arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz
Subsystems (2)
PATCH 1/1 arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz
The am625 is capable of running at 1.4 GHz when VDD_CORE is increased from 0.75V to 0.85V. Increasing the voltage while the AM625 is running has not been validated by TI, so we provide an overlay so that people may choose to run at 1.4 GHz if they need the additional performance.
--- arch/arm64/boot/dts/ti/Makefile | 3 +++ .../k3-am625-phyboard-lyra-1-4-ghz-opp.dtso | 20 +++++++++++++++++++ 2 files changed, 23 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
arch/arm64/boot/dts/ti/Makefile +3 -0
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
@@ -106,6 +107,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-ov5640.dtbo k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \ k3-am625-beagleplay-csi2-tevi-ov5640.dtbo +k3-am625-phyboard-lyra-1-4-ghz-opp.dtbs := k3-am625-phyboard-lyra-rdk.dtb \ + k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \ k3-am62x-phyboard-lyra-gpio-fan.dtbo k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso new file +20 -0
@@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2024 PHYTEC America LLC + * Author: Nathan Morrisson <[email protected]> + */ + +/dts-v1/; +/plugin/; + +&vdd_core { + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; +}; + +&a53_opp_table { + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-supported-hw = <0x01 0x0004>; + }; +};
Signature · 1 line
2.25.1
Hi Nathan Morrisson,
Quoted 8 lines · Nathan Morrisson
The am625 is capable of running at 1.4 GHz when
VDD_COREis increased from 0.75V to 0.85V. Increasing the voltage while the AM625 is running has not been validated by TI, so we provide an overlay so that people may choose to run at 1.4 GHz if they need the additional performance.[...]
I have applied the following to branch ti-k3-dts-next on [1]. Thank you!
[1/1] arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz
commit: 7a5775a3da906dab059b8de60a2b88f6016cb4b8
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh