arm64: dts: qcom: msm8916/39-samsung-a2015: Add PMIC and charger
v2 cover arm64: dts: qcom: msm8916/39-samsung-a2015: Add PMIC and charger
The phones listed below have Richtek RT5033 PMIC and charger. Add them to the device trees.
- Samsung Galaxy A3/A5/A7 2015
- Samsung Galaxy E5/E7
- Samsung Galaxy Grand Max
---
v2: Split the connector into another patch
PATCH v2 1/2 arm64: dts: qcom: msm8916/39-samsung-a2015: Add connector for MUIC
Add subnode usb_con: extcon for SM5502 / SM5504 MUIC, which will be used for RT5033 charger.
--- arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi | 6 ++++++ arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi | 6 ++++++ arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts | 6 ++++++ 3 files changed, 18 insertions(+)
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +6 -0
@@ -128,6 +128,12 @@ muic: extcon@25 { pinctrl-names = "default"; pinctrl-0 = <&muic_int_default>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; };
arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +6 -0
@@ -23,6 +23,12 @@ muic: extcon@14 { pinctrl-names = "default"; pinctrl-0 = <&muic_int_default>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; };
arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +6 -0
@@ -286,6 +286,12 @@ muic: extcon@25 { pinctrl-0 = <&muic_int_default>; pinctrl-names = "default"; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; };
Signature · 1 line
2.39.2
Re: [PATCH v2 1/2] arm64: dts: qcom: msm8916/39-samsung-a2015: Add connector for MUIC
Quoted 5 lines · Raymond Hackley
Add subnode
usb_con: extcon for SM5502 / SM5504 MUIC, which will be used for RT5033 charger.Signed-off-by Raymond Hackley <[email protected]>---
I think splitting this patchset into "add everything at once for device X" would be saner and easier to e.g. revert when bisecting or so
Konrad
PATCH v2 2/2 arm64: dts: qcom: msm8916/39-samsung-a2015: Add PMIC and charger
In reply to Raymond HackleyThe phones listed below have Richtek RT5033 PMIC and charger. Add them to the device trees.
- Samsung Galaxy A3/A5/A7 2015
- Samsung Galaxy E5/E7
- Samsung Galaxy Grand Max
--- .../qcom/msm8916-samsung-a2015-common.dtsi | 53 +++++++++++++++++- .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-e5.dts | 6 ++ .../boot/dts/qcom/msm8916-samsung-e7.dts | 7 +++ .../dts/qcom/msm8916-samsung-grandmax.dts | 6 ++ .../boot/dts/qcom/msm8939-samsung-a7.dts | 56 ++++++++++++++++++- 7 files changed, 138 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +52 -1
@@ -28,6 +28,12 @@ tz-apps@85500000 { }; }; + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + precharge-upper-limit-microvolt = <3500000>; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>;
@@ -245,7 +251,7 @@ magnetometer@12 { &blsp_i2c4 { status = "okay"; - battery@35 { + fuel-gauge@35 { compatible = "richtek,rt5033-battery"; reg = <0x35>; interrupt-parent = <&tlmm>;
@@ -253,6 +259,44 @@ battery@35 { pinctrl-names = "default"; pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&charger>; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&pmic_int_default>; + pinctrl-names = "default"; + + regulators { + rt5033_reg_safe_ldo: SAFE_LDO { + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + + /* + * Needed for camera, but not used yet. + * Define empty nodes to allow disabling the unused + * regulators. + */ + LDO {}; + BUCK {}; + }; + + charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; }; };
@@ -476,6 +520,13 @@ nfc_i2c_default: nfc-i2c-default-state { bias-disable; }; + pmic_int_default: pmic-int-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio";
arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +6 -0
@@ -55,6 +55,12 @@ &accelerometer { "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay";
arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +6 -0
@@ -29,6 +29,12 @@ &accelerometer { "0", "0", "1"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay";
arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dts +6 -0
@@ -23,6 +23,12 @@ / { chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + &blsp_i2c5 { status = "okay";
arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dts +7 -0
@@ -23,6 +23,13 @@ / { chassis-type = "handset"; }; +&battery { + charge-term-current-microamp = <200000>; + constant-charge-current-max-microamp = <1500000>; + constant-charge-voltage-max-microvolt = <4350000>; +}; + + &pm8916_l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>;
arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +6 -0
@@ -41,6 +41,12 @@ led-keyled { }; }; +&battery { + charge-term-current-microamp = <150000>; + constant-charge-current-max-microamp = <1000000>; + constant-charge-voltage-max-microvolt = <4400000>; +}; + ®_motor_vdd { gpio = <&tlmm 72 GPIO_ACTIVE_HIGH>; };
arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +55 -1
86 lines not on this page · raw message
Signature · 1 line
2.39.2