Skip to contentSkip to conversation

README.md: Add libmount to list of build prerequisites

PATCH In review Glenn Washburn 2 participants 2 messages Apr 5, 2024 Device mapper

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 README.md: Add libmount to list of build prerequisites

On Debian based systems the libmount development package (ie. libmount-dev) is required to build. Add it to the list in the README.md.

---
 README.md | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
README.md +4 -4
index d4f35f57c61f..898ea56e9bbd 100644
@@ -45,10 +45,10 @@ Select a release-tag and then click on "zip" or "tar.gz".
 Building multipath-tools
 ========================
 
-Prerequisites: development packages of for `libdevmapper`, `libaio`, `libudev`,
-`libjson-c`, `liburcu`, and `libsystemd`. If commandline editing is enabled
-(see below), the development package for either `libedit` or `libreadline` is
-required as well.
+Prerequisites: development packages of for `libdevmapper`, `libmount`, `libaio`,
+`libudev`, `libjson-c`, `liburcu`, and `libsystemd`. If commandline editing is
+enabled (see below), the development package for either `libedit` or
+`libreadline` is required as well.
 
 Then, build and install multipath-tools with:
 
Signature · 1 line
2.34.1