s390/pgtable: misc small improvements
cover s390/pgtable: misc small improvements
This series has two small improvements for the s390 page tables.
The first aligns the layout of large puds with that of large pmds; there is no reason for the large pud read and write softbits to be swapped compared to large pmds.
The second introduces _REGION3_ENTRY_HARDWARE_BITS_LARGE, for completeness, which is a bitmask of the hardware bits for large puds.
Claudio Imbrenda (2):
s390/pgtable: switch read and write softbits for puds s390/pgtable: introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE
arch/s390/include/asm/pgtable.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
Signature · 1 line
2.44.0
PATCH 1/2 s390/pgtable: switch read and write softbits for puds
There is no reason for the read and write softbits to be swapped in the puds compared to pmds. They are different only because the softbits for puds were introduced at the same time when the softbits for pmds were swapped.
The current implementation is not wrong per se, since the macros are defined correctly; only the documentation does not reflect reality.
With this patch, the read and write softbits for large pmd and large puds will have the same layout, and will match the existing documentation.
--- arch/s390/include/asm/pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/s390/include/asm/pgtable.h +2 -2
@@ -266,8 +266,8 @@ static inline int is_module_addr(void *addr)#define _REGION3_ENTRY_DIRTY 0x2000/* SW region dirty bit */ #define _REGION3_ENTRY_YOUNG 0x1000/* SW region young bit */ #define _REGION3_ENTRY_LARGE 0x0400/* RTTE-format control, large page */ -#define _REGION3_ENTRY_READ 0x0002/* SW region read bit */ -#define _REGION3_ENTRY_WRITE 0x0001/* SW region write bit */ +#define _REGION3_ENTRY_WRITE 0x0002/* SW region write bit */ +#define _REGION3_ENTRY_READ 0x0001/* SW region read bit */ #ifdef CONFIG_MEM_SOFT_DIRTY #define _REGION3_ENTRY_SOFT_DIRTY 0x4000/* SW region soft dirty bit */
Signature · 1 line
2.44.0
Re: [PATCH v1 1/2] s390/pgtable: switch read and write softbits for puds
Quoted 8 lines · Claudio Imbrenda
There is no reason for the read and write softbits to be swapped in the puds compared to pmds. They are different only because the softbits for puds were introduced at the same time when the softbits for pmds were swapped.
The current implementation is not wrong per se, since the macros are defined correctly; only the documentation does not reflect reality.
Quoted 8 lines
With this patch, the read and write softbits for large pmd and large puds will have the same layout, and will match the existing documentation.
Signed-off-by Claudio Imbrenda <[email protected]>--- arch/s390/include/asm/pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
PATCH 2/2 s390/pgtable: introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE
In reply to Claudio ImbrendaFor completeness, introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE, containing the hardware bits used for large puds.
--- arch/s390/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+)
arch/s390/include/asm/pgtable.h +1 -0
@@ -262,6 +262,7 @@ static inline int is_module_addr(void *addr)#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INVALID) +#define _REGION3_ENTRY_HARDWARE_BITS_LARGE 0xffffffff8000073cUL#define _REGION3_ENTRY_ORIGIN_LARGE ~0x7fffffffUL/* large page address */ #define _REGION3_ENTRY_DIRTY 0x2000/* SW region dirty bit */ #define _REGION3_ENTRY_YOUNG 0x1000/* SW region young bit */
Signature · 1 line
2.44.0
Heiko Carstens
maintainerRe: [PATCH v1 2/2] s390/pgtable: introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE
Quoted 13 lines · Claudio Imbrenda
For completeness, introduce
_REGION3_ENTRY_HARDWARE_BITS_LARGE, containing the hardware bits used for large puds.Signed-off-by Claudio Imbrenda <[email protected]>--- arch/s390/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+)arch/s390/include/asm/pgtable.h +0
-0
arch/s390/include/asm/pgtable.h static inline int is_module_addr(void *addr) · line 265
Quoted 4 lines
arch/s390/include/asm/pgtable.h +1
-0@@ -262,6 +262,7 @@ static inline int is_module_addr(void *addr)#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INVALID) +#define _REGION3_ENTRY_HARDWARE_BITS_LARGE 0xffffffff8000073cUL
_REGION_ENTRY_HARDWARE_BITS is missing too. :)
And this definition also raises the question if the definition of _SEGMENT_ENTRY_HARDWARE_BITS_LARGE should be changed so it also includes the table type bits, which it probably should.
These masks are really a bit randomly defined and assume that the ACCF-Validity control bit is never set, and therefore the ACC bitfield can be assumed to be software bits (and they are used as such for format 1 segment table entries).
But the ACCF bit is also a hardware bit in any case... oh well.
Re: [PATCH v1 2/2] s390/pgtable: introduce _REGION3_ENTRY_HARDWARE_BITS_LARGE
Quoted 17 lines · On Fri, 26 Apr 2024 10:57:14 +0200 Heiko Carstens <[email protected]> wrote:
Quoted 16 lines · Claudio Imbrenda
For completeness, introduce
_REGION3_ENTRY_HARDWARE_BITS_LARGE, containing the hardware bits used for large puds.Signed-off-by Claudio Imbrenda <[email protected]>--- arch/s390/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+)arch/s390/include/asm/pgtable.h +0
-0@@ -262,6 +262,7 @@ static inline int is_module_addr(void *addr)#define _REGION3_ENTRY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)#define _REGION3_ENTRY_EMPTY (_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INVALID)
Quoted 3 lines
arch/s390/include/asm/pgtable.h static inline int is_module_addr(void *addr) · line 265
Quoted 1 line
arch/s390/include/asm/pgtable.h +1
-0+#define _REGION3_ENTRY_HARDWARE_BITS_LARGE 0xffffffff8000073cUL
_REGION_ENTRY_HARDWARE_BITSis missing too. :)
right, I will fix it
Quoted 4 lines
And this definition also raises the question if the definition of
_SEGMENT_ENTRY_HARDWARE_BITS_LARGEshould be changed so it also includes the table type bits, which it probably should.
tbh I agree
Quoted 7 lines
These masks are really a bit randomly defined and assume that the ACCF-Validity control bit is never set, and therefore the ACC bitfield can be assumed to be software bits (and they are used as such for format 1 segment table entries).
But the ACCF bit is also a hardware bit in any case... oh well.
probably the ACCF bit should also be marked as hardware bit (I had actually thought about it, but we don't do it for segments and I wanted it to be consistent)
I'll send a v2 with:
segment table type bits
ACCF bit (both for segments and region3_REGION3_ENTRY_HARDWARE_BITS