arm: mach-k3: am642: Fix reset for workaround errata ID i2331
Subsystems (2)
PATCH 1/1 arm: mach-k3: am642: Fix reset for workaround errata ID i2331
To workaround an issue in AM642 we reset the SoC in early boot. For that we first probed the sysreset driver by calling uclass_get_device(). The ti-sci sysreset driver is now probed during the ti-sci firmware probe. Update this call to probe the firmware driver which will then probe the sysreset driver allowing do_reset() to again function as expected.
--- arch/arm/mach-k3/am642_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-k3/am642_init.c +1 -1
@@ -226,7 +226,7 @@ void board_init_f(ulong dummy)* The warm reset realigns internal clocks and prevents the lockup from * happening. */ - ret =uclass_first_device_err (UCLASS_SYSRESET , &dev); + ret =uclass_get_device_by_driver (UCLASS_FIRMWARE ,DM_DRIVER_GET (ti_sci), &dev);if (ret)printf ("\n%s:uclass device error [%d]\n" ,__func__,ret);
Signature · 1 line
2.39.2
Am 18.04.24 um 19:58 schrieb Andrew Davis:
Quoted 9 lines
To workaround an issue in AM642 we reset the SoC in early boot. For that we first probed the sysreset driver by calling
uclass_get_device(). The ti-sci sysreset driver is now probed during the ti-sci firmware probe. Update this call to probe the firmware driver which will then probe the sysreset driver allowingdo_reset()to again function as expected.Reported-by Jonathan Humphreys <[email protected]>Fixes fc5d40283483 ("firmware: ti_sci: Bind sysreset driver when enabled")Signed-off-by Andrew Davis <[email protected]>
on phycore-am64x
Quoted 17 lines
--- arch/arm/mach-k3/am642_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-k3/am642_init.c +1
-1@@ -226,7 +226,7 @@ void board_init_f(ulong dummy)* The warm reset realigns internal clocks and prevents the lockup from * happening. */ - ret =uclass_first_device_err (UCLASS_SYSRESET , &dev); + ret =uclass_get_device_by_driver (UCLASS_FIRMWARE ,DM_DRIVER_GET (ti_sci), &dev);if (ret)printf ("\n%s:uclass device error [%d]\n" ,__func__,ret);
Quoted 28 lines · Andrew Davis
To workaround an issue in AM642 we reset the SoC in early boot. For that we first probed the sysreset driver by calling
uclass_get_device(). The ti-sci sysreset driver is now probed during the ti-sci firmware probe. Update this call to probe the firmware driver which will then probe the sysreset driver allowingdo_reset()to again function as expected.Reported-by Jonathan Humphreys <[email protected]>Fixes fc5d40283483 ("firmware: ti_sci: Bind sysreset driver when enabled")Signed-off-by Andrew Davis <[email protected]>--- arch/arm/mach-k3/am642_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-k3/am642_init.c +1
-1@@ -226,7 +226,7 @@ void board_init_f(ulong dummy)* The warm reset realigns internal clocks and prevents the lockup from * happening. */ - ret =uclass_first_device_err (UCLASS_SYSRESET , &dev); + ret =uclass_get_device_by_driver (UCLASS_FIRMWARE ,DM_DRIVER_GET (ti_sci), &dev);if (ret)printf ("\n%s:uclass device error [%d]\n" ,__func__,ret);Signature · 1 line
2.39.2
on am64x-evm
Quoted 8 lines · Andrew Davis
To workaround an issue in AM642 we reset the SoC in early boot. For that we first probed the sysreset driver by calling
uclass_get_device(). The ti-sci sysreset driver is now probed during the ti-sci firmware probe. Update this call to probe the firmware driver which will then probe the sysreset driver allowingdo_reset()to again function as expected.[...]
Applied to u-boot/master, thanks!
Signature · 1 line
Tom