f2fs: fix zoned block device information initialization
Chao Yu
maintainerPATCH v7 1/1 f2fs: fix zoned block device information initialization
From: Wenjie Qi <[email protected]>
If the max open zones of zoned devices are less than the active logs of F2FS, the device may error due to insufficient zone resources when multiple active logs are being written at the same time.
---
v7:
- check f2fs_sb_has_blkzoned() instead of multiple-device condition in f2fs_remount().
fs/f2fs/f2fs.h | 1 + fs/f2fs/super.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+)
fs/f2fs/f2fs.h +1 -0
@@ -1559,6 +1559,7 @@ struct f2fs_sb_info {#ifdef CONFIG_BLK_DEV_ZONED unsigned int blocks_per_blkz;/* F2FS blocks per zone */ +unsigned int max_open_zones;/* max open zone resources of the zoned device */ #endif /* for node-related operations */
fs/f2fs/super.c +27 -0
@@ -2324,6 +2324,17 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)if (err) goto restore_opts; +#ifdef CONFIG_BLK_DEV_ZONED +if (f2fs_sb_has_blkzoned (sbi) && + sbi->max_open_zones <F2FS_OPTION (sbi).active_logs) { +f2fs_err (sbi, +"zoned: max open zones %u is too small, need at least %u open zones" , + sbi->max_open_zones,F2FS_OPTION (sbi).active_logs); + err = -EINVAL ; + goto restore_opts; + } +#endif +/* flush outstanding errors before changing fs state */ flush_work (&sbi->s_error_work);
@@ -3866,11 +3877,24 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)sector_t nr_sectors =bdev_nr_sectors (bdev);struct f2fs_report_zones_args rep_zone_arg;u64 zone_sectors; +unsigned int max_open_zones;int ret;if (!f2fs_sb_has_blkzoned (sbi))return 0 ; +if (bdev_is_zoned (FDEV (devi).bdev)) { + max_open_zones =bdev_max_open_zones (bdev); +if (max_open_zones && (max_open_zones < sbi->max_open_zones)) + sbi->max_open_zones = max_open_zones; +if (sbi->max_open_zones <F2FS_OPTION (sbi).active_logs) { +f2fs_err (sbi, +"zoned: max open zones %u is too small, need at least %u open zones" , + sbi->max_open_zones,F2FS_OPTION (sbi).active_logs); +return -EINVAL ; + } + } + zone_sectors =bdev_zone_sectors (bdev);if (sbi->blocks_per_blkz && sbi->blocks_per_blkz !=SECTOR_TO_BLOCK (zone_sectors))
@@ -4191,6 +4215,9 @@ static int f2fs_scan_devices(struct f2fs_sb_info *sbi) logical_blksize =bdev_logical_block_size (sbi->sb->s_bdev); sbi->aligned_blksize = true; +#ifdef CONFIG_BLK_DEV_ZONED + sbi->max_open_zones =UINT_MAX ; +#endif for (i =0 ; i < max_devices; i++) {if (i ==0 )
Signature · 1 line
2.40.1
Quoted 88 lines · Chao Yu
From: Wenjie Qi <[email protected]>
If the max open zones of zoned devices are less than the active logs of F2FS, the device may error due to insufficient zone resources when multiple active logs are being written at the same time.
Signed-off-by Wenjie Qi <[email protected]>Signed-off-by Chao Yu <[email protected]>---
v7:
- checkf2fs_sb_has_blkzoned()instead of multiple-device condition inf2fs_remount().fs/f2fs/f2fs.h | 1 + fs/f2fs/super.c | 27 +++++++++++++++++++++++++++ 2 files changed, 28 insertions(+)fs/f2fs/f2fs.h +1
-0@@ -1559,6 +1559,7 @@ struct f2fs_sb_info {#ifdef CONFIG_BLK_DEV_ZONED unsigned int blocks_per_blkz;/* F2FS blocks per zone */ +unsigned int max_open_zones;/* max open zone resources of the zoned device */ #endif /* for node-related operations */ fs/f2fs/super.c +27
-1@@ -2324,6 +2324,17 @@ static int f2fs_remount(struct super_block *sb, int *flags, char *data)if (err) goto restore_opts; +#ifdef CONFIG_BLK_DEV_ZONED +if (f2fs_sb_has_blkzoned (sbi) && + sbi->max_open_zones <F2FS_OPTION (sbi).active_logs) { +f2fs_err (sbi, +"zoned: max open zones %u is too small, need at least %u open zones" , + sbi->max_open_zones,F2FS_OPTION (sbi).active_logs); + err = -EINVAL ; + goto restore_opts; + } +#endif +/* flush outstanding errors before changing fs state */ flush_work (&sbi->s_error_work);@@ -3866,11 +3877,24 @@ static int init_blkz_info(struct f2fs_sb_info *sbi, int devi)sector_t nr_sectors =bdev_nr_sectors (bdev);struct f2fs_report_zones_args rep_zone_arg;u64 zone_sectors; +unsigned int max_open_zones;int ret;if (!f2fs_sb_has_blkzoned (sbi))return 0 ; +if (bdev_is_zoned (FDEV (devi).bdev)) { + max_open_zones =bdev_max_open_zones (bdev); +if (max_open_zones && (max_open_zones < sbi->max_open_zones)) + sbi->max_open_zones = max_open_zones; +if (sbi->max_open_zones <F2FS_OPTION (sbi).active_logs) { +f2fs_err (sbi, +"zoned: max open zones %u is too small, need at least %u open zones" , + sbi->max_open_zones,F2FS_OPTION (sbi).active_logs); +return -EINVAL ; + } + } + zone_sectors =bdev_zone_sectors (bdev);if (sbi->blocks_per_blkz && sbi->blocks_per_blkz !=SECTOR_TO_BLOCK (zone_sectors))@@ -4191,6 +4215,9 @@ static int f2fs_scan_devices(struct f2fs_sb_info *sbi) logical_blksize =bdev_logical_block_size (sbi->sb->s_bdev); sbi->aligned_blksize = true; +#ifdef CONFIG_BLK_DEV_ZONED + sbi->max_open_zones =UINT_MAX ; +#endif for (i =0 ; i < max_devices; i++) {if (i ==0 ) --
Quoted 3 lines
2.40.1
Quoted 5 lines
_______________________________________________
Linux-f2fs-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel
This patch was applied to jaegeuk/f2fs.git (dev) by Jaegeuk Kim <[email protected]>:
Hello:
This patch was applied to jaegeuk/f2fs.git (dev)
by Jaegeuk Kim <[email protected]>:
Quoted 8 lines · On Sun, 7 Apr 2024 15:21:23 +0800 you wrote:
From: Wenjie Qi <[email protected]>
If the max open zones of zoned devices are less than the active logs of F2FS, the device may error due to insufficient zone resources when multiple active logs are being written at the same time.
[...]
Here is the summary with links:
- [f2fs-dev,v7] f2fs: fix zoned block device information initialization
https://git.kernel.org/jaegeuk/f2fs/c/0f9b12142be1
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html