Bluetooth: btintel: Define macros for image types
PATCH v3 1/2 Bluetooth: btintel: Define macros for image types
Use macro for image type instead of using hard code number.
--- drivers/bluetooth/btintel.c | 12 ++++++------ drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 9 insertions(+), 6 deletions(-)
drivers/bluetooth/btintel.c +6 -6
@@ -489,7 +489,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, }switch (version->img_type) { -case 0x01 : +case IMG_BOOTLOADER : variant ="Bootloader" ;/* It is required that every single firmware fragment is acknowledged * with a command complete event. If the boot parameters indicate
@@ -521,7 +521,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; -case 0x03 : +case IMG_OP : variant ="Firmware" ;break ;default :
@@ -535,7 +535,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,bt_dev_info (hdev,"%s timestamp %u.%u buildtype %u build %u" , variant,2000 + (version->timestamp >>8 ), version->timestamp &0xff , version->build_type, version->build_num); -if (version->img_type ==0x03 ) +if (version->img_type ==IMG_OP )bt_dev_info (hdev,"Firmware SHA1: 0x%8.8x" , version->git_sha1);return 0 ;
@@ -1172,7 +1172,7 @@ static int btintel_download_fw_tlv(struct hci_dev *hdev,* If the firmware version has changed that means it needs to be reset * to bootloader when operational so the new firmware can be loaded. */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP )return -EINVAL ;/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
@@ -2230,7 +2230,7 @@ static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,* It is not possible to use the Secure Boot Parameters in this * case since that command is only available in bootloader mode. */ -if (ver->img_type ==0x03 ) { +if (ver->img_type ==IMG_OP ) {btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_check_bdaddr (hdev); }else {
@@ -2600,7 +2600,7 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,return err;/* check if controller is already having an operational firmware */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP ) goto finish; err =btintel_boot (hdev, boot_param);
drivers/bluetooth/btintel.h +3 -0
@@ -51,6 +51,9 @@ struct intel_tlv {u8 val[]; } __packed; +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_OP 0x03/* Operational image */ +struct intel_version_tlv {u32 cnvi_top;u32 cnvr_top;
Signature · 1 line
2.34.1
PATCH v3 2/2 Bluetooth: btintel: Add support for downloading intermediate loader
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image.
dmesg logs:
[13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11
--- drivers/bluetooth/btintel.c | 38 ++++++++++++++++++++++++++++++++++++- drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 40 insertions(+), 1 deletion(-)
drivers/bluetooth/btintel.c +37 -1
@@ -521,6 +521,9 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; +case IMG_IML : + variant ="Intermediate loader" ; +break ;case IMG_OP : variant ="Firmware" ;break ;
@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, char *fw_name, size_t len, const char *suffix) { + const char *format;/* The firmware file name for new generation controllers will be * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", +switch (ver->cnvi_top &0xfff ) { +/* Only Blazar product supports downloading of intermediate loader +* image +*/ +case CNVI_BLAZARI : +if (ver->img_type ==IMG_BOOTLOADER ) + format ="intel/ibt-%04x-%04x-iml.%s" ; +else + format ="intel/ibt-%04x-%04x.%s" ; +break ; +default : + format ="intel/ibt-%04x-%04x.%s" ; +break ; + } + + snprintf(fw_name, len, format, INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top), INTEL_CNVX_TOP_STEP(ver->cnvi_top)), INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
@@ -2607,6 +2626,23 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,if (err)return err; + err =btintel_read_version_tlv (hdev, ver); +if (err) +return err; + +/* If image type returned is IMG_IML, then controller supports +* intermediae loader image +*/ +if (ver->img_type ==IMG_IML ) { + err =btintel_prepare_fw_download_tlv (hdev, ver, &boot_param); +if (err) +return err; + + err =btintel_boot (hdev, boot_param); +if (err) +return err; + } +btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_get_fw_name_tlv (ver, ddcname,sizeof (ddcname),"ddc" );
drivers/bluetooth/btintel.h +3 -0
@@ -51,7 +51,10 @@ struct intel_tlv {u8 val[]; } __packed; +#define CNVI_BLAZARI 0x900 +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_IML 0x02/* Intermediate image */ #define IMG_OP 0x03/* Operational image */ struct intel_version_tlv {
Signature · 1 line
2.34.1
Luiz Augusto von Dentz
maintainerRe: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loader
Hi Kiran,
Quoted 84 lines · Kiran K
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before downloading operational firmware image.
dmesg logs:
[13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth: ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919] Bluetooth: HCI device and connection manager initialized [13.422923] Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0 [13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [13.565148] Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth: hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0: Boot Address: 0x10000800 [13.569062] Bluetooth: hci0: Firmware Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast [13.788902] Bluetooth: BNEP socket layer initialized [15.435905] Bluetooth: hci0: Waiting for firmware download to complete [15.436016] Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258] Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth: hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth: hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth: hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299] Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381] Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595 [15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243] Bluetooth: hci0: Fseq status: Success (0x00) [15.483246] Bluetooth: hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682] Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 38 ++++++++++++++++++++++++++++++++++++- drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 40 insertions(+), 1 deletion(-)drivers/bluetooth/btintel.c +4
-0@@ -521,6 +521,9 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; +case IMG_IML : + variant ="Intermediate loader" ; +break ;case IMG_OP : variant ="Firmware" ;break ;@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, char *fw_name, size_t len, const char *suffix) { + const char *format;/* The firmware file name for new generation controllers will be
drivers/bluetooth/btintel.c static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, · line 2210
Quoted 10 lines
drivers/bluetooth/btintel.c +7
-1* ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", +switch (ver->cnvi_top &0xfff ) { +/* Only Blazar product supports downloading of intermediate loader +* image +*/ +case CNVI_BLAZARI : +if (ver->img_type ==IMG_BOOTLOADER ) + format ="intel/ibt-%04x-%04x-iml.%s" ;
Shouldn't iml be the extension rather than the name? Like in intel/ibt-0090-0291.iml which you can probably achieve by just replacing suffix, that said this function seems to be called with .ddc as suffix as well so I assume there is some check preventing it to be called while version is IMG_BOOTLOADER?
Quoted 55 lines
drivers/bluetooth/btintel.c +26
-0+else + format ="intel/ibt-%04x-%04x.%s" ; +break ; +default : + format ="intel/ibt-%04x-%04x.%s" ; +break ; + } + + snprintf(fw_name, len, format, INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top), INTEL_CNVX_TOP_STEP(ver->cnvi_top)), INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),@@ -2607,6 +2626,23 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,if (err)return err; + err =btintel_read_version_tlv (hdev, ver); +if (err) +return err; + +/* If image type returned is IMG_IML, then controller supports +* intermediae loader image +*/ +if (ver->img_type ==IMG_IML ) { + err =btintel_prepare_fw_download_tlv (hdev, ver, &boot_param); +if (err) +return err; + + err =btintel_boot (hdev, boot_param); +if (err) +return err; + } +btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_get_fw_name_tlv (ver, ddcname,sizeof (ddcname),"ddc" );drivers/bluetooth/btintel.h +3
-1@@ -51,7 +51,10 @@ struct intel_tlv {u8 val[]; } __packed; +#define CNVI_BLAZARI 0x900 +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_IML 0x02/* Intermediate image */ #define IMG_OP 0x03/* Operational image */ struct intel_version_tlv { --2.34.1
Signature · 1 line
Luiz Augusto von Dentz
RE: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loader
Hi Luiz,
Thanks for the comments.
Quoted 105 lines
-----Original Message-----
From: Luiz Augusto von Dentz <[email protected]>
Sent: Wednesday, March 6, 2024 3:57 AM
To: K, Kiran <[email protected]>
Cc: [email protected]; Srivatsa, Ravishankar <[email protected]>; Tumkur Narayan, Chethan <[email protected]>
Subject: Re: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loaderHi Kiran,
Quoted 5 lines · Kiran K
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before
downloading operational firmware image.
drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev
Quoted 59 lines
dmesg logs:
[13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth:ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919]
Bluetooth: HCI device and connection manager initialized [13.422923]
Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0[13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029]Bluetooth: hci0: Malformed MSFT vendor event:
0x02[13.565148]
Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth:
hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0:
Boot Address:0x10000800[13.569062] Bluetooth: hci0: Firmware
Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast[13.788902] Bluetooth: BNEP socket layer initialized [15.435905]Bluetooth: hci0: Waiting for firmware download to complete [15.436016]
Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258]
Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth:
hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0:
Malformed MSFT vendor event:0x02[15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth:
hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth:
hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299]
Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381]
Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595[15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243]Bluetooth: hci0: Fseq status: Success (
0x00) [15.483246] Bluetooth:
hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT
Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682]
Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 38 ++++++++++++++++++++++++++++++++++++- drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 40 insertions(+), 1 deletion(-)drivers/bluetooth/btintel.c +0
-0@@ -521,6 +521,9 @@ static int btintel_version_info_tlv(struct hci_dev*hdev,
drivers/bluetooth/btintel.c static void btintel_get_fw_name_tlv(const
Quoted 10 lines
drivers/bluetooth/btintel.c +3
-0version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; +case IMG_IML : + variant ="Intermediate loader" ; +break ;case IMG_OP : variant ="Firmware" ;break ;@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(conststruct
intel_version_tlv*ver,Quoted 4 lines
drivers/bluetooth/btintel.c +1
-0char *fw_name, size_t len, const char *suffix) { + const char *format;/* The firmware file name for new generation controllers will be drivers/bluetooth/btintel.c static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, · line 2210
Quoted 10 lines
drivers/bluetooth/btintel.c +7
-1* ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", +switch (ver->cnvi_top &0xfff ) { +/* Only Blazar product supports downloading of intermediate loader +* image +*/ +case CNVI_BLAZARI : +if (ver->img_type ==IMG_BOOTLOADER ) + format ="intel/ibt-%04x-%04x-iml.%s" ;
Quoted 3 lines
Shouldn't iml be the extension rather than the name? Like in intel/ibt-0090- 0291.iml which you can probably achieve by just replacing suffix, that said this function seems to be called with .ddc as suffix as well so I assume there is
I feel it's better to keep the extension as sfi as the image format for IML and OP binaries are same.
Quoted 1 line
some check preventing it to be called while version is
IMG_BOOTLOADER?
There is no such restriction. The same function gets called even when version is IMG_BOOTLOADER. Inside this function we check for product and version to decide whether to load IML or OP image.
Quoted 54 lines
drivers/bluetooth/btintel.c static int btintel_bootloader_setup_tlv(struct
Quoted 16 lines
drivers/bluetooth/btintel.c +9
-0+else + format ="intel/ibt-%04x-%04x.%s" ; +break ; +default : + format ="intel/ibt-%04x-%04x.%s" ; +break ; + } + + snprintf(fw_name, len, format, INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver- cnvi_top), INTEL_CNVX_TOP_STEP(ver->cnvi_top)),INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
drivers/bluetooth/btintel.c +0
-0@@ -2607,6 +2626,23 @@ static int btintel_bootloader_setup_tlv(struct
hci_dev*hdev,Quoted 37 lines
drivers/bluetooth/btintel.c +17
-0if (err)return err; + err =btintel_read_version_tlv (hdev, ver); +if (err) +return err; + +/* If image type returned is IMG_IML, then controller supports +* intermediae loader image +*/ +if (ver->img_type ==IMG_IML ) { + err =btintel_prepare_fw_download_tlv (hdev, ver, &boot_param); +if (err) +return err; + + err =btintel_boot (hdev, boot_param); +if (err) +return err; + } +btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_get_fw_name_tlv (ver, ddcname,sizeof (ddcname),"ddc" );drivers/bluetooth/btintel.h +3
-0@@ -51,7 +51,10 @@ struct intel_tlv {u8 val[]; } __packed; +#define CNVI_BLAZARI 0x900 +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_IML 0x02/* Intermediate image */ #define IMG_OP 0x03/* Operational image */
Quoted 9 lines
Quoted 5 lines
drivers/bluetooth/btintel.h +0
-1struct intel_version_tlv { --2.34.1
--
Luiz Augusto von Dentz
Regards,
Kiran
Luiz Augusto von Dentz
maintainerRe: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loader
Hi Kiran,
Quoted 110 lines · Kiran
Hi Luiz,
Thanks for the comments.
Quoted 105 lines
-----Original Message-----
From: Luiz Augusto von Dentz <[email protected]>
Sent: Wednesday, March 6, 2024 3:57 AM
To: K, Kiran <[email protected]>
Cc: [email protected]; Srivatsa, Ravishankar <[email protected]>; Tumkur Narayan, Chethan <[email protected]>
Subject: Re: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loaderHi Kiran,
Quoted 5 lines · Kiran K
Some variants of Intel controllers like BlazarI supports downloading of Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its not possible to fix issue in Primary bootloader once flashed to ROM. This patch adds the support to download IML before
downloading operational firmware image.
drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev
Quoted 59 lines
dmesg logs:
[13.399003] Bluetooth: Core ver 2.22 [13.399006] Bluetooth: Starting self testing [13.401194] Bluetooth:ECDH test passed in 2135 usecs [13.421175] Bluetooth: SMP test passed in 597 usecs [13.421184] Bluetooth: Finished self testing [13.422919]
Bluetooth: HCI device and connection manager initialized [13.422923]
Bluetooth: HCI socket layer initialized [13.422925] Bluetooth: L2CAP socket layer initialized [13.422930] Bluetooth: SCO socket layer initialized [13.458065] Bluetooth: hci0: Device revision is 0[13.458071] Bluetooth: hci0: Secure boot is disabled [13.458072] Bluetooth: hci0: OTP lock is disabled [13.458072] Bluetooth: hci0: API lock is enabled [13.458073] Bluetooth: hci0: Debug lock is disabled [13.458073] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 [13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590 [13.458324] Bluetooth: hci0: DSM reset method type: 0x00 [13.460678] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291-iml.sfi [13.460684] Bluetooth: hci0: Boot Address: 0x30099000 [13.460685] Bluetooth: hci0: Firmware Version: 227-11.24 [13.562554] Bluetooth: hci0: Waiting for firmware download to complete [13.563023] Bluetooth: hci0: Firmware loaded in 99941 usecs [13.563057] Bluetooth: hci0: Waiting for device to boot [13.565029]Bluetooth: hci0: Malformed MSFT vendor event:
0x02[13.565148]
Bluetooth: hci0: Device booted in 2064 usecs [13.567065] Bluetooth:
hci0: No device address configured [13.569010] Bluetooth: hci0: Found device firmware: intel/ibt-0090-0291.sfi [13.569061] Bluetooth: hci0:
Boot Address:0x10000800[13.569062] Bluetooth: hci0: Firmware
Version: 227-11.24 [13.788891] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [13.788897] Bluetooth: BNEP filters: protocol multicast[13.788902] Bluetooth: BNEP socket layer initialized [15.435905]Bluetooth: hci0: Waiting for firmware download to complete [15.436016]
Bluetooth: hci0: Firmware loaded in 1823233 usecs [15.436258]
Bluetooth: hci0: Waiting for device to boot [15.471140] Bluetooth:
hci0: Device booted in 34277 usecs [15.471201] Bluetooth: hci0:
Malformed MSFT vendor event:0x02[15.471487] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0090-0291.ddc [15.474353] Bluetooth:
hci0: Applying Intel DDC parameters completed [15.474486] Bluetooth:
hci0: Found Intel DDC parameters: intel/bdaddress.cfg [15.475299]
Bluetooth: hci0: Applying Intel DDC parameters completed [15.479381]
Bluetooth: hci0: Firmware timestamp 2024.10 buildtype 3 build 58595[15.479385] Bluetooth: hci0: Firmware SHA1: 0xb4f3cc46 [15.483243]Bluetooth: hci0: Fseq status: Success (
0x00) [15.483246] Bluetooth:
hci0: Fseq executed: 00.00.00.00 [15.483247] Bluetooth: hci0: Fseq BT
Top: 00.00.00.00 [15.578712] Bluetooth: MGMT ver 1.22 [15.822682]
Bluetooth: RFCOMM TTY layer initialized [15.822690] Bluetooth: RFCOMM socket layer initialized [15.822695] Bluetooth: RFCOMM ver 1.11Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 38 ++++++++++++++++++++++++++++++++++++- drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 40 insertions(+), 1 deletion(-)drivers/bluetooth/btintel.c +0
-0@@ -521,6 +521,9 @@ static int btintel_version_info_tlv(struct hci_dev*hdev,
drivers/bluetooth/btintel.c static void btintel_get_fw_name_tlv(const
Quoted 10 lines
drivers/bluetooth/btintel.c +3
-0version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; +case IMG_IML : + variant ="Intermediate loader" ; +break ;case IMG_OP : variant ="Firmware" ;break ;@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(conststruct
intel_version_tlv*ver,Quoted 14 lines
drivers/bluetooth/btintel.c +8
-1char *fw_name, size_t len, const char *suffix) { + const char *format;/* The firmware file name for new generation controllers will be * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", +switch (ver->cnvi_top &0xfff ) { +/* Only Blazar product supports downloading of intermediate loader +* image +*/ +case CNVI_BLAZARI : +if (ver->img_type ==IMG_BOOTLOADER ) + format ="intel/ibt-%04x-%04x-iml.%s" ;
Quoted 5 lines
Quoted 3 lines
Shouldn't iml be the extension rather than the name? Like in intel/ibt-0090- 0291.iml which you can probably achieve by just replacing suffix, that said this function seems to be called with .ddc as suffix as well so I assume there is
I feel it's better to keep the extension as sfi as the image format for IML and OP binaries are same.
So sfi and ddc are file formats? The only thing Ive found was:
https://filext.com/file-extension/SFI
They sound more like binary blobs, .bin, or image files .img, but we choose to distinct them via file extension, thus why Is suggested to use .iml.
Quoted 2 lines
Quoted 1 line
some check preventing it to be called while version is
IMG_BOOTLOADER?There is no such restriction. The same function gets called even when version is
IMG_BOOTLOADER. Inside this function we check for product and version to decide whether to load IML or OP image.
Wouldn't we end up having *iml.ddc then?
Quoted 67 lines
Quoted 54 lines
drivers/bluetooth/btintel.c static int btintel_bootloader_setup_tlv(struct
Quoted 16 lines
drivers/bluetooth/btintel.c +9
-0+else + format ="intel/ibt-%04x-%04x.%s" ; +break ; +default : + format ="intel/ibt-%04x-%04x.%s" ; +break ; + } + + snprintf(fw_name, len, format, INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver- cnvi_top), INTEL_CNVX_TOP_STEP(ver->cnvi_top)),INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
drivers/bluetooth/btintel.c +0
-0@@ -2607,6 +2626,23 @@ static int btintel_bootloader_setup_tlv(struct
hci_dev*hdev,Quoted 37 lines
drivers/bluetooth/btintel.c +17
-0if (err)return err; + err =btintel_read_version_tlv (hdev, ver); +if (err) +return err; + +/* If image type returned is IMG_IML, then controller supports +* intermediae loader image +*/ +if (ver->img_type ==IMG_IML ) { + err =btintel_prepare_fw_download_tlv (hdev, ver, &boot_param); +if (err) +return err; + + err =btintel_boot (hdev, boot_param); +if (err) +return err; + } +btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_get_fw_name_tlv (ver, ddcname,sizeof (ddcname),"ddc" );drivers/bluetooth/btintel.h +3
-0@@ -51,7 +51,10 @@ struct intel_tlv {u8 val[]; } __packed; +#define CNVI_BLAZARI 0x900 +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_IML 0x02/* Intermediate image */ #define IMG_OP 0x03/* Operational image */ Quoted 9 lines
Quoted 5 lines
drivers/bluetooth/btintel.h +0
-1struct intel_version_tlv { --2.34.1
--
Luiz Augusto von DentzRegards,
Kiran
Signature · 1 line
Luiz Augusto von Dentz
RE: [PATCH v3 2/2] Bluetooth: btintel: Add support for downloading intermediate loader
Hi Luiz,
Quoted 24 lines
Quoted 11 lines
Quoted 11 lines
Review static void btintel_get_fw_name_tlv(const
Quoted 1 line
(quoted diff) +0
-0@@ -2194,10 +2197,26 @@ static void btintel_get_fw_name_tlv(conststruct
intel_version_tlv*ver,Quoted 9 lines
drivers/bluetooth/btintel.c +3
-1char *fw_name, size_t len, const char *suffix) { + const char *format;/* The firmware file name for new generation controllers will be * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", +switch (ver->cnvi_top &0xfff ) { +/* Only Blazar product supports downloading of intermediate loader
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
drivers/bluetooth/btintel.c +5
-0+* image +*/ +case CNVI_BLAZARI : +if (ver->img_type ==IMG_BOOTLOADER ) + format ="intel/ibt-%04x-%04x-iml.%s" ;Quoted 6 lines
Quoted 4 lines
Shouldn't iml be the extension rather than the name? Like in intel/ibt-0090- 0291.iml which you can probably achieve by just replacing suffix, that said this function seems to be called with .ddc as suffix as well so I assume there is
I feel it's better to keep the extension as sfi as the image format for IML and
Quoted 9 lines
OP binaries are same.
So sfi and ddc are file formats? The only thing Ive found was:
https://filext.com/file-extension/SFI
They sound more like binary blobs, .bin, or image files .img, but we choose to distinct them via file extension, thus why Is suggested to use .iml.
When I said format I was referring to the placement of INIT, DATA, KEY segments. Sorry if it sounds confusing. Both the images follow the same format and firmware download process is also same.
Quoted 7 lines
Quoted 2 lines
Quoted 1 line
some check preventing it to be called while version is
IMG_BOOTLOADER?There is no such restriction. The same function gets called even when
version is
IMG_BOOTLOADER. Inside this function we check for product and version to decide whether to load IML or OP image.Wouldn't we end up having *iml.ddc then?
No. ddc is only for operational image.
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
drivers/bluetooth/btintel.c static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, · line 2213
Quoted 4 lines
drivers/bluetooth/btintel.c +3
-0+else + format ="intel/ibt-%04x-%04x.%s" ; +break ;
Thanks,
Kiran
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=832561
---Test result---
Test Summary:
CheckPatch FAIL 1.91 seconds GitLint FAIL 0.85 seconds SubjectPrefix PASS 0.23 seconds BuildKernel PASS 27.66 seconds CheckAllWarning PASS 30.39 seconds CheckSparse PASS 35.88 seconds CheckSmatch PASS 98.13 seconds BuildKernel32 PASS 26.83 seconds TestRunnerSetup PASS 495.42 seconds TestRunner_l2cap-tester PASS 19.98 seconds TestRunner_iso-tester PASS 30.26 seconds TestRunner_bnep-tester PASS 4.80 seconds TestRunner_mgmt-tester PASS 113.15 seconds TestRunner_rfcomm-tester PASS 7.34 seconds TestRunner_sco-tester PASS 14.98 seconds TestRunner_ioctl-tester PASS 7.76 seconds TestRunner_mesh-tester PASS 5.85 seconds TestRunner_smp-tester PASS 6.84 seconds TestRunner_userchan-tester PASS 4.95 seconds IncrementalBuild PASS 32.14 seconds
Details
##############################
Test: CheckPatch - FAIL
Desc: Run checkpatch.pl script
Output:
[v3,2/2] Bluetooth: btintel: Add support for downloading intermediate loader
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?) #80:
Intermediate bootloader (IML) image. IML gives flexibility to fix issues as its
total: 0 errors, 1 warnings, 69 lines checked
NOTE: For some of the reported defects, checkpatch may be able to
mechanically convert to the typical style using --fix or --fix-inplace.
/github/workspace/src/src/13582504.patch has style problems, please review.
NOTE: Ignored message types: UNKNOWN_COMMIT_ID
NOTE: If any of the errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v3,2/2] Bluetooth: btintel: Add support for downloading intermediate loader
WARNING: I3 - ignore-body-lines: gitlint will be switching from using Python regex 'match' (match beginning) to 'search' (match anywhere) semantics. Please review your ignore-body-lines.regex option accordingly. To remove this warning, set general.regex-style-search=True. More details: https://jorisroovers.github.io/gitlint/configuration/#regex-style-search
24: B1 Line exceeds max length (81>80): "[13.458075] Bluetooth: hci0: Bootloader timestamp 2022.46 buildtype 1 build 26590"
---
Regards,
Linux Bluetooth
Luiz Augusto von Dentz
maintainerHi Kiran,
Quoted 72 lines · Kiran K
Use macro for image type instead of using hard code number.
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 12 ++++++------ drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 9 insertions(+), 6 deletions(-)drivers/bluetooth/btintel.c +6
-6@@ -489,7 +489,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, }switch (version->img_type) { -case 0x01 : +case IMG_BOOTLOADER : variant ="Bootloader" ;/* It is required that every single firmware fragment is acknowledged * with a command complete event. If the boot parameters indicate @@ -521,7 +521,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev, version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy);break ; -case 0x03 : +case IMG_OP : variant ="Firmware" ;break ;default :@@ -535,7 +535,7 @@ static int btintel_version_info_tlv(struct hci_dev *hdev,bt_dev_info (hdev,"%s timestamp %u.%u buildtype %u build %u" , variant,2000 + (version->timestamp >>8 ), version->timestamp &0xff , version->build_type, version->build_num); -if (version->img_type ==0x03 ) +if (version->img_type ==IMG_OP )bt_dev_info (hdev,"Firmware SHA1: 0x%8.8x" , version->git_sha1);return 0 ;@@ -1172,7 +1172,7 @@ static int btintel_download_fw_tlv(struct hci_dev *hdev,* If the firmware version has changed that means it needs to be reset * to bootloader when operational so the new firmware can be loaded. */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP )return -EINVAL ;/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support @@ -2230,7 +2230,7 @@ static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,* It is not possible to use the Secure Boot Parameters in this * case since that command is only available in bootloader mode. */ -if (ver->img_type ==0x03 ) { +if (ver->img_type ==IMG_OP ) {btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_check_bdaddr (hdev); }else {@@ -2600,7 +2600,7 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,return err;/* check if controller is already having an operational firmware */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP ) goto finish; err =btintel_boot (hdev, boot_param);drivers/bluetooth/btintel.h +0
-0
drivers/bluetooth/btintel.h struct intel_tlv { · line 55
Quoted 5 lines
drivers/bluetooth/btintel.h +2
-0@@ -51,6 +51,9 @@ struct intel_tlv {u8 val[]; } __packed; +#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_OP 0x03/* Operational image */
Lets prefix these with BTINTEL.
Quoted 7 lines
drivers/bluetooth/btintel.h +0
-1struct intel_version_tlv {u32 cnvi_top;u32 cnvr_top; --2.34.1
Signature · 1 line
Luiz Augusto von Dentz
Hi Luiz,
Quoted 96 lines
-----Original Message-----
From: Luiz Augusto von Dentz <[email protected]>
Sent: Wednesday, March 6, 2024 4:13 AM
To: K, Kiran <[email protected]>
Cc: [email protected]; Srivatsa, Ravishankar <[email protected]>; Tumkur Narayan, Chethan <[email protected]>
Subject: Re: [PATCH v3 1/2] Bluetooth: btintel: Define macros for image typesHi Kiran,
drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev
Quoted 14 lines · Kiran K
Use macro for image type instead of using hard code number.
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 12 ++++++------ drivers/bluetooth/btintel.h | 3 +++ 2 files changed, 9 insertions(+), 6 deletions(-)drivers/bluetooth/btintel.c +0
-0@@ -489,7 +489,7 @@ static int btintel_version_info_tlv(struct hci_dev*hdev,
drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev *hdev,
Quoted 7 lines
drivers/bluetooth/btintel.c +1
-1}switch (version->img_type) { -case 0x01 : +case IMG_BOOTLOADER : variant ="Bootloader" ;/* It is required that every single firmware fragment is acknowledged
Quoted 2 lines
drivers/bluetooth/btintel.c +0
-0* with a command complete event. If the boot parameters indicate @@ -521,7 +521,7 @@ static int
btintel_version_info_tlv(struct
hci_dev*hdev,drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev
Quoted 9 lines
version->min_fw_build_nn, version->min_fw_build_cw, 2000 + version->min_fw_build_yy); break;drivers/bluetooth/btintel.c +1
-1-case 0x03 : +case IMG_OP : variant ="Firmware" ;break ;default :@@ -535,7 +535,7 @@ static int btintel_version_info_tlv(struct hci_dev*hdev,
drivers/bluetooth/btintel.c static int btintel_version_info_tlv(struct hci_dev · line 535
Quoted 1 line
drivers/bluetooth/btintel.c +0
-0bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u",variant,
drivers/bluetooth/btintel.c static int btintel_download_fw_tlv(struct hci_dev
Quoted 9 lines
drivers/bluetooth/btintel.c +1
-12000 + (version->timestamp >>8 ), version->timestamp &0xff , version->build_type, version->build_num); -if (version->img_type ==0x03 ) +if (version->img_type ==IMG_OP )bt_dev_info (hdev,"Firmware SHA1: 0x%8.8x" , version->git_sha1);return 0;drivers/bluetooth/btintel.c +0
-0@@ -1172,7 +1172,7 @@ static int btintel_download_fw_tlv(struct hci_dev*hdev,
Quoted 9 lines
drivers/bluetooth/btintel.c +1
-1* If the firmware version has changed that means it needs to be reset * to bootloader when operational so the new firmware can be loaded. */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP )return -EINVAL ;/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support @@ -2230,7 +2230,7 @@ static int
btintel_prepare_fw_download_tlv(struct
hci_dev*hdev,drivers/bluetooth/btintel.c static int btintel_bootloader_setup_tlv(struct
Quoted 9 lines
* It is not possible to use the Secure Boot Parameters in this
* case since that command is only available in bootloader mode. */drivers/bluetooth/btintel.c +1
-1-if (ver->img_type ==0x03 ) { +if (ver->img_type ==IMG_OP ) {btintel_clear_flag (hdev,INTEL_BOOTLOADER );btintel_check_bdaddr (hdev); }else {@@ -2600,7 +2600,7 @@ static int btintel_bootloader_setup_tlv(struct
hci_dev*hdev,Quoted 16 lines
drivers/bluetooth/btintel.c +1
-1return err;/* check if controller is already having an operational firmware */ -if (ver->img_type ==0x03 ) +if (ver->img_type ==IMG_OP ) goto finish; err = btintel_boot(hdev, boot_param); diff --git
a/drivers/bluetooth/btintel.hb/drivers/bluetooth/btintel.hindexd19fcdb9ff0b..52b2f1986f85100644drivers/bluetooth/btintel.h +0
-0@@ -51,6 +51,9 @@ struct intel_tlv {u8 val[]; } __packed;
Quoted 4 lines
drivers/bluetooth/btintel.h struct intel_tlv { · line 55
Quoted 2 lines
drivers/bluetooth/btintel.h +2
-0+#define IMG_BOOTLOADER 0x01/* Bootloader image */ +#define IMG_OP 0x03/* Operational image */ Lets prefix these with BTINTEL.
Ack.
Quoted 10 lines
Quoted 8 lines
drivers/bluetooth/btintel.h +0
-1struct intel_version_tlv {u32 cnvi_top;u32 cnvr_top; --2.34.1
Quoted 2 lines
--
Luiz Augusto von Dentz
Thanks,
Kiran