dt-bindings: arm: ti: Add BeagleY-AI
Subsystems (2)
PATCH v2 1/2 dt-bindings: arm: ti: Add BeagleY-AI
This board is based on ti,j722s family using the am67a variation.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-ai
---
Changes since v1:
- switched to the TI model am67a over the family name j722s
--- Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +1 -0
@@ -134,6 +134,7 @@ properties: - description: K3 J722S SoC and Boards items: - enum: + - beagle,am67a-beagley-ai - ti,j722s-evm - const: ti,j722s
Signature · 1 line
2.39.2
PATCH v2 2/2 arm64: dts: ti: Add k3-am67a-beagley-ai
BeagleBoard.org BeagleY-AI is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM67A, which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 cores for low-power, low-latency GPIO control.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-ai
---
Changes since v1:
- fixed incorrect vdd-3v3-sd-pins-default name
- updated hdmi VDD_1V2 regulator for production pcb
- switched device tree name from k3-j722s-beagley-ai to k3-am67a-beagley-ai
- removed cpsw_port2 node
- enable UHS support for MMCSD
--- arch/arm64/boot/dts/ti/Makefile | 1 + .../arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 369 ++++++++++++++++++ 2 files changed, 370 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
arch/arm64/boot/dts/ti/Makefile +1 -0
@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoC
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +369 -0
369 lines not on this page · raw message
Signature · 1 line
2.39.2
Nishanth Menon
maintainerRe: [PATCH v2 2/2] arm64: dts: ti: Add k3-am67a-beagley-ai
Quoted 10 lines · Robert Nelson
BeagleBoard.org BeagleY-AI is an easy to use, affordable open source hardware single board computer based on the Texas Instruments AM67A, which features a quad-core 64-bit Arm CPU subsystem, 2 general-purpose digital-signal-processors (DSP) and matrix-multiply-accelerators (MMA), GPU, vision and deep learning accelerators, and multiple Arm Cortex-R5 cores for low-power, low-latency GPIO control.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-ai
Quoted 8 lines
Signed-off-by Robert Nelson <[email protected]>CC Andrew Davis <[email protected]>CC Nishanth Menon <[email protected]>CC Jared McArthur <[email protected]>CC Jason Kridner <[email protected]>CC Deepak Khatri <[email protected]>CC Drew Fustini <[email protected]>---
A few cosmetic comments to fix up for the next rev:
Quoted 123 lines
Changes since v1:
- fixed incorrect vdd-3v3-sd-pins-default name
- updated hdmiVDD_1V2regulator for production pcb
- switched device tree name from k3-j722s-beagley-ai to k3-am67a-beagley-ai
- removedcpsw_port2node
- enable UHS support for MMCSD--- arch/arm64/boot/dts/ti/Makefile | 1 + .../arm64/boot/dts/ti/k3-am67a-beagley-ai.dts | 369 ++++++++++++++++++ 2 files changed, 370 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dtsarch/arm64/boot/dts/ti/Makefile +1
-0@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J722s SoC +dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb dtb-$(CONFIG_ARCH_K3) += k3-j722s-evm.dtb # Boards with J784s4 SoCarch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +93
-0@@ -0,0 +1,369 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * https://beagley-ai.org/ + * + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation + */ + +/dts-v1/; + +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j722s.dtsi" + +/ { + compatible = "beagle,am67a-beagley-ai", "ti,j722s"; + model = "BeagleBoard.org BeagleY-AI"; + + aliases { + serial0 = &wkup_uart0; + serial2 = &main_uart0; + mmc0 = &sdhci1; + }; + + chosen { + stdout-path = &main_uart0; + }; + + memory@80000000 { + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + device_type = "memory"; + bootph-pre-ram; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_tfa_ddr: tfa@9e780000 { + reg = <0x00 0x9e780000 0x00 0x80000>; + no-map; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + no-map; + }; + + wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + }; + + vsys_5v0: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + bootph-all; + }; + + vdd_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_5v0>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: regulator-mmc1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_3v3_sd_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&main_gpio1 50 GPIO_ACTIVE_HIGH>; + bootph-all; + }; + + vdd_sd_dv: regulator-TLV71033 { + compatible = "regulator-gpio";
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 103
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+ regulator-name = "tlv71033"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vsys_5v0>; + gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0>, + <3300000 0x1>;
you will need bootph-all; here.
Quoted 45 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +45
-0+ }; + + vsys_io_1v8: regulator-vsys-io-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_io_1v2: regulator-vsys-io-1v2 { + compatible = "regulator-fixed"; + regulator-name = "vsys_io_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&main_pmx0 { + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D23) I2C0_SCL */ + J722S_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (B22) I2C0_SDA */ + >; + bootph-all; + }; + + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01c8, PIN_INPUT, 0) /* (A22) UART0_RXD */ + J722S_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (B22) UART0_TXD */ + >; + bootph-all; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0244, PIN_OUTPUT, 7) /* (A24) MMC1_SDWP.GPIO1_49 */ + >; + bootph-all; + };
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 158
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+ + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x023c, PIN_INPUT, 0) /* (H22) MMC1_CMD */ + J722S_IOPAD(0x0234, PIN_OUTPUT, 0) /* (H24) MMC1_CLK */ + J722S_IOPAD(0x0230, PIN_INPUT, 0) /* (H23) MMC1_DAT0 */ + J722S_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H20) MMC1_DAT1 */ + J722S_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (J23) MMC1_DAT2 */ + J722S_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */ + J722S_IOPAD(0x0240, PIN_INPUT, 0) /* (B24) MMC1_SDCD */
I suggest using GPIO mode 7 here. (and see below):
J722S_IOPAD(0x0240, PIN_INPUT, 7) /* (B24) MMC1_SDCD */
you can optionally enable debounce as well if that is useful.
Quoted 38 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +38
-0+ >; + bootph-all; + }; + + mdio_pins_default: mdio-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */ + J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */ + J722S_IOPAD(0x0150, PIN_INPUT, 0) /* (AD27) RGMII1_RD1 */ + J722S_IOPAD(0x0154, PIN_INPUT, 0) /* (AE24) RGMII1_RD2 */ + J722S_IOPAD(0x0158, PIN_INPUT, 0) /* (AE26) RGMII1_RD3 */ + J722S_IOPAD(0x0148, PIN_INPUT, 0) /* (AE27) RGMII1_RXC */ + J722S_IOPAD(0x0144, PIN_INPUT, 0) /* (AD23) RGMII1_RX_CTL */ + J722S_IOPAD(0x0134, PIN_OUTPUT, 0) /* (AF27) RGMII1_TD0 */ + J722S_IOPAD(0x0138, PIN_OUTPUT, 0) /* (AE23) RGMII1_TD1 */ + J722S_IOPAD(0x013c, PIN_OUTPUT, 0) /* (AG25) RGMII1_TD2 */ + J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */ + J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */ + J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */ + >; + }; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x01f4, PIN_INPUT_PULLUP, 0) /* (B23) EXTINTn */ + >; + }; + + vdd_3v3_sd_pins_default: vdd-3v3-sd-default-pins { + pinctrl-single,pins = < + J722S_IOPAD(0x0254, PIN_OUTPUT, 7) /* (E25) USB0_DRVVBUS.GPIO1_50 */ + >;
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 206
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+ }; +}; + +&cpsw3g { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>, <&gbe_pmx_obsclk>; + + assigned-clocks = <&k3_clks 227 0>; + assigned-clock-parents = <&k3_clks 227 6>;
Here and elsewhere: status is last in the list. Please follow the recommendations in:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 212
Quoted 6 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +6
-0+}; + +&cpsw3g_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins_default>;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
Quoted 14 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +14
-0+ + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; + status = "okay"; +};
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 236
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+ +&main_gpio1 { + status = "okay"; +}; + +&main_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + status = "okay"; + bootph-all;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
Quoted 25 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +25
-0+}; + +&mcu_pmx0 { + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x02c, PIN_INPUT, 0) /* (C7) WKUP_UART0_CTSn */ + J722S_MCU_IOPAD(0x030, PIN_OUTPUT, 0) /* (C6) WKUP_UART0_RTSn */ + J722S_MCU_IOPAD(0x024, PIN_INPUT, 0) /* (D8) WKUP_UART0_RXD */ + J722S_MCU_IOPAD(0x028, PIN_OUTPUT, 0) /* (D7) WKUP_UART0_TXD */ + >; + bootph-all; + }; + + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x04c, PIN_INPUT_PULLUP, 0) /* (C7) WKUP_I2C0_SCL */ + J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */ + >; + bootph-all; + }; + + gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins { + pinctrl-single,pins = < + J722S_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (A10) MCU_SPI0_CS1.MCU_OBSCLK0 */
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 271
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+ >; + }; +}; + +&wkup_uart0 { + /* WKUP UART0 is used by Device Manager firmware */ + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + status = "reserved"; + bootph-all;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 279
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +8
-0+}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + bootph-all;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 282
Quoted 3 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +3
-0+ + tps65219: pmic@30 { + bootph-all;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
Quoted 76 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +76
-0+ compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vsys_5v0>; + buck2-supply = <&vsys_5v0>; + buck3-supply = <&vsys_5v0>; + ldo1-supply = <&vdd_3v3>; + ldo3-supply = <&vdd_3v3>; + ldo4-supply = <&vdd_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + system-power-controller; + ti,power-button; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + /* Regulator is left as is unused */ + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV5_SDIO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allow-bypass; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_PHY_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDDA_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; +
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts line 368
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +10
-0+&sdhci1 { + /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; + vqmmc-supply = <&vdd_sd_dv>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; + status = "okay"; + bootph-all;
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node
Also add:
cd-gpios = <&main_gpio1 48 GPIO_ACTIVE_LOW>;
cd-debounce-delay-ms = <100>;
ti,fails-without-test-cd;
With this, you will actually have runtime PM working properly for SD card while booting off some other interface (e.g. nvme or others) and card detect will work since GPIO based wake sequence will still be valid.
Quoted 4 lines
arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts new file +1
-0+};Signature · 1 line
2.39.2
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Quoted 34 lines · Robert Nelson
This board is based on ti,j722s family using the am67a variation.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-aiSigned-off-by Robert Nelson <[email protected]>CC Rob Herring <[email protected]>CC Andrew Davis <[email protected]>CC Nishanth Menon <[email protected]>CC Jared McArthur <[email protected]>CC Jason Kridner <[email protected]>CC Deepak Khatri <[email protected]>CC Drew Fustini <[email protected]>---
Changes since v1:
- switched to the TI model am67a over the family name j722s--- Documentation/devicetree/bindings/arm/ti/k3.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/arm/ti/k3.yaml +1
-1@@ -134,6 +134,7 @@ properties: - description: K3 J722S SoC and Boards items: - enum: + - beagle,am67a-beagley-ai - ti,j722s-evm - const: ti,j722s --
Quoted 2 lines
2.39.2
Rob, after discussions with TI, we changed the name of this board from beagle,j722s-beagley-ai to beagle,am67a-beagley-ai so i didn't apply your original ack from v1...
Regards
Signature · 2 lines
Robert Nelson https://rcn-ee.com/
Quoted 5 lines · Robert Nelson
This board is based on ti,j722s family using the am67a variation.
https://beagley-ai.org/
https://openbeagle.org/beagley-ai/beagley-ai
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline), work on fork of kernel (don't, instead use mainline) or you ignore some maintainers (really don't). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.
You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested.
Please kindly resend and include all necessary To/Cc entries.
Best regards,
Krzysztof