Convert fs drivers to ->read_iter()
Subsystems (2)
cover Convert fs drivers to ->read_iter()
Hi,
There are still a few users of fops->read() in the core parts of the fs stack. Which is a shame, since it'd be nice to get rid of the non-iterator parts of down the line, and reclaim that part of the file_operations struct.
Outside of moving in that direction as a cleanup, using ->read_iter() enables us to mark them with FMODE_NOWAIT. This is important for users like io_uring, where per-IO nonblocking hints make a difference in how efficiently IO can be done.
Those two things are my main motivation for starting this work, with hopefully more to come down the line.
All patches have been booted and tested, and the corresponding test cases been run. The timerfd one was sent separately previously, figured I'd do a few more and make a smaller series out of it.
Signature · 1 line
Jens Axboe
PATCH 1/3 timerfd: convert to ->read_iter()
Switch timerfd to using fops->read_iter(), so it can support not just O_NONBLOCK but IOCB_NOWAIT as well. With the latter, users like io_uring interact with timerfds a lot better, as they can be driven purely by the poll trigger.
Manually get and install the required fd, so that FMODE_NOWAIT can be set before the file is installed into the file table.
No functional changes intended in this patch, it's purely a straight conversion to using the read iterator method.
--- fs/timerfd.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
fs/timerfd.c +22 -9
@@ -262,17 +262,18 @@ static __poll_t timerfd_poll(struct file *file, poll_table *wait)return events; } -static ssize_t timerfd_read (struct file *file,char __user *buf,size_t count, -loff_t *ppos) +static ssize_t timerfd_read_iter (struct kiocb *iocb,struct iov_iter *to) { +struct file *file = iocb->ki_filp;struct timerfd_ctx *ctx = file->private_data;ssize_t res;u64 ticks =0 ; -if (count <sizeof (ticks)) +if (iov_iter_count (to) <sizeof (ticks))return -EINVAL ; +spin_lock_irq (&ctx->wqh.lock); -if (file->f_flags &O_NONBLOCK ) +if (file->f_flags &O_NONBLOCK || iocb->ki_flags &IOCB_NOWAIT ) res = -EAGAIN ;else res =wait_event_interruptible_locked_irq (ctx->wqh, ctx->ticks);
@@ -313,7 +314,7 @@ static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, }spin_unlock_irq (&ctx->wqh.lock);if (ticks) - res =put_user (ticks, (u64 __user *) buf) ? -EFAULT :sizeof (ticks); + res =copy_to_iter (&ticks,sizeof (ticks), to);return res; }
@@ -384,7 +385,7 @@ static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long argstatic const struct file_operations timerfd_fops = { .release = timerfd_release, .poll = timerfd_poll, - .read = timerfd_read, + .read_iter = timerfd_read_iter, .llseek = noop_llseek, .show_fdinfo = timerfd_show, .unlocked_ioctl = timerfd_ioctl,
@@ -407,6 +408,7 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags) {int ufd;struct timerfd_ctx *ctx; +struct file *file;/* Check the TFD_* constants for consistency. */ BUILD_BUG_ON (TFD_CLOEXEC !=O_CLOEXEC );
@@ -443,11 +445,22 @@ SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags) ctx->moffs =ktime_mono_to_real (0 ); - ufd =anon_inode_getfd ("[timerfd]" , &timerfd_fops, ctx, -O_RDWR | (flags &TFD_SHARED_FCNTL_FLAGS )); -if (ufd <0 ) + ufd =get_unused_fd_flags (O_RDWR | (flags &TFD_SHARED_FCNTL_FLAGS )); +if (ufd <0 ) {kfree (ctx); +return ufd; + } + + file =anon_inode_getfile ("[timerfd]" , &timerfd_fops, ctx, +O_RDWR | (flags &TFD_SHARED_FCNTL_FLAGS )); +if (IS_ERR (file)) { +put_unused_fd (ufd); +kfree (ctx); +return PTR_ERR (file); + } + file->f_mode |=FMODE_NOWAIT ; +fd_install (ufd, file);return ufd; }
Signature · 1 line
2.43.0
PATCH 2/3 userfaultfd: convert to ->read_iter()
In reply to Jens AxboeRather than use the older style ->read() hook, use ->read_iter() so that userfaultfd can support both O_NONBLOCK and IOCB_NOWAIT for non-blocking read attempts.
Split the fd setup into two parts, so that userfaultfd can mark the file mode with FMODE_NOWAIT before installing it into the process table. With that, we can also defer grabbing the mm until we know the rest will succeed, as the fd isn't visible before then.
--- fs/userfaultfd.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-)
fs/userfaultfd.c +26 -16
@@ -282,7 +282,7 @@ static inline bool userfaultfd_huge_must_wait(struct userfaultfd_ctx *ctx,/* * Verify the pagetables are still not ok after having reigstered into * the fault_pending_wqh to avoid userland having to UFFDIO_WAKE any -* userfault that has already been resolved, if userfaultfd_read and +* userfault that has already been resolved, if userfaultfd_read_iter and * UFFDIO_COPY|ZEROPAGE are being run simultaneously on two different * threads. */
@@ -1177,34 +1177,34 @@ static ssize_t userfaultfd_ctx_read(struct userfaultfd_ctx *ctx, int no_wait,return ret; } -static ssize_t userfaultfd_read (struct file *file,char __user *buf, -size_t count,loff_t *ppos) +static ssize_t userfaultfd_read_iter (struct kiocb *iocb,struct iov_iter *to) { +struct file *file = iocb->ki_filp;struct userfaultfd_ctx *ctx = file->private_data;ssize_t _ret, ret =0 ;struct uffd_msg msg; -int no_wait = file->f_flags &O_NONBLOCK ;struct inode *inode =file_inode (file); +bool no_wait;if (!userfaultfd_is_initialized (ctx))return -EINVAL ; + no_wait = file->f_flags &O_NONBLOCK || iocb->ki_flags &IOCB_NOWAIT ;for (;;) { -if (count <sizeof (msg)) +if (iov_iter_count (to) <sizeof (msg))return ret ? ret : -EINVAL ; _ret =userfaultfd_ctx_read (ctx, no_wait, &msg, inode);if (_ret <0 )return ret ? ret : _ret; -if (copy_to_user ((__u64 __user *) buf, &msg,sizeof (msg))) + _ret =copy_to_iter (&msg,sizeof (msg), to); +if (_ret <0 )return ret ? ret : -EFAULT ; ret +=sizeof (msg); - buf +=sizeof (msg); - count -=sizeof (msg);/* * Allow to read more than one fault at time but only * block if waiting for the very first one. */ - no_wait =O_NONBLOCK ; + no_wait = true; } }
@@ -2172,7 +2172,7 @@ static const struct file_operations userfaultfd_fops = {#endif .release = userfaultfd_release, .poll = userfaultfd_poll, - .read = userfaultfd_read, + .read_iter = userfaultfd_read_iter, .unlocked_ioctl = userfaultfd_ioctl, .compat_ioctl = compat_ptr_ioctl, .llseek = noop_llseek,
@@ -2192,6 +2192,7 @@ static void init_once_userfaultfd_ctx(void *mem)static int new_userfaultfd (int flags) {struct userfaultfd_ctx *ctx; +struct file *file;int fd;BUG_ON (!current->mm);
@@ -2215,16 +2216,25 @@ static int new_userfaultfd(int flags)init_rwsem (&ctx->map_changing_lock);atomic_set (&ctx->mmap_changing,0 ); ctx->mm = current->mm; -/* prevent the mm struct to be freed */ -mmgrab (ctx->mm); + + fd =get_unused_fd_flags (O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS )); +if (fd <0 ) + goto err_out;/* Create a new inode so that the LSM can block the creation. */ - fd =anon_inode_create_getfd ("[userfaultfd]" , &userfaultfd_fops, ctx, + file =anon_inode_create_getfile ("[userfaultfd]" , &userfaultfd_fops, ctx,O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS ),NULL ); -if (fd <0 ) { -mmdrop (ctx->mm); -kmem_cache_free (userfaultfd_ctx_cachep, ctx); +if (IS_ERR (file)) { + fd =PTR_ERR (file); + goto err_out; } +/* prevent the mm struct to be freed */ +mmgrab (ctx->mm); + file->f_mode |=FMODE_NOWAIT ; +fd_install (fd, file); +return fd; +err_out: +kmem_cache_free (userfaultfd_ctx_cachep, ctx);return fd; }
Signature · 1 line
2.43.0
Christian Brauner
maintainerRe: [PATCH 2/3] userfaultfd: convert to ->read_iter()
Quoted 98 lines · Jens Axboe
Rather than use the older style ->read() hook, use ->read_iter() so that userfaultfd can support both
O_NONBLOCKandIOCB_NOWAITfor non-blocking read attempts.Split the fd setup into two parts, so that userfaultfd can mark the file mode with
FMODE_NOWAITbefore installing it into the process table. With that, we can also defer grabbing the mm until we know the rest will succeed, as the fd isn't visible before then.Signed-off-by Jens Axboe <[email protected]>--- fs/userfaultfd.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-)fs/userfaultfd.c +15
-12@@ -282,7 +282,7 @@ static inline bool userfaultfd_huge_must_wait(struct userfaultfd_ctx *ctx,/* * Verify the pagetables are still not ok after having reigstered into * the fault_pending_wqh to avoid userland having to UFFDIO_WAKE any -* userfault that has already been resolved, if userfaultfd_read and +* userfault that has already been resolved, if userfaultfd_read_iter and * UFFDIO_COPY|ZEROPAGE are being run simultaneously on two different * threads. */ @@ -1177,34 +1177,34 @@ static ssize_t userfaultfd_ctx_read(struct userfaultfd_ctx *ctx, int no_wait,return ret; } -static ssize_t userfaultfd_read (struct file *file,char __user *buf, -size_t count,loff_t *ppos) +static ssize_t userfaultfd_read_iter (struct kiocb *iocb,struct iov_iter *to) { +struct file *file = iocb->ki_filp;struct userfaultfd_ctx *ctx = file->private_data;ssize_t _ret, ret =0 ;struct uffd_msg msg; -int no_wait = file->f_flags &O_NONBLOCK ;struct inode *inode =file_inode (file); +bool no_wait;if (!userfaultfd_is_initialized (ctx))return -EINVAL ; + no_wait = file->f_flags &O_NONBLOCK || iocb->ki_flags &IOCB_NOWAIT ;for (;;) { -if (count <sizeof (msg)) +if (iov_iter_count (to) <sizeof (msg))return ret ? ret : -EINVAL ; _ret =userfaultfd_ctx_read (ctx, no_wait, &msg, inode);if (_ret <0 )return ret ? ret : _ret; -if (copy_to_user ((__u64 __user *) buf, &msg,sizeof (msg))) + _ret =copy_to_iter (&msg,sizeof (msg), to); +if (_ret <0 )return ret ? ret : -EFAULT ; ret +=sizeof (msg); - buf +=sizeof (msg); - count -=sizeof (msg);/* * Allow to read more than one fault at time but only * block if waiting for the very first one. */ - no_wait =O_NONBLOCK ; + no_wait = true; } }@@ -2172,7 +2172,7 @@ static const struct file_operations userfaultfd_fops = {#endif .release = userfaultfd_release, .poll = userfaultfd_poll, - .read = userfaultfd_read, + .read_iter = userfaultfd_read_iter, .unlocked_ioctl = userfaultfd_ioctl, .compat_ioctl = compat_ptr_ioctl, .llseek = noop_llseek,@@ -2192,6 +2192,7 @@ static void init_once_userfaultfd_ctx(void *mem)static int new_userfaultfd (int flags) {struct userfaultfd_ctx *ctx; +struct file *file;int fd;BUG_ON (!current->mm);@@ -2215,16 +2216,25 @@ static int new_userfaultfd(int flags)init_rwsem (&ctx->map_changing_lock);atomic_set (&ctx->mmap_changing,0 ); ctx->mm = current->mm; -/* prevent the mm struct to be freed */ -mmgrab (ctx->mm); + + fd =get_unused_fd_flags (O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS )); +if (fd <0 ) + goto err_out;
fs/userfaultfd.c static int new_userfaultfd(int flags) · line 2229
Quoted 10 lines
fs/userfaultfd.c +4
-4/* Create a new inode so that the LSM can block the creation. */ - fd =anon_inode_create_getfd ("[userfaultfd]" , &userfaultfd_fops, ctx, + file =anon_inode_create_getfile ("[userfaultfd]" , &userfaultfd_fops, ctx,O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS ),NULL ); -if (fd <0 ) { -mmdrop (ctx->mm); -kmem_cache_free (userfaultfd_ctx_cachep, ctx); +if (IS_ERR (file)) { + fd =PTR_ERR (file); + goto err_out;
You're leaking the fd you allocated above.
Quoted 14 lines
fs/userfaultfd.c +7
-0} +/* prevent the mm struct to be freed */ +mmgrab (ctx->mm); + file->f_mode |=FMODE_NOWAIT ; +fd_install (fd, file); +return fd; +err_out: +kmem_cache_free (userfaultfd_ctx_cachep, ctx);return fd; }Signature · 1 line
2.43.0
Re: [PATCH 2/3] userfaultfd: convert to ->read_iter()
Quoted 11 lines · Christian Brauner
Quoted 11 lines
fs/userfaultfd.c +4
-2@@ -2215,16 +2216,25 @@ static int new_userfaultfd(int flags)init_rwsem (&ctx->map_changing_lock);atomic_set (&ctx->mmap_changing,0 ); ctx->mm = current->mm; -/* prevent the mm struct to be freed */ -mmgrab (ctx->mm); + + fd =get_unused_fd_flags (O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS )); +if (fd <0 ) + goto err_out;
Quoted 12 lines
fs/userfaultfd.c static int new_userfaultfd(int flags) · line 2229
Quoted 10 lines
fs/userfaultfd.c +4
-4/* Create a new inode so that the LSM can block the creation. */ - fd =anon_inode_create_getfd ("[userfaultfd]" , &userfaultfd_fops, ctx, + file =anon_inode_create_getfile ("[userfaultfd]" , &userfaultfd_fops, ctx,O_RDONLY | (flags &UFFD_SHARED_FCNTL_FLAGS ),NULL ); -if (fd <0 ) { -mmdrop (ctx->mm); -kmem_cache_free (userfaultfd_ctx_cachep, ctx); +if (IS_ERR (file)) { + fd =PTR_ERR (file); + goto err_out;You're leaking the fd you allocated above.
Oops yes - thanks, fixed.
Signature · 1 line
Jens Axboe
PATCH 3/3 signalfd: convert to ->read_iter()
In reply to Jens AxboeRather than use the older style ->read() hook, use ->read_iter() so that signalfd can support both O_NONBLOCK and IOCB_NOWAIT for non-blocking read attempts.
Split the fd setup into two parts, so that signalfd can mark the file mode with FMODE_NOWAIT before installing it into the process table.
--- fs/signalfd.c | 44 ++++++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 16 deletions(-)
fs/signalfd.c +28 -16
@@ -68,8 +68,7 @@ static __poll_t signalfd_poll(struct file *file, poll_table *wait)/* * Copied from copy_siginfo_to_user() in kernel/signal.c */ -static int signalfd_copyinfo (struct signalfd_siginfo __user *uinfo, -kernel_siginfo_t const *kinfo) +static int signalfd_copyinfo (struct iov_iter *to,kernel_siginfo_t const *kinfo) {struct signalfd_siginfo new;
@@ -146,10 +145,7 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,break ; } -if (copy_to_user (uinfo, &new,sizeof (struct signalfd_siginfo ))) -return -EFAULT ; - -return sizeof (*uinfo); +return copy_to_iter (&new,sizeof (struct signalfd_siginfo ), to); } static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, kernel_siginfo_t *info,
@@ -199,25 +195,26 @@ static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, kernel_siginfo_t *info* error code. The "count" parameter must be at least the size of a * "struct signalfd_siginfo". */ -static ssize_t signalfd_read (struct file *file,char __user *buf,size_t count, -loff_t *ppos) +static ssize_t signalfd_read_iter (struct kiocb *iocb,struct iov_iter *to) { +struct file *file = iocb->ki_filp;struct signalfd_ctx *ctx = file->private_data;struct signalfd_siginfo __user *siginfo; -int nonblock = file->f_flags &O_NONBLOCK ; +size_t count =iov_iter_count (to);ssize_t ret, total =0 ;kernel_siginfo_t info; +bool nonblock; count /=sizeof (struct signalfd_siginfo );if (!count)return -EINVAL ; - siginfo = (struct signalfd_siginfo __user *) buf; + nonblock = file->f_flags &O_NONBLOCK || iocb->ki_flags &IOCB_NOWAIT ; do { ret = signalfd_dequeue(ctx, &info, nonblock); if (unlikely(ret <= 0)) break; - ret = signalfd_copyinfo(siginfo, &info); + ret = signalfd_copyinfo(to, &info); if (ret < 0) break; siginfo++;
@@ -246,7 +243,7 @@ static const struct file_operations signalfd_fops = {#endif .release = signalfd_release, .poll = signalfd_poll, - .read = signalfd_read, + .read_iter = signalfd_read_iter, .llseek = noop_llseek, };
@@ -265,20 +262,35 @@ static int do_signalfd4(int ufd, sigset_t *mask, int flags)signotset (mask);if (ufd ==-1 ) { +struct file *file; + ctx =kmalloc (sizeof (*ctx),GFP_KERNEL );if (!ctx)return -ENOMEM ; ctx->sigmask = *mask; + ufd =get_unused_fd_flags (O_RDWR | + (flags & (O_CLOEXEC |O_NONBLOCK ))); +if (ufd <0 ) { +kfree (ctx); +return ufd; + } + + file =anon_inode_getfile ("[signalfd]" , &signalfd_fops, ctx, +O_RDWR | (flags & (O_CLOEXEC |O_NONBLOCK ))); +if (IS_ERR (file)) { +put_unused_fd (ufd); +kfree (ctx); +return ufd; + } + file->f_mode |=FMODE_NOWAIT ; +/* * When we call this, the initialization must be complete, since * anon_inode_getfd() will install the fd. */ - ufd =anon_inode_getfd ("[signalfd]" , &signalfd_fops, ctx, -O_RDWR | (flags & (O_CLOEXEC |O_NONBLOCK ))); -if (ufd <0 ) -kfree (ctx); +fd_install (ufd, file); }else {struct fd f =fdget (ufd);if (!f.file)
Signature · 1 line
2.43.0