docs-translations-damon-usage-update-for-monitor_on-renaming.patch removed from -mm tree
The quilt patch titled
Subject: Docs/translations/damon/usage: update for monitor_on renaming
has been removed from the -mm tree. Its filename was
docs-translations-damon-usage-update-for-monitor_on-renaming.patch
This patch was dropped because it was merged into the mm-stable branch of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: SeongJae Park <[email protected]>
Subject: Docs/translations/damon/usage: update for monitor_on renaming
Date: Mon, 29 Jan 2024 17:35:48 -0800
Update DAMON debugfs interface sections on the translated usage documents to reflect the fact that 'monitor_on' file has renamed to 'monitor_on_DEPRECATED'.
---
Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst | 20 +++++----- Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst | 20 +++++----- 2 files changed, 20 insertions(+), 20 deletions(-)
Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst renamed from Documentation/translations/zh_CN/admin-guide/mm/damon/usage.rst~docs-translations-damon-usage-update-for-monitor_on-renaming +10 -10
@@ -344,7 +344,7 @@ debugfs接口 :ref:`sysfs接口<sysfs_interface>`。 DAMON导出了八个文件, ``attrs``, ``target_ids``, ``init_regions``, -``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和 +``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
@@ -521,15 +521,15 @@ 大于60%,或低于30%,则停止监� 开关 ---- -除非你明确地启动监测,否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on`` +除非你明确地启动监测,否则如上所述的文件设置不会产生效果。你可以通过写入和读取 ``monitor_on_DEPRECATED`` 文件来启动、停止和检查监测的当前状态。写入 ``on`` 该文件可以启动对有属性的目标的监测。写入 ``off`` 该文件则停止这些目标。如果每个目标进程被终止,DAMON也会停止。下面的示例命令开启、关 闭和检查DAMON的状态:: # cd <debugfs>/damon - # echo on > monitor_on - # echo off > monitor_on - # cat monitor_on + # echo on > monitor_on_DEPRECATED + # echo off > monitor_on_DEPRECATED + # cat monitor_on_DEPRECATED off 请注意,当监测开启时,你不能写到上述的debugfs文件。如果你在DAMON运行时写到这些文件,将会返
@@ -543,11 +543,11 @@ DAMON通过一个叫做kdamond的内核� 得该线程的 ``pid`` 。当监测被 ``关闭`` 时,读取该文件不会返回任何信息:: # cd <debugfs>/damon - # cat monitor_on + # cat monitor_on_DEPRECATED off # cat kdamond_pid none - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # cat kdamond_pid 18594
@@ -574,7 +574,7 @@ 如果不再需要上下文,你可以� # ls foo # ls: cannot access 'foo': No such file or directory -注意, ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目录下。 +注意, ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目录下。 监测结果的监测点
@@ -583,9 +583,9 @@ 监测结果的监测点 DAMON通过一个tracepoint ``damon:damon_aggregated`` 提供监测结果. 当监测开启时,你可 以记录追踪点事件,并使用追踪点支持工具如perf显示结果。比如说:: - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # perf record -e damon:damon_aggregated & # sleep 5 # kill 9 $(pidof perf) - # echo off > monitor_on + # echo off > monitor_on_DEPRECATED # perf script
Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst renamed from Documentation/translations/zh_TW/admin-guide/mm/damon/usage.rst~docs-translations-damon-usage-update-for-monitor_on-renaming +10 -10
@@ -344,7 +344,7 @@ debugfs接口 :ref:`sysfs接口<sysfs_interface>`。 DAMON導出了八個文件, ``attrs``, ``target_ids``, ``init_regions``, -``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` 和 +``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``, ``mk_contexts`` 和 ``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
@@ -521,15 +521,15 @@ 大於60%,或低於30%,則停止監� 開關 ---- -除非你明確地啓動監測,否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on`` +除非你明確地啓動監測,否則如上所述的文件設置不會產生效果。你可以通過寫入和讀取 ``monitor_on_DEPRECATED`` 文件來啓動、停止和檢查監測的當前狀態。寫入 ``on`` 該文件可以啓動對有屬性的目標的監測。寫入 ``off`` 該文件則停止這些目標。如果每個目標進程被終止,DAMON也會停止。下面的示例命令開啓、關 閉和檢查DAMON的狀態:: # cd <debugfs>/damon - # echo on > monitor_on - # echo off > monitor_on - # cat monitor_on + # echo on > monitor_on_DEPRECATED + # echo off > monitor_on_DEPRECATED + # cat monitor_on_DEPRECATED off 請注意,當監測開啓時,你不能寫到上述的debugfs文件。如果你在DAMON運行時寫到這些文件,將會返
@@ -543,11 +543,11 @@ DAMON通過一個叫做kdamond的內核� 得該線程的 ``pid`` 。當監測被 ``關閉`` 時,讀取該文件不會返回任何信息:: # cd <debugfs>/damon - # cat monitor_on + # cat monitor_on_DEPRECATED off # cat kdamond_pid none - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # cat kdamond_pid 18594
@@ -574,7 +574,7 @@ 如果不再需要上下文,你可以� # ls foo # ls: cannot access 'foo': No such file or directory -注意, ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on`` 文件只在根目錄下。 +注意, ``mk_contexts`` 、 ``rm_contexts`` 和 ``monitor_on_DEPRECATED`` 文件只在根目錄下。 監測結果的監測點
@@ -583,10 +583,10 @@ 監測結果的監測點 DAMON通過一個tracepoint ``damon:damon_aggregated`` 提供監測結果. 當監測開啓時,你可 以記錄追蹤點事件,並使用追蹤點支持工具如perf顯示結果。比如說:: - # echo on > monitor_on + # echo on > monitor_on_DEPRECATED # perf record -e damon:damon_aggregated & # sleep 5 # kill 9 $(pidof perf) - # echo off > monitor_on + # echo off > monitor_on_DEPRECATED # perf script
_
Patches currently in -mm which might be from [email protected] are
docs-mm-damon-maintainer-profile-fix-reference-links-for-mm-stable-tree.patch docs-mm-damon-move-the-list-of-damos-actions-to-design-doc.patch docs-mm-damon-move-damon-operation-sets-list-from-the-usage-to-the-design-document.patch docs-mm-damon-move-damon-operation-sets-list-from-the-usage-to-the-design-document-fix.patch docs-mm-damon-move-monitoring-target-regions-setup-detail-from-the-usage-to-the-design-document.patch docs-admin-guide-mm-damon-usage-fix-wrong-quotas-diabling-condition.patch mm-damon-core-set-damos_quota-esz-as-public-field-and-document.patch mm-damon-sysfs-schemes-implement-quota-effective_bytes-file.patch mm-damon-sysfs-implement-a-kdamond-command-for-updating-schemes-effective-quotas.patch docs-abi-damon-document-effective_bytes-sysfs-file.patch docs-admin-guide-mm-damon-usage-document-effective_bytes-file.patch mm-damon-move-comments-and-fields-for-damos-quota-prioritization-to-the-end.patch mm-damon-core-split-out-quota-goal-related-fields-to-a-struct.patch mm-damon-core-add-multiple-goals-per-damos_quota-and-helpers-for-those.patch mm-damon-sysfs-use-only-quota-goals.patch mm-damon-core-remove-goal-field-of-damos_quota.patch mm-damon-core-let-goal-specified-with-only-target-and-current-values.patch mm-damon-core-support-multiple-metrics-for-quota-goal.patch mm-damon-core-implement-psi-metric-damos-quota-goal.patch mm-damon-sysfs-schemes-support-psi-based-quota-auto-tune.patch docs-mm-damon-design-document-quota-goal-self-tuning.patch docs-abi-damon-document-quota-goal-metric-file.patch docs-admin-guide-mm-damon-usage-document-quota-goal-metric-file.patch docs-admin-guide-mm-damon-usage-document-quota-goal-metric-file-fix.patch mm-damon-reclaim-implement-user-feedback-driven-quota-auto-tuning.patch mm-damon-reclaim-implement-memory-psi-driven-quota-self-tuning.patch docs-admin-guide-mm-damon-reclaim-document-auto-tuning-parameters.patch