Qualcomm ARM32 DeviceTree changes for v6.9

The following changes since commit 6613476e225e090cc9aad49be7fa504e290dd33d:

Linux 6.8-rc1 (2024-01-21 14:11:32 -0800)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm32-for-6.9

for you to fetch changes up to 450e178facd62b23bb7638f20a3c99436ee80640:

ARM: dts: qcom: samsung-matisse-common: Add UART (2024-02-18 23:00:31 -0600)

----------------------------------------------------------------
Qualcomm ARM32 DeviceTree changes for v6.9

Support for the Samsung Galaxy Tab 4 10.1 LTE is added.

On MSM8226 CPU, SAW and ACC nodes are introduced to enable SMP support. Watchdog definition is also added, and all nodes are sorted and cleaned up.
rmtfs memory is defined on HTC One Mini 2, vibrator support is addedto LG G Watch R, touch keycodes are defined for Samsung Galaxy Tab 4. The Samsung Galaxy Tab 4 DeviceTree is refactored to allow more variants to be introduced easily.

The SAW nodes across APQ8064, IPQ8064, MSM8960 and MSM8974 are updated based on recent work on the binding and driver.

On IPQ8064 SAW nodes are cleaned up, and unused reset-names is dropped from DWC3.

On MSM8960 GSBI3 and the I2C bus therein is introduced, in order to introduce touchscreen support on the Samsung Galaxy Express SGH-I437. gpio-keys are introduced on the same.

On MSM8974 the QFPROM register size is corrected. The order of the clocks in the SDX65 DWC3 node is corrected to match the binding.

For a variety of platforms interrupt-related constants are replaced with defined.

The mach-qcom Kconfig options are cleaned up, to avoid unnecessary per-platform options.

----------------------------------------------------------------
Craig Tatlor (1):
ARM: dts: qcom: msm8974: correct qfprom node size

David Heidelberg (1):
ARM: dts: qcom: msm8960: drop 2nd clock frequency from timer

Dmitry Baryshkov (20):
iommu/msm-iommu: don't limit the driver too much
ARM: qcom: drop most of 32-bit ARCH_QCOM subtypes
ARM: qcom: merge remaining subplatforms into sensible Kconfig entry
ARM: dts: qcom: apq8084: use new compat string for L2 SAW2 unit
ARM: dts: qcom: msm8974: use new compat string for L2 SAW2 unit
ARM: dts: qcom: msm8960: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq4019: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: ipq8064: use SoC-specific compatibles for SAW2 devices
ARM: dts: qcom: apq8064: rename SAW nodes to power-manager
ARM: dts: qcom: apq8084: rename SAW nodes to power-manager
ARM: dts: qcom: msm8960: rename SAW nodes to power-manager
ARM: dts: qcom: msm8974: rename SAW nodes to power-manager
ARM: dts: qcom: ipq4019: rename SAW nodes to power-manager
ARM: dts: qcom: ipq8064: rename SAW nodes to power-manager
ARM: dts: qcom: apq8064: declare SAW2 regulators
ARM: dts: qcom: msm8960: declare SAW2 regulators
ARM: dts: qcom: apq8084: drop 'regulator' property from SAW2 device
ARM: dts: qcom: msm8974: drop 'regulator' property from SAW2 device
ARM: dts: qcom: ipq4019: drop 'regulator' property from SAW2 devices
ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices

Ivaylo Ivanov (1):
ARM: dts: qcom: msm8226: Add CPU and SAW/ACC nodes

Krzysztof Kozlowski (4):
ARM: dts: qcom: ipq8064: drop unused reset-names from DWC3 node
ARM: dts: qcom: sdx65: correct clock order in DWC3 node
ARM: dts: qcom: ipq4019: correct clock order in DWC3 node
ARM: dts: qcom: use defines for interrupts

Luca Weiss (2):
ARM: dts: qcom: msm8926-htc-memul: Add rmtfs memory node
ARM: dts: qcom: apq8026-lg-lenok: Add vibrator support

Matti Lehtimäki (3):
ARM: dts: qcom: apq8026-samsung-matissewifi: Configure touch keys
ARM: dts: qcom: msm8226: Sort and clean up nodes
ARM: dts: qcom: msm8226: Add watchdog node

Robert Marko (2):
ARM: dts: qcom: ipq4019-ap.dk01.1: use existing labels for nodes
ARM: dts: qcom: ipq4019-ap.dk01.1: align flash node with bindings

Rudraksha Gupta (3):
ARM: dts: qcom: msm8960: expressatt: Add gpio-keys
ARM: dts: qcom: msm8960: Add gsbi3 node
ARM: dts: qcom: msm8960: expressatt: Add mXT224S touchscreen

Stefan Hansson (3):
ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
ARM: dts: qcom: samsung-matisse-common: Add UART

 arch/arm/Makefile                                  |   4 +-
 arch/arm/boot/dts/qcom/Makefile                    |   1 +
 arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts   |  38 ++
 .../dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts | 452 +------------
 arch/arm/boot/dts/qcom/qcom-apq8064.dtsi           |  70 +-
 arch/arm/boot/dts/qcom/qcom-apq8084.dtsi           |  13 +-
 arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk01.1.dtsi | 138 ++--
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi           |  35 +-
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi           |  12 +-
 .../qcom/qcom-msm8226-samsung-matisse-common.dtsi  | 457 +++++++++++++
 arch/arm/boot/dts/qcom/qcom-msm8226.dtsi           | 736 ++++++++++++---------
 arch/arm/boot/dts/qcom/qcom-msm8660.dtsi           |  17 +-
 arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts  |  15 +-
 .../dts/qcom/qcom-msm8926-samsung-matisselte.dts   |  37 ++
 arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi      |  21 +
 .../dts/qcom/qcom-msm8960-samsung-expressatt.dts   |  71 +-
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi           |  48 +-
 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi           |  33 +-
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi             |  18 +-
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |  34 +-
 arch/arm/mach-qcom/Kconfig                         |  41 +-
 drivers/iommu/Kconfig                              |   2 +-
 22 files changed, 1307 insertions(+), 986 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-matisse-common.dtsi
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8926-samsung-matisselte.dts
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi