dt-bindings: Drop unnecessary quotes on keys
Subsystems (12)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: Drop unnecessary quotes on keys
The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
--- Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 ++++++------ .../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 7 +++++-- .../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +- .../devicetree/bindings/phy/brcm,sata-phy.yaml | 8 ++++---- .../devicetree/bindings/regulator/ti,tps62864.yaml | 2 +- .../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 6 +++--- Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml | 4 ++-- 7 files changed, 22 insertions(+), 19 deletions(-)
Documentation/devicetree/bindings/net/sff,sfp.yaml +6 -6
@@ -29,39 +29,39 @@ properties: allowable by a module in the slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - "mod-def0-gpios": + mod-def0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module presence input gpio signal, active (module absent) high. Must not be present for SFF modules - "los-gpios": + los-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high - "tx-fault-gpios": + tx-fault-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Module Transmitter Fault input gpio signal, active (fault condition) high - "tx-disable-gpios": + tx-disable-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Transmitter Disable output gpio signal, active (Tx disable) high - "rate-select0-gpios": + rate-select0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low - low Rx rate, high - high Rx rate Must not be present for SFF modules - "rate-select1-gpios": + rate-select1-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +5 -2
@@ -48,13 +48,16 @@ properties: interrupt-controller: description: Interrupt controller node for handling legacy PCI interrupts. type: object + additionalProperties: false + properties: "#address-cells": const: 0 + "#interrupt-cells": const: 1 - "interrupt-controller": true - additionalProperties: false + + interrupt-controller: true required: - reg
Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml +1 -1
@@ -84,7 +84,7 @@ properties: "#interrupt-cells": const: 1 - "interrupt-controller": true + interrupt-controller: true required: - "#address-cells"
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml +4 -4
@@ -59,14 +59,14 @@ patternProperties: "#phy-cells": const: 0 - "brcm,enable-ssc": + brcm,enable-ssc: $ref: /schemas/types.yaml#/definitions/flag description: | Use spread spectrum clocking (SSC) on this port This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". - "brcm,rxaeq-mode": + brcm,rxaeq-mode: $ref: /schemas/types.yaml#/definitions/string description: String that indicates the desired RX equalizer mode.
@@ -75,7 +75,7 @@ patternProperties: - auto - manual - "brcm,rxaeq-value": + brcm,rxaeq-value: $ref: /schemas/types.yaml#/definitions/uint32 description: | When 'brcm,rxaeq-mode' is set to "manual", provides the RX
@@ -83,7 +83,7 @@ patternProperties: minimum: 0 maximum: 63 - "brcm,tx-amplitude-millivolt": + brcm,tx-amplitude-millivolt: description: | Transmit amplitude voltage in millivolt. $ref: /schemas/types.yaml#/definitions/uint32
Documentation/devicetree/bindings/regulator/ti,tps62864.yaml +1 -1
@@ -24,7 +24,7 @@ properties: type: object properties: - "SW": + SW: type: object $ref: regulator.yaml# unevaluatedProperties: false
Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml +3 -3
@@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] - "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] + nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] examples: - |
Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml +2 -2
@@ -33,13 +33,13 @@ properties: reg: maxItems: 1 - 'ibm,#dma-address-cells': + ibm,#dma-address-cells: description: number of cells that are used to encode the physical address field of dma-window properties $ref: /schemas/types.yaml#/definitions/uint32-array - 'ibm,#dma-size-cells': + ibm,#dma-size-cells: description: number of cells that are used to encode the size field of dma-window properties
Signature · 1 line
2.43.0
Quoted 8 lines · Rob Herring (Arm)
The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Signed-off-by Rob Herring (Arm) <[email protected]>---
Best regards,
Krzysztof
Quoted 3 lines · Rob Herring (Arm)
The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check.
Quoted 7 lines · Rob Herring (Arm)
The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Signed-off-by Rob Herring (Arm) <[email protected]>
Quoted 9 lines
--- Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 ++++++------ .../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 7 +++++-- .../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +- .../devicetree/bindings/phy/brcm,sata-phy.yaml | 8 ++++---- .../devicetree/bindings/regulator/ti,tps62864.yaml | 2 +- .../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 6 +++--- Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml | 4 ++-- 7 files changed, 22 insertions(+), 19 deletions(-)
Quoted 7 lines · Rob Herring (Arm)
The yamllint quoted-strings check wasn't checking keys for quotes, but support for checking keys was added in 1.34 release. Fix all the errors found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Signed-off-by Rob Herring (Arm) <[email protected]>
Quoted 10 lines
--- Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 ++++++------ .../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 7 +++++-- .../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +- .../devicetree/bindings/phy/brcm,sata-phy.yaml | 8 ++++---- .../devicetree/bindings/regulator/ti,tps62864.yaml | 2 +- .../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 6 +++--- Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml | 4 ++-- 7 files changed, 22 insertions(+), 19 deletions(-)
Applied, thanks!