FAILED: patch "[PATCH] phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6" failed to apply to 6.8-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.8-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.8.y
git checkout FETCH_HEAD
git cherry-pick -x 025a6f7448f7bb5f4fceb62498ee33d89ae266bb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2024042918-jet-harmonica-e767@gregkh' --subject-prefix 'PATCH 6.8.y' HEAD^..
Possible dependencies:
025a6f7448f7 ("phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6") ef643d55fdeb ("phy: qcom: qmp: split DP PHY registers to separate headers")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 025a6f7448f7bb5f4fceb62498ee33d89ae266bb Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Mon, 8 Apr 2024 11:30:23 +0200
Subject: [PATCH] phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
Commit 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") fixed a regression introduced in 6.5 by making sure that the correct offset is used for the DP_PHY_VCO_DIV register on v3 hardware.
Unfortunately, that fix instead broke DisplayPort on v5_5nm and v6 hardware as it failed to add the corresponding offsets also to those register tables.
drivers/phy/qualcomm/phy-qcom-qmp-combo.c +2 -0
@@ -153,6 +153,7 @@ static const unsigned int qmp_v5_5nm_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_COM_BIAS_EN_CLKBUFLR_EN] = QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, [QPHY_DP_PHY_STATUS] = QSERDES_V5_DP_PHY_STATUS, + [QPHY_DP_PHY_VCO_DIV] = QSERDES_V5_DP_PHY_VCO_DIV, [QPHY_TX_TX_POL_INV] = QSERDES_V5_5NM_TX_TX_POL_INV, [QPHY_TX_TX_DRV_LVL] = QSERDES_V5_5NM_TX_TX_DRV_LVL,
@@ -177,6 +178,7 @@ static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_COM_BIAS_EN_CLKBUFLR_EN] = QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, [QPHY_DP_PHY_STATUS] = QSERDES_V6_DP_PHY_STATUS, + [QPHY_DP_PHY_VCO_DIV] = QSERDES_V6_DP_PHY_VCO_DIV, [QPHY_TX_TX_POL_INV] = QSERDES_V6_TX_TX_POL_INV, [QPHY_TX_TX_DRV_LVL] = QSERDES_V6_TX_TX_DRV_LVL,
drivers/phy/qualcomm/phy-qcom-qmp-dp-phy-v5.h +1 -0
@@ -7,6 +7,7 @@#define QCOM_PHY_QMP_DP_PHY_V5_H_ /* Only for QMP V5 PHY - DP PHY registers */ +#define QSERDES_V5_DP_PHY_VCO_DIV 0x070#define QSERDES_V5_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8#define QSERDES_V5_DP_PHY_STATUS 0x0dc
drivers/phy/qualcomm/phy-qcom-qmp-dp-phy-v6.h +1 -0
@@ -7,6 +7,7 @@#define QCOM_PHY_QMP_DP_PHY_V6_H_ /* Only for QMP V6 PHY - DP PHY registers */ +#define QSERDES_V6_DP_PHY_VCO_DIV 0x070#define QSERDES_V6_DP_PHY_AUX_INTERRUPT_STATUS 0x0e0#define QSERDES_V6_DP_PHY_STATUS 0x0e4
PATCH 1/1 phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
From: Johan Hovold <[email protected]>
Commit 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3") fixed a regression introduced in 6.5 by making sure that the correct offset is used for the DP_PHY_VCO_DIV register on v3 hardware.
Unfortunately, that fix instead broke DisplayPort on v5_5nm and v6 hardware as it failed to add the corresponding offsets also to those register tables.
--- drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 ++ drivers/phy/qualcomm/phy-qcom-qmp.h | 2 ++ 2 files changed, 4 insertions(+)
drivers/phy/qualcomm/phy-qcom-qmp-combo.c +2 -0
@@ -188,6 +188,7 @@ static const unsigned int qmp_v5_5nm_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_COM_BIAS_EN_CLKBUFLR_EN] = QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, [QPHY_DP_PHY_STATUS] = QSERDES_V5_DP_PHY_STATUS, + [QPHY_DP_PHY_VCO_DIV] = QSERDES_V5_DP_PHY_VCO_DIV, [QPHY_TX_TX_POL_INV] = QSERDES_V5_5NM_TX_TX_POL_INV, [QPHY_TX_TX_DRV_LVL] = QSERDES_V5_5NM_TX_TX_DRV_LVL,
@@ -212,6 +213,7 @@ static const unsigned int qmp_v6_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_COM_BIAS_EN_CLKBUFLR_EN] = QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, [QPHY_DP_PHY_STATUS] = QSERDES_V6_DP_PHY_STATUS, + [QPHY_DP_PHY_VCO_DIV] = QSERDES_V6_DP_PHY_VCO_DIV, [QPHY_TX_TX_POL_INV] = QSERDES_V6_TX_TX_POL_INV, [QPHY_TX_TX_DRV_LVL] = QSERDES_V6_TX_TX_DRV_LVL,
drivers/phy/qualcomm/phy-qcom-qmp.h +2 -0
@@ -132,9 +132,11 @@#define QSERDES_V4_DP_PHY_AUX_INTERRUPT_STATUS 0x0d8#define QSERDES_V4_DP_PHY_STATUS 0x0dc +#define QSERDES_V5_DP_PHY_VCO_DIV 0x070#define QSERDES_V5_DP_PHY_STATUS 0x0dc/* Only for QMP V6 PHY - DP PHY registers */ +#define QSERDES_V6_DP_PHY_VCO_DIV 0x070#define QSERDES_V6_DP_PHY_AUX_INTERRUPT_STATUS 0x0e0#define QSERDES_V6_DP_PHY_STATUS 0x0e4
Signature · 1 line
https://chromeos.dev
Greg KH
maintainerRe: [PATCH 6.8.y] phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
Quoted 10 lines · Stephen Boyd
From: Johan Hovold <[email protected]>
Commit
5abed58a8bde("phy: qcom: qmp-combo: Fix VCO div offset on v3") fixed a regression introduced in 6.5 by making sure that the correct offset is used for theDP_PHY_VCO_DIVregister on v3 hardware.Unfortunately, that fix instead broke DisplayPort on
v5_5nmand v6 hardware as it failed to add the corresponding offsets also to those register tables.
Quoted 14 lines
Fixes 815891eee668 ("phy: qcom-qmp-combo: Introduce orientation variable")Fixes 5abed58a8bde ("phy: qcom: qmp-combo: Fix VCO div offset on v3")Cc [email protected] # 6.5: 5abed58a8bdeCc Stephen Boyd <[email protected]>Cc Abhinav Kumar <[email protected]>Cc Dmitry Baryshkov <[email protected]>Signed-off-by Johan Hovold <[email protected]>Reviewed-by Dmitry Baryshkov <[email protected]>Reviewed-by Stephen Boyd <[email protected]>Reviewed-by Abhinav Kumar <[email protected]>Signed-off-by Vinod Koul <[email protected]>(cherry picked from commit 025a6f7448f7bb5f4fceb62498ee33d89ae266bb)Signed-off-by Stephen Boyd <[email protected]>
Both now queued up, thanks.
greg k-h