1626b34c75cc7b6c846de4a3a
[   58.082492][    T1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 58.083471][ T1] EIP: gpiolib_cdev_register (drivers/gpio/gpiolib-cdev.c:2802) 
[ 58.084015][ T1] Code: ec e8 7a 10 00 00 89 f8 89 da e8 c1 c8 a5 ff 89 f0 83 c4 0c 5e 5f 5b 5d 31 c9 31 d2 c3 8b 45 f0 c1 e8 14 ff b7 d8 01 00 00 50 <ff> 35 ff ff ff ff 68 7c de 5c c2 ff 35 03 00 00 00 68 3d ad 57 c2
All code
========
   0:	ec                   	in     (%dx),%al
   1:	e8 7a 10 00 00       	call   0x1080
   6:	89 f8                	mov    %edi,%eax
   8:	89 da                	mov    %ebx,%edx
   a:	e8 c1 c8 a5 ff       	call   0xffffffffffa5c8d0
   f:	89 f0                	mov    %esi,%eax
  11:	83 c4 0c             	add    $0xc,%esp
  14:	5e                   	pop    %rsi
  15:	5f                   	pop    %rdi
  16:	5b                   	pop    %rbx
  17:	5d                   	pop    %rbp
  18:	31 c9                	xor    %ecx,%ecx
  1a:	31 d2                	xor    %edx,%edx
  1c:	c3                   	ret
  1d:	8b 45 f0             	mov    -0x10(%rbp),%eax
  20:	c1 e8 14             	shr    $0x14,%eax
  23:	ff b7 d8 01 00 00    	push   0x1d8(%rdi)
  29:	50                   	push   %rax
  2a:*	ff 35 ff ff ff ff    	push   -0x1(%rip)        # 0x2f		<-- trapping instruction
  30:	68 7c de 5c c2       	push   $0xffffffffc25cde7c
  35:	ff 35 03 00 00 00    	push   0x3(%rip)        # 0x3e
  3b:	68 3d ad 57 c2       	push   $0xffffffffc257ad3d

Code starting with the faulting instruction
===========================================

   0:	ff 35 ff ff ff ff    	push   -0x1(%rip)        # 0x5
   6:	68 7c de 5c c2       	push   $0xffffffffc25cde7c
   b:	ff 35 03 00 00 00    	push   0x3(%rip)        # 0x14
  11:	68 3d ad 57 c2       	push   $0xffffffffc257ad3d
[   58.085813][    T1] EAX: 000000fe EBX: 00000000 ECX: 00000000 EDX: 00000000
[   58.086476][    T1] ESI: ffffffed EDI: eb682c00 EBP: c3e1baec ESP: c3e1bacc
[   58.087140][    T1] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010202
[   58.087927][    T1] CR0: 80050033 CR2: ffffffff CR3: 02dfd000 CR4: 000406d0
[   58.088601][    T1] Call Trace:
[ 58.088950][ T1] ? __die_body (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420) 
[ 58.089388][ T1] ? __die (arch/x86/kernel/dumpstack.c:434) 
[ 58.089790][ T1] ? page_fault_oops (arch/x86/mm/fault.c:703) 
[ 58.090279][ T1] ? kernelmode_fixup_or_oops (arch/x86/mm/fault.c:761) 
[ 58.090815][ T1] ? __bad_area_nosemaphore (arch/x86/mm/fault.c:817) 
[ 58.091344][ T1] ? bad_area_nosemaphore (arch/x86/mm/fault.c:866) 
[ 58.091846][ T1] ? do_kern_addr_fault (arch/x86/mm/fault.c:1226) 
[ 58.092347][ T1] ? exc_page_fault (arch/x86/mm/fault.c:?) 
[ 58.092822][ T1] ? pvclock_clocksource_read_nowd (arch/x86/mm/fault.c:1520) 
[ 58.093407][ T1] ? handle_exception (arch/x86/entry/entry_32.S:1049) 
[ 58.093964][ T1] ? pvclock_clocksource_read_nowd (arch/x86/mm/fault.c:1520) 
[ 58.094556][ T1] ? gpiolib_cdev_register (drivers/gpio/gpiolib-cdev.c:2802) 
[ 58.095076][ T1] ? pvclock_clocksource_read_nowd (arch/x86/mm/fault.c:1520) 
[ 58.095666][ T1] ? gpiolib_cdev_register (drivers/gpio/gpiolib-cdev.c:2802) 
[ 58.096187][ T1] gpiochip_setup_dev (drivers/gpio/gpiolib.c:740) 
[ 58.096665][ T1] gpiochip_add_data_with_key (drivers/gpio/gpiolib.c:1047) 
[ 58.099219][ T1] unittest_gpio_probe (drivers/of/unittest.c:1886) 
[ 58.099744][ T1] platform_probe (drivers/base/platform.c:1405) 
[ 58.100210][ T1] really_probe (drivers/base/dd.c:?) 
[ 58.100662][ T1] __driver_probe_device (drivers/base/dd.c:800) 
[ 58.101172][ T1] driver_probe_device (drivers/base/dd.c:830) 
[ 58.101667][ T1] __driver_attach (drivers/base/dd.c:1217) 
[ 58.102131][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.102587][ T1] bus_for_each_dev (drivers/base/bus.c:367) 
[ 58.103061][ T1] driver_attach (drivers/base/dd.c:1233) 
[ 58.103505][ T1] ? driver_attach (drivers/base/dd.c:1157) 
[ 58.103962][ T1] bus_add_driver (drivers/base/bus.c:674) 
[ 58.104431][ T1] driver_register (drivers/base/driver.c:246) 
[ 58.104902][ T1] __platform_driver_register (drivers/base/platform.c:867) 
[ 58.105443][ T1] of_unittest_overlay_gpio (drivers/of/unittest.c:1969) 
[ 58.105976][ T1] of_unittest_overlay (drivers/of/unittest.c:3217) 
[ 58.106475][ T1] of_unittest (drivers/of/unittest.c:4129) 
[ 58.106911][ T1] do_one_initcall (init/main.c:1236) 
[ 58.107384][ T1] ? dt_alloc_memory (drivers/of/unittest.c:4080) 
[ 58.107860][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.108367][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.108853][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.109364][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.109889][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.110377][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.110926][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.111428][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.111917][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.112441][ T1] ? rcu_read_lock_any_held (kernel/rcu/update.c:386) 
[ 58.112964][ T1] ? __lock_acquire (kernel/locking/lockdep.c:3762) 
[ 58.113450][ T1] ? kvm_sched_clock_read (arch/x86/kernel/kvmclock.c:91) 
[ 58.113964][ T1] ? sched_clock_noinstr (arch/x86/kernel/tsc.c:266) 
[ 58.114454][ T1] ? local_clock_noinstr (kernel/sched/clock.c:269 kernel/sched/clock.c:306) 
[ 58.114963][ T1] ? local_clock (arch/x86/include/asm/preempt.h:84 kernel/sched/clock.c:316) 
[ 58.115399][ T1] ? irqtime_account_irq (kernel/sched/cputime.c:?) 
[ 58.115903][ T1] ? irqtime_account_delta (include/linux/seqlock.h:444 include/linux/seqlock.h:516 include/linux/u64_stats_sync.h:151 include/linux/u64_stats_sync.h:187 kernel/sched/cputime.c:46) 
[ 58.116430][ T1] ? trace_hardirqs_on (kernel/trace/trace_preemptirq.c:63) 
[ 58.116929][ T1] ? irqentry_exit (kernel/entry/common.c:?) 
[ 58.117391][ T1] ? common_interrupt (arch/x86/kernel/irq.c:247) 
[ 58.117869][ T1] ? asm_common_interrupt (arch/x86/entry/entry_32.S:640) 
[ 58.118390][ T1] ? strlen (arch/x86/lib/string_32.c:175) 
[ 58.118799][ T1] ? next_arg (lib/cmdline.c:273) 
[ 58.119238][ T1] ? parse_args (kernel/params.c:153) 
[ 58.119689][ T1] do_initcall_level (init/main.c:1297) 
[ 58.120167][ T1] ? rest_init (init/main.c:1433) 
[ 58.120596][ T1] do_initcalls (init/main.c:1311) 
[ 58.121033][ T1] ? rest_init (init/main.c:1433) 
[ 58.121460][ T1] do_basic_setup (init/main.c:1334) 
[ 58.121908][ T1] kernel_init_freeable (init/main.c:1555) 
[ 58.122401][ T1] kernel_init (init/main.c:1443) 
[ 58.122873][ T1] ret_from_fork (arch/x86/kernel/process.c:153) 
[ 58.123330][ T1] ret_from_fork_asm (arch/x86/entry/entry_32.S:741) 
[ 58.123804][ T1] entry_INT80_32 (arch/x86/entry/entry_32.S:947) 
[   58.124281][    T1] Modules linked in:
[   58.124686][    T1] CR2: 00000000ffffffff
[   58.125108][    T1] ---[ end trace 0000000000000000 ]---
[ 58.125635][ T1] EIP: gpiolib_cdev_register (drivers/gpio/gpiolib-cdev.c:2802) 
[ 58.126171][ T1] Code: ec e8 7a 10 00 00 89 f8 89 da e8 c1 c8 a5 ff 89 f0 83 c4 0c 5e 5f 5b 5d 31 c9 31 d2 c3 8b 45 f0 c1 e8 14 ff b7 d8 01 00 00 50 <ff> 35 ff ff ff ff 68 7c de 5c c2 ff 35 03 00 00 00 68 3d ad 57 c2
All code
========
   0:	ec                   	in     (%dx),%al
   1:	e8 7a 10 00 00       	call   0x1080
   6:	89 f8                	mov    %edi,%eax
   8:	89 da                	mov    %ebx,%edx
   a:	e8 c1 c8 a5 ff       	call   0xffffffffffa5c8d0
   f:	89 f0                	mov    %esi,%eax
  11:	83 c4 0c             	add    $0xc,%esp
  14:	5e                   	pop    %rsi
  15:	5f                   	pop    %rdi
  16:	5b                   	pop    %rbx
  17:	5d                   	pop    %rbp
  18:	31 c9                	xor    %ecx,%ecx
  1a:	31 d2                	xor    %edx,%edx
  1c:	c3                   	ret
  1d:	8b 45 f0             	mov    -0x10(%rbp),%eax
  20:	c1 e8 14             	shr    $0x14,%eax
  23:	ff b7 d8 01 00 00    	push   0x1d8(%rdi)
  29:	50                   	push   %rax
  2a:*	ff 35 ff ff ff ff    	push   -0x1(%rip)        # 0x2f		<-- trapping instruction
  30:	68 7c de 5c c2       	push   $0xffffffffc25cde7c
  35:	ff 35 03 00 00 00    	push   0x3(%rip)        # 0x3e
  3b:	68 3d ad 57 c2       	push   $0xffffffffc257ad3d

Code starting with the faulting instruction
===========================================

   0:	ff 35 ff ff ff ff    	push   -0x1(%rip)        # 0x5
   6:	68 7c de 5c c2       	push   $0xffffffffc25cde7c
   b:	ff 35 03 00 00 00    	push   0x3(%rip)        # 0x14
  11:	68 3d ad 57 c2       	push   $0xffffffffc257ad3d

The kernel config and materials to reproduce are available at:
https://download.01.org/0day-ci/archive/20240226/[email protected]

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#6 lore raw

Re: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

Quoted 13 lines · kernel test robot

Hello,

kernel test robot noticed "BUG:unable_to_handle_page_fault_for_address" on:

commit: ef4aabaa372144b2bfa9c4ddc83255831cff9ebd ("[PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU")
url: https://github.com/intel-lab-lkp/linux/commits/Bartosz-Golaszewski/gpio-take-the-SRCU-read-lock-in-gpiod_hog/20240214-164752
base: https://git.kernel.org/cgit/linux/kernel/git/brgl/linux.git gpio/for-next
patch link: https://lore.kernel.org/all/[email protected]/
patch subject: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU

Quoted 7 lines

in testcase: boot

compiler: clang-17
test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 16G

(please refer to attached dmesg/kmsg for entire log/backtrace)

Please disregard this one, the issue is fixed in patch 3/4 which is already in next.

Bart

#7 lore raw

PATCH v2 3/4 gpio: use srcu_dereference() with SRCU-protected pointers

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Lockdep with CONFIG_PROVE_RCU enabled reports false positives about suspicious rcu_dereference() usage. Let's silence it by using srcu_dereference() which is the correct helper with SRCU.

Fixes d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
---
 drivers/gpio/gpiolib-sysfs.c |  5 +++--
 drivers/gpio/gpiolib.c       | 16 ++++++++--------
 drivers/gpio/gpiolib.h       |  3 ++-
 3 files changed, 13 insertions(+), 11 deletions(-)
drivers/gpio/gpiolib-sysfs.c +3 -2
index 6285fa5afbb1..71ba2a774197 100644
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/srcu.h>
 #include <linux/sysfs.h>
 #include <linux/types.h>
 
@@ -756,7 +757,7 @@ int gpiochip_sysfs_register(struct gpio_device *gdev)
 
 	guard(srcu)(&gdev->srcu);
 
-	chip = rcu_dereference(gdev->chip);
+	chip = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (!chip)
 		return -ENODEV;
 
@@ -800,7 +801,7 @@ void gpiochip_sysfs_unregister(struct gpio_device *gdev)
 
 	guard(srcu)(&gdev->srcu);
 
-	chip = rcu_dereference(gdev->chip);
+	chip = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (chip)
 		return;
 
drivers/gpio/gpiolib.c +8 -8
index 439d32d5aa38..b095f475805f 100644
@@ -109,7 +109,7 @@ const char *gpiod_get_label(struct gpio_desc *desc)
 		return "interrupt";
 
 	return test_bit(FLAG_REQUESTED, &flags) ?
-			rcu_dereference(desc->label) : NULL;
+			srcu_dereference(desc->label, &desc->srcu) : NULL;
 }
 
 static int desc_set_label(struct gpio_desc *desc, const char *label)
@@ -447,7 +447,7 @@ static struct gpio_desc *gpio_name_to_desc(const char * const name)
 				 srcu_read_lock_held(&gpio_devices_srcu)) {
 		guard(srcu)(&gdev->srcu);
 
-		gc = rcu_dereference(gdev->chip);
+		gc = srcu_dereference(gdev->chip, &gdev->srcu);
 		if (!gc)
 			continue;
 
@@ -1190,7 +1190,7 @@ struct gpio_device *gpio_device_find(void *data,
 				 srcu_read_lock_held(&gpio_devices_srcu)) {
 		guard(srcu)(&gdev->srcu);
 
-		gc = rcu_dereference(gdev->chip);
+		gc = srcu_dereference(gdev->chip, &gdev->srcu);
 
 		if (gc && match(gc, data))
 			return gpio_device_get(gdev);
@@ -2978,7 +2978,7 @@ static int gpiod_get_raw_value_commit(const struct gpio_desc *desc)
 
 	guard(srcu)(&gdev->srcu);
 
-	gc = rcu_dereference(gdev->chip);
+	gc = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (!gc)
 		return -ENODEV;
 
@@ -3012,7 +3012,7 @@ static bool gpio_device_chip_cmp(struct gpio_device *gdev, struct gpio_chip *gc)
 {
 	guard(srcu)(&gdev->srcu);
 
-	return gc == rcu_dereference(gdev->chip);
+	return gc == srcu_dereference(gdev->chip, &gdev->srcu);
 }
 
 int gpiod_get_array_value_complex(bool raw, bool can_sleep,
@@ -3593,7 +3593,7 @@ int gpiod_to_irq(const struct gpio_desc *desc)
 	gdev = desc->gdev;
 	/* FIXME Cannot use gpio_chip_guard due to const desc. */
 	guard(srcu)(&gdev->srcu);
-	gc = rcu_dereference(gdev->chip);
+	gc = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (!gc)
 		return -ENODEV;
 
@@ -4787,7 +4787,7 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 
 	guard(srcu)(&gdev->srcu);
 
-	gc = rcu_dereference(gdev->chip);
+	gc = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (!gc) {
 		seq_puts(s, "Underlying GPIO chip is gone\n");
 		return;
@@ -4872,7 +4872,7 @@ static int gpiolib_seq_show(struct seq_file *s, void *v)
 
 	guard(srcu)(&gdev->srcu);
 
-	gc = rcu_dereference(gdev->chip);
+	gc = srcu_dereference(gdev->chip, &gdev->srcu);
 	if (!gc) {
 		seq_printf(s, "%s%s: (dangling chip)",
 			   priv->newline ? "\n" : "",
drivers/gpio/gpiolib.h +2 -1
index 07443d26cbca..ada36aa0f81a 100644
@@ -202,7 +202,8 @@ DEFINE_CLASS(gpio_chip_guard,
 
 		_guard.gdev = desc->gdev;
 		_guard.idx = srcu_read_lock(&_guard.gdev->srcu);
-		_guard.gc = rcu_dereference(_guard.gdev->chip);
+		_guard.gc = srcu_dereference(_guard.gdev->chip,
+					     &_guard.gdev->srcu);
 
 		_guard;
 	     }),
Signature · 1 line
2.40.1
#8 lore raw

PATCH v2 4/4 gpio: don't let lockdep complain about inherently dangerous RCU usage

In reply to Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

There are two legacy, deprecated functions - gpiod_to_chip() and gpio_device_get_chip() - that still have users in tree. They return the address of the SRCU-protected chip outside of the read-only critical sections. They are inherently dangerous and the users should convert to safer alternatives. Let's explicitly silence lockdep warnings by using rcu_dereference_check(ptr, 1). While at it: reuse gpio_device_get_chip() in gpiod_to_chip().

Fixes d83cee3d2bb1 ("gpio: protect the pointer to gpio_chip in gpio_device with SRCU")
---
 drivers/gpio/gpiolib.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpio/gpiolib.c +3 -2
index b095f475805f..02be0ba1a402 100644
@@ -221,7 +221,8 @@ struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
 {
 	if (!desc)
 		return NULL;
-	return rcu_dereference(desc->gdev->chip);
+
+	return gpio_device_get_chip(desc->gdev);
 }
 EXPORT_SYMBOL_GPL(gpiod_to_chip);
 
@@ -291,7 +292,7 @@ EXPORT_SYMBOL(gpio_device_get_label);
  */
 struct gpio_chip *gpio_device_get_chip(struct gpio_device *gdev)
 {
-	return rcu_dereference(gdev->chip);
+	return rcu_dereference_check(gdev->chip, 1);
 }
 EXPORT_SYMBOL_GPL(gpio_device_get_chip);
 
Signature · 1 line
2.40.1
#9 lore raw
In reply to Bartosz Golaszewski
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

Same comment here, can we simply redo this work so we won't have tons of fixes on top of the nice RCU rework?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#10 lore raw
Quoted 10 lines · Andy Shevchenko
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

Same comment here, can we simply redo this work so we won't have tons of fixes on top of the nice RCU rework?

The rework is clearly a new development - not meant for backporting. I don't see any benefit from rebasing. These are normal fixes for a big rework.

Bart

#11 lore raw
In reply to Bartosz Golaszewski
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

This doesn't fix the issue I reported yesterday when applied on top of today's next:

https://lava.sirena.org.uk/scheduler/job/585469

[    1.995518] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078

...

[    2.176162] Call trace:
[    2.178610]  check_init_srcu_struct+0x1c/0xa0
[    2.182974]  synchronize_srcu+0x1c/0x100
[    2.186904]  gpiod_request_commit+0xec/0x1e0
[    2.191183]  gpiochip_request_own_desc+0x58/0x124
[    2.195894]  gpiod_hog+0x114/0x1b4
[    2.199305]  of_gpiochip_add+0x208/0x370
[    2.203232]  gpiochip_add_data_with_key+0x71c/0xf10
[    2.208117]  devm_gpiochip_add_data_with_key+0x30/0x7c
[    2.213261]  mxc_gpio_probe+0x208/0x4b0
#12 lore raw
Quoted 16 lines · Mark Brown
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

This doesn't fix the issue I reported yesterday when applied on top of today's next:

   https://lava.sirena.org.uk/scheduler/job/585469
[    1.995518] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078

...

Quoted 10 lines
[    2.176162] Call trace:
[    2.178610]  check_init_srcu_struct+0x1c/0xa0
[    2.182974]  synchronize_srcu+0x1c/0x100
[    2.186904]  gpiod_request_commit+0xec/0x1e0
[    2.191183]  gpiochip_request_own_desc+0x58/0x124
[    2.195894]  gpiod_hog+0x114/0x1b4
[    2.199305]  of_gpiochip_add+0x208/0x370
[    2.203232]  gpiochip_add_data_with_key+0x71c/0xf10
[    2.208117]  devm_gpiochip_add_data_with_key+0x30/0x7c
[    2.213261]  mxc_gpio_probe+0x208/0x4b0

No, the fix for this issue is in my tree as commit ba5c5effe02c ("gpio: initialize descriptor SRCU structure before adding OF-based chips"). These are mostly fixes for lockdep warnings.

Bart

Acked-by on the v2 series
#13 lore raw
In reply to Bartosz Golaszewski
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

For 1/4-3/4:

For 4/4, you are playing with fire, but I will assume that you know what you are doing. ;-)

Thanx, Paul

Quoted 23 lines

v1 -> v2:
- use srcu_dereference() instead of rcu_dereference_protected() as advised by Paul
- add a patch using rcu_dereference_check(..., 1) in deprecated interfaces that return the address of the RCU-protected chip structure to external users (who shouldn't use it anyway but well...)
- pick up review tags for patches 1/4 and 2/4

Bartosz Golaszewski (4):
gpio: take the SRCU read lock in gpiod_hog()
gpio: cdev: use correct pointer accessors with SRCU
gpio: use srcu_dereference() with SRCU-protected pointers
gpio: don't let lockdep complain about inherently dangerous RCU usage

 drivers/gpio/gpiolib-cdev.c  | 25 ++++++++++++-------------
 drivers/gpio/gpiolib-sysfs.c |  5 +++--
 drivers/gpio/gpiolib.c       | 32 ++++++++++++++++++--------------
 drivers/gpio/gpiolib.h       |  3 ++-
 4 files changed, 35 insertions(+), 30 deletions(-)
Signature · 1 line
2.40.1
#14 lore raw
Quoted 7 lines · Paul E. McKenney
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

Quoted 7 lines

For 1/4-3/4:

For 4/4, you are playing with fire, but I will assume that you know what you are doing. ;-)

Up until this rework, this gdev->chip pointer could go from under any user at any point. Now we have this gpio_device wrapper that provides an entry point to using the chip safely while protected by the SRCU read lock. Anyone who is still accessing gpio_chip directly (and not being the GPIO provider themselves) is asking for trouble. There's however no point in spamming lockdep splats in this case. I may end up adding a warning to these routines.

Unfortunately, it's hard to fix 15 years of technical debt. :(

Thanks for the Acks.
Bartosz

[snip]

#15 lore raw
Quoted 23 lines · Bartosz Golaszewski
Quoted 7 lines · Paul E. McKenney
Quoted 4 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

Quoted 6 lines

For 1/4-3/4:

For 4/4, you are playing with fire, but I will assume that you know what you are doing. ;-)

Up until this rework, this gdev->chip pointer could go from under any user at any point. Now we have this gpio_device wrapper that provides an entry point to using the chip safely while protected by the SRCU read lock. Anyone who is still accessing gpio_chip directly (and not being the GPIO provider themselves) is asking for trouble. There's however no point in spamming lockdep splats in this case. I may end up adding a warning to these routines.

Quoted 1 line

Unfortunately, it's hard to fix 15 years of technical debt. :(

Indeed, life is sometimes hard!

Thanx, Paul

Quoted 4 lines

Thanks for the Acks.
Bartosz

[snip]

#16 lore raw
In reply to Bartosz Golaszewski
Quoted 1 line · Bartosz Golaszewski

Unfortunately, it's hard to fix 15 years of technical debt. :(

If it's any consolation I didn't create this one technical debt on purpose.

The actual mistake creating it goes something like: /dev/gpiochipN files are nice and we can clean up after a file handle is closed or terminated, I wonder why people insist on using sysfs for so many things.

All the file semantics of handles going away by being used etc, that's why sysfs is good. I was too inexperienced to understand that, or I would have paid more attention...

Yet I think we ended up in a reasonable place.

Yours,
Linus Walleij

#17 lore raw
In reply to Bartosz Golaszewski
Quoted 20 lines · Bartosz Golaszewski

From: Bartosz Golaszewski <[email protected]>

Here are four fixes to some bugs in recent SRCU changes. The first one fixes an actual race condition. The other three just make lockdep happy.

v1 -> v2:
- use srcu_dereference() instead of rcu_dereference_protected() as advised by Paul
- add a patch using rcu_dereference_check(..., 1) in deprecated interfaces that return the address of the RCU-protected chip structure to external users (who shouldn't use it anyway but well...)
- pick up review tags for patches 1/4 and 2/4

Bartosz Golaszewski (4):
gpio: take the SRCU read lock in gpiod_hog()
gpio: cdev: use correct pointer accessors with SRCU
gpio: use srcu_dereference() with SRCU-protected pointers
gpio: don't let lockdep complain about inherently dangerous RCU usage

Quoted 9 lines
 drivers/gpio/gpiolib-cdev.c  | 25 ++++++++++++-------------
 drivers/gpio/gpiolib-sysfs.c |  5 +++--
 drivers/gpio/gpiolib.c       | 32 ++++++++++++++++++--------------
 drivers/gpio/gpiolib.h       |  3 ++-
 4 files changed, 35 insertions(+), 30 deletions(-)

--
2.40.1

Series queued.

Bart