Skip to contentSkip to conversation

5.15.157-rc1 review

PATCH In review Greg Kroah-Hartman 10 participants 83 messages Apr 23, 2024 – Apr 27, 2024

Subsystems (4)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.15.157-rc1 review

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.157-rc1

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530

Vladimir Oltean <[email protected]>
net: dsa: introduce preferred_default_local_cpu_port and use on MT7530

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP

Jeongjun Park <[email protected]>
nilfs2: fix OOB in nilfs_set_de_type

Dave Airlie <[email protected]>
nouveau: fix instmem race condition around ptr stores

Zack Rusin <[email protected]>
drm/vmwgfx: Sort primary plane formats by order of preference

xinhui pan <[email protected]>
drm/amdgpu: validate the parameters of bo mapping operations more clearly

Carlos Llamas <[email protected]>
binder: check offset alignment in binder_get_object()

Yuntao Wang <[email protected]>
init/main.c: Fix potential static_command_line memory overflow

Yaxiong Tian <[email protected]>
arm64: hibernate: Fix level3 translation fault in swsusp_save()

Sandipan Das <[email protected]>
KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms

Sean Christopherson <[email protected]>
KVM: x86: Snapshot if a vCPU's vendor model is AMD vs. Intel compatible

Alan Stern <[email protected]>
fs: sysfs: Fix reference leak in sysfs_break_active_protection()

Samuel Thibault <[email protected]>
speakup: Avoid crash on very long word

Alexander Usyskin <[email protected]>
mei: me: disable RPL-S on SPS and IGN firmwares

Norihiko Hama <[email protected]>
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error

Kai-Heng Feng <[email protected]>
usb: Disable USB3 LPM at shutdown

Minas Harutyunyan <[email protected]>
usb: dwc2: host: Fix dereference issue in DDMA completion flow.

Greg Kroah-Hartman <[email protected]>
Revert "usb: cdc-wdm: close race between read and workqueue"

Daniele Palmas <[email protected]>
USB: serial: option: add Telit FN920C04 rmnet compositions

Vanillan Wang <[email protected]>
USB: serial: option: add Rolling RW101-GL and RW135-GL support

Jerry Meng <[email protected]>
USB: serial: option: support Quectel EM060K sub-models

Coia Prant <[email protected]>
USB: serial: option: add Lonsung U8300/U9300 product

Chuanhong Guo <[email protected]>
USB: serial: option: add support for Fibocom FM650/FG650

bolan wang <[email protected]>
USB: serial: option: add Fibocom FM135-GL variants

Finn Thain <[email protected]>
serial/pmac_zilog: Remove flawed mitigation for rx irq flood

Nikita Zhandarovich <[email protected]>

    comedi: vmk80xx: fix incomplete endpoint checking

Gil Fine <[email protected]>
thunderbolt: Fix wake configurations after device unplug

Gil Fine <[email protected]>
thunderbolt: Avoid notify PM core about runtime PM resume

Eric Biggers <[email protected]>
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ

Josh Poimboeuf <[email protected]>
x86/bugs: Fix BHI retpoline check

Stephen Boyd <[email protected]>
clk: Get runtime PM before walking tree during disable_unused

Stephen Boyd <[email protected]>
clk: Initialize struct clk_core kref earlier

Konrad Dybcio <[email protected]>
clk: Print an info line before disabling unused clocks

Claudiu Beznea <[email protected]>
clk: remove extra empty line

Stephen Boyd <[email protected]>
clk: Mark 'all_lists' as const

Stephen Boyd <[email protected]>
clk: Remove prepare_lock hold assertion in __clk_release()

Dmitry Baryshkov <[email protected]>
drm/panel: visionox-rm69299: don't unregister DSI device

Mikhail Kobuk <[email protected]>
drm: nv04: Fix out of bounds access

Peter Oberparleiter <[email protected]>
s390/cio: fix race condition during online processing

Peter Oberparleiter <[email protected]>
s390/qdio: handle deferred cc1

Michael Guralnik <[email protected]>
RDMA/mlx5: Fix port number for counter query in multi-port configuration

Mark Zhang <[email protected]>
RDMA/cm: Print the old state when cm_destroy_id gets timeout

Yanjun.Zhu <[email protected]>
RDMA/rxe: Fix the problem "mutex_destroy missing"

Siddharth Vadapalli <[email protected]>
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them

Arınç ÜNAL <[email protected]>
net: dsa: mt7530: fix mirroring frames received on local port

Lei Chen <[email protected]>
tun: limit printing rate when illegal packet received by tun dev

Kuniyuki Iwashima <[email protected]>
af_unix: Don't peek OOB data without MSG_OOB.

Kuniyuki Iwashima <[email protected]>
af_unix: Call manage_oob() for every skb in unix_stream_read_generic().

Pablo Neira Ayuso <[email protected]>
netfilter: flowtable: incorrect pppoe tuple

Pablo Neira Ayuso <[email protected]>
netfilter: flowtable: validate pppoe header

Vlad Buslov <[email protected]>
netfilter: nf_flow_table: count pending offload workqueue tasks

Florian Westphal <[email protected]>
netfilter: nft_set_pipapo: do not free live element

Pablo Neira Ayuso <[email protected]>
netfilter: br_netfilter: skip conntrack input hook for promisc packets

Ziyang Xuan <[email protected]>
netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()

Ziyang Xuan <[email protected]>
netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()

Chuck Lever <[email protected]>
Revert "lockd: introduce safe async lock op"

Siddh Raman Pant <[email protected]>
Revert "tracing/trigger: Fix to return error if failed to alloc snapshot"

Zheng Yejian <[email protected]>
kprobes: Fix possible use-after-free issue on kprobe registration

Daniel Borkmann <[email protected]>
bpf: Fix ringbuf memory type confusion when passing to helpers

Daniel Borkmann <[email protected]>
bpf: Fix out of bounds access for ringbuf helpers

Daniel Borkmann <[email protected]>
bpf: Generally fix helper register offset check

Daniel Borkmann <[email protected]>
bpf: Generalize check_ctx_reg for reuse with other types

Kumar Kartikeya Dwivedi <[email protected]>
bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support

Yuanhe Shu <[email protected]>
selftests/ftrace: Limit length in subsystem-enable tests

Steven Rostedt (Google) <[email protected]>
SUNRPC: Fix rpcgss_context trace event acceptor field

Boris Burkov <[email protected]>
btrfs: record delayed inode root in transaction

Namjae Jeon <[email protected]>
ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1

Namjae Jeon <[email protected]>
ksmbd: validate payload size in ipc response

Namjae Jeon <[email protected]>
ksmbd: don't send oplock break if rename fails

-------------

Diffstat:

 Documentation/filesystems/nfs/exporting.rst        |   7 -
 Makefile                                           |   4 +-
 arch/arm64/mm/pageattr.c                           |   3 -
 arch/x86/include/asm/kvm_host.h                    |   1 +
 arch/x86/kernel/cpu/bugs.c                         |  11 +-
 arch/x86/kernel/cpu/cpuid-deps.c                   |   6 +-
 arch/x86/kvm/cpuid.c                               |   1 +
 arch/x86/kvm/cpuid.h                               |  10 ++
 arch/x86/kvm/lapic.c                               |   3 +-
 arch/x86/kvm/mmu/mmu.c                             |   2 +-
 arch/x86/kvm/x86.c                                 |   2 +-
 drivers/accessibility/speakup/main.c               |   2 +-
 drivers/android/binder.c                           |   4 +-
 drivers/clk/clk.c                                  | 154 ++++++++++++++++-----
 drivers/comedi/drivers/vmk80xx.c                   |  35 ++---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             |  72 ++++++----
 drivers/gpu/drm/nouveau/nouveau_bios.c             |  13 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c |   7 +-
 drivers/gpu/drm/panel/panel-visionox-rm69299.c     |   2 -
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h                |   4 +-
 drivers/infiniband/core/cm.c                       |  11 +-
 drivers/infiniband/hw/mlx5/mad.c                   |   3 +-
 drivers/infiniband/sw/rxe/rxe.c                    |   2 +
 drivers/misc/mei/pci-me.c                          |   2 +-
 drivers/net/dsa/mt7530.c                           |  60 +++++---
 drivers/net/dsa/mt7530.h                           |   6 +
 drivers/net/ethernet/ti/am65-cpsw-nuss.c           |  18 +++
 drivers/net/tun.c                                  |  18 +--
 drivers/s390/cio/device.c                          |  13 +-
 drivers/s390/cio/qdio_main.c                       |  28 +++-
 drivers/thunderbolt/switch.c                       |  50 +++++--
 drivers/thunderbolt/tb.c                           |   4 +-
 drivers/thunderbolt/tb.h                           |   3 +-
 drivers/thunderbolt/usb4.c                         |  13 +-
 drivers/tty/serial/pmac_zilog.c                    |  14 --
 drivers/usb/class/cdc-wdm.c                        |   6 +-
 drivers/usb/core/port.c                            |   4 +-
 drivers/usb/dwc2/hcd_ddma.c                        |   4 +-
 drivers/usb/gadget/function/f_ncm.c                |   4 +-
 drivers/usb/serial/option.c                        |  40 ++++++
 fs/btrfs/delayed-inode.c                           |   3 +
 fs/ksmbd/ksmbd_netlink.h                           |   3 +-
 fs/ksmbd/mgmt/share_config.c                       |   7 +-
 fs/ksmbd/smb2ops.c                                 |  10 +-
 fs/ksmbd/smb2pdu.c                                 |   3 +-
 fs/ksmbd/transport_ipc.c                           |  37 +++++
 fs/lockd/svclock.c                                 |   4 +-
 fs/nfsd/nfs4state.c                                |  10 +-
 fs/nilfs2/dir.c                                    |   2 +-
 fs/sysfs/file.c                                    |   2 +
 include/linux/bpf.h                                |   9 +-
 include/linux/bpf_verifier.h                       |   4 +-
 include/linux/exportfs.h                           |  14 --
 include/net/dsa.h                                  |   8 ++
 include/net/net_namespace.h                        |   6 +
 include/net/netfilter/nf_flow_table.h              |  33 ++++-
 include/net/netns/flow_table.h                     |  14 ++
 include/trace/events/rpcgss.h                      |   4 +-
 init/main.c                                        |   2 +
 kernel/bpf/btf.c                                   |  93 ++++++++++---
 kernel/bpf/verifier.c                              |  66 ++++++---
 kernel/kprobes.c                                   |  18 ++-
 kernel/trace/trace_events_trigger.c                |   6 +-
 net/bridge/br_input.c                              |  15 +-
 net/bridge/br_netfilter_hooks.c                    |   6 +
 net/bridge/br_private.h                            |   1 +
 net/bridge/netfilter/nf_conntrack_bridge.c         |  14 +-
 net/dsa/dsa2.c                                     |  24 +++-
 net/netfilter/Kconfig                              |   9 ++
 net/netfilter/Makefile                             |   1 +
 net/netfilter/nf_flow_table_core.c                 |  62 ++++++++-
 net/netfilter/nf_flow_table_inet.c                 |   3 +-
 net/netfilter/nf_flow_table_ip.c                   |  10 +-
 net/netfilter/nf_flow_table_offload.c              |  17 ++-
 net/netfilter/nf_flow_table_procfs.c               |  80 +++++++++++
 net/netfilter/nf_tables_api.c                      |  16 ++-
 net/netfilter/nft_set_pipapo.c                     |  14 +-
 net/unix/af_unix.c                                 |  12 +-
 .../ftrace/test.d/event/subsystem-enable.tc        |   6 +-
 79 files changed, 973 insertions(+), 321 deletions(-)
author maintainer
#1 lore raw

PATCH 1/71 ksmbd: dont send oplock break if rename fails

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <[email protected]>

[ Upstream commit c1832f67035dc04fb89e6b591b64e4d515843cda ]

Don't send oplock break if rename fails. This patch fix smb2.oplock.batch20 test.

---
 fs/ksmbd/smb2pdu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ksmbd/smb2pdu.c +2 -1
index 14cd86a14012f..86b1fb43104e9 100644
@@ -5581,8 +5581,9 @@ static int smb2_rename(struct ksmbd_work *work,
 	if (!file_info->ReplaceIfExists)
 		flags = RENAME_NOREPLACE;
 
-	smb_break_all_levII_oplock(work, fp, 0);
 	rc = ksmbd_vfs_rename(work, &fp->filp->f_path, new_name, flags);
+	if (!rc)
+		smb_break_all_levII_oplock(work, fp, 0);
 out:
 	kfree(new_name);
 	return rc;
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 2/71 ksmbd: validate payload size in ipc response

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <[email protected]>

[ Upstream commit a677ebd8ca2f2632ccdecbad7b87641274e15aac ]

If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc response to ksmbd kernel server. ksmbd should validate payload size of ipc response from ksmbd.mountd to avoid memory overrun or slab-out-of-bounds. This patch validate 3 ipc response that has payload.

---
 fs/ksmbd/ksmbd_netlink.h     |  3 ++-
 fs/ksmbd/mgmt/share_config.c |  7 ++++++-
 fs/ksmbd/transport_ipc.c     | 37 ++++++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 2 deletions(-)
fs/ksmbd/ksmbd_netlink.h +2 -1
index ecffcb8a1557a..dc30cd0f6acd0 100644
@@ -166,7 +166,8 @@ struct ksmbd_share_config_response {
 	__u16	force_uid;
 	__u16	force_gid;
 	__s8	share_name[KSMBD_REQ_MAX_SHARE_NAME];
-	__u32	reserved[112];		/* Reserved room */
+	__u32	reserved[111];		/* Reserved room */
+	__u32	payload_sz;
 	__u32	veto_list_sz;
 	__s8	____payload[];
 };
fs/ksmbd/mgmt/share_config.c +6 -1
index 328a412259dc1..a2f0a2edceb8a 100644
@@ -158,7 +158,12 @@ static struct ksmbd_share_config *share_config_request(struct unicode_map *um,
 	share->name = kstrdup(name, GFP_KERNEL);
 
 	if (!test_share_config_flag(share, KSMBD_SHARE_FLAG_PIPE)) {
-		share->path = kstrdup(ksmbd_share_config_path(resp),
+		int path_len = PATH_MAX;
+
+		if (resp->payload_sz)
+			path_len = resp->payload_sz - resp->veto_list_sz;
+
+		share->path = kstrndup(ksmbd_share_config_path(resp), path_len,
 				      GFP_KERNEL);
 		if (share->path)
 			share->path_sz = strlen(share->path);
fs/ksmbd/transport_ipc.c +37 -0
index 2c9662e327990..d62ebbff1e0f4 100644
@@ -65,6 +65,7 @@ struct ipc_msg_table_entry {
 	struct hlist_node	ipc_table_hlist;
 
 	void			*response;
+	unsigned int		msg_sz;
 };
 
 static struct delayed_work ipc_timer_work;
@@ -274,6 +275,7 @@ static int handle_response(int type, void *payload, size_t sz)
 		}
 
 		memcpy(entry->response, payload, sz);
+		entry->msg_sz = sz;
 		wake_up_interruptible(&entry->wait);
 		ret = 0;
 		break;
@@ -452,6 +454,34 @@ static int ipc_msg_send(struct ksmbd_ipc_msg *msg)
 	return ret;
 }
 
+static int ipc_validate_msg(struct ipc_msg_table_entry *entry)
+{
+	unsigned int msg_sz = entry->msg_sz;
+
+	if (entry->type == KSMBD_EVENT_RPC_REQUEST) {
+		struct ksmbd_rpc_command *resp = entry->response;
+
+		msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
+	} else if (entry->type == KSMBD_EVENT_SPNEGO_AUTHEN_REQUEST) {
+		struct ksmbd_spnego_authen_response *resp = entry->response;
+
+		msg_sz = sizeof(struct ksmbd_spnego_authen_response) +
+				resp->session_key_len + resp->spnego_blob_len;
+	} else if (entry->type == KSMBD_EVENT_SHARE_CONFIG_REQUEST) {
+		struct ksmbd_share_config_response *resp = entry->response;
+
+		if (resp->payload_sz) {
+			if (resp->payload_sz < resp->veto_list_sz)
+				return -EINVAL;
+
+			msg_sz = sizeof(struct ksmbd_share_config_response) +
+					resp->payload_sz;
+		}
+	}
+
+	return entry->msg_sz != msg_sz ? -EINVAL : 0;
+}
+
 static void *ipc_msg_send_request(struct ksmbd_ipc_msg *msg, unsigned int handle)
 {
 	struct ipc_msg_table_entry entry;
@@ -476,6 +506,13 @@ static void *ipc_msg_send_request(struct ksmbd_ipc_msg *msg, unsigned int handle
 	ret = wait_event_interruptible_timeout(entry.wait,
 					       entry.response != NULL,
 					       IPC_WAIT_TIMEOUT);
+	if (entry.response) {
+		ret = ipc_validate_msg(&entry);
+		if (ret) {
+			kvfree(entry.response);
+			entry.response = NULL;
+		}
+	}
 out:
 	down_write(&ipc_msg_table_lock);
 	hash_del(&entry.ipc_table_hlist);
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 3/71 ksmbd: do not set SMB2_GLOBAL_CAP_ENCRYPTION for SMB 3.1.1

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Namjae Jeon <[email protected]>

[ Upstream commit 5ed11af19e56f0434ce0959376d136005745a936 ]

SMB2_GLOBAL_CAP_ENCRYPTION flag should be used only for 3.0 and 3.0.2 dialects. This flags set cause compatibility problems with other SMB clients.

---
 fs/ksmbd/smb2ops.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
fs/ksmbd/smb2ops.c +5 -5
index c69943d96565a..d0db9f32c423d 100644
@@ -229,6 +229,11 @@ void init_smb3_0_server(struct ksmbd_conn *conn)
 	    conn->cli_cap & SMB2_GLOBAL_CAP_ENCRYPTION)
 		conn->vals->capabilities |= SMB2_GLOBAL_CAP_ENCRYPTION;
 
+	if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION ||
+	    (!(server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION_OFF) &&
+	     conn->cli_cap & SMB2_GLOBAL_CAP_ENCRYPTION))
+		conn->vals->capabilities |= SMB2_GLOBAL_CAP_ENCRYPTION;
+
 	if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB3_MULTICHANNEL)
 		conn->vals->capabilities |= SMB2_GLOBAL_CAP_MULTI_CHANNEL;
 }
@@ -276,11 +281,6 @@ int init_smb3_11_server(struct ksmbd_conn *conn)
 		conn->vals->capabilities |= SMB2_GLOBAL_CAP_LEASING |
 			SMB2_GLOBAL_CAP_DIRECTORY_LEASING;
 
-	if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION ||
-	    (!(server_conf.flags & KSMBD_GLOBAL_FLAG_SMB2_ENCRYPTION_OFF) &&
-	     conn->cli_cap & SMB2_GLOBAL_CAP_ENCRYPTION))
-		conn->vals->capabilities |= SMB2_GLOBAL_CAP_ENCRYPTION;
-
 	if (server_conf.flags & KSMBD_GLOBAL_FLAG_SMB3_MULTICHANNEL)
 		conn->vals->capabilities |= SMB2_GLOBAL_CAP_MULTI_CHANNEL;
 
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 4/71 btrfs: record delayed inode root in transaction

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Burkov <[email protected]>

[ Upstream commit 71537e35c324ea6fbd68377a4f26bb93a831ae35 ]

When running delayed inode updates, we do not record the inode's root in the transaction, but we do allocate PREALLOC and thus converted PERTRANS space for it. To be sure we free that PERTRANS meta rsv, we must ensure that we record the root in the transaction.

Fixes 4f5427ccce5d ("btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item")
---
 fs/btrfs/delayed-inode.c | 3 +++
 1 file changed, 3 insertions(+)
fs/btrfs/delayed-inode.c +3 -0
index 5a98c5da12250..8d8b455992362 100644
@@ -1046,6 +1046,9 @@ __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans,
 	if (ret)
 		return ret;
 
+	ret = btrfs_record_root_in_trans(trans, node->root);
+	if (ret)
+		return ret;
 	ret = btrfs_update_delayed_inode(trans, node->root, path, node);
 	return ret;
 }
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 5/71 SUNRPC: Fix rpcgss_context trace event acceptor field

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (Google) <[email protected]>

commit a4833e3abae132d613ce7da0e0c9a9465d1681fa upstream.

The rpcgss_context trace event acceptor field is a dynamically sized string that records the "data" parameter. But this parameter is also dependent on the "len" field to determine the size of the data.

It needs to use __string_len() helper macro where the length can be passed in. It also incorrectly uses strncpy() to save it instead of __assign_str(). As these macros can change, it is not wise to open code them in trace events.

As of commit c759e609030c ("tracing: Remove __assign_str_len()"), __assign_str() can be used for both __string() and __string_len() fields. Before that commit, __assign_str_len() is required to be used. This needs to be noted for backporting. (In actuality, commit c1fa617caeb0 ("tracing:
Rework __assign_str() and __string() to not duplicate getting the string") is the commit that makes __string_str_len() obsolete).

Fixes 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
---
 include/trace/events/rpcgss.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
include/trace/events/rpcgss.h +2 -2
@@ -587,7 +587,7 @@ TRACE_EVENT(rpcgss_context,
 		__field(unsigned int, timeout)
 		__field(u32, window_size)
 		__field(int, len)
-		__string(acceptor, data)
+		__string_len(acceptor, data, len)
 	),
 
 	TP_fast_assign(
@@ -596,7 +596,7 @@ TRACE_EVENT(rpcgss_context,
 		__entry->timeout = timeout;
 		__entry->window_size = window_size;
 		__entry->len = len;
-		strncpy(__get_str(acceptor), data, len);
+		__assign_str(acceptor, data);
 	),
 
 	TP_printk("win_size=%u expiry=%lu now=%lu timeout=%u acceptor=%.*s",
author maintainer
#6 lore raw

PATCH 6/71 selftests/ftrace: Limit length in subsystem-enable tests

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuanhe Shu <[email protected]>

commit 1a4ea83a6e67f1415a1f17c1af5e9c814c882bb5 upstream.

While sched* events being traced and sched* events continuously happen, "[xx] event tracing - enable/disable with subsystem level files" would not stop as on some slower systems it seems to take forever. Select the first 100 lines of output would be enough to judge whether there are more than 3 types of sched events.

---
 tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc +3 -3
@@ -18,7 +18,7 @@ echo 'sched:*' > set_event
 
 yield
 
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
 if [ $count -lt 3 ]; then
     fail "at least fork, exec and exit events should be recorded"
 fi
@@ -29,7 +29,7 @@ echo 1 > events/sched/enable
 
 yield
 
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
 if [ $count -lt 3 ]; then
     fail "at least fork, exec and exit events should be recorded"
 fi
@@ -40,7 +40,7 @@ echo 0 > events/sched/enable
 
 yield
 
-count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+count=`head -n 100 trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
 if [ $count -ne 0 ]; then
     fail "any of scheduler events should not be recorded"
 fi
author maintainer
#7 lore raw

PATCH 7/71 bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kumar Kartikeya Dwivedi <[email protected]>

commit 3363bd0cfbb80dfcd25003cd3815b0ad8b68d0ff upstream.

Allow passing PTR_TO_CTX, if the kfunc expects a matching struct type, and punt to PTR_TO_MEM block if reg->type does not fall in one of PTR_TO_BTF_ID or PTR_TO_SOCK* types. This will be used by future commits to get access to XDP and TC PTR_TO_CTX, and pass various data (flags, l4proto, netns_id, etc.) encoded in opts struct passed as pointer to kfunc.

For PTR_TO_MEM support, arguments are currently limited to pointer to scalar, or pointer to struct composed of scalars. This is done so that unsafe scenarios (like passing PTR_TO_MEM where PTR_TO_BTF_ID of in-kernel valid structure is expected, which may have pointers) are avoided. Since the argument checking happens basd on argument register type, it is not easy to ascertain what the expected type is. In the future, support for PTR_TO_MEM for kfunc can be extended to serve other usecases. The struct type whose pointer is passed in may have maximum nesting depth of 4, all recursively composed of scalars or struct with scalars.

Future commits will add negative tests that check whether these restrictions imposed for kfunc arguments are duly rejected by BPF verifier or not.

---
 kernel/bpf/btf.c |   93 +++++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 73 insertions(+), 20 deletions(-)
kernel/bpf/btf.c +73 -20
@@ -5447,6 +5447,46 @@ static u32 *reg2btf_ids[__BPF_REG_TYPE_M
 #endif
 };
 
+/* Returns true if struct is composed of scalars, 4 levels of nesting allowed */
+static bool __btf_type_is_scalar_struct(struct bpf_verifier_log *log,
+					const struct btf *btf,
+					const struct btf_type *t, int rec)
+{
+	const struct btf_type *member_type;
+	const struct btf_member *member;
+	u32 i;
+
+	if (!btf_type_is_struct(t))
+		return false;
+
+	for_each_member(i, t, member) {
+		const struct btf_array *array;
+
+		member_type = btf_type_skip_modifiers(btf, member->type, NULL);
+		if (btf_type_is_struct(member_type)) {
+			if (rec >= 3) {
+				bpf_log(log, "max struct nesting depth exceeded\n");
+				return false;
+			}
+			if (!__btf_type_is_scalar_struct(log, btf, member_type, rec + 1))
+				return false;
+			continue;
+		}
+		if (btf_type_is_array(member_type)) {
+			array = btf_type_array(member_type);
+			if (!array->nelems)
+				return false;
+			member_type = btf_type_skip_modifiers(btf, array->type, NULL);
+			if (!btf_type_is_scalar(member_type))
+				return false;
+			continue;
+		}
+		if (!btf_type_is_scalar(member_type))
+			return false;
+	}
+	return true;
+}
+
 static int btf_check_func_arg_match(struct bpf_verifier_env *env,
 				    const struct btf *btf, u32 func_id,
 				    struct bpf_reg_state *regs,
@@ -5455,6 +5495,7 @@ static int btf_check_func_arg_match(stru
 	enum bpf_prog_type prog_type = env->prog->type == BPF_PROG_TYPE_EXT ?
 		env->prog->aux->dst_prog->type : env->prog->type;
 	struct bpf_verifier_log *log = &env->log;
+	bool is_kfunc = btf_is_kernel(btf);
 	const char *func_name, *ref_tname;
 	const struct btf_type *t, *ref_t;
 	const struct btf_param *args;
@@ -5507,7 +5548,20 @@ static int btf_check_func_arg_match(stru
 
 		ref_t = btf_type_skip_modifiers(btf, t->type, &ref_id);
 		ref_tname = btf_name_by_offset(btf, ref_t->name_off);
-		if (btf_is_kernel(btf)) {
+		if (btf_get_prog_ctx_type(log, btf, t, prog_type, i)) {
+			/* If function expects ctx type in BTF check that caller
+			 * is passing PTR_TO_CTX.
+			 */
+			if (reg->type != PTR_TO_CTX) {
+				bpf_log(log,
+					"arg#%d expected pointer to ctx, but got %s\n",
+					i, btf_type_str(t));
+				return -EINVAL;
+			}
+			if (check_ctx_reg(env, reg, regno))
+				return -EINVAL;
+		} else if (is_kfunc && (reg->type == PTR_TO_BTF_ID ||
+			   (reg2btf_ids[base_type(reg->type)] && !type_flag(reg->type)))) {
 			const struct btf_type *reg_ref_t;
 			const struct btf *reg_btf;
 			const char *reg_ref_tname;
@@ -5523,14 +5577,9 @@ static int btf_check_func_arg_match(stru
 			if (reg->type == PTR_TO_BTF_ID) {
 				reg_btf = reg->btf;
 				reg_ref_id = reg->btf_id;
-			} else if (reg2btf_ids[base_type(reg->type)]) {
+			} else {
 				reg_btf = btf_vmlinux;
 				reg_ref_id = *reg2btf_ids[base_type(reg->type)];
-			} else {
-				bpf_log(log, "kernel function %s args#%d expected pointer to %s %s but R%d is not a pointer to btf_id\n",
-					func_name, i,
-					btf_type_str(ref_t), ref_tname, regno);
-				return -EINVAL;
 			}
 
 			reg_ref_t = btf_type_skip_modifiers(reg_btf, reg_ref_id,
@@ -5546,22 +5595,24 @@ static int btf_check_func_arg_match(stru
 					reg_ref_tname);
 				return -EINVAL;
 			}
-		} else if (btf_get_prog_ctx_type(log, btf, t, prog_type, i)) {
-			/* If function expects ctx type in BTF check that caller
-			 * is passing PTR_TO_CTX.
-			 */
-			if (reg->type != PTR_TO_CTX) {
-				bpf_log(log,
-					"arg#%d expected pointer to ctx, but got %s\n",
-					i, btf_type_str(t));
-				return -EINVAL;
-			}
-			if (check_ctx_reg(env, reg, regno))
-				return -EINVAL;
 		} else if (ptr_to_mem_ok) {
 			const struct btf_type *resolve_ret;
 			u32 type_size;
 
+			if (is_kfunc) {
+				/* Permit pointer to mem, but only when argument
+				 * type is pointer to scalar, or struct composed
+				 * (recursively) of scalars.
+				 */
+				if (!btf_type_is_scalar(ref_t) &&
+				    !__btf_type_is_scalar_struct(log, btf, ref_t, 0)) {
+					bpf_log(log,
+						"arg#%d pointer type %s %s must point to scalar or struct with scalar\n",
+						i, btf_type_str(ref_t), ref_tname);
+					return -EINVAL;
+				}
+			}
+
 			resolve_ret = btf_resolve_size(btf, ref_t, &type_size);
 			if (IS_ERR(resolve_ret)) {
 				bpf_log(log,
@@ -5574,6 +5625,8 @@ static int btf_check_func_arg_match(stru
 			if (check_mem_reg(env, reg, regno, type_size))
 				return -EINVAL;
 		} else {
+			bpf_log(log, "reg type unsupported for arg#%d %sfunction %s#%d\n", i,
+				is_kfunc ? "kernel " : "", func_name, func_id);
 			return -EINVAL;
 		}
 	}
@@ -5623,7 +5676,7 @@ int btf_check_kfunc_arg_match(struct bpf
 			      const struct btf *btf, u32 func_id,
 			      struct bpf_reg_state *regs)
 {
-	return btf_check_func_arg_match(env, btf, func_id, regs, false);
+	return btf_check_func_arg_match(env, btf, func_id, regs, true);
 }
 
 /* Convert BTF of a function into bpf_reg_state if possible
author maintainer
#8 lore raw

PATCH 8/71 bpf: Generalize check_ctx_reg for reuse with other types

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

commit be80a1d3f9dbe5aee79a325964f7037fe2d92f30 upstream.

Generalize the check_ctx_reg() helper function into a more generic named one so that it can be reused for other register types as well to check whether their offset is non-zero. No functional change.

---
 include/linux/bpf_verifier.h |    4 ++--
 kernel/bpf/btf.c             |    2 +-
 kernel/bpf/verifier.c        |   21 +++++++++++----------
 3 files changed, 14 insertions(+), 13 deletions(-)
include/linux/bpf_verifier.h +2 -2
@@ -541,8 +541,8 @@ bpf_prog_offload_replace_insn(struct bpf
 void
 bpf_prog_offload_remove_insns(struct bpf_verifier_env *env, u32 off, u32 cnt);
 
-int check_ctx_reg(struct bpf_verifier_env *env,
-		  const struct bpf_reg_state *reg, int regno);
+int check_ptr_off_reg(struct bpf_verifier_env *env,
+		      const struct bpf_reg_state *reg, int regno);
 int check_mem_reg(struct bpf_verifier_env *env, struct bpf_reg_state *reg,
 		   u32 regno, u32 mem_size);
 
kernel/bpf/btf.c +1 -1
@@ -5558,7 +5558,7 @@ static int btf_check_func_arg_match(stru
 					i, btf_type_str(t));
 				return -EINVAL;
 			}
-			if (check_ctx_reg(env, reg, regno))
+			if (check_ptr_off_reg(env, reg, regno))
 				return -EINVAL;
 		} else if (is_kfunc && (reg->type == PTR_TO_BTF_ID ||
 			   (reg2btf_ids[base_type(reg->type)] && !type_flag(reg->type)))) {
kernel/bpf/verifier.c +11 -10
@@ -3980,16 +3980,16 @@ static int get_callee_stack_depth(struct
 }
 #endif
 
-int check_ctx_reg(struct bpf_verifier_env *env,
-		  const struct bpf_reg_state *reg, int regno)
+int check_ptr_off_reg(struct bpf_verifier_env *env,
+		      const struct bpf_reg_state *reg, int regno)
 {
-	/* Access to ctx or passing it to a helper is only allowed in
-	 * its original, unmodified form.
+	/* Access to this pointer-typed register or passing it to a helper
+	 * is only allowed in its original, unmodified form.
 	 */
 
 	if (reg->off) {
-		verbose(env, "dereference of modified ctx ptr R%d off=%d disallowed\n",
-			regno, reg->off);
+		verbose(env, "dereference of modified %s ptr R%d off=%d disallowed\n",
+			reg_type_str(env, reg->type), regno, reg->off);
 		return -EACCES;
 	}
 
@@ -3997,7 +3997,8 @@ int check_ctx_reg(struct bpf_verifier_en
 		char tn_buf[48];
 
 		tnum_strn(tn_buf, sizeof(tn_buf), reg->var_off);
-		verbose(env, "variable ctx access var_off=%s disallowed\n", tn_buf);
+		verbose(env, "variable %s access var_off=%s disallowed\n",
+			reg_type_str(env, reg->type), tn_buf);
 		return -EACCES;
 	}
 
@@ -4447,7 +4448,7 @@ static int check_mem_access(struct bpf_v
 			return -EACCES;
 		}
 
-		err = check_ctx_reg(env, reg, regno);
+		err = check_ptr_off_reg(env, reg, regno);
 		if (err < 0)
 			return err;
 
@@ -5327,7 +5328,7 @@ static int check_func_arg(struct bpf_ver
 		return err;
 
 	if (type == PTR_TO_CTX) {
-		err = check_ctx_reg(env, reg, regno);
+		err = check_ptr_off_reg(env, reg, regno);
 		if (err < 0)
 			return err;
 	}
@@ -9561,7 +9562,7 @@ static int check_ld_abs(struct bpf_verif
 			return err;
 	}
 
-	err = check_ctx_reg(env, &regs[ctx_reg], ctx_reg);
+	err = check_ptr_off_reg(env, &regs[ctx_reg], ctx_reg);
 	if (err < 0)
 		return err;
 
author maintainer
#9 lore raw

PATCH 9/71 bpf: Generally fix helper register offset check

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

commit 6788ab23508bddb0a9d88e104284922cb2c22b77 upstream.

Right now the assertion on check_ptr_off_reg() is only enforced for register types PTR_TO_CTX (and open coded also for PTR_TO_BTF_ID), however, this is insufficient since many other PTR_TO_* register types such as PTR_TO_FUNC do not handle/expect register offsets when passed to helper functions.

Given this can slip-through easily when adding new types, make this an explicit allow-list and reject all other current and future types by default if this is encountered.

Also, extend check_ptr_off_reg() to handle PTR_TO_BTF_ID as well instead of duplicating it. For PTR_TO_BTF_ID, reg->off is used for BTF to match expected BTF ids if struct offset is used. This part still needs to be allowed, but the dynamic off from the tnum must be rejected.

Fixes 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
---
 kernel/bpf/verifier.c |   39 ++++++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 11 deletions(-)
kernel/bpf/verifier.c +28 -11
@@ -3980,14 +3980,15 @@ static int get_callee_stack_depth(struct
 }
 #endif
 
-int check_ptr_off_reg(struct bpf_verifier_env *env,
-		      const struct bpf_reg_state *reg, int regno)
+static int __check_ptr_off_reg(struct bpf_verifier_env *env,
+			       const struct bpf_reg_state *reg, int regno,
+			       bool fixed_off_ok)
 {
 	/* Access to this pointer-typed register or passing it to a helper
 	 * is only allowed in its original, unmodified form.
 	 */
 
-	if (reg->off) {
+	if (!fixed_off_ok && reg->off) {
 		verbose(env, "dereference of modified %s ptr R%d off=%d disallowed\n",
 			reg_type_str(env, reg->type), regno, reg->off);
 		return -EACCES;
@@ -4005,6 +4006,12 @@ int check_ptr_off_reg(struct bpf_verifie
 	return 0;
 }
 
+int check_ptr_off_reg(struct bpf_verifier_env *env,
+		      const struct bpf_reg_state *reg, int regno)
+{
+	return __check_ptr_off_reg(env, reg, regno, false);
+}
+
 static int __check_buffer_access(struct bpf_verifier_env *env,
 				 const char *buf_info,
 				 const struct bpf_reg_state *reg,
@@ -5267,12 +5274,6 @@ found:
 				kernel_type_name(btf_vmlinux, *arg_btf_id));
 			return -EACCES;
 		}
-
-		if (!tnum_is_const(reg->var_off) || reg->var_off.value) {
-			verbose(env, "R%d is a pointer to in-kernel struct with non-zero offset\n",
-				regno);
-			return -EACCES;
-		}
 	}
 
 	return 0;
@@ -5327,10 +5328,26 @@ static int check_func_arg(struct bpf_ver
 	if (err)
 		return err;
 
-	if (type == PTR_TO_CTX) {
-		err = check_ptr_off_reg(env, reg, regno);
+	switch ((u32)type) {
+	case SCALAR_VALUE:
+	/* Pointer types where reg offset is explicitly allowed: */
+	case PTR_TO_PACKET:
+	case PTR_TO_PACKET_META:
+	case PTR_TO_MAP_KEY:
+	case PTR_TO_MAP_VALUE:
+	case PTR_TO_MEM:
+	case PTR_TO_MEM | MEM_RDONLY:
+	case PTR_TO_BUF:
+	case PTR_TO_BUF | MEM_RDONLY:
+	case PTR_TO_STACK:
+		break;
+	/* All the rest must be rejected: */
+	default:
+		err = __check_ptr_off_reg(env, reg, regno,
+					  type == PTR_TO_BTF_ID);
 		if (err < 0)
 			return err;
+		break;
 	}
 
 skip_type_check:
author maintainer
#10 lore raw

PATCH 10/71 bpf: Fix out of bounds access for ringbuf helpers

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

commit 64620e0a1e712a778095bd35cbb277dc2259281f upstream.

Both bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM in their bpf_func_proto definition as their first argument. They both expect the result from a prior bpf_ringbuf_reserve() call which has a return type of RET_PTR_TO_ALLOC_MEM_OR_NULL.

Meaning, after a NULL check in the code, the verifier will promote the register type in the non-NULL branch to a PTR_TO_MEM and in the NULL branch to a known zero scalar. Generally, pointer arithmetic on PTR_TO_MEM is allowed, so the latter could have an offset.

The ARG_PTR_TO_ALLOC_MEM expects a PTR_TO_MEM register type. However, the non- zero result from bpf_ringbuf_reserve() must be fed into either bpf_ringbuf_submit() or bpf_ringbuf_discard() but with the original offset given it will then read out the struct bpf_ringbuf_hdr mapping.

The verifier missed to enforce a zero offset, so that out of bounds access can be triggered which could be used to escalate privileges if unprivileged BPF was enabled (disabled by default in kernel).

Fixes 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
---
 kernel/bpf/verifier.c |    6 ++++++
 1 file changed, 6 insertions(+)
kernel/bpf/verifier.c +6 -0
@@ -5340,9 +5340,15 @@ static int check_func_arg(struct bpf_ver
 	case PTR_TO_BUF:
 	case PTR_TO_BUF | MEM_RDONLY:
 	case PTR_TO_STACK:
+		/* Some of the argument types nevertheless require a
+		 * zero register offset.
+		 */
+		if (arg_type == ARG_PTR_TO_ALLOC_MEM)
+			goto force_off_check;
 		break;
 	/* All the rest must be rejected: */
 	default:
+force_off_check:
 		err = __check_ptr_off_reg(env, reg, regno,
 					  type == PTR_TO_BTF_ID);
 		if (err < 0)
author maintainer
#11 lore raw

PATCH 11/71 bpf: Fix ringbuf memory type confusion when passing to helpers

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <[email protected]>

commit a672b2e36a648afb04ad3bda93b6bda947a479a5 upstream.

The bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM in their bpf_func_proto definition as their first argument, and thus both expect the result from a prior bpf_ringbuf_reserve() call which has a return type of RET_PTR_TO_ALLOC_MEM_OR_NULL.

While the non-NULL memory from bpf_ringbuf_reserve() can be passed to other helpers, the two sinks (bpf_ringbuf_submit(), bpf_ringbuf_discard()) right now only enforce a register type of PTR_TO_MEM.

This can lead to potential type confusion since it would allow other PTR_TO_MEM memory to be passed into the two sinks which did not come from bpf_ringbuf_reserve().

Add a new MEM_ALLOC composable type attribute for PTR_TO_MEM, and enforce that:

- bpf_ringbuf_reserve() returns NULL or PTR_TO_MEM | MEM_ALLOC
- bpf_ringbuf_submit() and bpf_ringbuf_discard() only take PTR_TO_MEM | MEM_ALLOC but not plain PTR_TO_MEM arguments via ARG_PTR_TO_ALLOC_MEM
- however, other helpers might treat PTR_TO_MEM | MEM_ALLOC as plain PTR_TO_MEM to populate the memory area when they use ARG_PTR_TO_{UNINIT_,}MEM in their func proto description

Fixes 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
---
 include/linux/bpf.h   |    9 +++++++--
 kernel/bpf/verifier.c |    6 +++++-
 2 files changed, 12 insertions(+), 3 deletions(-)
include/linux/bpf.h +7 -2
@@ -321,7 +321,12 @@ enum bpf_type_flag {
 	 */
 	MEM_RDONLY		= BIT(1 + BPF_BASE_TYPE_BITS),
 
-	__BPF_TYPE_LAST_FLAG	= MEM_RDONLY,
+	/* MEM was "allocated" from a different helper, and cannot be mixed
+	 * with regular non-MEM_ALLOC'ed MEM types.
+	 */
+	MEM_ALLOC		= BIT(2 + BPF_BASE_TYPE_BITS),
+
+	__BPF_TYPE_LAST_FLAG	= MEM_ALLOC,
 };
 
 /* Max number of base types. */
@@ -405,7 +410,7 @@ enum bpf_return_type {
 	RET_PTR_TO_SOCKET_OR_NULL	= PTR_MAYBE_NULL | RET_PTR_TO_SOCKET,
 	RET_PTR_TO_TCP_SOCK_OR_NULL	= PTR_MAYBE_NULL | RET_PTR_TO_TCP_SOCK,
 	RET_PTR_TO_SOCK_COMMON_OR_NULL	= PTR_MAYBE_NULL | RET_PTR_TO_SOCK_COMMON,
-	RET_PTR_TO_ALLOC_MEM_OR_NULL	= PTR_MAYBE_NULL | RET_PTR_TO_ALLOC_MEM,
+	RET_PTR_TO_ALLOC_MEM_OR_NULL	= PTR_MAYBE_NULL | MEM_ALLOC | RET_PTR_TO_ALLOC_MEM,
 	RET_PTR_TO_BTF_ID_OR_NULL	= PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID,
 
 	/* This must be the last entry. Its purpose is to ensure the enum is
kernel/bpf/verifier.c +5 -1
@@ -573,6 +573,8 @@ static const char *reg_type_str(struct b
 
 	if (type & MEM_RDONLY)
 		strncpy(prefix, "rdonly_", 16);
+	if (type & MEM_ALLOC)
+		strncpy(prefix, "alloc_", 16);
 
 	snprintf(env->type_str_buf, TYPE_STR_BUF_LEN, "%s%s%s",
 		 prefix, str[base_type(type)], postfix);
@@ -5157,6 +5159,7 @@ static const struct bpf_reg_types mem_ty
 		PTR_TO_MAP_KEY,
 		PTR_TO_MAP_VALUE,
 		PTR_TO_MEM,
+		PTR_TO_MEM | MEM_ALLOC,
 		PTR_TO_BUF,
 	},
 };
@@ -5174,7 +5177,7 @@ static const struct bpf_reg_types int_pt
 static const struct bpf_reg_types fullsock_types = { .types = { PTR_TO_SOCKET } };
 static const struct bpf_reg_types scalar_types = { .types = { SCALAR_VALUE } };
 static const struct bpf_reg_types context_types = { .types = { PTR_TO_CTX } };
-static const struct bpf_reg_types alloc_mem_types = { .types = { PTR_TO_MEM } };
+static const struct bpf_reg_types alloc_mem_types = { .types = { PTR_TO_MEM | MEM_ALLOC } };
 static const struct bpf_reg_types const_map_ptr_types = { .types = { CONST_PTR_TO_MAP } };
 static const struct bpf_reg_types btf_ptr_types = { .types = { PTR_TO_BTF_ID } };
 static const struct bpf_reg_types spin_lock_types = { .types = { PTR_TO_MAP_VALUE } };
@@ -5337,6 +5340,7 @@ static int check_func_arg(struct bpf_ver
 	case PTR_TO_MAP_VALUE:
 	case PTR_TO_MEM:
 	case PTR_TO_MEM | MEM_RDONLY:
+	case PTR_TO_MEM | MEM_ALLOC:
 	case PTR_TO_BUF:
 	case PTR_TO_BUF | MEM_RDONLY:
 	case PTR_TO_STACK:
author maintainer
#12 lore raw

PATCH 12/71 kprobes: Fix possible use-after-free issue on kprobe registration

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zheng Yejian <[email protected]>

commit 325f3fb551f8cd672dbbfc4cf58b14f9ee3fc9e8 upstream.

When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. is_module_text_address() and __module_text_address() works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use is_module_text_address() and __module_text_address() separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations.

In check_kprobe_address_safe(), if the second __module_text_address() is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free).

To fix this problem, we should not use separated is_module_text_address() and __module_text_address(), but use only __module_text_address() once and do try_module_get(module) which is only available with MODULE_STATE_LIVE.

Fixes 28f6c37a2910 ("kprobes: Forbid probing on trampoline and BPF code areas")

[Fix conflict due to lack dependency
commit 223a76b268c9 ("kprobes: Fix coding style issues")]

---
 kernel/kprobes.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)
kernel/kprobes.c +12 -6
@@ -1564,10 +1564,17 @@ static int check_kprobe_address_safe(str
 	jump_label_lock();
 	preempt_disable();
 
-	/* Ensure it is not in reserved area nor out of text */
-	if (!(core_kernel_text((unsigned long) p->addr) ||
-	    is_module_text_address((unsigned long) p->addr)) ||
-	    in_gate_area_no_mm((unsigned long) p->addr) ||
+	/* Ensure the address is in a text area, and find a module if exists. */
+	*probed_mod = NULL;
+	if (!core_kernel_text((unsigned long) p->addr)) {
+		*probed_mod = __module_text_address((unsigned long) p->addr);
+		if (!(*probed_mod)) {
+			ret = -EINVAL;
+			goto out;
+		}
+	}
+	/* Ensure it is not in reserved area. */
+	if (in_gate_area_no_mm((unsigned long) p->addr) ||
 	    within_kprobe_blacklist((unsigned long) p->addr) ||
 	    jump_label_text_reserved(p->addr, p->addr) ||
 	    static_call_text_reserved(p->addr, p->addr) ||
@@ -1577,8 +1584,7 @@ static int check_kprobe_address_safe(str
 		goto out;
 	}
 
-	/* Check if are we probing a module */
-	*probed_mod = __module_text_address((unsigned long) p->addr);
+	/* Get module refcount and reject __init functions for loaded modules. */
 	if (*probed_mod) {
 		/*
 		 * We must hold a refcount of the probed module while updating
author maintainer
#13 lore raw

PATCH 13/71 Revert "tracing/trigger: Fix to return error if failed to alloc snapshot"

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Siddh Raman Pant <[email protected]>

This reverts commit b5085b5ac1d96ea2a8a6240f869655176ce44197 which is commit 0958b33ef5a04ed91f61cef4760ac412080c4e08 upstream.

The change has an incorrect assumption about the return value because
in the current stable trees for versions 5.15 and before, the following commit responsible for making 0 a success value is not present:
b8cc44a4d3c1 ("tracing: Remove logic for registering multiple event triggers at a time")

The return value should be 0 on failure in the current tree, because in the functions event_trigger_callback() and event_enable_trigger_func(), we have:

	ret = cmd_ops->reg(glob, trigger_ops, trigger_data, file);
	/*
	 * The above returns on success the # of functions enabled,
	 * but if it didn't find any functions it returns zero.
	 * Consider no functions a failure too.
	 */
	if (!ret) {
		ret = -ENOENT;
---
 kernel/trace/trace_events_trigger.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
kernel/trace/trace_events_trigger.c +2 -4
@@ -1161,10 +1161,8 @@ register_snapshot_trigger(char *glob, st
 			  struct event_trigger_data *data,
 			  struct trace_event_file *file)
 {
-	int ret = tracing_alloc_snapshot_instance(file->tr);
-
-	if (ret < 0)
-		return ret;
+	if (tracing_alloc_snapshot_instance(file->tr) != 0)
+		return 0;
 
 	return register_trigger(glob, ops, data, file);
 }
author maintainer
#14 lore raw

PATCH 14/71 Revert "lockd: introduce safe async lock op"

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chuck Lever <[email protected]>

This reverts commit 2267b2e84593bd3d61a1188e68fba06307fa9dab.

ltp test fcntl17 fails on v5.15.154. This was bisected to commit 2267b2e84593 ("lockd: introduce safe async lock op").

---
 Documentation/filesystems/nfs/exporting.rst |    7 -------
 fs/lockd/svclock.c                          |    4 +++-
 fs/nfsd/nfs4state.c                         |   10 +++-------
 include/linux/exportfs.h                    |   14 --------------
 4 files changed, 6 insertions(+), 29 deletions(-)
Documentation/filesystems/nfs/exporting.rst +0 -7
@@ -241,10 +241,3 @@ following flags are defined:
     all of an inode's dirty data on last close. Exports that behave this
     way should set EXPORT_OP_FLUSH_ON_CLOSE so that NFSD knows to skip
     waiting for writeback when closing such files.
-
-  EXPORT_OP_ASYNC_LOCK - Indicates a capable filesystem to do async lock
-    requests from lockd. Only set EXPORT_OP_ASYNC_LOCK if the filesystem has
-    it's own ->lock() functionality as core posix_lock_file() implementation
-    has no async lock request handling yet. For more information about how to
-    indicate an async lock request from a ->lock() file_operations struct, see
-    fs/locks.c and comment for the function vfs_lock_file().
fs/lockd/svclock.c +3 -1
@@ -470,7 +470,9 @@ nlmsvc_lock(struct svc_rqst *rqstp, stru
 	    struct nlm_host *host, struct nlm_lock *lock, int wait,
 	    struct nlm_cookie *cookie, int reclaim)
 {
+#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 	struct inode		*inode = nlmsvc_file_inode(file);
+#endif
 	struct nlm_block	*block = NULL;
 	int			error;
 	int			mode;
@@ -484,7 +486,7 @@ nlmsvc_lock(struct svc_rqst *rqstp, stru
 				(long long)lock->fl.fl_end,
 				wait);
 
-	if (!exportfs_lock_op_is_async(inode->i_sb->s_export_op)) {
+	if (nlmsvc_file_file(file)->f_op->lock) {
 		async_block = wait;
 		wait = 0;
 	}
fs/nfsd/nfs4state.c +3 -7
@@ -7420,7 +7420,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struc
 	struct nfsd4_blocked_lock *nbl = NULL;
 	struct file_lock *file_lock = NULL;
 	struct file_lock *conflock = NULL;
-	struct super_block *sb;
 	__be32 status = 0;
 	int lkflg;
 	int err;
@@ -7442,7 +7441,6 @@ nfsd4_lock(struct svc_rqst *rqstp, struc
 		dprintk("NFSD: nfsd4_lock: permission denied!\n");
 		return status;
 	}
-	sb = cstate->current_fh.fh_dentry->d_sb;
 
 	if (lock->lk_is_new) {
 		if (nfsd4_has_session(cstate))
@@ -7494,8 +7492,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struc
 	fp = lock_stp->st_stid.sc_file;
 	switch (lock->lk_type) {
 		case NFS4_READW_LT:
-			if (nfsd4_has_session(cstate) ||
-			    exportfs_lock_op_is_async(sb->s_export_op))
+			if (nfsd4_has_session(cstate))
 				fl_flags |= FL_SLEEP;
 			fallthrough;
 		case NFS4_READ_LT:
@@ -7507,8 +7504,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struc
 			fl_type = F_RDLCK;
 			break;
 		case NFS4_WRITEW_LT:
-			if (nfsd4_has_session(cstate) ||
-			    exportfs_lock_op_is_async(sb->s_export_op))
+			if (nfsd4_has_session(cstate))
 				fl_flags |= FL_SLEEP;
 			fallthrough;
 		case NFS4_WRITE_LT:
@@ -7536,7 +7532,7 @@ nfsd4_lock(struct svc_rqst *rqstp, struc
 	 * for file locks), so don't attempt blocking lock notifications
 	 * on those filesystems:
 	 */
-	if (!exportfs_lock_op_is_async(sb->s_export_op))
+	if (nf->nf_file->f_op->lock)
 		fl_flags &= ~FL_SLEEP;
 
 	nbl = find_or_allocate_block(lock_sop, &fp->fi_fhandle, nn);
include/linux/exportfs.h +0 -14
@@ -222,23 +222,9 @@ struct export_operations {
 						  atomic attribute updates
 						*/
 #define EXPORT_OP_FLUSH_ON_CLOSE	(0x20) /* fs flushes file data on close */
-#define EXPORT_OP_ASYNC_LOCK		(0x40) /* fs can do async lock request */
 	unsigned long	flags;
 };
 
-/**
- * exportfs_lock_op_is_async() - export op supports async lock operation
- * @export_ops:	the nfs export operations to check
- *
- * Returns true if the nfs export_operations structure has
- * EXPORT_OP_ASYNC_LOCK in their flags set
- */
-static inline bool
-exportfs_lock_op_is_async(const struct export_operations *export_ops)
-{
-	return export_ops->flags & EXPORT_OP_ASYNC_LOCK;
-}
-
 extern int exportfs_encode_inode_fh(struct inode *inode, struct fid *fid,
 				    int *max_len, struct inode *parent);
 extern int exportfs_encode_fh(struct dentry *dentry, struct fid *fid,
author maintainer
#15 lore raw

PATCH 15/71 netfilter: nf_tables: Fix potential data-race in __nft_expr_type_get()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ziyang Xuan <[email protected]>

[ Upstream commit f969eb84ce482331a991079ab7a5c4dc3b7f89bf ]

nft_unregister_expr() can concurrent with __nft_expr_type_get(), and there is not any protection when iterate over nf_tables_expressions list in __nft_expr_type_get(). Therefore, there is potential data-race of nf_tables_expressions list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_expressions list in __nft_expr_type_get(), and use rcu_read_lock() in the caller nft_expr_type_get() to protect the entire type query process.

Fixes ef1f7df9170d ("netfilter: nf_tables: expression ops overloading")
---
 net/netfilter/nf_tables_api.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/netfilter/nf_tables_api.c +6 -2
index 113c1ebe4a5be..d0712553d2b06 100644
@@ -2821,7 +2821,7 @@ static const struct nft_expr_type *__nft_expr_type_get(u8 family,
 {
 	const struct nft_expr_type *type, *candidate = NULL;
 
-	list_for_each_entry(type, &nf_tables_expressions, list) {
+	list_for_each_entry_rcu(type, &nf_tables_expressions, list) {
 		if (!nla_strcmp(nla, type->name)) {
 			if (!type->family && !candidate)
 				candidate = type;
@@ -2853,9 +2853,13 @@ static const struct nft_expr_type *nft_expr_type_get(struct net *net,
 	if (nla == NULL)
 		return ERR_PTR(-EINVAL);
 
+	rcu_read_lock();
 	type = __nft_expr_type_get(family, nla);
-	if (type != NULL && try_module_get(type->owner))
+	if (type != NULL && try_module_get(type->owner)) {
+		rcu_read_unlock();
 		return type;
+	}
+	rcu_read_unlock();
 
 	lockdep_nfnl_nft_mutex_not_held();
 #ifdef CONFIG_MODULES
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 16/71 netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ziyang Xuan <[email protected]>

[ Upstream commit d78d867dcea69c328db30df665be5be7d0148484 ]

nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process.

Fixes e50092404c1b ("netfilter: nf_tables: add stateful objects")
---
 net/netfilter/nf_tables_api.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
net/netfilter/nf_tables_api.c +6 -2
index d0712553d2b06..3999b89793fce 100644
@@ -7045,7 +7045,7 @@ static const struct nft_object_type *__nft_obj_type_get(u32 objtype, u8 family)
 {
 	const struct nft_object_type *type;
 
-	list_for_each_entry(type, &nf_tables_objects, list) {
+	list_for_each_entry_rcu(type, &nf_tables_objects, list) {
 		if (type->family != NFPROTO_UNSPEC &&
 		    type->family != family)
 			continue;
@@ -7061,9 +7061,13 @@ nft_obj_type_get(struct net *net, u32 objtype, u8 family)
 {
 	const struct nft_object_type *type;
 
+	rcu_read_lock();
 	type = __nft_obj_type_get(objtype, family);
-	if (type != NULL && try_module_get(type->owner))
+	if (type != NULL && try_module_get(type->owner)) {
+		rcu_read_unlock();
 		return type;
+	}
+	rcu_read_unlock();
 
 	lockdep_nfnl_nft_mutex_not_held();
 #ifdef CONFIG_MODULES
Signature · 1 line
2.43.0
author maintainer
#17 lore raw

PATCH 17/71 netfilter: br_netfilter: skip conntrack input hook for promisc packets

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 751de2012eafa4d46d8081056761fa0e9cc8a178 ]

For historical reasons, when bridge device is in promisc mode, packets that are directed to the taps follow bridge input hook path. This patch adds a workaround to reset conntrack for these packets.

Jianbo Liu reports warning splats in their test infrastructure where cloned packets reach the br_netfilter input hook to confirm the conntrack object.

Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has reached the input hook because it is passed up to the bridge device to reach the taps.

[   57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core
[   57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19
[   57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[   57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1
[   57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202
[   57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000
[   57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000
[   57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003
[   57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000
[   57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800
[   57.582313] FS:  0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000
[   57.583040] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0
[   57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[   57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[   57.585440] Call Trace:
[   57.585721]  <IRQ>
[   57.585976]  ? __warn+0x7d/0x130
[   57.586323]  ? br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.586811]  ? report_bug+0xf1/0x1c0
[   57.587177]  ? handle_bug+0x3f/0x70
[   57.587539]  ? exc_invalid_op+0x13/0x60
[   57.587929]  ? asm_exc_invalid_op+0x16/0x20
[   57.588336]  ? br_nf_local_in+0x157/0x180 [br_netfilter]
[   57.588825]  nf_hook_slow+0x3d/0xd0
[   57.589188]  ? br_handle_vlan+0x4b/0x110
[   57.589579]  br_pass_frame_up+0xfc/0x150
[   57.589970]  ? br_port_flags_change+0x40/0x40
[   57.590396]  br_handle_frame_finish+0x346/0x5e0
[   57.590837]  ? ipt_do_table+0x32e/0x430
[   57.591221]  ? br_handle_local_finish+0x20/0x20
[   57.591656]  br_nf_hook_thresh+0x4b/0xf0 [br_netfilter]
[   57.592286]  ? br_handle_local_finish+0x20/0x20
[   57.592802]  br_nf_pre_routing_finish+0x178/0x480 [br_netfilter]
[   57.593348]  ? br_handle_local_finish+0x20/0x20
[   57.593782]  ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat]
[   57.594279]  br_nf_pre_routing+0x24c/0x550 [br_netfilter]
[   57.594780]  ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter]
[   57.595280]  br_handle_frame+0x1f3/0x3d0
[   57.595676]  ? br_handle_local_finish+0x20/0x20
[   57.596118]  ? br_handle_frame_finish+0x5e0/0x5e0
[   57.596566]  __netif_receive_skb_core+0x25b/0xfc0
[   57.597017]  ? __napi_build_skb+0x37/0x40
[   57.597418]  __netif_receive_skb_list_core+0xfb/0x220
Fixes 62e7151ae3eb ("netfilter: bridge: confirm multicast packets before passing them up the stack")
---
 net/bridge/br_input.c                      | 15 +++++++++++----
 net/bridge/br_netfilter_hooks.c            |  6 ++++++
 net/bridge/br_private.h                    |  1 +
 net/bridge/netfilter/nf_conntrack_bridge.c | 14 ++++++++++----
 4 files changed, 28 insertions(+), 8 deletions(-)
net/bridge/br_input.c +11 -4
index 54bfcdf692732..f3d49343f7dbe 100644
@@ -30,7 +30,7 @@ br_netif_receive_skb(struct net *net, struct sock *sk, struct sk_buff *skb)
 	return netif_receive_skb(skb);
 }
 
-static int br_pass_frame_up(struct sk_buff *skb)
+static int br_pass_frame_up(struct sk_buff *skb, bool promisc)
 {
 	struct net_device *indev, *brdev = BR_INPUT_SKB_CB(skb)->brdev;
 	struct net_bridge *br = netdev_priv(brdev);
@@ -65,6 +65,8 @@ static int br_pass_frame_up(struct sk_buff *skb)
 	br_multicast_count(br, NULL, skb, br_multicast_igmp_type(skb),
 			   BR_MCAST_DIR_TX);
 
+	BR_INPUT_SKB_CB(skb)->promisc = promisc;
+
 	return NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_IN,
 		       dev_net(indev), NULL, skb, indev, NULL,
 		       br_netif_receive_skb);
@@ -82,6 +84,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
 	struct net_bridge_mcast *brmctx;
 	struct net_bridge_vlan *vlan;
 	struct net_bridge *br;
+	bool promisc;
 	u16 vid = 0;
 	u8 state;
 
@@ -102,7 +105,9 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
 	if (p->flags & BR_LEARNING)
 		br_fdb_update(br, p, eth_hdr(skb)->h_source, vid, 0);
 
-	local_rcv = !!(br->dev->flags & IFF_PROMISC);
+	promisc = !!(br->dev->flags & IFF_PROMISC);
+	local_rcv = promisc;
+
 	if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) {
 		/* by definition the broadcast is also a multicast address */
 		if (is_broadcast_ether_addr(eth_hdr(skb)->h_dest)) {
@@ -165,7 +170,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
 		unsigned long now = jiffies;
 
 		if (test_bit(BR_FDB_LOCAL, &dst->flags))
-			return br_pass_frame_up(skb);
+			return br_pass_frame_up(skb, false);
 
 		if (now != dst->used)
 			dst->used = now;
@@ -178,7 +183,7 @@ int br_handle_frame_finish(struct net *net, struct sock *sk, struct sk_buff *skb
 	}
 
 	if (local_rcv)
-		return br_pass_frame_up(skb);
+		return br_pass_frame_up(skb, promisc);
 
 out:
 	return 0;
@@ -350,6 +355,8 @@ static rx_handler_result_t br_handle_frame(struct sk_buff **pskb)
 				goto forward;
 		}
 
+		BR_INPUT_SKB_CB(skb)->promisc = false;
+
 		/* The else clause should be hit when nf_hook():
 		 *   - returns < 0 (drop/error)
 		 *   - returns = 0 (stolen/nf_queue)
net/bridge/br_netfilter_hooks.c +6 -0
index 8a114a5000466..9981e0dfdd4d3 100644
@@ -584,11 +584,17 @@ static unsigned int br_nf_local_in(void *priv,
 				   struct sk_buff *skb,
 				   const struct nf_hook_state *state)
 {
+	bool promisc = BR_INPUT_SKB_CB(skb)->promisc;
 	struct nf_conntrack *nfct = skb_nfct(skb);
 	const struct nf_ct_hook *ct_hook;
 	struct nf_conn *ct;
 	int ret;
 
+	if (promisc) {
+		nf_reset_ct(skb);
+		return NF_ACCEPT;
+	}
+
 	if (!nfct || skb->pkt_type == PACKET_HOST)
 		return NF_ACCEPT;
 
net/bridge/br_private.h +1 -0
index ff10ddeeb50ff..fe61d3b8d0cc2 100644
@@ -547,6 +547,7 @@ struct br_input_skb_cb {
 #endif
 	u8 proxyarp_replied:1;
 	u8 src_port_isolated:1;
+	u8 promisc:1;
 #ifdef CONFIG_BRIDGE_VLAN_FILTERING
 	u8 vlan_filtered:1;
 #endif
net/bridge/netfilter/nf_conntrack_bridge.c +10 -4
index 83743e95939b1..fbdb1ad448c3a 100644
@@ -293,18 +293,24 @@ static unsigned int nf_ct_bridge_pre(void *priv, struct sk_buff *skb,
 static unsigned int nf_ct_bridge_in(void *priv, struct sk_buff *skb,
 				    const struct nf_hook_state *state)
 {
-	enum ip_conntrack_info ctinfo;
+	bool promisc = BR_INPUT_SKB_CB(skb)->promisc;
+	struct nf_conntrack *nfct = skb_nfct(skb);
 	struct nf_conn *ct;
 
-	if (skb->pkt_type == PACKET_HOST)
+	if (promisc) {
+		nf_reset_ct(skb);
+		return NF_ACCEPT;
+	}
+
+	if (!nfct || skb->pkt_type == PACKET_HOST)
 		return NF_ACCEPT;
 
 	/* nf_conntrack_confirm() cannot handle concurrent clones,
 	 * this happens for broad/multicast frames with e.g. macvlan on top
 	 * of the bridge device.
 	 */
-	ct = nf_ct_get(skb, &ctinfo);
-	if (!ct || nf_ct_is_confirmed(ct) || nf_ct_is_template(ct))
+	ct = container_of(nfct, struct nf_conn, ct_general);
+	if (nf_ct_is_confirmed(ct) || nf_ct_is_template(ct))
 		return NF_ACCEPT;
 
 	/* let inet prerouting call conntrack again */
Signature · 1 line
2.43.0
author maintainer
#18 lore raw

PATCH 18/71 netfilter: nft_set_pipapo: do not free live element

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal <[email protected]>

[ Upstream commit 3cfc9ec039af60dbd8965ae085b2c2ccdcfbe1cc ]

Pablo reports a crash with large batches of elements with a back-to-back add/remove pattern. Quoting Pablo:

add_elem("00000000") timeout 100 ms
...
add_elem("0000000X") timeout 100 ms
del_elem("0000000X") <---------------- delete one that was just added
...
add_elem("00005000") timeout 100 ms

1) nft_pipapo_remove() removes element 0000000X
Then, KASAN shows a splat.

Looking at the remove function there is a chance that we will drop a rule that maps to a non-deactivated element.

Removal happens in two steps, first we do a lookup for key k and return the to-be-removed element and mark it as inactive in the next generation. Then, in a second step, the element gets removed from the set/map.

The _remove function does not work correctly if we have more than one element that share the same key.

This can happen if we insert an element into a set when the set already holds an element with same key, but the element mapping to the existing key has timed out or is not active in the next generation.

In such case its possible that removal will unmap the wrong element. If this happens, we will leak the non-deactivated element, it becomes unreachable.

The element that got deactivated (and will be freed later) will remain reachable in the set data structure, this can result in a crash when such an element is retrieved during lookup (stale pointer).

Add a check that the fully matching key does in fact map to the element that we have marked as inactive in the deactivation step.
If not, we need to continue searching.

Add a bug/warn trap at the end of the function as well, the remove function must not ever be called with an invisible/unreachable/non-existent element.

v2: avoid uneeded temporary variable (Stefano)

Fixes 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
---
 net/netfilter/nft_set_pipapo.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
net/netfilter/nft_set_pipapo.c +9 -5
index 58eca26162735..2299ced939c47 100644
@@ -1994,6 +1994,8 @@ static void nft_pipapo_remove(const struct net *net, const struct nft_set *set,
 		rules_fx = rules_f0;
 
 		nft_pipapo_for_each_field(f, i, m) {
+			bool last = i == m->field_count - 1;
+
 			if (!pipapo_match_field(f, start, rules_fx,
 						match_start, match_end))
 				break;
@@ -2006,16 +2008,18 @@ static void nft_pipapo_remove(const struct net *net, const struct nft_set *set,
 
 			match_start += NFT_PIPAPO_GROUPS_PADDED_SIZE(f);
 			match_end += NFT_PIPAPO_GROUPS_PADDED_SIZE(f);
-		}
 
-		if (i == m->field_count) {
-			priv->dirty = true;
-			pipapo_drop(m, rulemap);
-			return;
+			if (last && f->mt[rulemap[i].to].e == e) {
+				priv->dirty = true;
+				pipapo_drop(m, rulemap);
+				return;
+			}
 		}
 
 		first_rule += rules_f0;
 	}
+
+	WARN_ON_ONCE(1); /* elem_priv not found */
 }
 
 /**
Signature · 1 line
2.43.0
author maintainer
#19 lore raw

PATCH 19/71 netfilter: nf_flow_table: count pending offload workqueue tasks

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vlad Buslov <[email protected]>

[ Upstream commit b038177636f83bbf87c2b238706474145dd2cd04 ]

To improve hardware offload debuggability count pending 'add', 'del' and 'stats' flow_table offload workqueue tasks. Counters are incremented before scheduling new task and decremented when workqueue handler finishes executing. These counters allow user to diagnose congestion on hardware offload workqueues that can happen when either CPU is starved and workqueue jobs are executed at lower rate than new ones are added or when hardware/driver can't keep up with the rate.

Implement the described counters as percpu counters inside new struct netns_ft which is stored inside struct net. Expose them via new procfs file '/proc/net/stats/nf_flowtable' that is similar to existing 'nf_conntrack' file.

Stable-dep-of: 87b3593bed18 ("netfilter: flowtable: validate pppoe header")

---
 include/net/net_namespace.h           |  6 ++
 include/net/netfilter/nf_flow_table.h | 21 +++++++
 include/net/netns/flow_table.h        | 14 +++++
 net/netfilter/Kconfig                 |  9 +++
 net/netfilter/Makefile                |  1 +
 net/netfilter/nf_flow_table_core.c    | 62 ++++++++++++++++++++-
 net/netfilter/nf_flow_table_offload.c | 17 +++++-
 net/netfilter/nf_flow_table_procfs.c  | 80 +++++++++++++++++++++++++++
 8 files changed, 206 insertions(+), 4 deletions(-)
 create mode 100644 include/net/netns/flow_table.h
 create mode 100644 net/netfilter/nf_flow_table_procfs.c
include/net/net_namespace.h +6 -0
index 2ba326f9e004d..c47baa623ba58 100644
@@ -26,6 +26,9 @@
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 #include <net/netns/conntrack.h>
 #endif
+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
+#include <net/netns/flow_table.h>
+#endif
 #include <net/netns/nftables.h>
 #include <net/netns/xfrm.h>
 #include <net/netns/mpls.h>
@@ -138,6 +141,9 @@ struct net {
 #if defined(CONFIG_NF_TABLES) || defined(CONFIG_NF_TABLES_MODULE)
 	struct netns_nftables	nft;
 #endif
+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
+	struct netns_ft ft;
+#endif
 #endif
 #ifdef CONFIG_WEXT_CORE
 	struct sk_buff_head	wext_nlevents;
include/net/netfilter/nf_flow_table.h +21 -0
index dabd84fa3fd36..6cc0cfbf69b86 100644
@@ -334,4 +334,25 @@ static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
 	return 0;
 }
 
+#define NF_FLOW_TABLE_STAT_INC(net, count) __this_cpu_inc((net)->ft.stat->count)
+#define NF_FLOW_TABLE_STAT_DEC(net, count) __this_cpu_dec((net)->ft.stat->count)
+#define NF_FLOW_TABLE_STAT_INC_ATOMIC(net, count)	\
+	this_cpu_inc((net)->ft.stat->count)
+#define NF_FLOW_TABLE_STAT_DEC_ATOMIC(net, count)	\
+	this_cpu_dec((net)->ft.stat->count)
+
+#ifdef CONFIG_NF_FLOW_TABLE_PROCFS
+int nf_flow_table_init_proc(struct net *net);
+void nf_flow_table_fini_proc(struct net *net);
+#else
+static inline int nf_flow_table_init_proc(struct net *net)
+{
+	return 0;
+}
+
+static inline void nf_flow_table_fini_proc(struct net *net)
+{
+}
+#endif /* CONFIG_NF_FLOW_TABLE_PROCFS */
+
 #endif /* _NF_FLOW_TABLE_H */
include/net/netns/flow_table.h new file +14 -0
new file mode 100644
index 0000000000000..1c5fc657e2675
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __NETNS_FLOW_TABLE_H
+#define __NETNS_FLOW_TABLE_H
+
+struct nf_flow_table_stat {
+	unsigned int count_wq_add;
+	unsigned int count_wq_del;
+	unsigned int count_wq_stats;
+};
+
+struct netns_ft {
+	struct nf_flow_table_stat __percpu *stat;
+};
+#endif
net/netfilter/Kconfig +9 -0
index 4f645d51c2573..f02ebe4609650 100644
@@ -728,6 +728,15 @@ config NF_FLOW_TABLE
 
 	  To compile it as a module, choose M here.
 
+config NF_FLOW_TABLE_PROCFS
+	bool "Supply flow table statistics in procfs"
+	default y
+	depends on PROC_FS
+	depends on SYSCTL
+	help
+	  This option enables for the flow table offload statistics
+	  to be shown in procfs under net/netfilter/nf_flowtable.
+
 config NETFILTER_XTABLES
 	tristate "Netfilter Xtables support (required for ip_tables)"
 	default m if NETFILTER_ADVANCED=n
net/netfilter/Makefile +1 -0
index aab20e575ecd8..3f77f20ae39e4 100644
@@ -124,6 +124,7 @@ obj-$(CONFIG_NFT_FWD_NETDEV)	+= nft_fwd_netdev.o
 obj-$(CONFIG_NF_FLOW_TABLE)	+= nf_flow_table.o
 nf_flow_table-objs		:= nf_flow_table_core.o nf_flow_table_ip.o \
 				   nf_flow_table_offload.o
+nf_flow_table-$(CONFIG_NF_FLOW_TABLE_PROCFS) += nf_flow_table_procfs.o
 
 obj-$(CONFIG_NF_FLOW_TABLE_INET) += nf_flow_table_inet.o
 
net/netfilter/nf_flow_table_core.c +61 -1

75 lines not on this page · raw message

net/netfilter/nf_flow_table_offload.c +14 -3
index 336f282a221fd..6ac1ebe17456d 100644
@@ -953,17 +953,22 @@ static void flow_offload_work_stats(struct flow_offload_work *offload)
 static void flow_offload_work_handler(struct work_struct *work)
 {
 	struct flow_offload_work *offload;
+	struct net *net;
 
 	offload = container_of(work, struct flow_offload_work, work);
+	net = read_pnet(&offload->flowtable->net);
 	switch (offload->cmd) {
 		case FLOW_CLS_REPLACE:
 			flow_offload_work_add(offload);
+			NF_FLOW_TABLE_STAT_DEC_ATOMIC(net, count_wq_add);
 			break;
 		case FLOW_CLS_DESTROY:
 			flow_offload_work_del(offload);
+			NF_FLOW_TABLE_STAT_DEC_ATOMIC(net, count_wq_del);
 			break;
 		case FLOW_CLS_STATS:
 			flow_offload_work_stats(offload);
+			NF_FLOW_TABLE_STAT_DEC_ATOMIC(net, count_wq_stats);
 			break;
 		default:
 			WARN_ON_ONCE(1);
@@ -975,12 +980,18 @@ static void flow_offload_work_handler(struct work_struct *work)
 
 static void flow_offload_queue_work(struct flow_offload_work *offload)
 {
-	if (offload->cmd == FLOW_CLS_REPLACE)
+	struct net *net = read_pnet(&offload->flowtable->net);
+
+	if (offload->cmd == FLOW_CLS_REPLACE) {
+		NF_FLOW_TABLE_STAT_INC(net, count_wq_add);
 		queue_work(nf_flow_offload_add_wq, &offload->work);
-	else if (offload->cmd == FLOW_CLS_DESTROY)
+	} else if (offload->cmd == FLOW_CLS_DESTROY) {
+		NF_FLOW_TABLE_STAT_INC(net, count_wq_del);
 		queue_work(nf_flow_offload_del_wq, &offload->work);
-	else
+	} else {
+		NF_FLOW_TABLE_STAT_INC(net, count_wq_stats);
 		queue_work(nf_flow_offload_stats_wq, &offload->work);
+	}
 }
 
 static struct flow_offload_work *
net/netfilter/nf_flow_table_procfs.c new file +80 -0

80 lines not on this page · raw message

Signature · 1 line
2.43.0
author maintainer
#20 lore raw

PATCH 20/71 netfilter: flowtable: validate pppoe header

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 87b3593bed1868b2d9fe096c01bcdf0ea86cbebf ]

Ensure there is sufficient room to access the protocol field of the PPPoe header. Validate it once before the flowtable lookup, then use a helper function to access protocol field.

Reported-by [email protected]
Fixes 72efd585f714 ("netfilter: flowtable: add pppoe support")
---
 include/net/netfilter/nf_flow_table.h | 12 +++++++++++-
 net/netfilter/nf_flow_table_inet.c    |  3 ++-
 net/netfilter/nf_flow_table_ip.c      |  8 +++++---
 3 files changed, 18 insertions(+), 5 deletions(-)
include/net/netfilter/nf_flow_table.h +11 -1
index 6cc0cfbf69b86..8e98fb8edff8d 100644
@@ -318,7 +318,7 @@ int nf_flow_rule_route_ipv6(struct net *net, const struct flow_offload *flow,
 int nf_flow_table_offload_init(void);
 void nf_flow_table_offload_exit(void);
 
-static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
+static inline __be16 __nf_flow_pppoe_proto(const struct sk_buff *skb)
 {
 	__be16 proto;
 
@@ -334,6 +334,16 @@ static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb)
 	return 0;
 }
 
+static inline bool nf_flow_pppoe_proto(struct sk_buff *skb, __be16 *inner_proto)
+{
+	if (!pskb_may_pull(skb, PPPOE_SES_HLEN))
+		return false;
+
+	*inner_proto = __nf_flow_pppoe_proto(skb);
+
+	return true;
+}
+
 #define NF_FLOW_TABLE_STAT_INC(net, count) __this_cpu_inc((net)->ft.stat->count)
 #define NF_FLOW_TABLE_STAT_DEC(net, count) __this_cpu_dec((net)->ft.stat->count)
 #define NF_FLOW_TABLE_STAT_INC_ATOMIC(net, count)	\
net/netfilter/nf_flow_table_inet.c +2 -1
index 280fdd32965f6..6783ea220f8fe 100644
@@ -21,7 +21,8 @@ nf_flow_offload_inet_hook(void *priv, struct sk_buff *skb,
 		proto = veth->h_vlan_encapsulated_proto;
 		break;
 	case htons(ETH_P_PPP_SES):
-		proto = nf_flow_pppoe_proto(skb);
+		if (!nf_flow_pppoe_proto(skb, &proto))
+			return NF_ACCEPT;
 		break;
 	default:
 		proto = skb->protocol;
net/netfilter/nf_flow_table_ip.c +5 -3
index 28026467b54cd..448956fb52f69 100644
@@ -246,10 +246,11 @@ static unsigned int nf_flow_xmit_xfrm(struct sk_buff *skb,
 	return NF_STOLEN;
 }
 
-static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
+static bool nf_flow_skb_encap_protocol(struct sk_buff *skb, __be16 proto,
 				       u32 *offset)
 {
 	struct vlan_ethhdr *veth;
+	__be16 inner_proto;
 
 	switch (skb->protocol) {
 	case htons(ETH_P_8021Q):
@@ -260,7 +261,8 @@ static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto,
 		}
 		break;
 	case htons(ETH_P_PPP_SES):
-		if (nf_flow_pppoe_proto(skb) == proto) {
+		if (nf_flow_pppoe_proto(skb, &inner_proto) &&
+		    inner_proto == proto) {
 			*offset += PPPOE_SES_HLEN;
 			return true;
 		}
@@ -289,7 +291,7 @@ static void nf_flow_encap_pop(struct sk_buff *skb,
 			skb_reset_network_header(skb);
 			break;
 		case htons(ETH_P_PPP_SES):
-			skb->protocol = nf_flow_pppoe_proto(skb);
+			skb->protocol = __nf_flow_pppoe_proto(skb);
 			skb_pull(skb, PPPOE_SES_HLEN);
 			skb_reset_network_header(skb);
 			break;
Signature · 1 line
2.43.0
author maintainer
#21 lore raw

PATCH 21/71 netfilter: flowtable: incorrect pppoe tuple

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 6db5dc7b351b9569940cd1cf445e237c42cd6d27 ]

pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path.

Fixes 72efd585f714 ("netfilter: flowtable: add pppoe support")
---
 net/netfilter/nf_flow_table_ip.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/netfilter/nf_flow_table_ip.c +1 -1
index 448956fb52f69..f3227f9316969 100644
@@ -156,7 +156,7 @@ static void nf_flow_tuple_encap(struct sk_buff *skb,
 		tuple->encap[i].proto = skb->protocol;
 		break;
 	case htons(ETH_P_PPP_SES):
-		phdr = (struct pppoe_hdr *)skb_mac_header(skb);
+		phdr = (struct pppoe_hdr *)skb_network_header(skb);
 		tuple->encap[i].id = ntohs(phdr->sid);
 		tuple->encap[i].proto = skb->protocol;
 		break;
Signature · 1 line
2.43.0
author maintainer
#22 lore raw

PATCH 22/71 af_unix: Call manage_oob() for every skb in unix_stream_read_generic().

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 283454c8a123072e5c386a5a2b5fc576aa455b6f ]

When we call recv() for AF_UNIX socket, we first peek one skb and calls manage_oob() to check if the skb is sent with MSG_OOB.

However, when we fetch the next (and the following) skb, manage_oob() is not called now, leading a wrong behaviour.

Let's say a socket send()s "hello" with MSG_OOB and the peer tries to recv() 5 bytes with MSG_PEEK. Here, we should get only "hell" without 'o', but actually not:

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

from socket import *
c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.send(b'hello', MSG_OOB)

5

Quoted 1 line
Quoted 1 line
Quoted 1 line

c2.recv(5, MSG_PEEK)

b'hello'

The first skb fills 4 bytes, and the next skb is peeked but not properly checked by manage_oob().

Let's move up the again label to call manage_oob() for evry skb.

With this patch:

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

from socket import *
c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.send(b'hello', MSG_OOB)

5

Quoted 1 line
Quoted 1 line
Quoted 1 line

c2.recv(5, MSG_PEEK)

b'hell'

---
 net/unix/af_unix.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/unix/af_unix.c +1 -1
index 628d97c195a7e..e2a2e22d210f6 100644
@@ -2644,6 +2644,7 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
 		last = skb = skb_peek(&sk->sk_receive_queue);
 		last_len = last ? last->len : 0;
 
+again:
 #if IS_ENABLED(CONFIG_AF_UNIX_OOB)
 		if (skb) {
 			skb = manage_oob(skb, sk, flags, copied);
@@ -2655,7 +2656,6 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
 			}
 		}
 #endif
-again:
 		if (skb == NULL) {
 			if (copied >= target)
 				goto unlock;
Signature · 1 line
2.43.0
author maintainer
#23 lore raw

PATCH 23/71 af_unix: Dont peek OOB data without MSG_OOB.

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit 22dd70eb2c3d754862964377a75abafd3167346b ]

Currently, we can read OOB data without MSG_OOB by using MSG_PEEK when OOB data is sitting on the front row, which is apparently wrong.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

from socket import *
c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.send(b'a', MSG_OOB)

1

Quoted 1 line
Quoted 1 line
Quoted 1 line

c2.recv(1, MSG_PEEK | MSG_DONTWAIT)

b'a'

If manage_oob() is called when no data has been copied, we only check if the socket enables SO_OOBINLINE or MSG_PEEK is not used. Otherwise, the skb is returned as is.

However, here we should return NULL if MSG_PEEK is set and no data has been copied.

Also, in such a case, we should not jump to the redo label because we will be caught in the loop and hog the CPU until normal data comes in.

Then, we need to handle skb == NULL case with the if-clause below the manage_oob() block.

With this patch:

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

from socket import *
c1, c2 = socketpair(AF_UNIX, SOCK_STREAM)
c1.send(b'a', MSG_OOB)

1

Quoted 1 line
Quoted 1 line
Quoted 1 line

c2.recv(1, MSG_PEEK | MSG_DONTWAIT)

Traceback (most recent call last):

    File "<stdin>", line 1, in <module>

BlockingIOError: [Errno 11] Resource temporarily unavailable

---
 net/unix/af_unix.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
net/unix/af_unix.c +5 -5
index e2a2e22d210f6..f66f867049015 100644
@@ -2565,7 +2565,9 @@ static struct sk_buff *manage_oob(struct sk_buff *skb, struct sock *sk,
 					WRITE_ONCE(u->oob_skb, NULL);
 					consume_skb(skb);
 				}
-			} else if (!(flags & MSG_PEEK)) {
+			} else if (flags & MSG_PEEK) {
+				skb = NULL;
+			} else {
 				skb_unlink(skb, &sk->sk_receive_queue);
 				WRITE_ONCE(u->oob_skb, NULL);
 				if (!WARN_ON_ONCE(skb_unref(skb)))
@@ -2648,11 +2650,9 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state,
 #if IS_ENABLED(CONFIG_AF_UNIX_OOB)
 		if (skb) {
 			skb = manage_oob(skb, sk, flags, copied);
-			if (!skb) {
+			if (!skb && copied) {
 				unix_state_unlock(sk);
-				if (copied)
-					break;
-				goto redo;
+				break;
 			}
 		}
 #endif
Signature · 1 line
2.43.0
author maintainer
#24 lore raw

PATCH 24/71 tun: limit printing rate when illegal packet received by tun dev

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lei Chen <[email protected]>

[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ]

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663

    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018

#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

---
 drivers/net/tun.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/net/tun.c +10 -8
index 42bf0a3ec632e..f0e34b2b072ee 100644
@@ -2096,14 +2096,16 @@ static ssize_t tun_put_user(struct tun_struct *tun,
 					    tun_is_little_endian(tun), true,
 					    vlan_hlen)) {
 			struct skb_shared_info *sinfo = skb_shinfo(skb);
-			pr_err("unexpected GSO type: "
-			       "0x%x, gso_size %d, hdr_len %d\n",
-			       sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size),
-			       tun16_to_cpu(tun, gso.hdr_len));
-			print_hex_dump(KERN_ERR, "tun: ",
-				       DUMP_PREFIX_NONE,
-				       16, 1, skb->head,
-				       min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true);
+
+			if (net_ratelimit()) {
+				netdev_err(tun->dev, "unexpected GSO type: 0x%x, gso_size %d, hdr_len %d\n",
+					   sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size),
+					   tun16_to_cpu(tun, gso.hdr_len));
+				print_hex_dump(KERN_ERR, "tun: ",
+					       DUMP_PREFIX_NONE,
+					       16, 1, skb->head,
+					       min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true);
+			}
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
Signature · 1 line
2.43.0
author maintainer
#25 lore raw

PATCH 25/71 net: dsa: mt7530: fix mirroring frames received on local port

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arınç ÜNAL <[email protected]>

[ Upstream commit d59cf049c8378677053703e724808836f180888e ]

This switch intellectual property provides a bit on the ARL global control register which controls allowing mirroring frames which are received on the local port (monitor port). This bit is unset after reset.

This ability must be enabled to fully support the port mirroring feature on this switch intellectual property.

Therefore, this patch fixes the traffic not being reflected on a port, which would be configured like below:

tc qdisc add dev swp0 clsact

tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0

As a side note, this configuration provides the hairpinning feature for a single port.

Fixes 37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
---
 drivers/net/dsa/mt7530.c | 6 ++++++
 drivers/net/dsa/mt7530.h | 4 ++++
 2 files changed, 10 insertions(+)
drivers/net/dsa/mt7530.c +6 -0
index f291d1e70f807..053f1b4aa324c 100644
@@ -2437,6 +2437,9 @@ mt7530_setup(struct dsa_switch *ds)
 			   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 
+	/* Allow mirroring frames received on the local port (monitor port). */
+	mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
 	ret = mt7530_setup_vlan0(priv);
 	if (ret)
@@ -2553,6 +2556,9 @@ mt7531_setup_common(struct dsa_switch *ds)
 			   PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
 	}
 
+	/* Allow mirroring frames received on the local port (monitor port). */
+	mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
 	/* Flush the FDB table */
 	ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
 	if (ret < 0)
drivers/net/dsa/mt7530.h +4 -0
index 299a26ad5809c..0247a58d5554c 100644
@@ -32,6 +32,10 @@ enum mt753x_id {
 #define SYSC_REG_RSTCTRL		0x34
 #define  RESET_MCM			BIT(2)
 
+/* Register for ARL global control */
+#define MT753X_AGC			0xc
+#define  LOCAL_EN			BIT(7)
+
 /* Registers to mac forward control for unknown frames */
 #define MT7530_MFC			0x10
 #define  BC_FFP(x)			(((x) & 0xff) << 24)
Signature · 1 line
2.43.0
author maintainer
#26 lore raw

PATCH 26/71 net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Siddharth Vadapalli <[email protected]>

[ Upstream commit c24cd679b075b0e953ea167b0aa2b2d59e4eba7f ]

The TX and RX DMA Channels used by the driver to exchange data with CPSW are not guaranteed to be in a clean state during driver initialization. The Bootloader could have used the same DMA Channels without cleaning them up in the event of failure. Thus, reset and disable the DMA Channels to ensure that they are in a clean state before using them.

Fixes 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/net/ethernet/ti/am65-cpsw-nuss.c +18 -0
index f94d6d322df42..4bd57b79a023b 100644
@@ -2535,6 +2535,8 @@ static void am65_cpsw_unregister_devlink(struct am65_cpsw_common *common)
 
 static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common)
 {
+	struct am65_cpsw_rx_chn *rx_chan = &common->rx_chns;
+	struct am65_cpsw_tx_chn *tx_chan = common->tx_chns;
 	struct device *dev = common->dev;
 	struct devlink_port *dl_port;
 	struct am65_cpsw_port *port;
@@ -2553,6 +2555,22 @@ static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common)
 		return ret;
 	}
 
+	/* The DMA Channels are not guaranteed to be in a clean state.
+	 * Reset and disable them to ensure that they are back to the
+	 * clean state and ready to be used.
+	 */
+	for (i = 0; i < common->tx_ch_num; i++) {
+		k3_udma_glue_reset_tx_chn(tx_chan[i].tx_chn, &tx_chan[i],
+					  am65_cpsw_nuss_tx_cleanup);
+		k3_udma_glue_disable_tx_chn(tx_chan[i].tx_chn);
+	}
+
+	for (i = 0; i < AM65_CPSW_MAX_RX_FLOWS; i++)
+		k3_udma_glue_reset_rx_chn(rx_chan->rx_chn, i, rx_chan,
+					  am65_cpsw_nuss_rx_cleanup, !!i);
+
+	k3_udma_glue_disable_rx_chn(rx_chan->rx_chn);
+
 	ret = am65_cpsw_nuss_register_devlink(common);
 	if (ret)
 		return ret;
Signature · 1 line
2.43.0
author maintainer
#27 lore raw

PATCH 27/71 RDMA/rxe: Fix the problem "mutex_destroy missing"

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yanjun.Zhu <[email protected]>

[ Upstream commit 481047d7e8391d3842ae59025806531cdad710d9 ]

When a mutex lock is not used any more, the function mutex_destroy should be called to mark the mutex lock uninitialized.

---
 drivers/infiniband/sw/rxe/rxe.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/infiniband/sw/rxe/rxe.c +2 -0
index 8e0f9c489cab2..f6ef782ce75c1 100644
@@ -35,6 +35,8 @@ void rxe_dealloc(struct ib_device *ib_dev)
 
 	if (rxe->tfm)
 		crypto_free_shash(rxe->tfm);
+
+	mutex_destroy(&rxe->usdev_lock);
 }
 
 /* initialize rxe device parameters */
Signature · 1 line
2.43.0
author maintainer
#28 lore raw

PATCH 28/71 RDMA/cm: Print the old state when cm_destroy_id gets timeout

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Zhang <[email protected]>

[ Upstream commit b68e1acb5834ed1a2ad42d9d002815a8bae7c0b6 ]

The old state is helpful for debugging, as the current state is always IB_CM_IDLE when timeout happens.

Fixes 96d9cbe2f2ff ("RDMA/cm: add timeout to cm_destroy_id wait")
---
 drivers/infiniband/core/cm.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/infiniband/core/cm.c +7 -4
index 504e1adf1997a..c8a7fe5fbc233 100644
@@ -1033,23 +1033,26 @@ static void cm_reset_to_idle(struct cm_id_private *cm_id_priv)
 	}
 }
 
-static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id)
+static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id,
+						enum ib_cm_state old_state)
 {
 	struct cm_id_private *cm_id_priv;
 
 	cm_id_priv = container_of(cm_id, struct cm_id_private, id);
-	pr_err("%s: cm_id=%p timed out. state=%d refcnt=%d\n", __func__,
-	       cm_id, cm_id->state, refcount_read(&cm_id_priv->refcount));
+	pr_err("%s: cm_id=%p timed out. state %d -> %d, refcnt=%d\n", __func__,
+	       cm_id, old_state, cm_id->state, refcount_read(&cm_id_priv->refcount));
 }
 
 static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
 {
 	struct cm_id_private *cm_id_priv;
+	enum ib_cm_state old_state;
 	struct cm_work *work;
 	int ret;
 
 	cm_id_priv = container_of(cm_id, struct cm_id_private, id);
 	spin_lock_irq(&cm_id_priv->lock);
+	old_state = cm_id->state;
 retest:
 	switch (cm_id->state) {
 	case IB_CM_LISTEN:
@@ -1158,7 +1161,7 @@ static void cm_destroy_id(struct ib_cm_id *cm_id, int err)
 						  msecs_to_jiffies(
 						  CM_DESTROY_ID_WAIT_TIMEOUT));
 		if (!ret) /* timeout happened */
-			cm_destroy_id_wait_timeout(cm_id);
+			cm_destroy_id_wait_timeout(cm_id, old_state);
 	} while (!ret);
 
 	while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
Signature · 1 line
2.43.0
author maintainer
#29 lore raw

PATCH 29/71 RDMA/mlx5: Fix port number for counter query in multi-port configuration

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michael Guralnik <[email protected]>

[ Upstream commit be121ffb384f53e966ee7299ffccc6eeb61bc73d ]

Set the correct port when querying PPCNT in multi-port configuration. Distinguish between cases where switchdev mode was enabled to multi-port configuration and don't overwrite the queried port to 1 in multi-port case.

---
 drivers/infiniband/hw/mlx5/mad.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/infiniband/hw/mlx5/mad.c +2 -1
index f6f2df855c2ed..1082841807759 100644
@@ -166,7 +166,8 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u32 port_num,
 		mdev = dev->mdev;
 		mdev_port_num = 1;
 	}
-	if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) {
+	if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1 &&
+	    !mlx5_core_mp_enabled(mdev)) {
 		/* set local port to one for Function-Per-Port HCA. */
 		mdev = dev->mdev;
 		mdev_port_num = 1;
Signature · 1 line
2.43.0
author maintainer
#30 lore raw

PATCH 30/71 s390/qdio: handle deferred cc1

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 607638faf2ff1cede37458111496e7cc6c977f6f ]

A deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as I/O error, resulting in a failed QDIO setup. This can happen for example when a path verification request arrives at the same time as QDIO setup I/O is started.

Fix this by retrying the QDIO setup I/O when a cc1 response is received.

Note that since

commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")

deferred cc1 responses are much more likely to occur. See the commit message of the latter for more background information.

Fixes 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
---
 drivers/s390/cio/qdio_main.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)
drivers/s390/cio/qdio_main.c +23 -5
index 45e810c6ea3ba..6c186bbd84417 100644
@@ -679,8 +679,8 @@ static void qdio_handle_activate_check(struct qdio_irq *irq_ptr,
 	lgr_info_log();
 }
 
-static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
-				      int dstat)
+static int qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
+				     int dstat, int dcc)
 {
 	DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
 
@@ -688,15 +688,18 @@ static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat,
 		goto error;
 	if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
 		goto error;
+	if (dcc == 1)
+		return -EAGAIN;
 	if (!(dstat & DEV_STAT_DEV_END))
 		goto error;
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
-	return;
+	return 0;
 
 error:
 	DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
 	DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+	return -EIO;
 }
 
 /* qdio interrupt handler */
@@ -705,7 +708,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 {
 	struct qdio_irq *irq_ptr = cdev->private->qdio_data;
 	struct subchannel_id schid;
-	int cstat, dstat;
+	int cstat, dstat, rc, dcc;
 
 	if (!intparm || !irq_ptr) {
 		ccw_device_get_schid(cdev, &schid);
@@ -725,10 +728,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	qdio_irq_check_sense(irq_ptr, irb);
 	cstat = irb->scsw.cmd.cstat;
 	dstat = irb->scsw.cmd.dstat;
+	dcc   = scsw_cmd_is_valid_cc(&irb->scsw) ? irb->scsw.cmd.cc : 0;
+	rc    = 0;
 
 	switch (irq_ptr->state) {
 	case QDIO_IRQ_STATE_INACTIVE:
-		qdio_establish_handle_irq(irq_ptr, cstat, dstat);
+		rc = qdio_establish_handle_irq(irq_ptr, cstat, dstat, dcc);
 		break;
 	case QDIO_IRQ_STATE_CLEANUP:
 		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
@@ -742,12 +747,25 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		if (cstat || dstat)
 			qdio_handle_activate_check(irq_ptr, intparm, cstat,
 						   dstat);
+		else if (dcc == 1)
+			rc = -EAGAIN;
 		break;
 	case QDIO_IRQ_STATE_STOPPED:
 		break;
 	default:
 		WARN_ON_ONCE(1);
 	}
+
+	if (rc == -EAGAIN) {
+		DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qint retry");
+		rc = ccw_device_start(cdev, irq_ptr->ccw, intparm, 0, 0);
+		if (!rc)
+			return;
+		DBF_ERROR("%4x RETRY ERR", irq_ptr->schid.sch_no);
+		DBF_ERROR("rc:%4x", rc);
+		qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+	}
+
 	wake_up(&cdev->private->wait_q);
 }
 
Signature · 1 line
2.43.0
author maintainer
#31 lore raw

PATCH 31/71 s390/cio: fix race condition during online processing

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Oberparleiter <[email protected]>

[ Upstream commit 2d8527f2f911fab84aec04df4788c0c23af3df48 ]

A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV.

The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated.

Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state.

Note that since:

commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")

path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring.

Fixes 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
---
 drivers/s390/cio/device.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/s390/cio/device.c +8 -5
index a111154a90465..c16f18cfeed72 100644
@@ -360,10 +360,8 @@ int ccw_device_set_online(struct ccw_device *cdev)
 
 	spin_lock_irq(cdev->ccwlock);
 	ret = ccw_device_online(cdev);
-	spin_unlock_irq(cdev->ccwlock);
-	if (ret == 0)
-		wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
-	else {
+	if (ret) {
+		spin_unlock_irq(cdev->ccwlock);
 		CIO_MSG_EVENT(0, "ccw_device_online returned %d, "
 			      "device 0.%x.%04x\n",
 			      ret, cdev->private->dev_id.ssid,
@@ -372,7 +370,12 @@ int ccw_device_set_online(struct ccw_device *cdev)
 		put_device(&cdev->dev);
 		return ret;
 	}
-	spin_lock_irq(cdev->ccwlock);
+	/* Wait until a final state is reached */
+	while (!dev_fsm_final_state(cdev)) {
+		spin_unlock_irq(cdev->ccwlock);
+		wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
+		spin_lock_irq(cdev->ccwlock);
+	}
 	/* Check if online processing was successful */
 	if ((cdev->private->state != DEV_STATE_ONLINE) &&
 	    (cdev->private->state != DEV_STATE_W4SENSE)) {
Signature · 1 line
2.43.0
author maintainer
#32 lore raw

PATCH 32/71 drm: nv04: Fix out of bounds access

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikhail Kobuk <[email protected]>

[ Upstream commit cf92bb778eda7830e79452c6917efa8474a30c1e ]

When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there.
The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value.

Utilize macros from 'enum nouveau_or' in calls instead of hardcoding.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4")
Fixes 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.")
---
 drivers/gpu/drm/nouveau/nouveau_bios.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/nouveau/nouveau_bios.c +7 -6
index e8c445eb11004..f63ceb8d3e4ef 100644
@@ -23,6 +23,7 @@
  */
 
 #include "nouveau_drv.h"
+#include "nouveau_bios.h"
 #include "nouveau_reg.h"
 #include "dispnv04/hw.h"
 #include "nouveau_encoder.h"
@@ -1675,7 +1676,7 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf)
 	 */
 	if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) {
 		if (*conn == 0xf2005014 && *conf == 0xffffffff) {
-			fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1);
+			fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, DCB_OUTPUT_B);
 			return false;
 		}
 	}
@@ -1761,26 +1762,26 @@ fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios)
 #ifdef __powerpc__
 	/* Apple iMac G4 NV17 */
 	if (of_machine_is_compatible("PowerMac4,5")) {
-		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1);
-		fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2);
+		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, DCB_OUTPUT_B);
+		fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, DCB_OUTPUT_C);
 		return;
 	}
 #endif
 
 	/* Make up some sane defaults */
 	fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG,
-			     bios->legacy.i2c_indices.crt, 1, 1);
+			     bios->legacy.i2c_indices.crt, 1, DCB_OUTPUT_B);
 
 	if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0)
 		fabricate_dcb_output(dcb, DCB_OUTPUT_TV,
 				     bios->legacy.i2c_indices.tv,
-				     all_heads, 0);
+				     all_heads, DCB_OUTPUT_A);
 
 	else if (bios->tmds.output0_script_ptr ||
 		 bios->tmds.output1_script_ptr)
 		fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS,
 				     bios->legacy.i2c_indices.panel,
-				     all_heads, 1);
+				     all_heads, DCB_OUTPUT_B);
 }
 
 static int
Signature · 1 line
2.43.0
author maintainer
#33 lore raw

PATCH 33/71 drm/panel: visionox-rm69299: dont unregister DSI device

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

[ Upstream commit 9e4d3f4f34455abbaa9930bf6b7575a5cd081496 ]

The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister().

Fixes c7f66d32dd43 ("drm/panel: add support for rm69299 visionox panel")
---
 drivers/gpu/drm/panel/panel-visionox-rm69299.c | 2 --
 1 file changed, 2 deletions(-)
drivers/gpu/drm/panel/panel-visionox-rm69299.c +0 -2
index eb43503ec97b3..6134432e4918d 100644
@@ -261,8 +261,6 @@ static int visionox_rm69299_remove(struct mipi_dsi_device *dsi)
 	struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
 
 	mipi_dsi_detach(ctx->dsi);
-	mipi_dsi_device_unregister(ctx->dsi);
-
 	drm_panel_remove(&ctx->panel);
 	return 0;
 }
Signature · 1 line
2.43.0
author maintainer
#34 lore raw

PATCH 34/71 clk: Remove prepare_lock hold assertion in __clk_release()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <[email protected]>

[ Upstream commit 8358a76cfb47c9a5af627a0c4e7168aa14fa25f6 ]

Removing this assertion lets us move the kref_put() call outside the prepare_lock section. We don't need to hold the prepare_lock here to free memory and destroy the clk_core structure. We've already unlinked the clk from the clk tree and by the time the release function runs nothing holds a reference to the clk_core anymore so anything with the pointer can't access the memory that's being freed anyway. Way back in commit 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock") we didn't need to have this assertion either.

Fixes 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock")
Cc Krzysztof Kozlowski <[email protected]>
---
 drivers/clk/clk.c | 2 --
 1 file changed, 2 deletions(-)
drivers/clk/clk.c +0 -2
index 84397af4fb336..acbe917cbe775 100644
@@ -4047,8 +4047,6 @@ static void __clk_release(struct kref *ref)
 {
 	struct clk_core *core = container_of(ref, struct clk_core, ref);
 
-	lockdep_assert_held(&prepare_lock);
-
 	clk_core_free_parent_map(core);
 	kfree_const(core->name);
 	kfree(core);
Signature · 1 line
2.43.0
author maintainer
#35 lore raw

PATCH 35/71 clk: Mark all_lists as const

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <[email protected]>

[ Upstream commit 75061a6ff49ba3482c6319ded0c26e6a526b0967 ]

This list array doesn't change at runtime. Mark it const to move to RO memory.

Stable-dep-of: e581cf5d2162 ("clk: Get runtime PM before walking tree during disable_unused")

---
 drivers/clk/clk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/clk.c +2 -2
index acbe917cbe775..0d93537d46c34 100644
@@ -37,7 +37,7 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
-static struct hlist_head *all_lists[] = {
+static const struct hlist_head *all_lists[] = {
 	&clk_root_list,
 	&clk_orphan_list,
 	NULL,
@@ -4104,7 +4104,7 @@ static void clk_core_evict_parent_cache_subtree(struct clk_core *root,
 /* Remove this clk from all parent caches */
 static void clk_core_evict_parent_cache(struct clk_core *core)
 {
-	struct hlist_head **lists;
+	const struct hlist_head **lists;
 	struct clk_core *root;
 
 	lockdep_assert_held(&prepare_lock);
Signature · 1 line
2.43.0
author maintainer
#36 lore raw

PATCH 36/71 clk: remove extra empty line

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Claudiu Beznea <[email protected]>

[ Upstream commit 79806d338829b2bf903480428d8ce5aab8e2d24b ]

Remove extra empty line.

Stable-dep-of: e581cf5d2162 ("clk: Get runtime PM before walking tree during disable_unused")

---
 drivers/clk/clk.c | 1 -
 1 file changed, 1 deletion(-)
drivers/clk/clk.c +0 -1
index 0d93537d46c34..52877fb06e181 100644
@@ -3653,7 +3653,6 @@ static int __clk_core_init(struct clk_core *core)
 
 	clk_core_reparent_orphans_nolock();
 
-
 	kref_init(&core->ref);
 out:
 	clk_pm_runtime_put(core);
Signature · 1 line
2.43.0
author maintainer
#37 lore raw

PATCH 37/71 clk: Print an info line before disabling unused clocks

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konrad Dybcio <[email protected]>

[ Upstream commit 12ca59b91d04df32e41be5a52f0cabba912c11de ]

Currently, the regulator framework informs us before calling into their unused cleanup paths, which eases at least some debugging. The same could be beneficial for clocks, so that random shutdowns shortly after most initcalls are done can be less of a guess.

Add a pr_info before disabling unused clocks to do so.

Stable-dep-of: e581cf5d2162 ("clk: Get runtime PM before walking tree during disable_unused")

---
 drivers/clk/clk.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/clk/clk.c +2 -0
index 52877fb06e181..de1235d7b659a 100644
@@ -1330,6 +1330,8 @@ static int __init clk_disable_unused(void)
 		return 0;
 	}
 
+	pr_info("clk: Disabling unused clocks\n");
+
 	clk_prepare_lock();
 
 	hlist_for_each_entry(core, &clk_root_list, child_node)
Signature · 1 line
2.43.0
author maintainer
#38 lore raw

PATCH 38/71 clk: Initialize struct clk_core kref earlier

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <[email protected]>

[ Upstream commit 9d05ae531c2cff20d5d527f04e28d28e04379929 ]

Initialize this kref once we allocate memory for the struct clk_core so that we can reuse the release function to free any memory associated with the structure. This mostly consolidates code, but also clarifies that the kref lifetime exists once the container structure (struct clk_core) is allocated instead of leaving it in a half-baked state for most of __clk_core_init().

Stable-dep-of: e581cf5d2162 ("clk: Get runtime PM before walking tree during disable_unused")

---
 drivers/clk/clk.c | 28 +++++++++++++---------------
 1 file changed, 13 insertions(+), 15 deletions(-)
drivers/clk/clk.c +13 -15
index de1235d7b659a..5cbc42882dce4 100644
@@ -3654,8 +3654,6 @@ static int __clk_core_init(struct clk_core *core)
 	}
 
 	clk_core_reparent_orphans_nolock();
-
-	kref_init(&core->ref);
 out:
 	clk_pm_runtime_put(core);
 unlock:
@@ -3884,6 +3882,16 @@ static void clk_core_free_parent_map(struct clk_core *core)
 	kfree(core->parents);
 }
 
+/* Free memory allocated for a struct clk_core */
+static void __clk_release(struct kref *ref)
+{
+	struct clk_core *core = container_of(ref, struct clk_core, ref);
+
+	clk_core_free_parent_map(core);
+	kfree_const(core->name);
+	kfree(core);
+}
+
 static struct clk *
 __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 {
@@ -3904,6 +3912,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 		goto fail_out;
 	}
 
+	kref_init(&core->ref);
+
 	core->name = kstrdup_const(init->name, GFP_KERNEL);
 	if (!core->name) {
 		ret = -ENOMEM;
@@ -3958,12 +3968,10 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 	hw->clk = NULL;
 
 fail_create_clk:
-	clk_core_free_parent_map(core);
 fail_parents:
 fail_ops:
-	kfree_const(core->name);
 fail_name:
-	kfree(core);
+	kref_put(&core->ref, __clk_release);
 fail_out:
 	return ERR_PTR(ret);
 }
@@ -4043,16 +4051,6 @@ int of_clk_hw_register(struct device_node *node, struct clk_hw *hw)
 }
 EXPORT_SYMBOL_GPL(of_clk_hw_register);
 
-/* Free memory allocated for a clock. */
-static void __clk_release(struct kref *ref)
-{
-	struct clk_core *core = container_of(ref, struct clk_core, ref);
-
-	clk_core_free_parent_map(core);
-	kfree_const(core->name);
-	kfree(core);
-}
-
 /*
  * Empty clk_ops for unregistered clocks. These are used temporarily
  * after clk_unregister() was called on a clock and until last clock
Signature · 1 line
2.43.0
author maintainer
#39 lore raw

PATCH 39/71 clk: Get runtime PM before walking tree during disable_unused

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <[email protected]>

[ Upstream commit e581cf5d216289ef292d1a4036d53ce90e122469 ]

Doug reported [1] the following hung task:

 INFO: task swapper/0:1 blocked for more than 122 seconds.
       Not tainted 5.15.149-21875-gf795ebc40eb8 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:swapper/0       state:D stack:    0 pid:    1 ppid:     0 flags:0x00000008
 Call trace:
  __switch_to+0xf4/0x1f4
  __schedule+0x418/0xb80
  schedule+0x5c/0x10c
  rpm_resume+0xe0/0x52c
  rpm_resume+0x178/0x52c
  __pm_runtime_resume+0x58/0x98
  clk_pm_runtime_get+0x30/0xb0
  clk_disable_unused_subtree+0x58/0x208
  clk_disable_unused_subtree+0x38/0x208
  clk_disable_unused_subtree+0x38/0x208
  clk_disable_unused_subtree+0x38/0x208
  clk_disable_unused_subtree+0x38/0x208
  clk_disable_unused+0x4c/0xe4
  do_one_initcall+0xcc/0x2d8
  do_initcall_level+0xa4/0x148
  do_initcalls+0x5c/0x9c
  do_basic_setup+0x24/0x30
  kernel_init_freeable+0xec/0x164
  kernel_init+0x28/0x120
  ret_from_fork+0x10/0x20
 INFO: task kworker/u16:0:9 blocked for more than 122 seconds.
       Not tainted 5.15.149-21875-gf795ebc40eb8 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:kworker/u16:0   state:D stack:    0 pid:    9 ppid:     2 flags:0x00000008
 Workqueue: events_unbound deferred_probe_work_func
 Call trace:
  __switch_to+0xf4/0x1f4
  __schedule+0x418/0xb80
  schedule+0x5c/0x10c
  schedule_preempt_disabled+0x2c/0x48
  __mutex_lock+0x238/0x488
  __mutex_lock_slowpath+0x1c/0x28
  mutex_lock+0x50/0x74
  clk_prepare_lock+0x7c/0x9c
  clk_core_prepare_lock+0x20/0x44
  clk_prepare+0x24/0x30
  clk_bulk_prepare+0x40/0xb0
  mdss_runtime_resume+0x54/0x1c8
  pm_generic_runtime_resume+0x30/0x44
  __genpd_runtime_resume+0x68/0x7c
  genpd_runtime_resume+0x108/0x1f4
  __rpm_callback+0x84/0x144
  rpm_callback+0x30/0x88
  rpm_resume+0x1f4/0x52c
  rpm_resume+0x178/0x52c
  __pm_runtime_resume+0x58/0x98
  __device_attach+0xe0/0x170
  device_initial_probe+0x1c/0x28
  bus_probe_device+0x3c/0x9c
  device_add+0x644/0x814
  mipi_dsi_device_register_full+0xe4/0x170
  devm_mipi_dsi_device_register_full+0x28/0x70
  ti_sn_bridge_probe+0x1dc/0x2c0
  auxiliary_bus_probe+0x4c/0x94
  really_probe+0xcc/0x2c8
  __driver_probe_device+0xa8/0x130
  driver_probe_device+0x48/0x110
  __device_attach_driver+0xa4/0xcc
  bus_for_each_drv+0x8c/0xd8
  __device_attach+0xf8/0x170
  device_initial_probe+0x1c/0x28
  bus_probe_device+0x3c/0x9c
  deferred_probe_work_func+0x9c/0xd8
  process_one_work+0x148/0x518
  worker_thread+0x138/0x350
  kthread+0x138/0x1e0
  ret_from_fork+0x10/0x20

The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread.

This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again.

Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180.

Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed.

---
 drivers/clk/clk.c | 117 +++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 105 insertions(+), 12 deletions(-)
drivers/clk/clk.c +105 -12
index 5cbc42882dce4..a05b5bca64250 100644
@@ -37,6 +37,10 @@ static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+/* List of registered clks that use runtime PM */
+static HLIST_HEAD(clk_rpm_list);
+static DEFINE_MUTEX(clk_rpm_list_lock);
+
 static const struct hlist_head *all_lists[] = {
 	&clk_root_list,
 	&clk_orphan_list,
@@ -59,6 +63,7 @@ struct clk_core {
 	struct clk_hw		*hw;
 	struct module		*owner;
 	struct device		*dev;
+	struct hlist_node	rpm_node;
 	struct device_node	*of_node;
 	struct clk_core		*parent;
 	struct clk_parent_map	*parents;
@@ -129,6 +134,89 @@ static void clk_pm_runtime_put(struct clk_core *core)
 	pm_runtime_put_sync(core->dev);
 }
 
+/**
+ * clk_pm_runtime_get_all() - Runtime "get" all clk provider devices
+ *
+ * Call clk_pm_runtime_get() on all runtime PM enabled clks in the clk tree so
+ * that disabling unused clks avoids a deadlock where a device is runtime PM
+ * resuming/suspending and the runtime PM callback is trying to grab the
+ * prepare_lock for something like clk_prepare_enable() while
+ * clk_disable_unused_subtree() holds the prepare_lock and is trying to runtime
+ * PM resume/suspend the device as well.
+ *
+ * Context: Acquires the 'clk_rpm_list_lock' and returns with the lock held on
+ * success. Otherwise the lock is released on failure.
+ *
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int clk_pm_runtime_get_all(void)
+{
+	int ret;
+	struct clk_core *core, *failed;
+
+	/*
+	 * Grab the list lock to prevent any new clks from being registered
+	 * or unregistered until clk_pm_runtime_put_all().
+	 */
+	mutex_lock(&clk_rpm_list_lock);
+
+	/*
+	 * Runtime PM "get" all the devices that are needed for the clks
+	 * currently registered. Do this without holding the prepare_lock, to
+	 * avoid the deadlock.
+	 */
+	hlist_for_each_entry(core, &clk_rpm_list, rpm_node) {
+		ret = clk_pm_runtime_get(core);
+		if (ret) {
+			failed = core;
+			pr_err("clk: Failed to runtime PM get '%s' for clk '%s'\n",
+			       dev_name(failed->dev), failed->name);
+			goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	hlist_for_each_entry(core, &clk_rpm_list, rpm_node) {
+		if (core == failed)
+			break;
+
+		clk_pm_runtime_put(core);
+	}
+	mutex_unlock(&clk_rpm_list_lock);
+
+	return ret;
+}
+
+/**
+ * clk_pm_runtime_put_all() - Runtime "put" all clk provider devices
+ *
+ * Put the runtime PM references taken in clk_pm_runtime_get_all() and release
+ * the 'clk_rpm_list_lock'.
+ */
+static void clk_pm_runtime_put_all(void)
+{
+	struct clk_core *core;
+
+	hlist_for_each_entry(core, &clk_rpm_list, rpm_node)
+		clk_pm_runtime_put(core);
+	mutex_unlock(&clk_rpm_list_lock);
+}
+
+static void clk_pm_runtime_init(struct clk_core *core)
+{
+	struct device *dev = core->dev;
+
+	if (dev && pm_runtime_enabled(dev)) {
+		core->rpm_enabled = true;
+
+		mutex_lock(&clk_rpm_list_lock);
+		hlist_add_head(&core->rpm_node, &clk_rpm_list);
+		mutex_unlock(&clk_rpm_list_lock);
+	}
+}
+
 /***           locking             ***/
 static void clk_prepare_lock(void)
 {
@@ -1252,9 +1340,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core)
 	if (core->flags & CLK_IGNORE_UNUSED)
 		return;
 
-	if (clk_pm_runtime_get(core))
-		return;
-
 	if (clk_core_is_prepared(core)) {
 		trace_clk_unprepare(core);
 		if (core->ops->unprepare_unused)
@@ -1263,8 +1348,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core)
 			core->ops->unprepare(core->hw);
 		trace_clk_unprepare_complete(core);
 	}
-
-	clk_pm_runtime_put(core);
 }
 
 static void __init clk_disable_unused_subtree(struct clk_core *core)
@@ -1280,9 +1363,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
 	if (core->flags & CLK_OPS_PARENT_ENABLE)
 		clk_core_prepare_enable(core->parent);
 
-	if (clk_pm_runtime_get(core))
-		goto unprepare_out;
-
 	flags = clk_enable_lock();
 
 	if (core->enable_count)
@@ -1307,8 +1387,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
 
 unlock_out:
 	clk_enable_unlock(flags);
-	clk_pm_runtime_put(core);
-unprepare_out:
 	if (core->flags & CLK_OPS_PARENT_ENABLE)
 		clk_core_disable_unprepare(core->parent);
 }
@@ -1324,6 +1402,7 @@ __setup("clk_ignore_unused", clk_ignore_unused_setup);
 static int __init clk_disable_unused(void)
 {
 	struct clk_core *core;
+	int ret;
 
 	if (clk_ignore_unused) {
 		pr_warn("clk: Not disabling unused clocks\n");
@@ -1332,6 +1411,13 @@ static int __init clk_disable_unused(void)
 
 	pr_info("clk: Disabling unused clocks\n");
 
+	ret = clk_pm_runtime_get_all();
+	if (ret)
+		return ret;
+	/*
+	 * Grab the prepare lock to keep the clk topology stable while iterating
+	 * over clks.
+	 */
 	clk_prepare_lock();
 
 	hlist_for_each_entry(core, &clk_root_list, child_node)
@@ -1348,6 +1434,8 @@ static int __init clk_disable_unused(void)
 
 	clk_prepare_unlock();
 
+	clk_pm_runtime_put_all();
+
 	return 0;
 }
 late_initcall_sync(clk_disable_unused);
@@ -3887,6 +3975,12 @@ static void __clk_release(struct kref *ref)
 {
 	struct clk_core *core = container_of(ref, struct clk_core, ref);
 
+	if (core->rpm_enabled) {
+		mutex_lock(&clk_rpm_list_lock);
+		hlist_del(&core->rpm_node);
+		mutex_unlock(&clk_rpm_list_lock);
+	}
+
 	clk_core_free_parent_map(core);
 	kfree_const(core->name);
 	kfree(core);
@@ -3926,9 +4020,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw)
 	}
 	core->ops = init->ops;
 
-	if (dev && pm_runtime_enabled(dev))
-		core->rpm_enabled = true;
 	core->dev = dev;
+	clk_pm_runtime_init(core);
 	core->of_node = np;
 	if (dev && dev->driver)
 		core->owner = dev->driver->owner;
Signature · 1 line
2.43.0
author maintainer
#40 lore raw

PATCH 40/71 x86/bugs: Fix BHI retpoline check

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf <[email protected]>

[ Upstream commit 69129794d94c544810e68b2b4eaa7e44063f9bf2 ]

Confusingly, X86_FEATURE_RETPOLINE doesn't mean retpolines are enabled, as it also includes the original "AMD retpoline" which isn't a retpoline at all.

Also replace cpu_feature_enabled() with boot_cpu_has() because this is before alternatives are patched and cpu_feature_enabled()'s fallback path is slower than plain old boot_cpu_has().

---
 arch/x86/kernel/cpu/bugs.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
arch/x86/kernel/cpu/bugs.c +7 -4
index b30b32b288dd4..247545b57dff6 100644
@@ -1629,7 +1629,8 @@ static void __init bhi_select_mitigation(void)
 		return;
 
 	/* Retpoline mitigates against BHI unless the CPU has RRSBA behavior */
-	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE)) {
+	if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
+	    !boot_cpu_has(X86_FEATURE_RETPOLINE_LFENCE)) {
 		spec_ctrl_disable_kernel_rrsba();
 		if (rrsba_disabled)
 			return;
@@ -2783,11 +2784,13 @@ static const char *spectre_bhi_state(void)
 {
 	if (!boot_cpu_has_bug(X86_BUG_BHI))
 		return "; BHI: Not affected";
-	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_HW))
+	else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_HW))
 		return "; BHI: BHI_DIS_S";
-	else if  (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
+	else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP))
 		return "; BHI: SW loop, KVM: SW loop";
-	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) && rrsba_disabled)
+	else if (boot_cpu_has(X86_FEATURE_RETPOLINE) &&
+		 !boot_cpu_has(X86_FEATURE_RETPOLINE_LFENCE) &&
+		 rrsba_disabled)
 		return "; BHI: Retpoline";
 	else if (boot_cpu_has(X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT))
 		return "; BHI: Vulnerable, KVM: SW loop";
Signature · 1 line
2.43.0
author maintainer
#41 lore raw

PATCH 41/71 x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

[ Upstream commit 9543f6e26634537997b6e909c20911b7bf4876de ]

Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and VPCLMULQDQ. These features don't depend on AVX512, and there exist CPUs that support these features but not AVX512. GFNI actually doesn't even depend on AVX.

This prevents GFNI from being unnecessarily disabled if AVX is disabled to mitigate the GDS vulnerability.

This also prevents all three features from being unnecessarily disabled if AVX512VL (or its dependency AVX512F) were to be disabled, but it looks like there isn't any case where this happens anyway.

Fixes c128dbfa0f87 ("x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features")
---
 arch/x86/kernel/cpu/cpuid-deps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/kernel/cpu/cpuid-deps.c +3 -3
index defda61f372df..2161676577f2b 100644
@@ -44,7 +44,10 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_F16C,			X86_FEATURE_XMM2,     },
 	{ X86_FEATURE_AES,			X86_FEATURE_XMM2      },
 	{ X86_FEATURE_SHA_NI,			X86_FEATURE_XMM2      },
+	{ X86_FEATURE_GFNI,			X86_FEATURE_XMM2      },
 	{ X86_FEATURE_FMA,			X86_FEATURE_AVX       },
+	{ X86_FEATURE_VAES,			X86_FEATURE_AVX       },
+	{ X86_FEATURE_VPCLMULQDQ,		X86_FEATURE_AVX       },
 	{ X86_FEATURE_AVX2,			X86_FEATURE_AVX,      },
 	{ X86_FEATURE_AVX512F,			X86_FEATURE_AVX,      },
 	{ X86_FEATURE_AVX512IFMA,		X86_FEATURE_AVX512F   },
@@ -56,9 +59,6 @@ static const struct cpuid_dep cpuid_deps[] = {
 	{ X86_FEATURE_AVX512VL,			X86_FEATURE_AVX512F   },
 	{ X86_FEATURE_AVX512VBMI,		X86_FEATURE_AVX512F   },
 	{ X86_FEATURE_AVX512_VBMI2,		X86_FEATURE_AVX512VL  },
-	{ X86_FEATURE_GFNI,			X86_FEATURE_AVX512VL  },
-	{ X86_FEATURE_VAES,			X86_FEATURE_AVX512VL  },
-	{ X86_FEATURE_VPCLMULQDQ,		X86_FEATURE_AVX512VL  },
 	{ X86_FEATURE_AVX512_VNNI,		X86_FEATURE_AVX512VL  },
 	{ X86_FEATURE_AVX512_BITALG,		X86_FEATURE_AVX512VL  },
 	{ X86_FEATURE_AVX512_4VNNIW,		X86_FEATURE_AVX512F   },
Signature · 1 line
2.43.0
author maintainer
#42 lore raw

PATCH 42/71 thunderbolt: Avoid notify PM core about runtime PM resume

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gil Fine <[email protected]>

commit dcd12acaf384c30437fa5a9a1f71df06fc9835fd upstream.

Currently we notify PM core about occurred wakes after any resume. This is not actually needed after resume from runtime suspend. Hence, notify PM core about occurred wakes only after resume from system sleep. Also, if the wake occurred in USB4 router upstream port, we don't notify the PM core about it since it is not actually needed and can cause unexpected autowake (e.g. if /sys/power/wakeup_count is used).

While there add the missing kernel-doc for tb_switch_resume().

---
 drivers/thunderbolt/switch.c |   27 +++++++++++++++++++++++++--
 drivers/thunderbolt/tb.c     |    4 ++--
 drivers/thunderbolt/tb.h     |    3 ++-
 drivers/thunderbolt/usb4.c   |   13 +++++++------
 4 files changed, 36 insertions(+), 11 deletions(-)
drivers/thunderbolt/switch.c +25 -2
@@ -2926,7 +2926,26 @@ static int tb_switch_set_wake(struct tb_
 	return tb_lc_set_wake(sw, flags);
 }
 
-int tb_switch_resume(struct tb_switch *sw)
+static void tb_switch_check_wakes(struct tb_switch *sw)
+{
+	if (device_may_wakeup(&sw->dev)) {
+		if (tb_switch_is_usb4(sw))
+			usb4_switch_check_wakes(sw);
+	}
+}
+
+/**
+ * tb_switch_resume() - Resume a switch after sleep
+ * @sw: Switch to resume
+ * @runtime: Is this resume from runtime suspend or system sleep
+ *
+ * Resumes and re-enumerates router (and all its children), if still plugged
+ * after suspend. Don't enumerate device router whose UID was changed during
+ * suspend. If this is resume from system sleep, notifies PM core about the
+ * wakes occurred during suspend. Disables all wakes, except USB4 wake of
+ * upstream port for USB4 routers that shall be always enabled.
+ */
+int tb_switch_resume(struct tb_switch *sw, bool runtime)
 {
 	struct tb_port *port;
 	int err;
@@ -2971,6 +2990,9 @@ int tb_switch_resume(struct tb_switch *s
 	if (err)
 		return err;
 
+	if (!runtime)
+		tb_switch_check_wakes(sw);
+
 	/* Disable wakes */
 	tb_switch_set_wake(sw, 0);
 
@@ -3000,7 +3022,8 @@ int tb_switch_resume(struct tb_switch *s
 			 */
 			if (tb_port_unlock(port))
 				tb_port_warn(port, "failed to unlock port\n");
-			if (port->remote && tb_switch_resume(port->remote->sw)) {
+			if (port->remote &&
+			    tb_switch_resume(port->remote->sw, runtime)) {
 				tb_port_warn(port,
 					     "lost during suspend, disconnecting\n");
 				tb_sw_set_unplugged(port->remote->sw);
drivers/thunderbolt/tb.c +2 -2
@@ -1491,7 +1491,7 @@ static int tb_resume_noirq(struct tb *tb
 	/* remove any pci devices the firmware might have setup */
 	tb_switch_reset(tb->root_switch);
 
-	tb_switch_resume(tb->root_switch);
+	tb_switch_resume(tb->root_switch, false);
 	tb_free_invalid_tunnels(tb);
 	tb_free_unplugged_children(tb->root_switch);
 	tb_restore_children(tb->root_switch);
@@ -1617,7 +1617,7 @@ static int tb_runtime_resume(struct tb *
 	struct tb_tunnel *tunnel, *n;
 
 	mutex_lock(&tb->lock);
-	tb_switch_resume(tb->root_switch);
+	tb_switch_resume(tb->root_switch, true);
 	tb_free_invalid_tunnels(tb);
 	tb_restore_children(tb->root_switch);
 	list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list)
drivers/thunderbolt/tb.h +2 -1
@@ -740,7 +740,7 @@ int tb_switch_configure(struct tb_switch
 int tb_switch_add(struct tb_switch *sw);
 void tb_switch_remove(struct tb_switch *sw);
 void tb_switch_suspend(struct tb_switch *sw, bool runtime);
-int tb_switch_resume(struct tb_switch *sw);
+int tb_switch_resume(struct tb_switch *sw, bool runtime);
 int tb_switch_reset(struct tb_switch *sw);
 void tb_sw_set_unplugged(struct tb_switch *sw);
 struct tb_port *tb_switch_find_port(struct tb_switch *sw,
@@ -1043,6 +1043,7 @@ static inline struct tb_retimer *tb_to_r
 	return NULL;
 }
 
+void usb4_switch_check_wakes(struct tb_switch *sw);
 int usb4_switch_setup(struct tb_switch *sw);
 int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid);
 int usb4_switch_drom_read(struct tb_switch *sw, unsigned int address, void *buf,
drivers/thunderbolt/usb4.c +7 -6
@@ -175,15 +175,18 @@ static inline int usb4_switch_op_data(st
 				tx_dwords, rx_data, rx_dwords);
 }
 
-static void usb4_switch_check_wakes(struct tb_switch *sw)
+/**
+ * usb4_switch_check_wakes() - Check for wakes and notify PM core about them
+ * @sw: Router whose wakes to check
+ *
+ * Checks wakes occurred during suspend and notify the PM core about them.
+ */
+void usb4_switch_check_wakes(struct tb_switch *sw)
 {
 	struct tb_port *port;
 	bool wakeup = false;
 	u32 val;
 
-	if (!device_may_wakeup(&sw->dev))
-		return;
-
 	if (tb_route(sw)) {
 		if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1))
 			return;
@@ -248,8 +251,6 @@ int usb4_switch_setup(struct tb_switch *
 	u32 val = 0;
 	int ret;
 
-	usb4_switch_check_wakes(sw);
-
 	if (!tb_route(sw))
 		return 0;
 
author maintainer
#43 lore raw

PATCH 43/71 thunderbolt: Fix wake configurations after device unplug

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gil Fine <[email protected]>

commit c38fa07dc69f0b9e6f43ecab96dc7861a70c827c upstream.

Currently we don't configure correctly the wake events after unplug of device router. What can happen is that the downstream ports of host router will be configured to wake on: USB4-wake and wake-on-disconnect, but not on wake-on-connect. This may cause the later plugged device not to wake the domain and fail in enumeration. Fix this by clearing downstream port's "USB4 Port is Configured" bit, after unplug of a device router.

---
 drivers/thunderbolt/switch.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/thunderbolt/switch.c +14 -7
@@ -2669,22 +2669,29 @@ void tb_switch_unconfigure_link(struct t
 {
 	struct tb_port *up, *down;
 
-	if (sw->is_unplugged)
-		return;
 	if (!tb_route(sw) || tb_switch_is_icm(sw))
 		return;
 
+	/*
+	 * Unconfigure downstream port so that wake-on-connect can be
+	 * configured after router unplug. No need to unconfigure upstream port
+	 * since its router is unplugged.
+	 */
 	up = tb_upstream_port(sw);
-	if (tb_switch_is_usb4(up->sw))
-		usb4_port_unconfigure(up);
-	else
-		tb_lc_unconfigure_port(up);
-
 	down = up->remote;
 	if (tb_switch_is_usb4(down->sw))
 		usb4_port_unconfigure(down);
 	else
 		tb_lc_unconfigure_port(down);
+
+	if (sw->is_unplugged)
+		return;
+
+	up = tb_upstream_port(sw);
+	if (tb_switch_is_usb4(up->sw))
+		usb4_port_unconfigure(up);
+	else
+		tb_lc_unconfigure_port(up);
 }
 
 static void tb_switch_credits_init(struct tb_switch *sw)
author maintainer
#44 lore raw

PATCH 44/71 comedi: vmk80xx: fix incomplete endpoint checking

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nikita Zhandarovich <[email protected]>

commit d1718530e3f640b7d5f0050e725216eab57a85d8 upstream.

While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them.

Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present.

This patch has not been tested on real hardware.

[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 1 != type 3

WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503
...
Call Trace:
 <TASK>
 usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59
 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline]
 vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818
 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067
 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399

...

Similar issue also found by Syzkaller:

Reported-and-tested-by [email protected]
Cc stable <[email protected]>
Fixes 49253d542cc0 ("staging: comedi: vmk80xx: factor out usb endpoint detection")
---
 drivers/comedi/drivers/vmk80xx.c |   35 ++++++++++++-----------------------
 1 file changed, 12 insertions(+), 23 deletions(-)
drivers/comedi/drivers/vmk80xx.c +12 -23
@@ -642,33 +642,22 @@ static int vmk80xx_find_usb_endpoints(st
 	struct vmk80xx_private *devpriv = dev->private;
 	struct usb_interface *intf = comedi_to_usb_interface(dev);
 	struct usb_host_interface *iface_desc = intf->cur_altsetting;
-	struct usb_endpoint_descriptor *ep_desc;
-	int i;
+	struct usb_endpoint_descriptor *ep_rx_desc, *ep_tx_desc;
+	int ret;
 
-	if (iface_desc->desc.bNumEndpoints != 2)
-		return -ENODEV;
-
-	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
-		ep_desc = &iface_desc->endpoint[i].desc;
-
-		if (usb_endpoint_is_int_in(ep_desc) ||
-		    usb_endpoint_is_bulk_in(ep_desc)) {
-			if (!devpriv->ep_rx)
-				devpriv->ep_rx = ep_desc;
-			continue;
-		}
+	if (devpriv->model == VMK8061_MODEL)
+		ret = usb_find_common_endpoints(iface_desc, &ep_rx_desc,
+						&ep_tx_desc, NULL, NULL);
+	else
+		ret = usb_find_common_endpoints(iface_desc, NULL, NULL,
+						&ep_rx_desc, &ep_tx_desc);
 
-		if (usb_endpoint_is_int_out(ep_desc) ||
-		    usb_endpoint_is_bulk_out(ep_desc)) {
-			if (!devpriv->ep_tx)
-				devpriv->ep_tx = ep_desc;
-			continue;
-		}
-	}
-
-	if (!devpriv->ep_rx || !devpriv->ep_tx)
+	if (ret)
 		return -ENODEV;
 
+	devpriv->ep_rx = ep_rx_desc;
+	devpriv->ep_tx = ep_tx_desc;
+
 	if (!usb_endpoint_maxp(devpriv->ep_rx) || !usb_endpoint_maxp(devpriv->ep_tx))
 		return -EINVAL;
 
author maintainer
#45 lore raw

PATCH 45/71 serial/pmac_zilog: Remove flawed mitigation for rx irq flood

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Finn Thain <[email protected]>

commit 1be3226445362bfbf461c92a5bcdb1723f2e4907 upstream.

The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console:

ttyPZ0: pmz: rx irq flood !

BUG: spinlock recursion on CPU#0, swapper/0

That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port.

Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below.

A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it.

---
 drivers/tty/serial/pmac_zilog.c |   14 --------------
 1 file changed, 14 deletions(-)
drivers/tty/serial/pmac_zilog.c +0 -14
@@ -217,7 +217,6 @@ static bool pmz_receive_chars(struct uar
 {
 	struct tty_port *port;
 	unsigned char ch, r1, drop, flag;
-	int loops = 0;
 
 	/* Sanity check, make sure the old bug is no longer happening */
 	if (uap->port.state == NULL) {
@@ -298,25 +297,12 @@ static bool pmz_receive_chars(struct uar
 		if (r1 & Rx_OVR)
 			tty_insert_flip_char(port, 0, TTY_OVERRUN);
 	next_char:
-		/* We can get stuck in an infinite loop getting char 0 when the
-		 * line is in a wrong HW state, we break that here.
-		 * When that happens, I disable the receive side of the driver.
-		 * Note that what I've been experiencing is a real irq loop where
-		 * I'm getting flooded regardless of the actual port speed.
-		 * Something strange is going on with the HW
-		 */
-		if ((++loops) > 1000)
-			goto flood;
 		ch = read_zsreg(uap, R0);
 		if (!(ch & Rx_CH_AV))
 			break;
 	}
 
 	return true;
- flood:
-	pmz_interrupt_control(uap, 0);
-	pmz_error("pmz: rx irq flood !\n");
-	return true;
 }
 
 static void pmz_status_handle(struct uart_pmac_port *uap)
author maintainer
#46 lore raw

PATCH 46/71 USB: serial: option: add Fibocom FM135-GL variants

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: bolan wang <[email protected]>

commit 356952b13af5b2c338df1e06889fd1b5e12cbbf4 upstream.

Update the USB serial option driver support for the Fibocom FM135-GL LTE modules.
- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS)

0x0115: mbim, diag, at, pipe

Here are the outputs of usb-devices:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0115 Rev=05.15
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=Fibocom Module
S:  SerialNumber=12345678
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -2272,6 +2272,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) },	/* Fibocom FG150 Diag */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) },		/* Fibocom FG150 AT */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) },			/* Fibocom FM160 (MBIM mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff),			/* Fibocom FM135 (laptop MBIM) */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
author maintainer
#47 lore raw

PATCH 47/71 USB: serial: option: add support for Fibocom FM650/FG650

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chuanhong Guo <[email protected]>

commit fb1f4584b1215e8c209f6b3a4028ed8351a0e961 upstream.

Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes.

In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs.

usb-devices output for all modes:

ECM:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a04 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

NCM:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a05 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

RNDIS:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a06 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

MBIM:

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a07 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/serial/option.c +4 -0
@@ -2279,6 +2279,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) },			/* Fibocom FM101-GL (laptop MBIM) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff),			/* Fibocom FM101-GL (laptop MBIM) */
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) },			/* Fibocom FM650-CN (ECM mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) },			/* Fibocom FM650-CN (NCM mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) },			/* Fibocom FM650-CN (RNDIS mode) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) },			/* Fibocom FM650-CN (MBIM mode) */
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
author maintainer
#48 lore raw

PATCH 48/71 USB: serial: option: add Lonsung U8300/U9300 product

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Coia Prant <[email protected]>

commit cf16ffa17c398434a77b8a373e69287c95b60de2 upstream.

Update the USB serial option driver to support Longsung U8300/U9300.

For U8300

Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem.
Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem.

Interface mapping is:
0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB

T:  Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b05 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

For U9300

Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem.
Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem.

Interface mapping is:
0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI

Note: Interface 3 of some models of the U9300 series can send AT commands.

T:  Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1c9e ProdID=9b3c Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms

Tested successfully using Modem Manager on U9300.
Tested successfully AT commands using If=1, If=2 and If=3 on U9300.

[ johan: drop product defines, trim commit message ]
---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/serial/option.c +4 -0
@@ -2052,6 +2052,10 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff),
 	  .driver_info = RSVD(4) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b05),	/* Longsung U8300 */
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b3c),	/* Longsung U9300 */
+	  .driver_info = RSVD(0) | RSVD(4) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
author maintainer
#49 lore raw

PATCH 49/71 USB: serial: option: support Quectel EM060K sub-models

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jerry Meng <[email protected]>

commit c840244aba7ad2b83ed904378b36bd6aef25511c upstream.

EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, having the same name "Quectel EM060K-GL" and the same interface layout.

MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0129 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=Quectel EM060K-GL
S:  SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/usb/serial/option.c +16 -0
@@ -255,6 +255,10 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EM061K_LMS		0x0124
 #define QUECTEL_PRODUCT_EC25			0x0125
 #define QUECTEL_PRODUCT_EM060K_128		0x0128
+#define QUECTEL_PRODUCT_EM060K_129		0x0129
+#define QUECTEL_PRODUCT_EM060K_12a		0x012a
+#define QUECTEL_PRODUCT_EM060K_12b		0x012b
+#define QUECTEL_PRODUCT_EM060K_12c		0x012c
 #define QUECTEL_PRODUCT_EG91			0x0191
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
@@ -1218,6 +1222,18 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0x00, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) },
author maintainer
#50 lore raw

PATCH 50/71 USB: serial: option: add Rolling RW101-GL and RW135-GL support

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vanillan Wang <[email protected]>

commit 311f97a4c7c22a01f8897bddf00428dfd0668e79 upstream.

Update the USB serial option driver support for the Rolling LTE modules.

- VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS)
0x01a2: mbim, diag, at, pipe
- VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS)
0x01a3: mbim, pipe
- VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS)
0x01a4: mbim, diag, at, pipe
- VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS)
0x0104: RMNET, diag, at, pipe
- VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS)
0x0115: MBIM, diag, at, pipe

Here are the outputs of usb-devices:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=01a2 Rev=05.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=12345678
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=01a3 Rev=05.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=12345678
C:  #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=01a4 Rev=05.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=12345678
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=33f8 ProdID=0104 Rev=05.04
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=ba2eb033
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=33f8 ProdID=0115 Rev=05.15
S:  Manufacturer=Rolling Wireless S.a.r.l.
S:  Product=Rolling Module
S:  SerialNumber=12345678
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/usb/serial/option.c +8 -0
@@ -2307,6 +2307,14 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
+	{ USB_DEVICE(0x33f8, 0x0104),						/* Rolling RW101-GL (laptop RMNET) */
+	  .driver_info = RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) },			/* Rolling RW101-GL (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff),			/* Rolling RW101-GL (laptop MBIM) */
+	  .driver_info = RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff),			/* Rolling RW135-GL (laptop MBIM) */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) },
author maintainer
#51 lore raw

PATCH 51/71 USB: serial: option: add Telit FN920C04 rmnet compositions

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <[email protected]>

commit 582ee2f9d268d302595db3e36b985e5cbb93284d upstream.

Add the following Telit FN920C04 compositions:

0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)

T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag)

T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb

T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a9 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/serial/option.c +6 -0
@@ -1376,6 +1376,12 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(2) | RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff),	/* Telit FE990 (ECM) */
 	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff),	/* Telit FN20C04 (rmnet) */
+	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff),	/* Telit FN20C04 (rmnet) */
+	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff),	/* Telit FN20C04 (rmnet) */
+	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
author maintainer
#52 lore raw

PATCH 52/71 Revert "usb: cdc-wdm: close race between read and workqueue"

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

commit 1607830dadeefc407e4956336d9fcd9e9defd810 upstream.

This reverts commit 339f83612f3a569b194680768b22bf113c26a29d.

It has been found to cause problems in a number of Chromebook devices, so revert the change until it can be brought back in a safe way.

Fixes 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue")
Cc stable <[email protected]>
Cc Oliver Neukum <[email protected]>
Cc Bjørn Mork <[email protected]>
---
 drivers/usb/class/cdc-wdm.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
drivers/usb/class/cdc-wdm.c +1 -5
@@ -485,7 +485,6 @@ out_free_mem:
 static int service_outstanding_interrupt(struct wdm_device *desc)
 {
 	int rv = 0;
-	int used;
 
 	/* submit read urb only if the device is waiting for it */
 	if (!desc->resp_count || !--desc->resp_count)
@@ -500,10 +499,7 @@ static int service_outstanding_interrupt
 		goto out;
 	}
 
-	used = test_and_set_bit(WDM_RESPONDING, &desc->flags);
-	if (used)
-		goto out;
-
+	set_bit(WDM_RESPONDING, &desc->flags);
 	spin_unlock_irq(&desc->iuspin);
 	rv = usb_submit_urb(desc->response, GFP_KERNEL);
 	spin_lock_irq(&desc->iuspin);
author maintainer
#53 lore raw

PATCH 53/71 usb: dwc2: host: Fix dereference issue in DDMA completion flow.

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Minas Harutyunyan <[email protected]>

commit eed04fa96c48790c1cce73c8a248e9d460b088f8 upstream.

Fixed variable dereference issue in DDMA completion flow.

---
 drivers/usb/dwc2/hcd_ddma.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/dwc2/hcd_ddma.c +3 -1
@@ -897,13 +897,15 @@ static int dwc2_cmpl_host_isoc_dma_desc(
 	struct dwc2_dma_desc *dma_desc;
 	struct dwc2_hcd_iso_packet_desc *frame_desc;
 	u16 frame_desc_idx;
-	struct urb *usb_urb = qtd->urb->priv;
+	struct urb *usb_urb;
 	u16 remain = 0;
 	int rc = 0;
 
 	if (!qtd->urb)
 		return -EINVAL;
 
+	usb_urb = qtd->urb->priv;
+
 	dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx *
 				sizeof(struct dwc2_dma_desc)),
 				sizeof(struct dwc2_dma_desc),
author maintainer
#54 lore raw

PATCH 54/71 usb: Disable USB3 LPM at shutdown

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <[email protected]>

commit d920a2ed8620be04a3301e1a9c2b7cc1de65f19d upstream.

SanDisks USB3 storage may disapper after system reboot:

usb usb2-port3: link state change
xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 usb usb2-port3: do warm reset, port only
xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 usb usb2-port3: not warm reset yet, waiting 50ms
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0 usb usb2-port3: not warm reset yet, waiting 200ms
...
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0 usb usb2-port3: not warm reset yet, waiting 200ms
xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0 usb usb2-port3: not enabled, trying warm reset again...

This is due to the USB device still cause port change event after xHCI is shuted down:

xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001 xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling. xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0
xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling. xhci_hcd 0000:38:00.0: // Halt the HC
xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling. xhci_hcd 0000:00:14.0: // Halt the HC
xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203 xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 usb 2-3: device not accepting address 2, error -108
xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1 usb usb2-port3: not reset yet, waiting 60ms
ACPI: PM: Preparing to enter system sleep state S5
xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1 usb usb2-port3: not reset yet, waiting 200ms
reboot: Restarting system

The port change event is caused by LPM transition, so disabling LPM at shutdown to make sure the device is in U0 for warmboot.

---
 drivers/usb/core/port.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/core/port.c +3 -1
@@ -295,8 +295,10 @@ static void usb_port_shutdown(struct dev
 {
 	struct usb_port *port_dev = to_usb_port(dev);
 
-	if (port_dev->child)
+	if (port_dev->child) {
 		usb_disable_usb2_hardware_lpm(port_dev->child);
+		usb_unlocked_disable_lpm(port_dev->child);
+	}
 }
 
 static const struct dev_pm_ops usb_port_pm_ops = {
author maintainer
#55 lore raw

PATCH 55/71 usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Norihiko Hama <[email protected]>

commit 6334b8e4553cc69f51e383c9de545082213d785e upstream.

When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled.

After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled.

As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL.

And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object.

Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory.

[function unlink via configfs]
usb0: eth_stop dev->port_usb=ffffff9b179c3200
--> error happens in usb_ep_enable().
NCM: ncm_disable: ncm=ffffff9b179c3200
--> no gether_disconnect() since ncm->port.in_ep->enabled is false.
NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200
NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm

[function link via configfs]
NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000
NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000
NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0
usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm
usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit()
--> dev->wrap()

  Unable to handle kernel paging request at virtual address dead00000000014f

This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established.

---
 drivers/usb/gadget/function/f_ncm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/f_ncm.c +2 -2
@@ -888,7 +888,7 @@ static int ncm_set_alt(struct usb_functi
 		if (alt > 1)
 			goto fail;
 
-		if (ncm->port.in_ep->enabled) {
+		if (ncm->netdev) {
 			DBG(cdev, "reset ncm\n");
 			ncm->netdev = NULL;
 			gether_disconnect(&ncm->port);
@@ -1373,7 +1373,7 @@ static void ncm_disable(struct usb_funct
 
 	DBG(cdev, "ncm deactivated\n");
 
-	if (ncm->port.in_ep->enabled) {
+	if (ncm->netdev) {
 		ncm->netdev = NULL;
 		gether_disconnect(&ncm->port);
 	}
author maintainer
#56 lore raw

PATCH 56/71 mei: me: disable RPL-S on SPS and IGN firmwares

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Usyskin <[email protected]>

commit 0dc04112bee6fdd6eb847ccb32214703022c0269 upstream.

Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) and SPS firmwares for RPL-S devices. These firmwares do not support the MEI protocol.

---
 drivers/misc/mei/pci-me.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/misc/mei/pci-me.c +1 -1
@@ -115,7 +115,7 @@ static const struct pci_device_id mei_me
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)},
 
-	{MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_SPS_CFG)},
 
 	{MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)},
author maintainer
#57 lore raw

PATCH 57/71 speakup: Avoid crash on very long word

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Samuel Thibault <[email protected]>

commit c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 upstream.

In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer.

Fixes c6e3fd22cd538 ("Staging: add speakup to the staging directory")
---
 drivers/accessibility/speakup/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/accessibility/speakup/main.c +1 -1
@@ -573,7 +573,7 @@ static u_long get_word(struct vc_data *v
 	}
 	attr_ch = get_char(vc, (u_short *)tmp_pos, &spk_attr);
 	buf[cnt++] = attr_ch;
-	while (tmpx < vc->vc_cols - 1) {
+	while (tmpx < vc->vc_cols - 1 && cnt < sizeof(buf) - 1) {
 		tmp_pos += 2;
 		tmpx++;
 		ch = get_char(vc, (u_short *)tmp_pos, &temp);
author maintainer
#58 lore raw

PATCH 58/71 fs: sysfs: Fix reference leak in sysfs_break_active_protection()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alan Stern <[email protected]>

commit a90bca2228c0646fc29a72689d308e5fe03e6d78 upstream.

The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released.

Fix the leak by adding an explicit kobject_put() call when kn is NULL.

Fixes 2afc9166f79b ("scsi: sysfs: Introduce sysfs_{un,}break_active_protection()")
Cc Bart Van Assche <[email protected]>
---
 fs/sysfs/file.c |    2 ++
 1 file changed, 2 insertions(+)
fs/sysfs/file.c +2 -0
@@ -440,6 +440,8 @@ struct kernfs_node *sysfs_break_active_p
 	kn = kernfs_find_and_get(kobj->sd, attr->name);
 	if (kn)
 		kernfs_break_active_protection(kn);
+	else
+		kobject_put(kobj);
 	return kn;
 }
 EXPORT_SYMBOL_GPL(sysfs_break_active_protection);
author maintainer
#59 lore raw

PATCH 59/71 KVM: x86: Snapshot if a vCPUs vendor model is AMD vs. Intel compatible

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <[email protected]>

commit fd706c9b1674e2858766bfbf7430534c2b26fbef upstream.

Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel vs. AMD behavior related to masking the LVTPC entry, KVM will need to check for vendor compatibility on every PMI injection, i.e. querying for AMD will soon be a moderately hot path.

Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's default behavior, both if userspace omits (or never sets) CPUID 0x0 and if userspace sets a completely unknown vendor. One could argue that KVM should treat such vCPUs as not being compatible with Intel *or* AMD, but that would add useless complexity to KVM.

KVM needs to do *something* in the face of vendor specific behavior, and so unless KVM conjured up a magic third option, choosing to treat unknown vendors as neither Intel nor AMD means that checks on AMD compatibility would yield Intel behavior, and checks for Intel compatibility would yield AMD behavior. And that's far worse as it would effectively yield random behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs. !Intel. And practically speaking, all x86 CPUs follow either Intel or AMD architecture, i.e. "supporting" an unknown third architecture adds no value.

Deliberately don't convert any of the existing guest_cpuid_is_intel() checks, as the Intel side of things is messier due to some flows explicitly checking for exactly vendor==Intel, versus some flows assuming anything that isn't "AMD compatible" gets Intel behavior. The Intel code will be cleaned up in the future.

Message-ID: <[email protected]>

---
 arch/x86/include/asm/kvm_host.h |    1 +
 arch/x86/kvm/cpuid.c            |    1 +
 arch/x86/kvm/cpuid.h            |   10 ++++++++++
 arch/x86/kvm/mmu/mmu.c          |    2 +-
 arch/x86/kvm/x86.c              |    2 +-
 5 files changed, 14 insertions(+), 2 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -732,6 +732,7 @@ struct kvm_vcpu_arch {
 
 	int cpuid_nent;
 	struct kvm_cpuid_entry2 *cpuid_entries;
+	bool is_amd_compatible;
 
 	u64 reserved_gpa_bits;
 	int maxphyaddr;
arch/x86/kvm/cpuid.c +1 -0
@@ -189,6 +189,7 @@ static void kvm_vcpu_after_set_cpuid(str
 
 	kvm_update_pv_runtime(vcpu);
 
+	vcpu->arch.is_amd_compatible = guest_cpuid_is_amd_or_hygon(vcpu);
 	vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
 	vcpu->arch.reserved_gpa_bits = kvm_vcpu_reserved_gpa_bits_raw(vcpu);
 
arch/x86/kvm/cpuid.h +10 -0
@@ -121,6 +121,16 @@ static inline bool guest_cpuid_is_intel(
 	return best && is_guest_vendor_intel(best->ebx, best->ecx, best->edx);
 }
 
+static inline bool guest_cpuid_is_amd_compatible(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.is_amd_compatible;
+}
+
+static inline bool guest_cpuid_is_intel_compatible(struct kvm_vcpu *vcpu)
+{
+	return !guest_cpuid_is_amd_compatible(vcpu);
+}
+
 static inline int guest_cpuid_family(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
arch/x86/kvm/mmu/mmu.c +1 -1
@@ -4351,7 +4351,7 @@ static void reset_rsvds_bits_mask(struct
 				context->root_level, is_efer_nx(context),
 				guest_can_use_gbpages(vcpu),
 				is_cr4_pse(context),
-				guest_cpuid_is_amd_or_hygon(vcpu));
+				guest_cpuid_is_amd_compatible(vcpu));
 }
 
 static void
arch/x86/kvm/x86.c +1 -1
@@ -3107,7 +3107,7 @@ static void kvmclock_sync_fn(struct work
 static bool can_set_mci_status(struct kvm_vcpu *vcpu)
 {
 	/* McStatusWrEn enabled? */
-	if (guest_cpuid_is_amd_or_hygon(vcpu))
+	if (guest_cpuid_is_amd_compatible(vcpu))
 		return !!(vcpu->arch.msr_hwcr & BIT_ULL(18));
 
 	return false;
author maintainer
#60 lore raw

PATCH 60/71 KVM: x86/pmu: Do not mask LVTPC when handling a PMI on AMD platforms

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sandipan Das <[email protected]>

commit 49ff3b4aec51e3abfc9369997cc603319b02af9a upstream.

On AMD and Hygon platforms, the local APIC does not automatically set the mask bit of the LVTPC register when handling a PMI and there is no need to clear it in the kernel's PMI handler.

For guests, the mask bit is currently set by kvm_apic_local_deliver() and unless it is cleared by the guest kernel's PMI handler, PMIs stop arriving and break use-cases like sampling with perf record.

This does not affect non-PerfMonV2 guests because PMIs are handled in the guest kernel by x86_pmu_handle_irq() which always clears the LVTPC mask bit irrespective of the vendor.

Before:

  $ perf record -e cycles:u true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data (1 samples) ]

After:

  $ perf record -e cycles:u true
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.002 MB perf.data (19 samples) ]
Fixes a16eb25b09c0 ("KVM: x86: Mask LVTPC when handling a PMI")
[sean: use is_intel_compatible instead of !is_amd_or_hygon()]

Message-ID: <[email protected]>

---
 arch/x86/kvm/lapic.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/x86/kvm/lapic.c +2 -1
@@ -2419,7 +2419,8 @@ int kvm_apic_local_deliver(struct kvm_la
 		trig_mode = reg & APIC_LVT_LEVEL_TRIGGER;
 
 		r = __apic_accept_irq(apic, mode, vector, 1, trig_mode, NULL);
-		if (r && lvt_type == APIC_LVTPC)
+		if (r && lvt_type == APIC_LVTPC &&
+		    guest_cpuid_is_intel_compatible(apic->vcpu))
 			kvm_lapic_set_reg(apic, APIC_LVTPC, reg | APIC_LVT_MASKED);
 		return r;
 	}
author maintainer
#61 lore raw

PATCH 61/71 arm64: hibernate: Fix level3 translation fault in swsusp_save()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yaxiong Tian <[email protected]>

commit 50449ca66cc5a8cbc64749cf4b9f3d3fc5f4b457 upstream.

On arm64 machines, swsusp_save() faults if it attempts to access MEMBLOCK_NOMAP memory ranges. This can be reproduced in QEMU using UEFI when booting with rodata=off debug_pagealloc=off and CONFIG_KFENCE=n:

  Unable to handle kernel paging request at virtual address ffffff8000000000
  Mem abort info:
    ESR = 0x0000000096000007
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
    FSC = 0x07: level 3 translation fault
  Data abort info:
    ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
    CM = 0, WnR = 0, TnD = 0, TagAccess = 0
    GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
  swapper pgtable: 4k pages, 39-bit VAs, pgdp=00000000eeb0b000
  [ffffff8000000000] pgd=180000217fff9803, p4d=180000217fff9803, pud=180000217fff9803, pmd=180000217fff8803, pte=0000000000000000
  Internal error: Oops: 0000000096000007 [#1] SMP
  Internal error: Oops: 0000000096000007 [#1] SMP
  Modules linked in: xt_multiport ipt_REJECT nf_reject_ipv4 xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_filter bpfilter rfkill at803x snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg dwmac_generic stmmac_platform snd_hda_codec stmmac joydev pcs_xpcs snd_hda_core phylink ppdev lp parport ramoops reed_solomon ip_tables x_tables nls_iso8859_1 vfat multipath linear amdgpu amdxcp drm_exec gpu_sched drm_buddy hid_generic usbhid hid radeon video drm_suballoc_helper drm_ttm_helper ttm i2c_algo_bit drm_display_helper cec drm_kms_helper drm
  CPU: 0 PID: 3663 Comm: systemd-sleep Not tainted 6.6.2+ #76
  Source Version: 4e22ed63a0a48e7a7cff9b98b7806d8d4add7dc0
  Hardware name: Greatwall GW-XXXXXX-XXX/GW-XXXXXX-XXX, BIOS KunLun BIOS V4.0 01/19/2021
  pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : swsusp_save+0x280/0x538
  lr : swsusp_save+0x280/0x538
  sp : ffffffa034a3fa40
  x29: ffffffa034a3fa40 x28: ffffff8000001000 x27: 0000000000000000
  x26: ffffff8001400000 x25: ffffffc08113e248 x24: 0000000000000000
  x23: 0000000000080000 x22: ffffffc08113e280 x21: 00000000000c69f2
  x20: ffffff8000000000 x19: ffffffc081ae2500 x18: 0000000000000000
  x17: 6666662074736420 x16: 3030303030303030 x15: 3038666666666666
  x14: 0000000000000b69 x13: ffffff9f89088530 x12: 00000000ffffffea
  x11: 00000000ffff7fff x10: 00000000ffff7fff x9 : ffffffc08193f0d0
  x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001
  x5 : ffffffa0fff09dc8 x4 : 0000000000000000 x3 : 0000000000000027
  x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000004e
  Call trace:
   swsusp_save+0x280/0x538
   swsusp_arch_suspend+0x148/0x190
   hibernation_snapshot+0x240/0x39c
   hibernate+0xc4/0x378
   state_store+0xf0/0x10c
   kobj_attr_store+0x14/0x24

The reason is swsusp_save() -> copy_data_pages() -> page_is_saveable() -> kernel_page_present() assuming that a page is always present when can_set_direct_map() is false (all of rodata_full, debug_pagealloc_enabled() and arm64_kfence_can_set_direct_map() false), irrespective of the MEMBLOCK_NOMAP ranges. Such MEMBLOCK_NOMAP regions should not be saved during hibernation.

This problem was introduced by changes to the pfn_valid() logic in commit a7d9f306ba70 ("arm64: drop pfn_valid_within() and simplify pfn_valid()").

Similar to other architectures, drop the !can_set_direct_map() check in kernel_page_present() so that page_is_savable() skips such pages.

---
 arch/arm64/mm/pageattr.c |    3 ---
 1 file changed, 3 deletions(-)
arch/arm64/mm/pageattr.c +0 -3
@@ -211,9 +211,6 @@ bool kernel_page_present(struct page *pa
 	pte_t *ptep;
 	unsigned long addr = (unsigned long)page_address(page);
 
-	if (!can_set_direct_map())
-		return true;
-
 	pgdp = pgd_offset_k(addr);
 	if (pgd_none(READ_ONCE(*pgdp)))
 		return false;
author maintainer
#62 lore raw

PATCH 62/71 init/main.c: Fix potential static_command_line memory overflow

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuntao Wang <[email protected]>

commit 46dad3c1e57897ab9228332f03e1c14798d2d3b9 upstream.

We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for static_command_line, but the strings copied into static_command_line are extra_command_line and command_line, rather than extra_command_line and boot_command_line.

When strlen(command_line) > strlen(boot_command_line), static_command_line will overflow.

This patch just recovers strlen(command_line) which was miss-consolidated with strlen(boot_command_line) in the commit f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")

Fixes f5c7310ac73e ("init/main: add checks for the return value of memblock_alloc*()")
---
 init/main.c |    2 ++
 1 file changed, 2 insertions(+)
init/main.c +2 -0
@@ -640,6 +640,8 @@ static void __init setup_command_line(ch
 	if (!saved_command_line)
 		panic("%s: Failed to allocate %zu bytes\n", __func__, len + ilen);
 
+	len = xlen + strlen(command_line) + 1;
+
 	static_command_line = memblock_alloc(len, SMP_CACHE_BYTES);
 	if (!static_command_line)
 		panic("%s: Failed to allocate %zu bytes\n", __func__, len);
author maintainer
#63 lore raw

PATCH 63/71 binder: check offset alignment in binder_get_object()

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Carlos Llamas <[email protected]>

commit aaef73821a3b0194a01bd23ca77774f704a04d40 upstream.

Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") introduced changes to how binder objects are copied. In doing so, it unintentionally removed an offset alignment check done through calls to binder_alloc_copy_from_buffer() -> check_buffer().

These calls were replaced in binder_get_object() with copy_from_user(), so now an explicit offset alignment check is needed here. This avoids later complications when unwinding the objects gets harder.

It is worth noting this check existed prior to commit 7a67a39320df ("binder: add function to copy binder object from buffer"), likely removed due to redundancy at the time.

Fixes 6d98eb95b450 ("binder: avoid potential data leakage when copying txn")
---
 drivers/android/binder.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/android/binder.c +3 -1
@@ -1678,8 +1678,10 @@ static size_t binder_get_object(struct b
 	size_t object_size = 0;
 
 	read_size = min_t(size_t, sizeof(*object), buffer->data_size - offset);
-	if (offset > buffer->data_size || read_size < sizeof(*hdr))
+	if (offset > buffer->data_size || read_size < sizeof(*hdr) ||
+	    !IS_ALIGNED(offset, sizeof(u32)))
 		return 0;
+
 	if (u) {
 		if (copy_from_user(object, u + offset, read_size))
 			return 0;
author maintainer
#64 lore raw

PATCH 64/71 drm/amdgpu: validate the parameters of bo mapping operations more clearly

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: xinhui pan <[email protected]>

commit 6fef2d4c00b5b8561ad68dd2b68173f5c6af1e75 upstream.

Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c |   72 +++++++++++++++++++++------------
 1 file changed, 46 insertions(+), 26 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +46 -26
@@ -2306,6 +2306,37 @@ static void amdgpu_vm_bo_insert_map(stru
 	trace_amdgpu_vm_bo_map(bo_va, mapping);
 }
 
+/* Validate operation parameters to prevent potential abuse */
+static int amdgpu_vm_verify_parameters(struct amdgpu_device *adev,
+					  struct amdgpu_bo *bo,
+					  uint64_t saddr,
+					  uint64_t offset,
+					  uint64_t size)
+{
+	uint64_t tmp, lpfn;
+
+	if (saddr & AMDGPU_GPU_PAGE_MASK
+	    || offset & AMDGPU_GPU_PAGE_MASK
+	    || size & AMDGPU_GPU_PAGE_MASK)
+		return -EINVAL;
+
+	if (check_add_overflow(saddr, size, &tmp)
+	    || check_add_overflow(offset, size, &tmp)
+	    || size == 0 /* which also leads to end < begin */)
+		return -EINVAL;
+
+	/* make sure object fit at this offset */
+	if (bo && offset + size > amdgpu_bo_size(bo))
+		return -EINVAL;
+
+	/* Ensure last pfn not exceed max_pfn */
+	lpfn = (saddr + size - 1) >> AMDGPU_GPU_PAGE_SHIFT;
+	if (lpfn >= adev->vm_manager.max_pfn)
+		return -EINVAL;
+
+	return 0;
+}
+
 /**
  * amdgpu_vm_bo_map - map bo inside a vm
  *
@@ -2332,21 +2363,14 @@ int amdgpu_vm_bo_map(struct amdgpu_devic
 	struct amdgpu_bo *bo = bo_va->base.bo;
 	struct amdgpu_vm *vm = bo_va->base.vm;
 	uint64_t eaddr;
+	int r;
 
-	/* validate the parameters */
-	if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK)
-		return -EINVAL;
-	if (saddr + size <= saddr || offset + size <= offset)
-		return -EINVAL;
-
-	/* make sure object fit at this offset */
-	eaddr = saddr + size - 1;
-	if ((bo && offset + size > amdgpu_bo_size(bo)) ||
-	    (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT))
-		return -EINVAL;
+	r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size);
+	if (r)
+		return r;
 
 	saddr /= AMDGPU_GPU_PAGE_SIZE;
-	eaddr /= AMDGPU_GPU_PAGE_SIZE;
+	eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
 
 	tmp = amdgpu_vm_it_iter_first(&vm->va, saddr, eaddr);
 	if (tmp) {
@@ -2399,17 +2423,9 @@ int amdgpu_vm_bo_replace_map(struct amdg
 	uint64_t eaddr;
 	int r;
 
-	/* validate the parameters */
-	if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK)
-		return -EINVAL;
-	if (saddr + size <= saddr || offset + size <= offset)
-		return -EINVAL;
-
-	/* make sure object fit at this offset */
-	eaddr = saddr + size - 1;
-	if ((bo && offset + size > amdgpu_bo_size(bo)) ||
-	    (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT))
-		return -EINVAL;
+	r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size);
+	if (r)
+		return r;
 
 	/* Allocate all the needed memory */
 	mapping = kmalloc(sizeof(*mapping), GFP_KERNEL);
@@ -2423,7 +2439,7 @@ int amdgpu_vm_bo_replace_map(struct amdg
 	}
 
 	saddr /= AMDGPU_GPU_PAGE_SIZE;
-	eaddr /= AMDGPU_GPU_PAGE_SIZE;
+	eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
 
 	mapping->start = saddr;
 	mapping->last = eaddr;
@@ -2510,10 +2526,14 @@ int amdgpu_vm_bo_clear_mappings(struct a
 	struct amdgpu_bo_va_mapping *before, *after, *tmp, *next;
 	LIST_HEAD(removed);
 	uint64_t eaddr;
+	int r;
+
+	r = amdgpu_vm_verify_parameters(adev, NULL, saddr, 0, size);
+	if (r)
+		return r;
 
-	eaddr = saddr + size - 1;
 	saddr /= AMDGPU_GPU_PAGE_SIZE;
-	eaddr /= AMDGPU_GPU_PAGE_SIZE;
+	eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE;
 
 	/* Allocate all the needed memory */
 	before = kzalloc(sizeof(*before), GFP_KERNEL);
author maintainer
#65 lore raw

PATCH 65/71 drm/vmwgfx: Sort primary plane formats by order of preference

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zack Rusin <[email protected]>

commit d4c972bff3129a9dd4c22a3999fd8eba1a81531a upstream.

The table of primary plane formats wasn't sorted at all, leading to applications picking our least desirable formats by defaults.

Sort the primary plane formats according to our order of preference.

Nice side-effect of this change is that it makes IGT's kms_atomic plane-invalid-params pass because the test picks the first format which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes which make Pixman, which IGT depends on assert due to the fact that our 16bpp formats aren't 32 bit aligned like Pixman requires all formats to be.

Fixes 36cc79bc9077 ("drm/vmwgfx: Add universal plane support")
Cc Broadcom internal kernel review list <[email protected]>
Cc <[email protected]> # v4.12+
---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +2 -2
@@ -246,10 +246,10 @@ struct vmw_framebuffer_bo {
 
 
 static const uint32_t __maybe_unused vmw_primary_plane_formats[] = {
-	DRM_FORMAT_XRGB1555,
-	DRM_FORMAT_RGB565,
 	DRM_FORMAT_XRGB8888,
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB1555,
 };
 
 static const uint32_t __maybe_unused vmw_cursor_plane_formats[] = {
author maintainer
#66 lore raw

PATCH 66/71 nouveau: fix instmem race condition around ptr stores

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dave Airlie <[email protected]>

commit fff1386cc889d8fb4089d285f883f8cba62d82ce upstream.

Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash.

BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27
Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1
RSP: 0000:ffffac20c5857838 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001
RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180
RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10
R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c
R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c
FS:  00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:

...

 ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau]
 ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau]
 nvkm_vmm_iter+0x351/0xa20 [nouveau]
 ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 ? __lock_acquire+0x3ed/0x2170
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau]
 ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau]
 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau]
 nvkm_vmm_map_locked+0x224/0x3a0 [nouveau]

Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm.

Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap.

If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read.

v2: use paired smp_rmb/smp_wmb.

Fixes be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj")
---
 drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c +6 -1
@@ -221,8 +221,11 @@ nv50_instobj_acquire(struct nvkm_memory
 	void __iomem *map = NULL;
 
 	/* Already mapped? */
-	if (refcount_inc_not_zero(&iobj->maps))
+	if (refcount_inc_not_zero(&iobj->maps)) {
+		/* read barrier match the wmb on refcount set */
+		smp_rmb();
 		return iobj->map;
+	}
 
 	/* Take the lock, and re-check that another thread hasn't
 	 * already mapped the object in the meantime.
@@ -249,6 +252,8 @@ nv50_instobj_acquire(struct nvkm_memory
 			iobj->base.memory.ptrs = &nv50_instobj_fast;
 		else
 			iobj->base.memory.ptrs = &nv50_instobj_slow;
+		/* barrier to ensure the ptrs are written before refcount is set */
+		smp_wmb();
 		refcount_set(&iobj->maps, 1);
 	}
 
author maintainer
#67 lore raw

PATCH 67/71 nilfs2: fix OOB in nilfs_set_de_type

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <[email protected]>

commit c4a7dc9523b59b3e73fd522c73e95e072f876b16 upstream.

The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function, which uses this array, specifies the index to read from the array in the same way as "(mode & S_IFMT) >> S_SHIFT".

static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode
*inode)

{
	umode_t mode = inode->i_mode;

	de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob
}

However, when the index is determined this way, an out-of-bounds (OOB) error occurs by referring to an index that is 1 larger than the array size when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a patch to resize the nilfs_type_by_mode array should be applied to prevent OOB errors.

---
 fs/nilfs2/dir.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/nilfs2/dir.c +1 -1
@@ -243,7 +243,7 @@ nilfs_filetype_table[NILFS_FT_MAX] = {
 
 #define S_SHIFT 12
 static unsigned char
-nilfs_type_by_mode[S_IFMT >> S_SHIFT] = {
+nilfs_type_by_mode[(S_IFMT >> S_SHIFT) + 1] = {
 	[S_IFREG >> S_SHIFT]	= NILFS_FT_REG_FILE,
 	[S_IFDIR >> S_SHIFT]	= NILFS_FT_DIR,
 	[S_IFCHR >> S_SHIFT]	= NILFS_FT_CHRDEV,
author maintainer
#68 lore raw

PATCH 68/71 net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arınç ÜNAL <[email protected]>

commit ff221029a51fd54cacac66e193e0c75e4de940e7 upstream.

MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU frames (further restricted by PCR_MATRIX).

Currently the driver sets the first CPU port as the single port in this bit mask, which works fine regardless of whether the device tree defines port 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's logic of picking the first CPU port as the CPU port that all user ports are affine to, by default.

An upcoming change would like to influence DSA's selection of the default CPU port to no longer be the first one, and in that case, this logic needs adaptation.

Since there is no observed leakage or duplication of frames if all CPU ports are defined in this bit mask, simply include them all.

---
 drivers/net/dsa/mt7530.c |   15 +++++++--------
 drivers/net/dsa/mt7530.h |    1 +
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/net/dsa/mt7530.c +7 -8
@@ -1232,6 +1232,13 @@ mt753x_cpu_port_enable(struct dsa_switch
 	if (priv->id == ID_MT7530 || priv->id == ID_MT7621)
 		mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
 
+	/* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames
+	 * will be forwarded to the CPU port that is affine to the inbound user
+	 * port.
+	 */
+	if (priv->id == ID_MT7531)
+		mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
+
 	/* CPU port gets connected to all user ports of
 	 * the switch.
 	 */
@@ -2510,16 +2517,8 @@ static int
 mt7531_setup_common(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
-	struct dsa_port *cpu_dp;
 	int ret, i;
 
-	/* BPDU to CPU port */
-	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
-		mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
-			   BIT(cpu_dp->index));
-		break;
-	}
-
 	mt753x_trap_frames(priv);
 
 	/* Enable and reset MIB counters */
drivers/net/dsa/mt7530.h +1 -0
@@ -58,6 +58,7 @@ enum mt753x_id {
 #define  MT7531_MIRROR_PORT_GET(x)	(((x) >> 16) & MIRROR_MASK)
 #define  MT7531_MIRROR_PORT_SET(x)	(((x) & MIRROR_MASK) << 16)
 #define  MT7531_CPU_PMAP_MASK		GENMASK(7, 0)
+#define  MT7531_CPU_PMAP(x)		FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
 
 #define MT753X_MIRROR_REG(id)		(((id) == ID_MT7531) ? \
 					 MT7531_CFC : MT7530_MFC)
author maintainer
#69 lore raw

PATCH 69/71 net: dsa: introduce preferred_default_local_cpu_port and use on MT7530

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vladimir Oltean <[email protected]>

commit b79d7c14f48083abb3fb061370c0c64a569edf4c upstream.

Since the introduction of the OF bindings, DSA has always had a policy that in case multiple CPU ports are present in the device tree, the numerically smallest one is always chosen.

The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because it has higher bandwidth.

The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port

Of course they chose the path of least resistance (3rd option), kicking the can down the road. The hardware description in the device tree is supposed to be stable - developers are not supposed to adopt the strategy of piecemeal hardware description, where the device tree is updated in lockstep with the features that the kernel currently supports.

Now, as a result of the fact that they did that, any attempts to modify the device tree and describe both CPU ports as CPU ports would make DSA change its default selection from port 6 to 5, effectively resulting in a performance degradation visible to users with the MT7531BE switch as can be seen below.

Without preferring port 6:

[ ID][Role] Interval Transfer Bitrate Retr

[  5][TX-C]   0.00-20.00  sec   374 MBytes   157 Mbits/sec  734    sender
[  5][TX-C]   0.00-20.00  sec   373 MBytes   156 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   778 Mbits/sec    0    sender
[  7][RX-C]   0.00-20.00  sec  1.81 GBytes   777 Mbits/sec    receiver

With preferring port 6:

[ ID][Role] Interval           Transfer     Bitrate         Retr
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   856 Mbits/sec  273    sender
[  5][TX-C]   0.00-20.00  sec  1.99 GBytes   855 Mbits/sec    receiver
[  7][RX-C]   0.00-20.00  sec  1.72 GBytes   737 Mbits/sec   15    sender
[  7][RX-C]   0.00-20.00  sec  1.71 GBytes   736 Mbits/sec    receiver

Using one port for WAN and the other ports for LAN is a very popular use case which is what this test emulates.

As such, this change proposes that we retroactively modify stable kernels (which don't support the modification of the CPU port assignments, so as to let user space fix the problem and restore the throughput) to keep the mt7530 driver preferring port 6 even with device trees where the hardware is more fully described.

---
 drivers/net/dsa/mt7530.c |   15 +++++++++++++++
 include/net/dsa.h        |    8 ++++++++
 net/dsa/dsa2.c           |   24 +++++++++++++++++++++++-
 3 files changed, 46 insertions(+), 1 deletion(-)
drivers/net/dsa/mt7530.c +15 -0
@@ -415,6 +415,20 @@ static void mt7530_pll_setup(struct mt75
 	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
 }
 
+/* If port 6 is available as a CPU port, always prefer that as the default,
+ * otherwise don't care.
+ */
+static struct dsa_port *
+mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds)
+{
+	struct dsa_port *cpu_dp = dsa_to_port(ds, 6);
+
+	if (dsa_port_is_cpu(cpu_dp))
+		return cpu_dp;
+
+	return NULL;
+}
+
 /* Setup port 6 interface mode and TRGMII TX circuit */
 static int
 mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
@@ -3381,6 +3395,7 @@ static int mt753x_set_mac_eee(struct dsa
 static const struct dsa_switch_ops mt7530_switch_ops = {
 	.get_tag_protocol	= mtk_get_tag_protocol,
 	.setup			= mt753x_setup,
+	.preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port,
 	.get_strings		= mt7530_get_strings,
 	.get_ethtool_stats	= mt7530_get_ethtool_stats,
 	.get_sset_count		= mt7530_get_sset_count,
include/net/dsa.h +8 -0
@@ -706,6 +706,14 @@ struct dsa_switch_ops {
 	void	(*port_disable)(struct dsa_switch *ds, int port);
 
 	/*
+	 * Compatibility between device trees defining multiple CPU ports and
+	 * drivers which are not OK to use by default the numerically smallest
+	 * CPU port of a switch for its local ports. This can return NULL,
+	 * meaning "don't know/don't care".
+	 */
+	struct dsa_port *(*preferred_default_local_cpu_port)(struct dsa_switch *ds);
+
+	/*
 	 * Port's MAC EEE settings
 	 */
 	int	(*set_mac_eee)(struct dsa_switch *ds, int port,
net/dsa/dsa2.c +23 -1
@@ -386,6 +386,24 @@ static int dsa_tree_setup_default_cpu(st
 	return 0;
 }
 
+static struct dsa_port *
+dsa_switch_preferred_default_local_cpu_port(struct dsa_switch *ds)
+{
+	struct dsa_port *cpu_dp;
+
+	if (!ds->ops->preferred_default_local_cpu_port)
+		return NULL;
+
+	cpu_dp = ds->ops->preferred_default_local_cpu_port(ds);
+	if (!cpu_dp)
+		return NULL;
+
+	if (WARN_ON(!dsa_port_is_cpu(cpu_dp) || cpu_dp->ds != ds))
+		return NULL;
+
+	return cpu_dp;
+}
+
 /* Perform initial assignment of CPU ports to user ports and DSA links in the
  * fabric, giving preference to CPU ports local to each switch. Default to
  * using the first CPU port in the switch tree if the port does not have a CPU
@@ -393,12 +411,16 @@ static int dsa_tree_setup_default_cpu(st
  */
 static int dsa_tree_setup_cpu_ports(struct dsa_switch_tree *dst)
 {
-	struct dsa_port *cpu_dp, *dp;
+	struct dsa_port *preferred_cpu_dp, *cpu_dp, *dp;
 
 	list_for_each_entry(cpu_dp, &dst->ports, list) {
 		if (!dsa_port_is_cpu(cpu_dp))
 			continue;
 
+		preferred_cpu_dp = dsa_switch_preferred_default_local_cpu_port(cpu_dp->ds);
+		if (preferred_cpu_dp && preferred_cpu_dp != cpu_dp)
+			continue;
+
 		list_for_each_entry(dp, &dst->ports, list) {
 			/* Prefer a local CPU port */
 			if (dp->ds != cpu_dp->ds)
author maintainer
#70 lore raw

PATCH 70/71 net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arınç ÜNAL <[email protected]>

commit 5f563c31ff0c40ce395d0bae7daa94c7950dac97 upstream.

The MT7530 switch after reset initialises with a core clock frequency that works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock frequency must be set to 500MHz.

The mt7530_pll_setup() function is responsible of setting the core clock frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This causes MT7530 switch with 25MHz XTAL to egress and ingress frames improperly.

Introduce a check to run it only on MT7530 with 40MHz XTAL.

The core clock frequency is set by writing to a switch PHY's register. Access to the PHY's register is done via the MDIO bus the switch is also on. Therefore, it works only when the switch makes switch PHYs listen on the MDIO bus the switch is on. This is controlled either by the state of the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the modifiable trap register.

When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means accessing PHY registers via the PHY indirect access control register of the switch.

When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means accessing PHY registers via the MDIO bus the switch is on.

For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high, the core clock frequency won't be set to 500MHz, causing the switch to egress and ingress frames improperly.

Run mt7530_pll_setup() after PHY direct access is set on the modifiable trap register.

With these two changes, all MT7530 switches with 25MHz and 40MHz, and P1_LED_1 pulled high or low, will egress and ingress frames properly.

---
 drivers/net/dsa/mt7530.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/net/dsa/mt7530.c +3 -2
@@ -2410,8 +2410,6 @@ mt7530_setup(struct dsa_switch *ds)
 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
 		     SYS_CTRL_REG_RST);
 
-	mt7530_pll_setup(priv);
-
 	/* Lower Tx driving for TRGMII path */
 	for (i = 0; i < NUM_TRGMII_CTRL; i++)
 		mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
@@ -2429,6 +2427,9 @@ mt7530_setup(struct dsa_switch *ds)
 
 	priv->p6_interface = PHY_INTERFACE_MODE_NA;
 
+	if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
+		mt7530_pll_setup(priv);
+
 	mt753x_trap_frames(priv);
 
 	/* Enable and reset MIB counters */
author maintainer
#71 lore raw

PATCH 71/71 net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards

In reply to Greg Kroah-Hartman

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arınç ÜNAL <[email protected]>

commit 06dfcd4098cfdc4d4577d94793a4f9125386da8b upstream.

The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features") brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board (bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to SkyLake Huang (黃啟澤) from MediaTek for providing information on the internal EEE switch bit.

There are existing boards that were not designed to pull the pin low. Because of that, the EEE status currently depends on the board design.

The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually used to control an LED. Once the bit is unset, the pin will be low. That will make the active low LED turn on. The pin is controlled by the switch PHY. It seems that the PHY controls the pin in the way that it inverts the pin state. That means depending on the wiring of the LED connected to LAN2LED0 on the board, the LED may be on without an active link.

To not cause this unwanted behaviour whilst enabling EEE on all boards, set the internal EEE switch bit on the CORE_PLL_GROUP4 register.

My testing on MT7531 shows a certain amount of traffic loss when EEE is enabled. That said, I haven't come across a board that enables EEE. So enable EEE on the switch MACs but disable EEE advertisement on the switch PHYs. This way, we don't change the behaviour of the majority of the boards that have this switch. The mediatek-ge PHY driver already disables EEE advertisement on the switch PHYs but my testing shows that it is somehow enabled afterwards. Disabling EEE advertisement before the PHY driver initialises keeps it off.

With this change, EEE can now be enabled using ethtool.

---
 drivers/net/dsa/mt7530.c |   19 +++++++++++++------
 drivers/net/dsa/mt7530.h |    1 +
 2 files changed, 14 insertions(+), 6 deletions(-)
drivers/net/dsa/mt7530.c +13 -6
@@ -2587,7 +2587,7 @@ mt7531_setup(struct dsa_switch *ds)
 	struct mt7530_priv *priv = ds->priv;
 	struct mt7530_dummy_poll p;
 	u32 val, id;
-	int ret;
+	int ret, i;
 
 	/* Reset whole chip through gpio pin or memory-mapped registers for
 	 * different type of hardware
@@ -2647,18 +2647,25 @@ mt7531_setup(struct dsa_switch *ds)
 	priv->p5_interface = PHY_INTERFACE_MODE_NA;
 	priv->p6_interface = PHY_INTERFACE_MODE_NA;
 
-	/* Enable PHY core PLL, since phy_device has not yet been created
-	 * provided for phy_[read,write]_mmd_indirect is called, we provide
-	 * our own mt7531_ind_mmd_phy_[read,write] to complete this
-	 * function.
+	/* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
+	 * phy_device has not yet been created provided for
+	 * phy_[read,write]_mmd_indirect is called, we provide our own
+	 * mt7531_ind_mmd_phy_[read,write] to complete this function.
 	 */
 	val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
 				      MDIO_MMD_VEND2, CORE_PLL_GROUP4);
-	val |= MT7531_PHY_PLL_BYPASS_MODE;
+	val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
 	val &= ~MT7531_PHY_PLL_OFF;
 	mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
 				 CORE_PLL_GROUP4, val);
 
+	/* Disable EEE advertisement on the switch PHYs. */
+	for (i = MT753X_CTRL_PHY_ADDR;
+	     i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+		mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+					 0);
+	}
+
 	mt7531_setup_common(ds);
 
 	/* Setup VLAN ID 0 for VLAN-unaware bridges */
drivers/net/dsa/mt7530.h +1 -0
@@ -673,6 +673,7 @@ enum mt7531_clk_skew {
 #define  RG_SYSPLL_DDSFBK_EN		BIT(12)
 #define  RG_SYSPLL_BIAS_EN		BIT(11)
 #define  RG_SYSPLL_BIAS_LPF_EN		BIT(10)
+#define  MT7531_RG_SYSPLL_DMY2		BIT(6)
 #define  MT7531_PHY_PLL_OFF		BIT(5)
 #define  MT7531_PHY_PLL_BYPASS_MODE	BIT(4)
 
maintainer Tested-by on the v1 series
#72 lore raw
In reply to Greg Kroah-Hartman

Hello,

Quoted 5 lines · On Tue, 23 Apr 2024 14:39:13 -0700 Greg Kroah-Hartman…

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] 70f39a25a6b8 ("Linux 5.15.157-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_m68k.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m

Tested-by on the v1 series
#73 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Signature · 1 line
Florian
Tested-by on the v1 series
#74 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.15.y

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#75 lore raw
In reply to Greg Kroah-Hartman

Hi!

Quoted 4 lines

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

I realise 5.10 is not released, yet, but current queue results in problems.

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/jobs/6700369930

kernel/trace/ring_buffer.c: In function 'rb_tail_page_update':
2028kernel/trace/ring_buffer.c:1479:7: error: implicit declaration of function 'try_cmpxchg'; did you mean 'xa_cmpxchg'? [-Werror=implicit-function-declaration]

2029 1479 |   if (try_cmpxchg(&cpu_buffer->tail_page, &tail_page, next_page))
2030      |       ^~~~~~~~~~~
2031      |       xa_cmpxchg

Best regards,
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,        Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#76 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

The s390 defconfig build failed with gcc-12 and clang-17 on the Linux stable-rc linux.5.15.y branch.

Build log:
---
drivers/s390/cio/qdio_main.c: In function 'qdio_int_handler':
drivers/s390/cio/qdio_main.c:761:52: error: incompatible type for argument 2 of 'ccw_device_start'
761 | rc = ccw_device_start(cdev, irq_ptr->ccw,
intparm, 0, 0);

      |                                             ~~~~~~~^~~~~
      |                                                    |
      |                                                    struct ccw1
In file included from arch/s390/include/asm/qdio.h:13,
                 from drivers/s390/cio/qdio_main.c:18:

arch/s390/include/asm/ccwdev.h:172:50: note: expected 'struct ccw1 *' but argument is of type 'struct ccw1'
172 | extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
| ^~~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:289: drivers/s390/cio/qdio_main.o] Error 1

Suspected commit:
--------
s390/qdio: handle deferred cc1
[ Upstream commit 607638faf2ff1cede37458111496e7cc6c977f6f ]

Steps to reproduce:
---

# tuxmake --runtime podman --target-arch s390 --toolchain gcc-12
--kconfig defconfig

Links:
- https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.156-72-g70f39a25a6b8/testrun/23638097/suite/build/test/gcc-12-defconfig/details/
- https://storage.tuxsuite.com/public/linaro/lkft/builds/2fWFs1EvyrjLKUD3D6ODW0Agksv/

--
Linaro LKFT
https://lkft.linaro.org

#77 lore raw
Quoted 46 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

The s390 defconfig build failed with gcc-12 and clang-17 on the Linux stable-rc linux.5.15.y branch.

Build log:
---
drivers/s390/cio/qdio_main.c: In function 'qdio_int_handler':
drivers/s390/cio/qdio_main.c:761:52: error: incompatible type for argument 2 of 'ccw_device_start'
761 | rc = ccw_device_start(cdev, irq_ptr->ccw,
intparm, 0, 0);

      |                                             ~~~~~~~^~~~~
      |                                                    |
      |                                                    struct ccw1
In file included from arch/s390/include/asm/qdio.h:13,
                 from drivers/s390/cio/qdio_main.c:18:

arch/s390/include/asm/ccwdev.h:172:50: note: expected 'struct ccw1 *' but argument is of type 'struct ccw1'
172 | extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
| ^~~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:289: drivers/s390/cio/qdio_main.o] Error 1

Quoted 4 lines

Suspected commit:
--------
s390/qdio: handle deferred cc1
[ Upstream commit 607638faf2ff1cede37458111496e7cc6c977f6f ]

This is due to a type change of field 'ccw' in 'struct qdio_irq' that was introduced in v5.17 via commit 718ce9e10171 ("s390/qdio: avoid allocating the qdio_irq with GFP_DMA").

The following change to commit 607638faf2ff ("s390/qdio: handle deferred cc1") fixes the compile error on v5.15:

drivers/s390/cio/qdio_main.c +1 -1
@@ -758,7 +758,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 
 	if (rc == -EAGAIN) {
 		DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qint retry");
-		rc = ccw_device_start(cdev, irq_ptr->ccw, intparm, 0, 0);
+		rc = ccw_device_start(cdev, &irq_ptr->ccw, intparm, 0, 0);
 		if (!rc)
 			return;
 		DBF_ERROR("%4x RETRY ERR", irq_ptr->schid.sch_no);
author maintainer
#78 lore raw
Quoted 64 lines · Peter Oberparleiter
Quoted 46 lines · Naresh Kamboju
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

The s390 defconfig build failed with gcc-12 and clang-17 on the Linux stable-rc linux.5.15.y branch.

Build log:
---
drivers/s390/cio/qdio_main.c: In function 'qdio_int_handler':
drivers/s390/cio/qdio_main.c:761:52: error: incompatible type for argument 2 of 'ccw_device_start'
761 | rc = ccw_device_start(cdev, irq_ptr->ccw,
intparm, 0, 0);

      |                                             ~~~~~~~^~~~~
      |                                                    |
      |                                                    struct ccw1
In file included from arch/s390/include/asm/qdio.h:13,
                 from drivers/s390/cio/qdio_main.c:18:

arch/s390/include/asm/ccwdev.h:172:50: note: expected 'struct ccw1 *' but argument is of type 'struct ccw1'
172 | extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
| ^~~~~~~~~~~~~
make[3]: *** [scripts/Makefile.build:289: drivers/s390/cio/qdio_main.o] Error 1

Quoted 4 lines

Suspected commit:
--------
s390/qdio: handle deferred cc1
[ Upstream commit 607638faf2ff1cede37458111496e7cc6c977f6f ]

This is due to a type change of field 'ccw' in 'struct qdio_irq' that was introduced in v5.17 via commit 718ce9e10171 ("s390/qdio: avoid allocating the qdio_irq with GFP_DMA").

The following change to commit 607638faf2ff ("s390/qdio: handle deferred cc1") fixes the compile error on v5.15:

drivers/s390/cio/qdio_main.c void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, · line 764

Quoted 8 lines
drivers/s390/cio/qdio_main.c +1 -1
@@ -758,7 +758,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 
 	if (rc == -EAGAIN) {
 		DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qint retry");
-		rc = ccw_device_start(cdev, irq_ptr->ccw, intparm, 0, 0);
+		rc = ccw_device_start(cdev, &irq_ptr->ccw, intparm, 0, 0);
 		if (!rc)
 			return;
 		DBF_ERROR("%4x RETRY ERR", irq_ptr->schid.sch_no);

Fix now made, thanks for this!

greg k-h

Tested-by on the v1 series
#79 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by on the v1 series
#80 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

No problems seen on x86_64 and aarch64 with our testing.

Thanks,
Harshit

Quoted 11 lines

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------

maintainer Tested-by on the v1 series
#81 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v5.15:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    102 tests:	102 pass, 0 fail

Linux version: 5.15.157-rc1-g70f39a25a6b8
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by kernelci.org bot on the v1 series
#82 lore raw
In reply to Greg Kroah-Hartman
Quoted 5 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 5.15.157 release. There are 71 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 9 lines

Responses should be made by Thu, 25 Apr 2024 21:38:28 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.157-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

KernelCI report for stable-rc/linux-5.15.y for this week.

## stable-rc HEAD for linux-5.15.y:
Date: 2024-04-23
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/log/?h=70f39a25a6b86d04f5693eac9b6f203ed23d8260

## Build failures:
No build failures seen for the stable-rc/linux-5.15.y commit head \o/

## Boot failures:
No **new** boot failures seen for the stable-rc/linux-5.15.y commit head \o/

Thanks,
Shreeya Patel