sunxi: devicetree updates plus new boards
Subsystems (2)
cover sunxi: devicetree updates plus new boards
This updates the Allwinner related devicetree files from the Linux kernel repository. The files were taken from Linux v6.9-rc4, and adjusted to increase compatibility with older kernels.
This also adds board support for two new devices: the old Remix Mini PC, a TV box like "Android desktop" device from 2015, and the Tanix TX1, which is a tiny TV box with an H313 SoC.
The DT for the latter is preliminary for now, as it hasn't been merged into Linus' tree yet - though that's supposed to happen in about a few weeks time.
Please have a look!
Cheers,
Andre
Andre Przywara (4):
sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9-rc4
sunxi: a64: Add Remix Mini PC support
[DO NOT MERGE] sunxi: dts: arm64: add Tanix TX1 DT from Linux
sunxi: H616: add Tanix TX1 support
arch/arm/dts/Makefile | 4 +- arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 +++++++++ arch/arm/dts/sun50i-h6-beelink-gs1.dts | 2 + arch/arm/dts/sun50i-h6-tanix.dtsi | 2 + arch/arm/dts/sun50i-h6.dtsi | 7 +- .../dts/sun50i-h616-bigtreetech-cb1-manta.dts | 2 +- arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 4 +- arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 2 +- arch/arm/dts/sun50i-h616.dtsi | 155 ++++++++ .../arm/dts/sun50i-h618-longan-module-3h.dtsi | 75 ++++ arch/arm/dts/sun50i-h618-longanpi-3h.dts | 144 +++++++ .../arm/dts/sun50i-h618-transpeed-8k618-t.dts | 23 ++ arch/arm/dts/sun50i-h64-remix-mini-pc.dts | 356 ++++++++++++++++++ arch/arm/dts/sun8i-r40-feta40i.dtsi | 7 + configs/remix-mini-pc_defconfig | 14 + configs/tanix_tx1_defconfig | 25 ++ 16 files changed, 996 insertions(+), 9 deletions(-) create mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts create mode 100644 arch/arm/dts/sun50i-h618-longan-module-3h.dtsi create mode 100644 arch/arm/dts/sun50i-h618-longanpi-3h.dts create mode 100644 arch/arm/dts/sun50i-h64-remix-mini-pc.dts create mode 100644 configs/remix-mini-pc_defconfig create mode 100644 configs/tanix_tx1_defconfig
Signature · 1 line
2.35.8
PATCH 1/4 sunxi: dts: arm/arm64: update devicetree files from Linux-v6.9-rc4
Sync the devicetree files from the official Linux kernel tree, v6.9-rc4. This is covering Allwinner SoCs with 32-bit and 64-bit ARM cores.
Besides some cosmectic changes, this adds S/PDIF, DMA, and thermal support to the H616 .dtsi. Nothing that U-Boot needs for itself, but helpful to pass on to kernels.
This also adds new devicetrees, for some LonganPi H616 board, and the Remix Mini PC. The latter will get a defconfig next.
As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels.
--- arch/arm/dts/sun50i-h6-beelink-gs1.dts | 2 + arch/arm/dts/sun50i-h6-tanix.dtsi | 2 + arch/arm/dts/sun50i-h6.dtsi | 7 +- .../dts/sun50i-h616-bigtreetech-cb1-manta.dts | 2 +- arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi | 4 +- arch/arm/dts/sun50i-h616-bigtreetech-pi.dts | 2 +- arch/arm/dts/sun50i-h616.dtsi | 155 ++++++++ .../arm/dts/sun50i-h618-longan-module-3h.dtsi | 75 ++++ arch/arm/dts/sun50i-h618-longanpi-3h.dts | 144 +++++++ .../arm/dts/sun50i-h618-transpeed-8k618-t.dts | 23 ++ arch/arm/dts/sun50i-h64-remix-mini-pc.dts | 356 ++++++++++++++++++ arch/arm/dts/sun8i-r40-feta40i.dtsi | 7 + 12 files changed, 771 insertions(+), 8 deletions(-) create mode 100644 arch/arm/dts/sun50i-h618-longan-module-3h.dtsi create mode 100644 arch/arm/dts/sun50i-h618-longanpi-3h.dts create mode 100644 arch/arm/dts/sun50i-h64-remix-mini-pc.dts
arch/arm/dts/sun50i-h6-beelink-gs1.dts +2 -0
@@ -291,6 +291,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; };
arch/arm/dts/sun50i-h6-tanix.dtsi +2 -0
@@ -166,6 +166,8 @@ }; &spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; };
arch/arm/dts/sun50i-h6.dtsi +3 -4
@@ -405,6 +405,7 @@ function = "spi1"; }; + /omit-if-no-ref/ spdif_tx_pin: spdif-tx-pin { pins = "PH7"; function = "spdif";
@@ -654,10 +655,8 @@ clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; clock-names = "apb", "spdif"; resets = <&ccu RST_BUS_SPDIF>; - dmas = <&dma 2>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pin>; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; status = "disabled"; };
arch/arm/dts/sun50i-h616-bigtreetech-cb1-manta.dts +1 -1
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <[email protected]>. */
arch/arm/dts/sun50i-h616-bigtreetech-cb1.dtsi +2 -2
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <[email protected]>. */
@@ -93,7 +93,7 @@ interrupt-controller; #interrupt-cells = <1>; - regulators{ + regulators { reg_dcdc1: dcdc1 { regulator-name = "vdd-gpu-sys"; regulator-min-microvolt = <810000>;
arch/arm/dts/sun50i-h616-bigtreetech-pi.dts +1 -1
@@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2023 Martin Botka <[email protected]>. */
arch/arm/dts/sun50i-h616.dtsi +155 -0
278 lines not on this page · raw message
arch/arm/dts/sun50i-h618-longan-module-3h.dtsi new file +75 -0
75 lines not on this page · raw message
arch/arm/dts/sun50i-h618-longanpi-3h.dts new file +144 -0
144 lines not on this page · raw message
arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts +23 -0
@@ -15,6 +15,7 @@ compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; aliases { + ethernet1 = &sdio_wifi; serial0 = &uart0; };
@@ -39,6 +40,15 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; }; &ehci0 {
@@ -60,6 +70,19 @@ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + &mmc2 { vmmc-supply = <®_dldo1>; vqmmc-supply = <®_aldo1>;
arch/arm/dts/sun50i-h64-remix-mini-pc.dts new file +356 -0
356 lines not on this page · raw message
arch/arm/dts/sun8i-r40-feta40i.dtsi +7 -0
@@ -42,6 +42,13 @@ vcc-pg-supply = <®_dldo1>; }; +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-tv-usb"; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>;
Signature · 1 line
2.35.8
PATCH 2/4 sunxi: a64: Add Remix Mini PC support
In reply to Andre PrzywaraThe Remix Mini PC is a "mini computer" using the Allwinner H64 SoC, which appears to be just a relabelled A64. It was launched in 2015 by the now defunct company Jide, and shipped with a desktop optimised version of Android. Its appearance and feature set is close to a typical TV box.
The devicetree file has been imported from the Linux tree already, so just add a defconfig and enable the DTB build in the Makefile. The SoC has the "secure boot" fuse burnt, so we need to generate a TOC0 image instead of the standard Allwinner eGON image format for the SPL.
--- arch/arm/dts/Makefile | 3 ++- configs/remix-mini-pc_defconfig | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) create mode 100644 configs/remix-mini-pc_defconfig
arch/arm/dts/Makefile +2 -1
@@ -801,7 +801,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-pinephone-1.2.dtb \ sun50i-a64-pinetab.dtb \ sun50i-a64-sopine-baseboard.dtb \ - sun50i-a64-teres-i.dtb + sun50i-a64-teres-i.dtb \ + sun50i-h64-remix-mini-pc.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb \
configs/remix-mini-pc_defconfig new file +14 -0
@@ -0,0 +1,14 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h64-remix-mini-pc" +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=4013533 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CMD_POWEROFF=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y
Signature · 1 line
2.35.8
PATCH 3/4 sunxi: dts: arm64: add Tanix TX1 DT from Linux
In reply to Andre PrzywaraAdd the board DT file for the Tanix TX1 TV box, with the H313 SoC. This has been taken from the sunxi/for-next tree, though it has not been merged into any other tree yet.
So this is a placeholder for now, to enable the board support, and will be superseded by the regular sync of the DT files later.
--- arch/arm/dts/sun50i-h313-tanix-tx1.dts | 183 +++++++++++++++++++++++++ 1 file changed, 183 insertions(+) create mode 100644 arch/arm/dts/sun50i-h313-tanix-tx1.dts
arch/arm/dts/sun50i-h313-tanix-tx1.dts new file +183 -0
@@ -0,0 +1,183 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Tanix TX1"; + compatible = "oranth,tanix-tx1", "allwinner,sun50i-h616"; + + aliases { + serial0 = &uart0; + ethernet0 = &sdio_wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key { + label = "hidden"; + linux,code = <BTN_0>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + default-state = "on"; + }; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + max-frequency = <100000000>; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_dldo1>; + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* Supplies VCC-PLL, so needs to be always on. */ + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Supplies VCC-IO, so needs to be always on. */ + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1120000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +};
Signature · 1 line
2.35.8
PATCH 4/4 sunxi: H616: add Tanix TX1 support
In reply to Andre PrzywaraThe Tanix TX1 is a tiny TV box, featuring the Allwinner H313 SoC with up to 2GB of DRAM and 16GB of eMMC. There is no SD card or Ethernet port on this small device, but it can be booted via the USB debug "FEL" mode. The bootloader could then be written to the eMMC.
Add the defconfig for that board, and add the devicetree file to the Makefile, for it to be built.
The DRAM parameters were taken from the vendor firmware on the eMMC.
--- arch/arm/dts/Makefile | 1 + configs/tanix_tx1_defconfig | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+) create mode 100644 configs/tanix_tx1_defconfig
arch/arm/dts/Makefile +1 -0
@@ -779,6 +779,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \ sun50i-h6-tanix-tx6.dtb \ sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_MACH_SUN50I_H616) += \ + sun50i-h313-tanix-tx1.dtb \ sun50i-h616-orangepi-zero2.dtb \ sun50i-h618-orangepi-zero2w.dtb \ sun50i-h618-orangepi-zero3.dtb \
configs/tanix_tx1_defconfig new file +25 -0
@@ -0,0 +1,25 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h313-tanix-tx1" +CONFIG_SPL=y +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x06060606 +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0d0d0d0d +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1919 +CONFIG_DRAM_SUN50I_H616_ODT_EN=0x9988eeee +CONFIG_DRAM_SUN50I_H616_TPR6=0x2fb08080 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f4469 +CONFIG_DRAM_SUN50I_H616_TPR11=0x0e0f0d0d +CONFIG_DRAM_SUN50I_H616_TPR12=0x11131213 +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR3=y +CONFIG_R_I2C_ENABLE=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C=y +CONFIG_SPL_SYS_I2C_LEGACY=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_SYS_I2C_SLAVE=0x7f +CONFIG_SYS_I2C_SPEED=400000 +CONFIG_AXP313_POWER=y +CONFIG_AXP_DCDC3_VOLT=1200 +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y
Signature · 1 line
2.35.8