Skip to contentSkip to conversation

spi: Fix error code checking in spi_mem_exec_op()

PATCH In review Florian Fainelli 5 participants 5 messages Mar 13, 2024 – Mar 15, 2024 SPI

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 spi: Fix error code checking in spi_mem_exec_op()

After commit cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP"), our SPI NOR flashes would stop probing with the following visible in the kernel log:

[    2.196300] brcmstb_qspi f0440920.qspi: using bspi-mspi mode
[    2.210295] spi-nor: probe of spi1.0 failed with error -95

It turns out that the check in spi_mem_exec_op() was changed to check for -ENOTSUPP (old error code) or -EOPNOTSUPP (new error code), but this means that for drivers that were converted, the second condition is now true, and we stop falling through like we used to. Fix the error to check for neither error being neither -ENOTSUPP *nor* -EOPNOTSUPP.

Fixes cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP")

---
Changes in v2:

- collected R-by tags from Michael and Pratyush
- rebased against spi/for-next

 drivers/spi/spi-mem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/spi-mem.c +1 -1
index c9d6d42a88f5..17b8baf749e6 100644
@@ -382,7 +382,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 		 * read path) and expect the core to use the regular SPI
 		 * interface in other cases.
 		 */
-		if (!ret || ret != -ENOTSUPP || ret != -EOPNOTSUPP) {
+		if (!ret || (ret != -ENOTSUPP && ret != -EOPNOTSUPP)) {
 			spi_mem_add_op_stats(ctlr->pcpu_statistics, op, ret);
 			spi_mem_add_op_stats(mem->spi->pcpu_statistics, op, ret);
 
Signature · 1 line
2.34.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 13 lines · Florian Fainelli

After commit cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP"), our SPI NOR flashes would stop probing with the following visible in the kernel log:

[    2.196300] brcmstb_qspi f0440920.qspi: using bspi-mspi mode
[    2.210295] spi-nor: probe of spi1.0 failed with error -95

It turns out that the check in spi_mem_exec_op() was changed to check for -ENOTSUPP (old error code) or -EOPNOTSUPP (new error code), but this means that for drivers that were converted, the second condition is now true, and we stop falling through like we used to. Fix the error to check for neither error being neither -ENOTSUPP *nor* -EOPNOTSUPP.

Quoted 3 lines
Fixes cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP")
Reviewed-by on v2 1/1
#3 lore raw
In reply to Florian Fainelli

Hi Florian,

[email protected] wrote on Wed, 13 Mar 2024 12:45:30 -0700:

Quoted 13 lines

After commit cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP"), our SPI NOR flashes would stop probing with the following visible in the kernel log:

[    2.196300] brcmstb_qspi f0440920.qspi: using bspi-mspi mode
[    2.210295] spi-nor: probe of spi1.0 failed with error -95

It turns out that the check in spi_mem_exec_op() was changed to check for -ENOTSUPP (old error code) or -EOPNOTSUPP (new error code), but this means that for drivers that were converted, the second condition is now true, and we stop falling through like we used to. Fix the error to check for neither error being neither -ENOTSUPP *nor* -EOPNOTSUPP.

Quoted 4 lines
Fixes cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP")

Thanks for the fix!

maintainer
#4 lore raw
In reply to Florian Fainelli
Quoted 8 lines · Florian Fainelli

After commit cff49d58f57e ("spi: Unify error codes by replacing -ENOTSUPP with -EOPNOTSUPP"), our SPI NOR flashes would stop probing with the following visible in the kernel log:

[    2.196300] brcmstb_qspi f0440920.qspi: using bspi-mspi mode
[    2.210295] spi-nor: probe of spi1.0 failed with error -95

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/1] spi: Fix error code checking in spi_mem_exec_op()

      commit: 29895ce18311ddd702973ddb3a6c687db663e0fb

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark