powerpc/mm: Align memory_limit value specified using mem= kernel parameter
PATCH 1/3 powerpc/mm: Align memory_limit value specified using mem= kernel parameter
The value specified for the memory limit is used to set a restriction on memory usage. It is important to ensure that this restriction is within the linear map kernel address space range. The hash page table translation uses a 16MB page size to map the kernel linear map address space. htab_bolt_mapping() function aligns down the size of the range while mapping kernel linear address space. Since the memblock limit is enforced very early during boot, before we can detect the type of memory translation (radix vs hash), we align the memory limit value specified as a kernel parameter to 16MB. This alignment value will work for both hash and radix translations.
--- arch/powerpc/kernel/prom.c | 7 +++++-- arch/powerpc/kernel/prom_init.c | 4 ++-- 2 files changed, 7 insertions(+), 4 deletions(-)
arch/powerpc/kernel/prom.c +5 -2
@@ -846,8 +846,11 @@ void __init early_init_devtree(void *params)reserve_crashkernel ();early_reserve_mem (); -/* Ensure that total memory size is page-aligned. */ - limit =ALIGN (memory_limit ?:memblock_phys_mem_size (),PAGE_SIZE ); +if (memory_limit >memblock_phys_mem_size ()) + memory_limit =0 ; + +/* Align down to 16 MB which is large page size with hash page translation */ + limit =ALIGN_DOWN (memory_limit ?:memblock_phys_mem_size (),SZ_16M );memblock_enforce_memory_limit (limit);#if defined(CONFIG_PPC_BOOK3S_64 ) && defined(CONFIG_PPC_4K_PAGES )
arch/powerpc/kernel/prom_init.c +2 -2
@@ -817,8 +817,8 @@ static void __init early_cmdline_parse(void) opt +=4 ; prom_memory_limit =prom_memparse (opt, (const char **)&opt);#ifdef CONFIG_PPC64 -/* Align to 16 MB == size of ppc64 large page */ - prom_memory_limit =ALIGN (prom_memory_limit,0x1000000 ); +/* Align down to 16 MB which is large page size with hash page translation */ + prom_memory_limit =ALIGN_DOWN (prom_memory_limit,SZ_16M );#endif }
base-commit: 3e92c1e6cd876754b64d1998ec0a01800ed954a6
Signature · 1 line
2.44.0
PATCH 2/3 powerpc/fadump: Don't update the user-specified memory limit
If the user specifies the memory limit, the kernel should honor it such that all allocation and reservations are made within the memory limit specified. fadump was breaking that rule. Remove the code which updates the memory limit such that fadump reservations are done within the limit specified.
--- arch/powerpc/kernel/fadump.c | 16 ---------------- 1 file changed, 16 deletions(-)
arch/powerpc/kernel/fadump.c +0 -16
@@ -573,22 +573,6 @@ int __init fadump_reserve_mem(void) } } -/* -* Calculate the memory boundary. -* If memory_limit is less than actual memory boundary then reserve -* the memory for fadump beyond the memory_limit and adjust the -* memory_limit accordingly, so that the running kernel can run with -* specified memory_limit. -*/ -if (memory_limit && memory_limit <memblock_end_of_DRAM ()) { - size =get_fadump_area_size (); -if ((memory_limit + size) <memblock_end_of_DRAM ()) - memory_limit += size; -else - memory_limit =memblock_end_of_DRAM (); -printk (KERN_INFO "Adjusted memory_limit for firmware-assisted" -" dump, now %#016llx\n" , memory_limit); - }if (memory_limit) mem_boundary = memory_limit;else
Signature · 1 line
2.44.0
PATCH 3/3 powerpc/mm: Update the memory limit based on direct mapping restrictions
In reply to Aneesh Kumar K.V (IBM)memory limit value specified by the user are further updated such that the value is 16MB aligned. This is because hash translation mode use 16MB as direct mapping page size. Make sure we update the global variable 'memory_limit' with the 16MB aligned value such that all kernel components will see the new aligned value of the memory limit.
--- arch/powerpc/kernel/prom.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
arch/powerpc/kernel/prom.c +2 -3
@@ -779,7 +779,6 @@ static inline void save_fscr_to_task(void) {}void __init early_init_devtree (void *params) { -phys_addr_t limit;DBG (" -> early_init_devtree(%px)\n" , params);
@@ -850,8 +849,8 @@ void __init early_init_devtree(void *params) memory_limit =0 ;/* Align down to 16 MB which is large page size with hash page translation */ - limit =ALIGN_DOWN (memory_limit ?:memblock_phys_mem_size (),SZ_16M ); -memblock_enforce_memory_limit (limit); + memory_limit =ALIGN_DOWN (memory_limit ?:memblock_phys_mem_size (),SZ_16M ); +memblock_enforce_memory_limit (memory_limit);#if defined(CONFIG_PPC_BOOK3S_64 ) && defined(CONFIG_PPC_4K_PAGES )if (!early_radix_enabled ())
Signature · 1 line
2.44.0
Quoted 3 lines · Joel Savitz
Acked-by Joel Savitz <[email protected]>
Hi,
What is the status of this? This patch fixes a bug where a powerpc machine hangs at boot when passed an unaligned value in the mem= kernel parameter.
Best,
Joel Savitz
Michael Ellerman
reviewerQuoted 10 lines · Joel Savitz
Quoted 3 lines · Joel Savitz
Acked-by Joel Savitz <[email protected]>Hi,
What is the status of this? This patch fixes a bug where a powerpc machine hangs at boot when passed an unaligned value in the mem= kernel parameter.
It's in linux-next for v6.10
cheers
Michael Ellerman
AppliedQuoted 11 lines · Aneesh Kumar K.V (IBM)
The value specified for the memory limit is used to set a restriction on memory usage. It is important to ensure that this restriction is within the linear map kernel address space range. The hash page table translation uses a 16MB page size to map the kernel linear map address space.
htab_bolt_mapping()function aligns down the size of the range while mapping kernel linear address space. Since the memblock limit is enforced very early during boot, before we can detect the type of memory translation (radix vs hash), we align the memory limit value specified as a kernel parameter to 16MB. This alignment value will work for both hash and radix translations.
Quoted 1 line
[...]
Applied to powerpc/next.
[1/3] powerpc/mm: Align memory_limit value specified using mem= kernel parameter
https://git.kernel.org/powerpc/c/5ca096161cdccfa328acf6704a4615528471d309 [2/3] powerpc/fadump: Don't update the user-specified memory limit https://git.kernel.org/powerpc/c/f94f5ac07983cb53de0c964f5428366c19e81993 [3/3] powerpc/mm: Update the memory limit based on direct mapping restrictions https://git.kernel.org/powerpc/c/5a799af9522641517f6d871d9f56e2658ee7db58
cheers
Quoted 9 lines · Michael Ellerman
Quoted 7 lines · Joel Savitz
Quoted 3 lines · Joel Savitz
Acked-by Joel Savitz <[email protected]>Hi,
Quoted 8 lines
Quoted 3 lines
What is the status of this? This patch fixes a bug where a powerpc machine hangs at boot when passed an unaligned value in the mem= kernel parameter.
It's in linux-next for v6.10
cheers
Thanks!
Best,
Joel Savitz