uio: pruss: Remove this driver
PATCH v2 1/1 uio: pruss: Remove this driver
This UIO driver was used to control the PRU processors found on various TI SoCs. It was created before the Remoteproc framework, but now with that we have a standard way to program and manage the PRU processors. The proper PRU Remoteproc driver should be used instead of this driver.
This driver only supported the original class of PRUSS (OMAP-L1xx / AM17xx / AM18xx / TMS320C674x / DA8xx) but when these platforms were switched to use Device Tree the support for DT was not added to this driver and so it is now unused/unusable. Support for these platforms can be added to the proper PRU Remoteproc driver if ever needed.
Remove this driver.
---
Changes for v2:
- Simply remove the whole driver as discussed here[0]
[0] https://lore.kernel.org/lkml/[email protected]/T/
drivers/uio/Kconfig | 18 -- drivers/uio/Makefile | 1 - drivers/uio/uio_pruss.c | 255 ------------------------ include/linux/platform_data/uio_pruss.h | 18 -- 4 files changed, 292 deletions(-) delete mode 100644 drivers/uio/uio_pruss.c delete mode 100644 include/linux/platform_data/uio_pruss.h
drivers/uio/Kconfig +0 -18
@@ -125,24 +125,6 @@ config UIO_FSL_ELBC_GPCM_NETX5152 Information about this hardware can be found at: http://www.hilscher.com/netx -config UIO_PRUSS - tristate "Texas Instruments PRUSS driver" - select GENERIC_ALLOCATOR - depends on HAS_IOMEM && HAS_DMA - help - PRUSS driver for OMAPL138/DA850/AM18XX devices - PRUSS driver requires user space components, examples and user space - driver is available from below SVN repo - you may use anonymous login - - https://gforge.ti.com/gf/project/pru_sw/ - - More info on API is available at below wiki - - http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader - - To compile this driver as a module, choose M here: the module - will be called uio_pruss. - config UIO_MF624 tristate "Humusoft MF624 DAQ PCI card driver" depends on PCI
drivers/uio/Makefile +0 -1
@@ -7,7 +7,6 @@ obj-$(CONFIG_UIO_AEC) += uio_aec.o obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o obj-$(CONFIG_UIO_NETX) += uio_netx.o -obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o obj-$(CONFIG_UIO_MF624) += uio_mf624.o obj-$(CONFIG_UIO_FSL_ELBC_GPCM) += uio_fsl_elbc_gpcm.o obj-$(CONFIG_UIO_HV_GENERIC) += uio_hv_generic.o
drivers/uio/uio_pruss.c deleted +0 -255
255 lines not on this page · raw message
include/linux/platform_data/uio_pruss.h deleted +0 -18
@@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* -* include/linux/platform_data/uio_pruss.h -* -* Platform data for uio_pruss driver -* -* Copyright (C) 2010-11 Texas Instruments Incorporated - https://www.ti.com/ -*/ - -#ifndef _UIO_PRUSS_H_ -#define _UIO_PRUSS_H_ - -/* To configure the PRUSS INTC base offset for UIO driver */ -struct uio_pruss_pdata { -u32 pintc_base; -struct gen_pool *sram_pool; -}; -#endif /* _UIO_PRUSS_H_ */
Signature · 1 line
2.39.2