Skip to contentSkip to conversation

tools/power turbostat: Fix added raw MSR output

PATCH In review Sasha Levin 2 participants 30 messages Apr 22, 2024 – Apr 23, 2024

Subsystems (17)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/29 tools/power turbostat: Fix added raw MSR output

From: Doug Smythies <[email protected]>

[ Upstream commit e5f4e68eed85fa8495d78cd966eecc2b27bb9e53 ]

When using --Summary mode, added MSRs in raw mode always print zeros. Print the actual register contents.

Example, with patch:

note the added column:
--add msr0x64f,u32,package,raw,REASON

Where:

0x64F is MSR_CORE_PERF_LIMIT_REASONS

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.00    4800    35      1.42    0.76    0x00000000
0.00    4801    34      1.42    0.76    0x00000000
80.08   4531    66      108.17  107.52  0x08000000
98.69   4530    66      133.21  132.54  0x08000000
99.28   4505    66      128.26  127.60  0x0c000400
99.65   4486    68      124.91  124.25  0x0c000400
99.63   4483    68      124.90  124.25  0x0c000400
79.34   4481    41      99.80   99.13   0x0c000000
0.00    4801    41      1.40    0.73    0x0c000000

Where, for the test processor (i5-10600K):

PKG Limit #1: 125.000 Watts, 8.000000 sec
MSR bit 26 = log; bit 10 = status

PKG Limit #2: 136.000 Watts, 0.002441 sec
MSR bit 27 = log; bit 11 = status

Example, without patch:

Busy%   Bzy_MHz PkgTmp  PkgWatt CorWatt     REASON
0.01    4800    35      1.43    0.77    0x00000000
0.00    4801    35      1.39    0.73    0x00000000
83.49   4531    66      112.71  112.06  0x00000000
98.69   4530    68      133.35  132.69  0x00000000
99.31   4500    67      127.96  127.30  0x00000000
99.63   4483    69      124.91  124.25  0x00000000
99.61   4481    69      124.90  124.25  0x00000000
99.61   4481    71      124.92  124.25  0x00000000
59.35   4479    42      75.03   74.37   0x00000000
0.00    4800    42      1.39    0.73    0x00000000
0.00    4801    42      1.42    0.76    0x00000000

c000000

[lenb: simplified patch to apply only to package scope]

---
 tools/power/x86/turbostat/turbostat.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +4 -3
index 785de89077de0..9602a4798f383 100644
@@ -1811,9 +1811,10 @@ int sum_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
 	average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status;
 
 	for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) {
-		if (mp->format == FORMAT_RAW)
-			continue;
-		average.packages.counter[i] += p->counter[i];
+		if ((mp->format == FORMAT_RAW) && (topo.num_packages == 0))
+			average.packages.counter[i] = p->counter[i];
+		else
+			average.packages.counter[i] += p->counter[i];
 	}
 	return 0;
 }
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/29 tools/power turbostat: Increase the limit for fd opened

From: Wyes Karny <[email protected]>

[ Upstream commit 3ac1d14d0583a2de75d49a5234d767e2590384dd ]

When running turbostat, a system with 512 cpus reaches the limit for maximum number of file descriptors that can be opened. To solve this problem, the limit is raised to 2^15, which is a large enough number.

Below data is collected from AMD server systems while running turbostat:

|-----------+-------------------------------|
| # of cpus | # of opened fds for turbostat |
|-----------+-------------------------------|
| 128       | 260                           |
|-----------+-------------------------------|
| 192       | 388                           |
|-----------+-------------------------------|
| 512       | 1028                          |
|-----------+-------------------------------|

So, the new max limit would be sufficient up to 2^14 cpus (but this also depends on how many counters are enabled).

---
 tools/power/x86/turbostat/turbostat.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
tools/power/x86/turbostat/turbostat.c +21 -0
index 9602a4798f383..5b892c53fc2c2 100644
@@ -53,6 +53,8 @@
 #define	NAME_BYTES 20
 #define PATH_BYTES 128
 
+#define MAX_NOFILE 0x8000
+
 enum counter_scope { SCOPE_CPU, SCOPE_CORE, SCOPE_PACKAGE };
 enum counter_type { COUNTER_ITEMS, COUNTER_CYCLES, COUNTER_SECONDS, COUNTER_USEC };
 enum counter_format { FORMAT_RAW, FORMAT_DELTA, FORMAT_PERCENT };
@@ -6719,6 +6721,22 @@ void cmdline(int argc, char **argv)
 	}
 }
 
+void set_rlimit(void)
+{
+	struct rlimit limit;
+
+	if (getrlimit(RLIMIT_NOFILE, &limit) < 0)
+		err(1, "Failed to get rlimit");
+
+	if (limit.rlim_max < MAX_NOFILE)
+		limit.rlim_max = MAX_NOFILE;
+	if (limit.rlim_cur < MAX_NOFILE)
+		limit.rlim_cur = MAX_NOFILE;
+
+	if (setrlimit(RLIMIT_NOFILE, &limit) < 0)
+		err(1, "Failed to set rlimit");
+}
+
 int main(int argc, char **argv)
 {
 	outf = stderr;
@@ -6731,6 +6749,9 @@ int main(int argc, char **argv)
 
 	probe_sysfs();
 
+	if (!getuid())
+		set_rlimit();
+
 	turbostat_init();
 
 	msr_sum_record();
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/29 tools/power turbostat: Fix Bzy_MHz documentation typo

In reply to Sasha Levin

From: Peng Liu <[email protected]>

[ Upstream commit 0b13410b52c4636aacb6964a4253a797c0fa0d16 ]

The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta The man page erroneously showed that TSC_delta was divided.

---
 tools/power/x86/turbostat/turbostat.8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.8 +1 -1
index 8f08c3fd498d5..1ba6340d3b3da 100644
@@ -370,7 +370,7 @@ below the processor's base frequency.
 
 Busy% = MPERF_delta/TSC_delta
 
-Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval
+Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval
 
 Note that these calculations depend on TSC_delta, so they
 are not reliable during intervals when TSC_MHz is not running at the base frequency.
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/29 tools/power turbostat: Print ucode revision only if valid

In reply to Sasha Levin

From: Patryk Wlazlyn <[email protected]>

[ Upstream commit fb5ceca046efc84f69fcf9779a013f8a0e63bbff ]

If the MSR read were to fail, turbostat would print "microcode 0x0"

---
 tools/power/x86/turbostat/turbostat.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
tools/power/x86/turbostat/turbostat.c +9 -3
index 5b892c53fc2c2..4dfeda4870f71 100644
@@ -5518,6 +5518,7 @@ void process_cpuid()
 	unsigned int eax, ebx, ecx, edx;
 	unsigned int fms, family, model, stepping, ecx_flags, edx_flags;
 	unsigned long long ucode_patch = 0;
+	bool ucode_patch_valid = false;
 
 	eax = ebx = ecx = edx = 0;
 
@@ -5547,6 +5548,8 @@ void process_cpuid()
 
 	if (get_msr(sched_getcpu(), MSR_IA32_UCODE_REV, &ucode_patch))
 		warnx("get_msr(UCODE)");
+	else
+		ucode_patch_valid = true;
 
 	/*
 	 * check max extended function levels of CPUID.
@@ -5557,9 +5560,12 @@ void process_cpuid()
 	__cpuid(0x80000000, max_extended_level, ebx, ecx, edx);
 
 	if (!quiet) {
-		fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d) microcode 0x%x\n",
-			family, model, stepping, family, model, stepping,
-			(unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+		fprintf(outf, "CPUID(1): family:model:stepping 0x%x:%x:%x (%d:%d:%d)",
+			family, model, stepping, family, model, stepping);
+		if (ucode_patch_valid)
+			fprintf(outf, " microcode 0x%x", (unsigned int)((ucode_patch >> 32) & 0xFFFFFFFF));
+		fputc('\n', outf);
+
 		fprintf(outf, "CPUID(0x80000000): max_extended_levels: 0x%x\n", max_extended_level);
 		fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n",
 			ecx_flags & (1 << 0) ? "SSE3" : "-",
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/29 tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read

In reply to Sasha Levin

From: Len Brown <[email protected]>

[ Upstream commit b6fe938317eed58e8c687bd5965a956e15fb5828 ]

Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat

This went unnoticed because this file is typically visible to root, and turbostat was typically run as root.

Going forward, when a non-root user can run turbostat... Complain about failed read access to this file only if --debug is used.

---
 tools/power/x86/turbostat/turbostat.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.c +2 -1
index 4dfeda4870f71..0561362301c53 100644
@@ -5479,7 +5479,8 @@ void print_dev_latency(void)
 
 	fd = open(path, O_RDONLY);
 	if (fd < 0) {
-		warnx("capget(CAP_SYS_ADMIN) failed, try \"# setcap cap_sys_admin=ep %s\"", progname);
+		if (debug)
+			warnx("Read %s failed", path);
 		return;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/29 btrfs: make btrfs_clear_delalloc_extent() free delalloc reserve

In reply to Sasha Levin

From: Boris Burkov <[email protected]>

[ Upstream commit 3c6f0c5ecc8910d4ffb0dfe85609ebc0c91c8f34 ]

Currently, this call site in btrfs_clear_delalloc_extent() only converts the reservation. We are marking it not delalloc, so I don't think it makes sense to keep the rsv around. This is a path where we are not sure to join a transaction, so it leads to incorrect free-ing during umount.

Helps with the pass rate of generic/269 and generic/475.

---
 fs/btrfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/inode.c +1 -1
index e57d18825a56e..cb66a890c1084 100644
@@ -2511,7 +2511,7 @@ void btrfs_clear_delalloc_extent(struct btrfs_inode *inode,
 		 */
 		if (bits & EXTENT_CLEAR_META_RESV &&
 		    root != fs_info->tree_root)
-			btrfs_delalloc_release_metadata(inode, len, false);
+			btrfs_delalloc_release_metadata(inode, len, true);
 
 		/* For sanity tests. */
 		if (btrfs_is_testing(fs_info))
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/29 btrfs: always clear PERTRANS metadata during commit

In reply to Sasha Levin

From: Boris Burkov <[email protected]>

[ Upstream commit 6e68de0bb0ed59e0554a0c15ede7308c47351e2d ]

It is possible to clear a root's IN_TRANS tag from the radix tree, but not clear its PERTRANS, if there is some error in between. Eliminate that possibility by moving the free up to where we clear the tag.

---
 fs/btrfs/transaction.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/btrfs/transaction.c +1 -1
index 457ec7d02a9ac..0548072c642fb 100644
@@ -1449,6 +1449,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			radix_tree_tag_clear(&fs_info->fs_roots_radix,
 					(unsigned long)root->root_key.objectid,
 					BTRFS_ROOT_TRANS_TAG);
+			btrfs_qgroup_free_meta_all_pertrans(root);
 			spin_unlock(&fs_info->fs_roots_radix_lock);
 
 			btrfs_free_log(trans, root);
@@ -1473,7 +1474,6 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans)
 			if (ret2)
 				return ret2;
 			spin_lock(&fs_info->fs_roots_radix_lock);
-			btrfs_qgroup_free_meta_all_pertrans(root);
 		}
 	}
 	spin_unlock(&fs_info->fs_roots_radix_lock);
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/29 memblock tests: fix undefined reference to `early_pfn_to_nid'

In reply to Sasha Levin

From: Wei Yang <[email protected]>

[ Upstream commit 7d8ed162e6a92268d4b2b84d364a931216102c8e ]

commit 6a9531c3a880 ("memblock: fix crash when reserved memory is not added to memory") introduce the usage of early_pfn_to_nid, which is not defined in memblock tests.

The original definition of early_pfn_to_nid is defined in mm.h, so let add this in the corresponding mm.h.

---
 tools/include/linux/mm.h | 5 +++++
 1 file changed, 5 insertions(+)
tools/include/linux/mm.h +5 -0
index f3c82ab5b14cd..7d73da0980473 100644
@@ -37,4 +37,9 @@ static inline void totalram_pages_add(long count)
 {
 }
 
+static inline int early_pfn_to_nid(unsigned long pfn)
+{
+	return 0;
+}
+
 #endif
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/29 memblock tests: fix undefined reference to `panic'

In reply to Sasha Levin

From: Wei Yang <[email protected]>

[ Upstream commit e0f5a8e74be88f2476e58b25d3b49a9521bdc4ec ]

commit e96c6b8f212a ("memblock: report failures when memblock_can_resize is not set") introduced the usage of panic, which is not defined in memblock test.

Let's define it directly in panic.h to fix it.

---
 tools/include/linux/kernel.h |  1 +
 tools/include/linux/panic.h  | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 tools/include/linux/panic.h
tools/include/linux/kernel.h +1 -0
index 4b0673bf52c2e..07cfad817d539 100644
@@ -8,6 +8,7 @@
 #include <linux/build_bug.h>
 #include <linux/compiler.h>
 #include <linux/math.h>
+#include <linux/panic.h>
 #include <endian.h>
 #include <byteswap.h>
 
tools/include/linux/panic.h new file +19 -0
new file mode 100644
index 0000000000000..9c8f17a41ce8e
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _TOOLS_LINUX_PANIC_H
+#define _TOOLS_LINUX_PANIC_H
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+static inline void panic(const char *fmt, ...)
+{
+	va_list argp;
+
+	va_start(argp, fmt);
+	vfprintf(stderr, fmt, argp);
+	va_end(argp);
+	exit(-1);
+}
+
+#endif
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 10/29 memblock tests: fix undefined reference to `BIT'

In reply to Sasha Levin

From: Wei Yang <[email protected]>

[ Upstream commit 592447f6cb3c20d606d6c5d8e6af68e99707b786 ]

commit 772dd0342727 ("mm: enumerate all gfp flags") define gfp flags with the help of BIT, while gfp_types.h doesn't include header file for the definition. This through an error on building memblock tests.

Let's include linux/bits.h to fix it.

---
 include/linux/gfp_types.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/gfp_types.h +2 -0
index 6583a58670c57..dfde1e1e321c3 100644
@@ -2,6 +2,8 @@
 #ifndef __LINUX_GFP_TYPES_H
 #define __LINUX_GFP_TYPES_H
 
+#include <linux/bits.h>
+
 /* The typedef is in types.h but we want the documentation here */
 #if 0
 /**
Signature · 1 line
2.43.0
author maintainer
#11 lore raw

PATCH 11/29 scsi: target: Fix SELinux error when systemd-modules loads the target module

In reply to Sasha Levin

From: Maurizio Lombardi <[email protected]>

[ Upstream commit 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 ]

If the systemd-modules service loads the target module, the credentials of that userspace process will be used to validate the access to the target db directory. SELinux will prevent it, reporting an error like the following:

kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read } for pid=1020 comm="systemd-modules" name="target" dev="dm-3" ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0 tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0

Fix the error by using the kernel credentials to access the db directory

---
 drivers/target/target_core_configfs.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/target/target_core_configfs.c +12 -0
index d5860c1c1f469..9a88774836c9d 100644
@@ -3634,6 +3634,8 @@ static int __init target_core_init_configfs(void)
 {
 	struct configfs_subsystem *subsys = &target_core_fabrics;
 	struct t10_alua_lu_gp *lu_gp;
+	struct cred *kern_cred;
+	const struct cred *old_cred;
 	int ret;
 
 	pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage"
@@ -3710,11 +3712,21 @@ static int __init target_core_init_configfs(void)
 	if (ret < 0)
 		goto out;
 
+	/* We use the kernel credentials to access the target directory */
+	kern_cred = prepare_kernel_cred(&init_task);
+	if (!kern_cred) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	old_cred = override_creds(kern_cred);
 	target_init_dbroot();
+	revert_creds(old_cred);
+	put_cred(kern_cred);
 
 	return 0;
 
 out:
+	target_xcopy_release_pt();
 	configfs_unregister_subsystem(subsys);
 	core_dev_release_virtual_lun0();
 	rd_module_exit();
Signature · 1 line
2.43.0
author maintainer
#12 lore raw

PATCH 12/29 scsi: hisi_sas: Handle the NCQ error returned by D2H frame

In reply to Sasha Levin

From: Xiang Chen <[email protected]>

[ Upstream commit 358e919a351f2ea4b412e7dac6b1c23ec10bd4f5 ]

We find that some disks use D2H frame instead of SDB frame to return NCQ error. Currently, only the I/O corresponding to the D2H frame is processed in this scenario, which does not meet the processing requirements of the NCQ error scenario. So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk in this scenario.

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +9 -1
index e914c0c13bb5b..6b97c066e6631 100644
@@ -2245,7 +2245,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task,
 	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 		if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) &&
 		    (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) {
-			ts->stat = SAS_PROTO_RESPONSE;
+			if (task->ata_task.use_ncq) {
+				struct domain_device *device = task->dev;
+				struct hisi_sas_device *sas_dev = device->lldd_dev;
+
+				sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR;
+				slot->abort = 1;
+			} else {
+				ts->stat = SAS_PROTO_RESPONSE;
+			}
 		} else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) {
 			ts->residual = trans_tx_fail_type;
 			ts->stat = SAS_DATA_UNDERRUN;
Signature · 1 line
2.43.0
author maintainer
#13 lore raw

PATCH 13/29 blk-iocost: avoid out of bounds shift

In reply to Sasha Levin

From: Rik van Riel <[email protected]>

[ Upstream commit beaa51b36012fad5a4d3c18b88a617aea7a9b96d ]

UBSAN catches undefined behavior in blk-iocost, where sometimes iocg->delay is shifted right by a number that is too large, resulting in undefined behavior on some architectures.

[  186.556576] ------------[ cut here ]------------
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1366:23
shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long')
CPU: 16 PID: 0 Comm: swapper/16 Tainted: G S          E    N 6.9.0-0_fbk700_debug_rc2_kbuilder_0_gc85af715cac0 #1
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A23 12/08/2020
Call Trace:
 <IRQ>
 dump_stack_lvl+0x8f/0xe0
 __ubsan_handle_shift_out_of_bounds+0x22c/0x280
 iocg_kick_delay+0x30b/0x310
 ioc_timer_fn+0x2fb/0x1f80
 __run_timer_base+0x1b6/0x250

...

Avoid that undefined behavior by simply taking the "delay = 0" branch if the shift is too large.

I am not sure what the symptoms of an undefined value delay will be, but I suspect it could be more than a little annoying to debug.

---
 block/blk-iocost.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
block/blk-iocost.c +4 -3
index 7ee8d85c2c68d..a382b3a39820a 100644
@@ -1347,7 +1347,7 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 {
 	struct ioc *ioc = iocg->ioc;
 	struct blkcg_gq *blkg = iocg_to_blkg(iocg);
-	u64 tdelta, delay, new_delay;
+	u64 tdelta, delay, new_delay, shift;
 	s64 vover, vover_pct;
 	u32 hwa;
 
@@ -1362,8 +1362,9 @@ static bool iocg_kick_delay(struct ioc_gq *iocg, struct ioc_now *now)
 
 	/* calculate the current delay in effect - 1/2 every second */
 	tdelta = now->now - iocg->delay_at;
-	if (iocg->delay)
-		delay = iocg->delay >> div64_u64(tdelta, USEC_PER_SEC);
+	shift = div64_u64(tdelta, USEC_PER_SEC);
+	if (iocg->delay && shift < BITS_PER_LONG)
+		delay = iocg->delay >> shift;
 	else
 		delay = 0;
 
Signature · 1 line
2.43.0
author maintainer
#14 lore raw

PATCH 14/29 gpu: host1x: Do not setup DMA for virtual devices

In reply to Sasha Levin

From: Thierry Reding <[email protected]>

[ Upstream commit 8ab58f6841b19423231c5db3378691ec80c778f8 ]

The host1x devices are virtual compound devices and do not perform DMA accesses themselves, so they do not need to be set up for DMA.

Ideally we would also not need to set up DMA masks for the virtual devices, but we currently still need those for legacy support on old hardware.

---
 drivers/gpu/host1x/bus.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/gpu/host1x/bus.c +0 -8
index 84d042796d2e6..3937889fa912d 100644
@@ -351,11 +351,6 @@ static int host1x_device_uevent(const struct device *dev,
 	return 0;
 }
 
-static int host1x_dma_configure(struct device *dev)
-{
-	return of_dma_configure(dev, dev->of_node, true);
-}
-
 static const struct dev_pm_ops host1x_device_pm_ops = {
 	.suspend = pm_generic_suspend,
 	.resume = pm_generic_resume,
@@ -369,7 +364,6 @@ struct bus_type host1x_bus_type = {
 	.name = "host1x",
 	.match = host1x_device_match,
 	.uevent = host1x_device_uevent,
-	.dma_configure = host1x_dma_configure,
 	.pm = &host1x_device_pm_ops,
 };
 
@@ -458,8 +452,6 @@ static int host1x_device_add(struct host1x *host1x,
 	device->dev.bus = &host1x_bus_type;
 	device->dev.parent = host1x->dev;
 
-	of_dma_configure(&device->dev, host1x->dev->of_node, true);
-
 	device->dev.dma_parms = &device->dma_parms;
 	dma_set_max_seg_size(&device->dev, UINT_MAX);
 
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH 15/29 MIPS: scall: Save thread_info.syscall unconditionally on entry

In reply to Sasha Levin

From: Jiaxun Yang <[email protected]>

[ Upstream commit 4370b673ccf240bf7587b0cb8e6726a5ccaf1f17 ]

thread_info.syscall is used by syscall_get_nr to supply syscall nr over a thread stack frame.

Previously, thread_info.syscall is only saved at syscall_trace_enter when syscall tracing is enabled. However rest of the kernel code do expect syscall_get_nr to be available without syscall tracing. The previous design breaks collect_syscall.

Move saving process to syscall entry to fix it.

---
 arch/mips/include/asm/ptrace.h |  2 +-
 arch/mips/kernel/asm-offsets.c |  1 +
 arch/mips/kernel/ptrace.c      | 15 ++++++---------
 arch/mips/kernel/scall32-o32.S | 23 +++++++++++++----------
 arch/mips/kernel/scall64-n32.S |  3 ++-
 arch/mips/kernel/scall64-n64.S |  3 ++-
 arch/mips/kernel/scall64-o32.S | 33 +++++++++++++++++----------------
 7 files changed, 42 insertions(+), 38 deletions(-)
arch/mips/include/asm/ptrace.h +1 -1
index d14d0e37ad02d..4a2b40ce39e09 100644
@@ -159,7 +159,7 @@ extern unsigned long exception_ip(struct pt_regs *regs);
 #define exception_ip(regs) exception_ip(regs)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void die(const char *, struct pt_regs *) __noreturn;
arch/mips/kernel/asm-offsets.c +1 -0
index d1b11f66f748f..cb1045ebab062 100644
@@ -101,6 +101,7 @@ void output_thread_info_defines(void)
 	OFFSET(TI_CPU, thread_info, cpu);
 	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
 	OFFSET(TI_REGS, thread_info, regs);
+	OFFSET(TI_SYSCALL, thread_info, syscall);
 	DEFINE(_THREAD_SIZE, THREAD_SIZE);
 	DEFINE(_THREAD_MASK, THREAD_MASK);
 	DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE);
arch/mips/kernel/ptrace.c +6 -9
index 59288c13b581b..61503a36067e9 100644
@@ -1317,16 +1317,13 @@ long arch_ptrace(struct task_struct *child, long request,
  * Notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
+asmlinkage long syscall_trace_enter(struct pt_regs *regs)
 {
 	user_exit();
 
-	current_thread_info()->syscall = syscall;
-
 	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
 		if (ptrace_report_syscall_entry(regs))
 			return -1;
-		syscall = current_thread_info()->syscall;
 	}
 
 #ifdef CONFIG_SECCOMP
@@ -1335,7 +1332,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		struct seccomp_data sd;
 		unsigned long args[6];
 
-		sd.nr = syscall;
+		sd.nr = current_thread_info()->syscall;
 		sd.arch = syscall_get_arch(current);
 		syscall_get_arguments(current, regs, args);
 		for (i = 0; i < 6; i++)
@@ -1345,23 +1342,23 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
 		ret = __secure_computing(&sd);
 		if (ret == -1)
 			return ret;
-		syscall = current_thread_info()->syscall;
 	}
 #endif
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
 		trace_sys_enter(regs, regs->regs[2]);
 
-	audit_syscall_entry(syscall, regs->regs[4], regs->regs[5],
+	audit_syscall_entry(current_thread_info()->syscall,
+			    regs->regs[4], regs->regs[5],
 			    regs->regs[6], regs->regs[7]);
 
 	/*
 	 * Negative syscall numbers are mistaken for rejected syscalls, but
 	 * won't have had the return value set appropriately, so we do so now.
 	 */
-	if (syscall < 0)
+	if (current_thread_info()->syscall < 0)
 		syscall_set_return_value(current, regs, -ENOSYS, 0);
-	return syscall;
+	return current_thread_info()->syscall;
 }
 
 /*
arch/mips/kernel/scall32-o32.S +13 -10
index 18dc9b3450561..2c604717e6308 100644
@@ -77,6 +77,18 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 */
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	and	t0, t1
@@ -114,16 +126,7 @@ syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
 
-	/*
-	 * syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 */
-	move	a1, v0
-	subu	t2, v0,  __NR_O32_Linux
-	bnez	t2, 1f /* __NR_syscall at offset 0 */
-	lw	a1, PT_R4(sp)
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
arch/mips/kernel/scall64-n32.S +2 -1
index 97456b2ca7dc3..97788859238c3 100644
@@ -44,6 +44,8 @@ NESTED(handle_sysn32, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -72,7 +74,6 @@ syscall_common:
 n32_syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
arch/mips/kernel/scall64-n64.S +2 -1
index e6264aa62e457..be11ea5cc67e0 100644
@@ -46,6 +46,8 @@ NESTED(handle_sys64, PT_SIZE, sp)
 
 	sd	a3, PT_R26(sp)		# save a3 for syscall restarting
 
+	LONG_S	v0, TI_SYSCALL($28)     # Store syscall number
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -82,7 +84,6 @@ n64_syscall_exit:
 syscall_trace_entry:
 	SAVE_STATIC
 	move	a0, sp
-	move	a1, v0
 	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
arch/mips/kernel/scall64-o32.S +17 -16
index d3c2616cba226..7a5abb73e5312 100644
@@ -79,6 +79,22 @@ loads_done:
 	PTR_WD	load_a7, bad_stack_a7
 	.previous
 
+	/*
+	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
+	 * where the real syscall number is in a0
+	 * note: NR_syscall is the first O32 syscall but the macro is
+	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
+	 * therefore __NR_O32_Linux is used (4000)
+	 */
+
+	subu	t2, v0,  __NR_O32_Linux
+	bnez	t2, 1f /* __NR_syscall at offset 0 */
+	LONG_S	a0, TI_SYSCALL($28)	# Save a0 as syscall number
+	b	2f
+1:
+	LONG_S	v0, TI_SYSCALL($28)	# Save v0 as syscall number
+2:
+
 	li	t1, _TIF_WORK_SYSCALL_ENTRY
 	LONG_L	t0, TI_FLAGS($28)	# syscall tracing enabled?
 	and	t0, t1, t0
@@ -113,22 +129,7 @@ trace_a_syscall:
 	sd	a7, PT_R11(sp)		# For indirect syscalls
 
 	move	a0, sp
-	/*
-	 * absolute syscall number is in v0 unless we called syscall(__NR_###)
-	 * where the real syscall number is in a0
-	 * note: NR_syscall is the first O32 syscall but the macro is
-	 * only defined when compiling with -mabi=32 (CONFIG_32BIT)
-	 * therefore __NR_O32_Linux is used (4000)
-	 */
-	.set	push
-	.set	reorder
-	subu	t1, v0,  __NR_O32_Linux
-	move	a1, v0
-	bnez	t1, 1f /* __NR_syscall at offset 0 */
-	ld	a1, PT_R4(sp) /* Arg1 for __NR_syscall case */
-	.set	pop
-
-1:	jal	syscall_trace_enter
+	jal	syscall_trace_enter
 
 	bltz	v0, 1f			# seccomp failed? Skip syscall
 
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 16/29 tools/power/turbostat: Fix uncore frequency file string

In reply to Sasha Levin

From: Justin Ernst <[email protected]>

[ Upstream commit 60add818ab2543b7e4f2bfeaacf2504743c1eb50 ]

Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory

We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/

The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used with each instance of reading uncore frequency files. uncore-frequency-common.c creates the sysfs directory with the format "package_%02d_die_%02d". Once the package value reaches double digits, the formats diverge.

Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".

[lenb: deleted the probe part of this patch, as it was already fixed]

---
 tools/power/x86/turbostat/turbostat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/power/x86/turbostat/turbostat.c +1 -1
index 0561362301c53..ffa964ddbacef 100644
@@ -1969,7 +1969,7 @@ unsigned long long get_uncore_mhz(int package, int die)
 {
 	char path[128];
 
-	sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_0%d_die_0%d/current_freq_khz", package,
+	sprintf(path, "/sys/devices/system/cpu/intel_uncore_frequency/package_%02d_die_%02d/current_freq_khz", package,
 		die);
 
 	return (snapshot_sysfs_counter(path) / 1000);
Signature · 1 line
2.43.0
author maintainer
#17 lore raw

PATCH 17/29 drm/amdgpu: Refine IB schedule error logging

In reply to Sasha Levin

From: Lijo Lazar <[email protected]>

[ Upstream commit 4b18a91faf1752f9bd69a4ed3aed2c8f6e5b0528 ]

Downgrade to debug information when IBs are skipped. Also, use dev_* to identify the device.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c +5 -2
index 78476bc75b4e1..de9d7f3dc2336 100644
@@ -300,12 +300,15 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job)
 		dma_fence_set_error(finished, -ECANCELED);
 
 	if (finished->error < 0) {
-		DRM_INFO("Skip scheduling IBs!\n");
+		dev_dbg(adev->dev, "Skip scheduling IBs in ring(%s)",
+			ring->name);
 	} else {
 		r = amdgpu_ib_schedule(ring, job->num_ibs, job->ibs, job,
 				       &fence);
 		if (r)
-			DRM_ERROR("Error scheduling IBs (%d)\n", r);
+			dev_err(adev->dev,
+				"Error scheduling IBs (%d) in ring(%s)", r,
+				ring->name);
 	}
 
 	job->job_run_counter++;
Signature · 1 line
2.43.0
author maintainer
#18 lore raw

PATCH 18/29 drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2

In reply to Sasha Levin

From: Tao Zhou <[email protected]>

[ Upstream commit f886b49feaae30acd599e37d4284836024b0f3ed ]

SDMA_CNTL is not set in some cases, driver configures it by itself.

v2: simplify code

---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)
drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c +3 -13
index f413898dda37d..7288bbdd1c264 100644
@@ -1612,19 +1612,9 @@ static int sdma_v4_4_2_set_ecc_irq_state(struct amdgpu_device *adev,
 	u32 sdma_cntl;
 
 	sdma_cntl = RREG32_SDMA(type, regSDMA_CNTL);
-	switch (state) {
-	case AMDGPU_IRQ_STATE_DISABLE:
-		sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA_CNTL,
-					  DRAM_ECC_INT_ENABLE, 0);
-		WREG32_SDMA(type, regSDMA_CNTL, sdma_cntl);
-		break;
-	/* sdma ecc interrupt is enabled by default
-	 * driver doesn't need to do anything to
-	 * enable the interrupt */
-	case AMDGPU_IRQ_STATE_ENABLE:
-	default:
-		break;
-	}
+	sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA_CNTL, DRAM_ECC_INT_ENABLE,
+					state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+	WREG32_SDMA(type, regSDMA_CNTL, sdma_cntl);
 
 	return 0;
 }
Signature · 1 line
2.43.0
author maintainer
#19 lore raw

PATCH 19/29 drm/amd/display: Skip on writeback when it's not applicable

In reply to Sasha Levin

From: Alex Hung <[email protected]>

[ Upstream commit ecedd99a9369fb5cde601ae9abd58bca2739f1ae ]

[WHY]
dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized.

[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +10 -0
index 3442e08f47876..98dd07e3726af 100644
@@ -2974,6 +2974,10 @@ static int dm_resume(void *handle)
 	/* Do mst topology probing after resuming cached state*/
 	drm_connector_list_iter_begin(ddev, &iter);
 	drm_for_each_connector_iter(connector, &iter) {
+
+		if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
+			continue;
+
 		aconnector = to_amdgpu_dm_connector(connector);
 		if (aconnector->dc_link->type != dc_connection_mst_branch ||
 		    aconnector->mst_root)
@@ -5756,6 +5760,9 @@ get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector,
 		&aconnector->base.probed_modes :
 		&aconnector->base.modes;
 
+	if (aconnector->base.connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
+		return NULL;
+
 	if (aconnector->freesync_vid_base.clock != 0)
 		return &aconnector->freesync_vid_base;
 
@@ -8445,6 +8452,9 @@ static void amdgpu_dm_commit_audio(struct drm_device *dev,
 			continue;
 
 notify:
+		if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK)
+			continue;
+
 		aconnector = to_amdgpu_dm_connector(connector);
 
 		mutex_lock(&adev->dm.audio_lock);
Signature · 1 line
2.43.0
author maintainer
#20 lore raw

PATCH 20/29 drm/amdgpu: Fix VCN allocation in CPX partition

In reply to Sasha Levin

From: Lijo Lazar <[email protected]>

[ Upstream commit f7e232de51bb1b45646e5b7dc4ebcf13510f2630 ]

VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In certain configs, VCN instance can be exclusively allocated to a partition even under CPX mode.

---
 drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c +11 -4
index d0fc62784e821..0284c9198a04a 100644
@@ -61,6 +61,11 @@ void aqua_vanjaram_doorbell_index_init(struct amdgpu_device *adev)
 	adev->doorbell_index.max_assignment = AMDGPU_DOORBELL_LAYOUT1_MAX_ASSIGNMENT << 1;
 }
 
+static bool aqua_vanjaram_xcp_vcn_shared(struct amdgpu_device *adev)
+{
+	return (adev->xcp_mgr->num_xcps > adev->vcn.num_vcn_inst);
+}
+
 static void aqua_vanjaram_set_xcp_id(struct amdgpu_device *adev,
 			     uint32_t inst_idx, struct amdgpu_ring *ring)
 {
@@ -86,7 +91,7 @@ static void aqua_vanjaram_set_xcp_id(struct amdgpu_device *adev,
 	case AMDGPU_RING_TYPE_VCN_ENC:
 	case AMDGPU_RING_TYPE_VCN_JPEG:
 		ip_blk = AMDGPU_XCP_VCN;
-		if (adev->xcp_mgr->mode == AMDGPU_CPX_PARTITION_MODE)
+		if (aqua_vanjaram_xcp_vcn_shared(adev))
 			inst_mask = 1 << (inst_idx * 2);
 		break;
 	default:
@@ -139,10 +144,12 @@ static int aqua_vanjaram_xcp_sched_list_update(
 
 		aqua_vanjaram_xcp_gpu_sched_update(adev, ring, ring->xcp_id);
 
-		/* VCN is shared by two partitions under CPX MODE */
+		/* VCN may be shared by two partitions under CPX MODE in certain
+		 * configs.
+		 */
 		if ((ring->funcs->type == AMDGPU_RING_TYPE_VCN_ENC ||
-			ring->funcs->type == AMDGPU_RING_TYPE_VCN_JPEG) &&
-			adev->xcp_mgr->mode == AMDGPU_CPX_PARTITION_MODE)
+		     ring->funcs->type == AMDGPU_RING_TYPE_VCN_JPEG) &&
+		    aqua_vanjaram_xcp_vcn_shared(adev))
 			aqua_vanjaram_xcp_gpu_sched_update(adev, ring, ring->xcp_id + 1);
 	}
 
Signature · 1 line
2.43.0
author maintainer
#21 lore raw

PATCH 21/29 amd/amdkfd: sync all devices to wait all processes being evicted

In reply to Sasha Levin

From: Zhigang Luo <[email protected]>

[ Upstream commit d06af584be5a769d124b7302b32a033e9559761d ]

If there are more than one device doing reset in parallel, the first device will call kfd_suspend_all_processes() to evict all processes on all devices, this call takes time to finish. other device will start reset and recover without waiting. if the process has not been evicted before doing recover, it will be restored, then caused page fault.

---
 drivers/gpu/drm/amd/amdkfd/kfd_device.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_device.c +6 -11
index 93ce181eb3baa..913c70a0ef44f 100644
@@ -935,7 +935,6 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm)
 {
 	struct kfd_node *node;
 	int i;
-	int count;
 
 	if (!kfd->init_complete)
 		return;
@@ -943,12 +942,10 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm)
 	/* for runtime suspend, skip locking kfd */
 	if (!run_pm) {
 		mutex_lock(&kfd_processes_mutex);
-		count = ++kfd_locked;
-		mutex_unlock(&kfd_processes_mutex);
-
 		/* For first KFD device suspend all the KFD processes */
-		if (count == 1)
+		if (++kfd_locked == 1)
 			kfd_suspend_all_processes();
+		mutex_unlock(&kfd_processes_mutex);
 	}
 
 	for (i = 0; i < kfd->num_nodes; i++) {
@@ -959,7 +956,7 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm)
 
 int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm)
 {
-	int ret, count, i;
+	int ret, i;
 
 	if (!kfd->init_complete)
 		return 0;
@@ -973,12 +970,10 @@ int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm)
 	/* for runtime resume, skip unlocking kfd */
 	if (!run_pm) {
 		mutex_lock(&kfd_processes_mutex);
-		count = --kfd_locked;
-		mutex_unlock(&kfd_processes_mutex);
-
-		WARN_ONCE(count < 0, "KFD suspend / resume ref. error");
-		if (count == 0)
+		if (--kfd_locked == 0)
 			ret = kfd_resume_all_processes();
+		WARN_ONCE(kfd_locked < 0, "KFD suspend / resume ref. error");
+		mutex_unlock(&kfd_processes_mutex);
 	}
 
 	return ret;
Signature · 1 line
2.43.0
author maintainer
#22 lore raw

PATCH 22/29 selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior

In reply to Sasha Levin

From: John Stultz <[email protected]>

[ Upstream commit 076361362122a6d8a4c45f172ced5576b2d4a50d ]

The struct adjtimex freq field takes a signed value who's units are in shifted (<<16) parts-per-million.

Unfortunately for negative adjustments, the straightforward use of:

freq = ppm << 16 trips undefined behavior warnings with clang:

valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]

        -499<<16,
        ~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
        -450<<16,
        ~~~~^

..

Fix it by using a multiply by (1 << 16) instead of shifting negative values in the valid-adjtimex test case. Align the values for better readability.

---
 .../testing/selftests/timers/valid-adjtimex.c | 73 +++++++++----------
 1 file changed, 36 insertions(+), 37 deletions(-)
tools/testing/selftests/timers/valid-adjtimex.c +36 -37
index 48b9a803235a8..d13ebde203221 100644
@@ -21,9 +21,6 @@
  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *   GNU General Public License for more details.
  */
-
-
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <time.h>
@@ -62,45 +59,47 @@ int clear_time_state(void)
 #define NUM_FREQ_OUTOFRANGE 4
 #define NUM_FREQ_INVALID 2
 
+#define SHIFTED_PPM (1 << 16)
+
 long valid_freq[NUM_FREQ_VALID] = {
-	-499<<16,
-	-450<<16,
-	-400<<16,
-	-350<<16,
-	-300<<16,
-	-250<<16,
-	-200<<16,
-	-150<<16,
-	-100<<16,
-	-75<<16,
-	-50<<16,
-	-25<<16,
-	-10<<16,
-	-5<<16,
-	-1<<16,
+	 -499 * SHIFTED_PPM,
+	 -450 * SHIFTED_PPM,
+	 -400 * SHIFTED_PPM,
+	 -350 * SHIFTED_PPM,
+	 -300 * SHIFTED_PPM,
+	 -250 * SHIFTED_PPM,
+	 -200 * SHIFTED_PPM,
+	 -150 * SHIFTED_PPM,
+	 -100 * SHIFTED_PPM,
+	  -75 * SHIFTED_PPM,
+	  -50 * SHIFTED_PPM,
+	  -25 * SHIFTED_PPM,
+	  -10 * SHIFTED_PPM,
+	   -5 * SHIFTED_PPM,
+	   -1 * SHIFTED_PPM,
 	-1000,
-	1<<16,
-	5<<16,
-	10<<16,
-	25<<16,
-	50<<16,
-	75<<16,
-	100<<16,
-	150<<16,
-	200<<16,
-	250<<16,
-	300<<16,
-	350<<16,
-	400<<16,
-	450<<16,
-	499<<16,
+	    1 * SHIFTED_PPM,
+	    5 * SHIFTED_PPM,
+	   10 * SHIFTED_PPM,
+	   25 * SHIFTED_PPM,
+	   50 * SHIFTED_PPM,
+	   75 * SHIFTED_PPM,
+	  100 * SHIFTED_PPM,
+	  150 * SHIFTED_PPM,
+	  200 * SHIFTED_PPM,
+	  250 * SHIFTED_PPM,
+	  300 * SHIFTED_PPM,
+	  350 * SHIFTED_PPM,
+	  400 * SHIFTED_PPM,
+	  450 * SHIFTED_PPM,
+	  499 * SHIFTED_PPM,
 };
 
 long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
-	-1000<<16,
-	-550<<16,
-	550<<16,
-	1000<<16,
+	-1000 * SHIFTED_PPM,
+	 -550 * SHIFTED_PPM,
+	  550 * SHIFTED_PPM,
+	 1000 * SHIFTED_PPM,
 };
 
 #define LONG_MAX (~0UL>>1)
Signature · 1 line
2.43.0
author maintainer
#23 lore raw

PATCH 23/29 Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails

In reply to Sasha Levin

From: Rick Edgecombe <[email protected]>

[ Upstream commit 03f5a999adba062456c8c818a683beb1b498983a ]

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues.

VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens.

Message-ID: <[email protected]>

---
 drivers/hv/connection.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)
drivers/hv/connection.c +22 -7
index 3cabeeabb1cac..f001ae880e1db 100644
@@ -237,8 +237,17 @@ int vmbus_connect(void)
 				vmbus_connection.monitor_pages[0], 1);
 	ret |= set_memory_decrypted((unsigned long)
 				vmbus_connection.monitor_pages[1], 1);
-	if (ret)
+	if (ret) {
+		/*
+		 * If set_memory_decrypted() fails, the encryption state
+		 * of the memory is unknown. So leak the memory instead
+		 * of risking returning decrypted memory to the free list.
+		 * For simplicity, always handle both pages the same.
+		 */
+		vmbus_connection.monitor_pages[0] = NULL;
+		vmbus_connection.monitor_pages[1] = NULL;
 		goto cleanup;
+	}
 
 	/*
 	 * Set_memory_decrypted() will change the memory contents if
@@ -337,13 +346,19 @@ void vmbus_disconnect(void)
 		vmbus_connection.int_page = NULL;
 	}
 
-	set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[0], 1);
-	set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[1], 1);
+	if (vmbus_connection.monitor_pages[0]) {
+		if (!set_memory_encrypted(
+			(unsigned long)vmbus_connection.monitor_pages[0], 1))
+			hv_free_hyperv_page(vmbus_connection.monitor_pages[0]);
+		vmbus_connection.monitor_pages[0] = NULL;
+	}
 
-	hv_free_hyperv_page(vmbus_connection.monitor_pages[0]);
-	hv_free_hyperv_page(vmbus_connection.monitor_pages[1]);
-	vmbus_connection.monitor_pages[0] = NULL;
-	vmbus_connection.monitor_pages[1] = NULL;
+	if (vmbus_connection.monitor_pages[1]) {
+		if (!set_memory_encrypted(
+			(unsigned long)vmbus_connection.monitor_pages[1], 1))
+			hv_free_hyperv_page(vmbus_connection.monitor_pages[1]);
+		vmbus_connection.monitor_pages[1] = NULL;
+	}
 }
 
 /*
Signature · 1 line
2.43.0
author maintainer
#24 lore raw

PATCH 24/29 Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl

In reply to Sasha Levin

From: Rick Edgecombe <[email protected]>

[ Upstream commit 211f514ebf1ef5de37b1cf6df9d28a56cfd242ca ]

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues.

In order to make sure callers of vmbus_establish_gpadl() and vmbus_teardown_gpadl() don't return decrypted/shared pages to allocators, add a field in struct vmbus_gpadl to keep track of the decryption status of the buffers. This will allow the callers to know if they should free or leak the pages.

Message-ID: <[email protected]>

---
 drivers/hv/channel.c   | 25 +++++++++++++++++++++----
 include/linux/hyperv.h |  1 +
 2 files changed, 22 insertions(+), 4 deletions(-)
drivers/hv/channel.c +21 -4
index 56f7e06c673e4..bb5abdcda18f8 100644
@@ -472,9 +472,18 @@ static int __vmbus_establish_gpadl(struct vmbus_channel *channel,
 		(atomic_inc_return(&vmbus_connection.next_gpadl_handle) - 1);
 
 	ret = create_gpadl_header(type, kbuffer, size, send_offset, &msginfo);
-	if (ret)
+	if (ret) {
+		gpadl->decrypted = false;
 		return ret;
+	}
 
+	/*
+	 * Set the "decrypted" flag to true for the set_memory_decrypted()
+	 * success case. In the failure case, the encryption state of the
+	 * memory is unknown. Leave "decrypted" as true to ensure the
+	 * memory will be leaked instead of going back on the free list.
+	 */
+	gpadl->decrypted = true;
 	ret = set_memory_decrypted((unsigned long)kbuffer,
 				   PFN_UP(size));
 	if (ret) {
@@ -563,9 +572,15 @@ static int __vmbus_establish_gpadl(struct vmbus_channel *channel,
 
 	kfree(msginfo);
 
-	if (ret)
-		set_memory_encrypted((unsigned long)kbuffer,
-				     PFN_UP(size));
+	if (ret) {
+		/*
+		 * If set_memory_encrypted() fails, the decrypted flag is
+		 * left as true so the memory is leaked instead of being
+		 * put back on the free list.
+		 */
+		if (!set_memory_encrypted((unsigned long)kbuffer, PFN_UP(size)))
+			gpadl->decrypted = false;
+	}
 
 	return ret;
 }
@@ -886,6 +901,8 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, struct vmbus_gpadl *gpad
 	if (ret)
 		pr_warn("Fail to set mem host visibility in GPADL teardown %d.\n", ret);
 
+	gpadl->decrypted = ret;
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(vmbus_teardown_gpadl);
include/linux/hyperv.h +1 -0
index 6ef0557b4bff8..96ceb4095425e 100644
@@ -832,6 +832,7 @@ struct vmbus_gpadl {
 	u32 gpadl_handle;
 	u32 size;
 	void *buffer;
+	bool decrypted;
 };
 
 struct vmbus_channel {
Signature · 1 line
2.43.0
author maintainer
#25 lore raw

PATCH 25/29 hv_netvsc: Don't free decrypted memory

In reply to Sasha Levin

From: Rick Edgecombe <[email protected]>

[ Upstream commit bbf9ac34677b57506a13682b31a2a718934c0e31 ]

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues.

The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory.

Message-ID: <[email protected]>

---
 drivers/net/hyperv/netvsc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/net/hyperv/netvsc.c +5 -2
index 4f9658a741024..b2f27e505f76c 100644
@@ -154,8 +154,11 @@ static void free_netvsc_device(struct rcu_head *head)
 	int i;
 
 	kfree(nvdev->extension);
-	vfree(nvdev->recv_buf);
-	vfree(nvdev->send_buf);
+
+	if (!nvdev->recv_buf_gpadl_handle.decrypted)
+		vfree(nvdev->recv_buf);
+	if (!nvdev->send_buf_gpadl_handle.decrypted)
+		vfree(nvdev->send_buf);
 	bitmap_free(nvdev->send_section_map);
 
 	for (i = 0; i < VRSS_CHANNEL_MAX; i++) {
Signature · 1 line
2.43.0
author maintainer
#26 lore raw

PATCH 26/29 uio_hv_generic: Don't free decrypted memory

In reply to Sasha Levin

From: Rick Edgecombe <[email protected]>

[ Upstream commit 3d788b2fbe6a1a1a9e3db09742b90809d51638b7 ]

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues.

The VMBus device UIO driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory.

Message-ID: <[email protected]>

---
 drivers/uio/uio_hv_generic.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
drivers/uio/uio_hv_generic.c +8 -4
index 20d9762331bd7..6be3462b109ff 100644
@@ -181,12 +181,14 @@ hv_uio_cleanup(struct hv_device *dev, struct hv_uio_private_data *pdata)
 {
 	if (pdata->send_gpadl.gpadl_handle) {
 		vmbus_teardown_gpadl(dev->channel, &pdata->send_gpadl);
-		vfree(pdata->send_buf);
+		if (!pdata->send_gpadl.decrypted)
+			vfree(pdata->send_buf);
 	}
 
 	if (pdata->recv_gpadl.gpadl_handle) {
 		vmbus_teardown_gpadl(dev->channel, &pdata->recv_gpadl);
-		vfree(pdata->recv_buf);
+		if (!pdata->recv_gpadl.decrypted)
+			vfree(pdata->recv_buf);
 	}
 }
 
@@ -295,7 +297,8 @@ hv_uio_probe(struct hv_device *dev,
 	ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
 				    RECV_BUFFER_SIZE, &pdata->recv_gpadl);
 	if (ret) {
-		vfree(pdata->recv_buf);
+		if (!pdata->recv_gpadl.decrypted)
+			vfree(pdata->recv_buf);
 		goto fail_close;
 	}
 
@@ -317,7 +320,8 @@ hv_uio_probe(struct hv_device *dev,
 	ret = vmbus_establish_gpadl(channel, pdata->send_buf,
 				    SEND_BUFFER_SIZE, &pdata->send_gpadl);
 	if (ret) {
-		vfree(pdata->send_buf);
+		if (!pdata->send_gpadl.decrypted)
+			vfree(pdata->send_buf);
 		goto fail_close;
 	}
 
Signature · 1 line
2.43.0
author maintainer
#27 lore raw

PATCH 27/29 Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted

In reply to Sasha Levin

From: Michael Kelley <[email protected]>

[ Upstream commit 30d18df6567be09c1433e81993e35e3da573ac48 ]

In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues.

The VMBus ring buffer code could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the struct vmbus_gpadl for the ring buffers to decide whether to free the memory.

Message-ID: <[email protected]>

---
 drivers/hv/channel.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/hv/channel.c +3 -1
index bb5abdcda18f8..47e1bd8de9fcf 100644
@@ -153,7 +153,9 @@ void vmbus_free_ring(struct vmbus_channel *channel)
 	hv_ringbuffer_cleanup(&channel->inbound);
 
 	if (channel->ringbuffer_page) {
-		__free_pages(channel->ringbuffer_page,
+		/* In a CoCo VM leak the memory if it didn't get re-encrypted */
+		if (!channel->ringbuffer_gpadlhandle.decrypted)
+			__free_pages(channel->ringbuffer_page,
 			     get_order(channel->ringbuffer_pagecount
 				       << PAGE_SHIFT));
 		channel->ringbuffer_page = NULL;
Signature · 1 line
2.43.0
author maintainer
#28 lore raw

PATCH 28/29 smb3: fix broken reconnect when password changing on the server by allowing password rotation

In reply to Sasha Levin

From: Steve French <[email protected]>

[ Upstream commit 35f834265e0dc78b003aa0d1af65cafb89666b76 ]

There are various use cases that are becoming more common in which password changes are scheduled on a server(s) periodically but the clients connected to this server need to stay connected (even in the face of brief network reconnects) due to mounts which can not be easily unmounted and mounted at will, and servers that do password rotation do not always have the ability to tell the clients exactly when to the new password will be effective, so add support for an alt password ("password2=") on mount (and also remount) so that we can anticipate the upcoming change to the server without risking breaking existing mounts.

An alternative would have been to use the kernel keyring for this but the processes doing the reconnect do not have access to the keyring but do have access to the ses structure.

---
 fs/smb/client/cifsglob.h   |  1 +
 fs/smb/client/connect.c    |  8 ++++++++
 fs/smb/client/fs_context.c | 21 +++++++++++++++++++++
 fs/smb/client/fs_context.h |  2 ++
 fs/smb/client/misc.c       |  1 +
 fs/smb/client/smb2pdu.c    | 11 +++++++++++
 6 files changed, 44 insertions(+)
fs/smb/client/cifsglob.h +1 -0
index a878b1e5aa313..1f6954b7311e3 100644
@@ -1049,6 +1049,7 @@ struct cifs_ses {
 				   and after mount option parsing we fill it */
 	char *domainName;
 	char *password;
+	char *password2; /* When key rotation used, new password may be set before it expires */
 	char workstation_name[CIFS_MAX_WORKSTATION_LEN];
 	struct session_key auth_key;
 	struct ntlmssp_auth *ntlmssp; /* ciphertext, flags, server challenge */
fs/smb/client/connect.c +8 -0
index 97776dd12b6b8..7091885d5036d 100644
@@ -2195,6 +2195,7 @@ cifs_set_cifscreds(struct smb3_fs_context *ctx, struct cifs_ses *ses)
 	}
 
 	++delim;
+	/* BB consider adding support for password2 (Key Rotation) for multiuser in future */
 	ctx->password = kstrndup(delim, len, GFP_KERNEL);
 	if (!ctx->password) {
 		cifs_dbg(FYI, "Unable to allocate %zd bytes for password\n",
@@ -2218,6 +2219,7 @@ cifs_set_cifscreds(struct smb3_fs_context *ctx, struct cifs_ses *ses)
 			kfree(ctx->username);
 			ctx->username = NULL;
 			kfree_sensitive(ctx->password);
+			/* no need to free ctx->password2 since not allocated in this path */
 			ctx->password = NULL;
 			goto out_key_put;
 		}
@@ -2329,6 +2331,12 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb3_fs_context *ctx)
 		if (!ses->password)
 			goto get_ses_fail;
 	}
+	/* ctx->password freed at unmount */
+	if (ctx->password2) {
+		ses->password2 = kstrdup(ctx->password2, GFP_KERNEL);
+		if (!ses->password2)
+			goto get_ses_fail;
+	}
 	if (ctx->domainname) {
 		ses->domainName = kstrdup(ctx->domainname, GFP_KERNEL);
 		if (!ses->domainName)
fs/smb/client/fs_context.c +21 -0
index 58567ae617b9f..9d485e7b85541 100644
@@ -161,6 +161,7 @@ const struct fs_parameter_spec smb3_fs_parameters[] = {
 	fsparam_string("username", Opt_user),
 	fsparam_string("pass", Opt_pass),
 	fsparam_string("password", Opt_pass),
+	fsparam_string("password2", Opt_pass2),
 	fsparam_string("ip", Opt_ip),
 	fsparam_string("addr", Opt_ip),
 	fsparam_string("domain", Opt_domain),
@@ -314,6 +315,7 @@ smb3_fs_context_dup(struct smb3_fs_context *new_ctx, struct smb3_fs_context *ctx
 	new_ctx->nodename = NULL;
 	new_ctx->username = NULL;
 	new_ctx->password = NULL;
+	new_ctx->password2 = NULL;
 	new_ctx->server_hostname = NULL;
 	new_ctx->domainname = NULL;
 	new_ctx->UNC = NULL;
@@ -326,6 +328,7 @@ smb3_fs_context_dup(struct smb3_fs_context *new_ctx, struct smb3_fs_context *ctx
 	DUP_CTX_STR(prepath);
 	DUP_CTX_STR(username);
 	DUP_CTX_STR(password);
+	DUP_CTX_STR(password2);
 	DUP_CTX_STR(server_hostname);
 	DUP_CTX_STR(UNC);
 	DUP_CTX_STR(source);
@@ -874,6 +877,8 @@ static int smb3_reconfigure(struct fs_context *fc)
 	else  {
 		kfree_sensitive(ses->password);
 		ses->password = kstrdup(ctx->password, GFP_KERNEL);
+		kfree_sensitive(ses->password2);
+		ses->password2 = kstrdup(ctx->password2, GFP_KERNEL);
 	}
 	STEAL_STRING(cifs_sb, ctx, domainname);
 	STEAL_STRING(cifs_sb, ctx, nodename);
@@ -1271,6 +1276,18 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
 			goto cifs_parse_mount_err;
 		}
 		break;
+	case Opt_pass2:
+		kfree_sensitive(ctx->password2);
+		ctx->password2 = NULL;
+		if (strlen(param->string) == 0)
+			break;
+
+		ctx->password2 = kstrdup(param->string, GFP_KERNEL);
+		if (ctx->password2 == NULL) {
+			cifs_errorf(fc, "OOM when copying password2 string\n");
+			goto cifs_parse_mount_err;
+		}
+		break;
 	case Opt_ip:
 		if (strlen(param->string) == 0) {
 			ctx->got_ip = false;
@@ -1570,6 +1587,8 @@ static int smb3_fs_context_parse_param(struct fs_context *fc,
  cifs_parse_mount_err:
 	kfree_sensitive(ctx->password);
 	ctx->password = NULL;
+	kfree_sensitive(ctx->password2);
+	ctx->password2 = NULL;
 	return -EINVAL;
 }
 
@@ -1672,6 +1691,8 @@ smb3_cleanup_fs_context_contents(struct smb3_fs_context *ctx)
 	ctx->username = NULL;
 	kfree_sensitive(ctx->password);
 	ctx->password = NULL;
+	kfree_sensitive(ctx->password2);
+	ctx->password2 = NULL;
 	kfree(ctx->server_hostname);
 	ctx->server_hostname = NULL;
 	kfree(ctx->UNC);
fs/smb/client/fs_context.h +2 -0
index 8cfc25b609b6b..e807bea49d41f 100644
@@ -137,6 +137,7 @@ enum cifs_param {
 	Opt_source,
 	Opt_user,
 	Opt_pass,
+	Opt_pass2,
 	Opt_ip,
 	Opt_domain,
 	Opt_srcaddr,
@@ -168,6 +169,7 @@ struct smb3_fs_context {
 
 	char *username;
 	char *password;
+	char *password2;
 	char *domainname;
 	char *source;
 	char *server_hostname;
fs/smb/client/misc.c +1 -0
index ef573e3f8e52a..9f2a13083500e 100644
@@ -101,6 +101,7 @@ sesInfoFree(struct cifs_ses *buf_to_free)
 	kfree(buf_to_free->serverDomain);
 	kfree(buf_to_free->serverNOS);
 	kfree_sensitive(buf_to_free->password);
+	kfree_sensitive(buf_to_free->password2);
 	kfree(buf_to_free->user_name);
 	kfree(buf_to_free->domainName);
 	kfree_sensitive(buf_to_free->auth_key.response);
fs/smb/client/smb2pdu.c +11 -0
index 94bd4c6d2d682..70530108b9bb9 100644
@@ -367,6 +367,17 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
 		}
 
 		rc = cifs_setup_session(0, ses, server, nls_codepage);
+		if ((rc == -EACCES) || (rc == -EKEYEXPIRED) || (rc == -EKEYREVOKED)) {
+			/*
+			 * Try alternate password for next reconnect (key rotation
+			 * could be enabled on the server e.g.) if an alternate
+			 * password is available and the current password is expired,
+			 * but do not swap on non pwd related errors like host down
+			 */
+			if (ses->password2)
+				swap(ses->password2, ses->password);
+		}
+
 		if ((rc == -EACCES) && !tcon->retry) {
 			mutex_unlock(&ses->session_mutex);
 			rc = -EHOSTDOWN;
Signature · 1 line
2.43.0
author maintainer
#29 lore raw

PATCH 29/29 iommu: mtk: fix module autoloading

In reply to Sasha Levin

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit 7537e31df80cb58c27f3b6fef702534ea87a5957 ]

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table.

---
 drivers/iommu/mtk_iommu.c    | 1 +
 drivers/iommu/mtk_iommu_v1.c | 1 +
 2 files changed, 2 insertions(+)
drivers/iommu/mtk_iommu.c +1 -0
index fab6c347ce578..de698463e94ad 100644
@@ -1773,6 +1773,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = {
 	{ .compatible = "mediatek,mt8365-m4u", .data = &mt8365_data},
 	{}
 };
+MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids);
 
 static struct platform_driver mtk_iommu_driver = {
 	.probe	= mtk_iommu_probe,
drivers/iommu/mtk_iommu_v1.c +1 -0
index 8a0a5e5d049f4..f1754efcfe74e 100644
@@ -600,6 +600,7 @@ static const struct of_device_id mtk_iommu_v1_of_ids[] = {
 	{ .compatible = "mediatek,mt2701-m4u", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids);
 
 static const struct component_master_ops mtk_iommu_v1_com_ops = {
 	.bind		= mtk_iommu_v1_bind,
Signature · 1 line
2.43.0
#10 lore raw

Re: [PATCH AUTOSEL 6.6 10/29] memblock tests: fix undefined reference to `BIT'

In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

From: Wei Yang <[email protected]>

[ Upstream commit 592447f6cb3c20d606d6c5d8e6af68e99707b786 ]

commit 772dd0342727 ("mm: enumerate all gfp flags") define gfp flags with the help of BIT, while gfp_types.h doesn't include header file for the definition. This through an error on building memblock tests.

Quoted 8 lines

Let's include linux/bits.h to fix it.

Sasha, are you backporting 772dd0342727 ("mm: enumerate all gfp flags") to 6.6 and 6.8 kernels? Just checking because I didn't see any emails about that and can't find it in stable branches. If not, then this fixup is not needed there.

Quoted 20 lines
---
 include/linux/gfp_types.h | 2 ++
 1 file changed, 2 insertions(+)
include/linux/gfp_types.h +2 -1
index 6583a58670c57..dfde1e1e321c3 100644
@@ -2,6 +2,8 @@
 #ifndef __LINUX_GFP_TYPES_H
 #define __LINUX_GFP_TYPES_H
 
+#include <linux/bits.h>
+
 /* The typedef is in types.h but we want the documentation here */
 #if 0
 /**
--

2.43.0