cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
Dave Jiang
maintainerPATCH 1/1 cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
Robert reported the following when booting a CXL host with Restricted CXL Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device [ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]
... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8
The iterator to walk the PCIe path did not account for RCH topology. However RCH does not support hotplug and the memory exported by the Restricted CXL Device (RCD) should be covered by HMAT and therefore no access_coordinate is needed. Add check to see if the endpoint device is RCD and skip calculation.
Also add a call to cxl_endpoint_get_perf_coordinates() in cxl_test in order to exercise the topology iterator. The dev_is_pci() check added is to help with this test and should be harmless for normal operation.
---
Hi Robert,
Can you please try this patch and see if it addresses the issue you saw on your RCH platform? Thanks!
drivers/cxl/core/port.c | 15 ++++++++++++++- tools/testing/cxl/test/cxl.c | 3 +++ 2 files changed, 17 insertions(+), 1 deletion(-)
drivers/cxl/core/port.c +14 -1
@@ -2184,6 +2184,7 @@ static bool parent_port_is_cxl_root(struct cxl_port *port)int cxl_endpoint_get_perf_coordinates (struct cxl_port *port,struct access_coordinate *coord) { +struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct access_coordinate c[] = { { .read_bandwidth =UINT_MAX ,
@@ -2197,12 +2198,20 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,struct cxl_port *iter = port;struct cxl_dport *dport;struct pci_dev *pdev; +struct device *dev;unsigned int bw;bool is_cxl_root;if (!is_cxl_endpoint (port))return -EINVAL ; +/* +* Skip calculation for RCD. Expectation is HMAT already covers RCD case +* since RCH does not support hotplug. +*/ +if (cxlmd->cxlds->rcd) +return 0 ; +/* * Exit the loop when the parent port of the current iter port is cxl * root. The iterative loop starts at the endpoint and gathers the
@@ -2232,8 +2241,12 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,return -EINVAL ;cxl_coordinates_combine (c, c, dport->coord); + dev = port->uport_dev->parent; +if (!dev_is_pci (dev)) +return -ENODEV ; +/* Get the calculated PCI paths bandwidth */ - pdev =to_pci_dev (port->uport_dev->parent); + pdev =to_pci_dev (dev); bw =pcie_bandwidth_available (pdev,NULL ,NULL ,NULL );if (bw ==0 )return -ENXIO ;
tools/testing/cxl/test/cxl.c +3 -0
@@ -1001,6 +1001,7 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct cxl_dev_state *cxlds = cxlmd->cxlds;struct cxl_memdev_state *mds =to_cxl_memdev_state (cxlds); +struct access_coordinate ep_c[ACCESS_COORDINATE_MAX ];struct range pmem_range = { .start = cxlds->pmem_res.start, .end = cxlds->pmem_res.end,
@@ -1020,6 +1021,8 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)dpa_perf_setup (port, &pmem_range, &mds->pmem_perf);cxl_memdev_update_perf (cxlmd); + +cxl_endpoint_get_perf_coordinates (port, ep_c); }static struct cxl_mock_ops cxl_mock_ops = {
Signature · 1 line
2.44.0
Quoted 23 lines · Dave Jiang
Robert reported the following when booting a CXL host with Restricted CXL Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device [ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8The iterator to walk the PCIe path did not account for RCH topology. However RCH does not support hotplug and the memory exported by the Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinateis needed. Add check to see if the endpoint device is RCD and skip calculation.Also add a call to
cxl_endpoint_get_perf_coordinates()incxl_testin order to exercise the topology iterator. Thedev_is_pci()check added is to help with this test and should be harmless for normal operation.Reported-by Robert Richter <[email protected]>Fixes 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")Signed-off-by Dave Jiang <[email protected]>
Quoted 5 lines
---
Hi Robert,
Can you please try this patch and see if it addresses the issue you saw on your RCH platform? Thanks!
Definitely wait for that test result, but as for the patch and the approach it looks good to me. It matches other RCH-topology-walk skips like the one in devm_cxl_enumerate_ports().
Now, that said, if someone can think of why the driver needs to do dynamic performance enumeration for RCH (i.e. a platform BIOS does not populate HMAT), they should speak up now.
Quoted 3 lines · Dan Williams
Now, that said, if someone can think of why the driver needs to do dynamic performance enumeration for RCH (i.e. a platform BIOS does not populate HMAT), they should speak up now.
I wouldn't stick with that forever as you never know, but for now disabling it for RCDs looks good to me to fix this, esp. considering we are already at -rc6.
E.g I found in cxl-3.1, 9.11.6 RCD Discovery:
"""
In the future, a
CXL-aware OS may extract this information directly from the device via Table Access DOE.
"""
Thanks,
-Robert
Quoted 4 lines · On Mon, 29 Apr 2024 14:23:16 +0200 Robert Richter <[email protected]> wrote:
Quoted 3 lines · Dan Williams
Now, that said, if someone can think of why the driver needs to do dynamic performance enumeration for RCH (i.e. a platform BIOS does not populate HMAT), they should speak up now.
It would have to selectively populate HMAT as we'd need the Generic Port distances anyway. That is an odd corner indeed.
Agreed on disabling it until someone shouts.
Quoted 16 lines
I wouldn't stick with that forever as you never know, but for now disabling it for RCDs looks good to me to fix this, esp. considering we are already at -rc6.
E.g I found in cxl-3.1, 9.11.6 RCD Discovery:
"""
In the future, a
CXL-aware OS may extract this information directly from the device via Table Access DOE.
"""Thanks,
-Robert
Quoted 15 lines · Dave Jiang
Robert reported the following when booting a CXL host with Restricted CXL Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device [ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8The iterator to walk the PCIe path did not account for RCH topology. However RCH does not support hotplug and the memory exported by the Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinateis needed. Add check to see if the endpoint device is RCD and skip calculation.
Quoted 8 lines
Also add a call to
cxl_endpoint_get_perf_coordinates()incxl_testin order to exercise the topology iterator. Thedev_is_pci()check added is to help with this test and should be harmless for normal operation.Reported-by Robert Richter <[email protected]>Fixes 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")Signed-off-by Dave Jiang <[email protected]>
This patch fixes the issue.
But see below for a question...
Quoted 70 lines
---
Hi Robert,
Can you please try this patch and see if it addresses the issue you saw on your RCH platform? Thanks!drivers/cxl/core/port.c | 15 ++++++++++++++- tools/testing/cxl/test/cxl.c | 3 +++ 2 files changed, 17 insertions(+), 1 deletion(-)drivers/cxl/core/port.c +14
-1@@ -2184,6 +2184,7 @@ static bool parent_port_is_cxl_root(struct cxl_port *port)int cxl_endpoint_get_perf_coordinates (struct cxl_port *port,struct access_coordinate *coord) { +struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct access_coordinate c[] = { { .read_bandwidth =UINT_MAX ,@@ -2197,12 +2198,20 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,struct cxl_port *iter = port;struct cxl_dport *dport;struct pci_dev *pdev; +struct device *dev;unsigned int bw;bool is_cxl_root;if (!is_cxl_endpoint (port))return -EINVAL ; +/* +* Skip calculation for RCD. Expectation is HMAT already covers RCD case +* since RCH does not support hotplug. +*/ +if (cxlmd->cxlds->rcd) +return 0 ; +/* * Exit the loop when the parent port of the current iter port is cxl * root. The iterative loop starts at the endpoint and gathers the @@ -2232,8 +2241,12 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,return -EINVAL ;cxl_coordinates_combine (c, c, dport->coord); + dev = port->uport_dev->parent; +if (!dev_is_pci (dev)) +return -ENODEV ; +/* Get the calculated PCI paths bandwidth */ - pdev =to_pci_dev (port->uport_dev->parent); + pdev =to_pci_dev (dev); bw =pcie_bandwidth_available (pdev,NULL ,NULL ,NULL );if (bw ==0 )return -ENXIO ;tools/testing/cxl/test/cxl.c +1
-0@@ -1001,6 +1001,7 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct cxl_dev_state *cxlds = cxlmd->cxlds;struct cxl_memdev_state *mds =to_cxl_memdev_state (cxlds); +struct access_coordinate ep_c[ACCESS_COORDINATE_MAX ];struct range pmem_range = { .start = cxlds->pmem_res.start, .end = cxlds->pmem_res.end,
tools/testing/cxl/test/cxl.c static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port) · line 1025
Quoted 5 lines
tools/testing/cxl/test/cxl.c +2
-0@@ -1020,6 +1021,8 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)dpa_perf_setup (port, &pmem_range, &mds->pmem_perf);cxl_memdev_update_perf (cxlmd); + +cxl_endpoint_get_perf_coordinates (port, ep_c);
I don't see what this is for as ep_c is unused later? The only reason is for error checking to see if that throws some kernel message in the logs but return code is unused.
Thanks,
-Robert
Quoted 6 lines
tools/testing/cxl/test/cxl.c +0
-0}static struct cxl_mock_ops cxl_mock_ops = {Signature · 1 line
2.44.0
Dave Jiang
maintainerQuoted 25 lines · Robert Richter
Quoted 15 lines · Dave Jiang
Robert reported the following when booting a CXL host with Restricted CXL Host (RCH) topology:
[ 39.815379] cxl_acpi ACPI0017:00: not a cxl_port device [ 39.827123] WARNING: CPU: 46 PID: 1754 at drivers/cxl/core/port.c:592 to_cxl_port+0x56/0x70 [cxl_core]... plus some related subsequent NULL pointer dereference:
[ 40.718708] BUG: kernel NULL pointer dereference, address: 00000000000002d8The iterator to walk the PCIe path did not account for RCH topology. However RCH does not support hotplug and the memory exported by the Restricted CXL Device (RCD) should be covered by HMAT and therefore no
access_coordinateis needed. Add check to see if the endpoint device is RCD and skip calculation.Quoted 8 lines
Also add a call to
cxl_endpoint_get_perf_coordinates()incxl_testin order to exercise the topology iterator. Thedev_is_pci()check added is to help with this test and should be harmless for normal operation.Reported-by Robert Richter <[email protected]>Fixes 592780b8391f ("cxl: Fix retrieving of access_coordinates in PCIe path")Signed-off-by Dave Jiang <[email protected]>
Quoted 4 lines
This patch fixes the issue.
Tested-by Robert Richter <[email protected]>Reviewed-by Robert Richter <[email protected]>
Thank you Robert! I'll get this queued for rc7.
Quoted 75 lines
But see below for a question...
Quoted 72 lines
---
Hi Robert,
Can you please try this patch and see if it addresses the issue you saw on your RCH platform? Thanks!drivers/cxl/core/port.c | 15 ++++++++++++++- tools/testing/cxl/test/cxl.c | 3 +++ 2 files changed, 17 insertions(+), 1 deletion(-)drivers/cxl/core/port.c +14
-1@@ -2184,6 +2184,7 @@ static bool parent_port_is_cxl_root(struct cxl_port *port)int cxl_endpoint_get_perf_coordinates (struct cxl_port *port,struct access_coordinate *coord) { +struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct access_coordinate c[] = { { .read_bandwidth =UINT_MAX ,@@ -2197,12 +2198,20 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,struct cxl_port *iter = port;struct cxl_dport *dport;struct pci_dev *pdev; +struct device *dev;unsigned int bw;bool is_cxl_root;if (!is_cxl_endpoint (port))return -EINVAL ; +/* +* Skip calculation for RCD. Expectation is HMAT already covers RCD case +* since RCH does not support hotplug. +*/ +if (cxlmd->cxlds->rcd) +return 0 ; +/* * Exit the loop when the parent port of the current iter port is cxl * root. The iterative loop starts at the endpoint and gathers the @@ -2232,8 +2241,12 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port,return -EINVAL ;cxl_coordinates_combine (c, c, dport->coord); + dev = port->uport_dev->parent; +if (!dev_is_pci (dev)) +return -ENODEV ; +/* Get the calculated PCI paths bandwidth */ - pdev =to_pci_dev (port->uport_dev->parent); + pdev =to_pci_dev (dev); bw =pcie_bandwidth_available (pdev,NULL ,NULL ,NULL );if (bw ==0 )return -ENXIO ;tools/testing/cxl/test/cxl.c +1
-0@@ -1001,6 +1001,7 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)struct cxl_memdev *cxlmd =to_cxl_memdev (port->uport_dev);struct cxl_dev_state *cxlds = cxlmd->cxlds;struct cxl_memdev_state *mds =to_cxl_memdev_state (cxlds); +struct access_coordinate ep_c[ACCESS_COORDINATE_MAX ];struct range pmem_range = { .start = cxlds->pmem_res.start, .end = cxlds->pmem_res.end,@@ -1020,6 +1021,8 @@ static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port)dpa_perf_setup (port, &pmem_range, &mds->pmem_perf);
Quoted 7 lines
tools/testing/cxl/test/cxl.c static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port) · line 1025
Quoted 3 lines
tools/testing/cxl/test/cxl.c +2
-0cxl_memdev_update_perf (cxlmd); + +cxl_endpoint_get_perf_coordinates (port, ep_c);I don't see what this is for as
ep_cis unused later? The only reason is for error checking to see if that throws some kernel message in the logs but return code is unused.
Right. The results are thrown away. The call is there to specifically test the iterator and making sure we don't crash or fail. It has no other purpose. I looked into plumbing this function for usage in cxl-test but found it not possible to override the PCI API function that retrieves bandwidth. So for now we'll just have it just test the topology iterator. I'll add a comment.
Quoted 11 lines
Thanks,
-Robert
Quoted 6 lines
tools/testing/cxl/test/cxl.c +0
-0}static struct cxl_mock_ops cxl_mock_ops = {Signature · 1 line
2.44.0