Skip to contentSkip to conversation

x86/cpufeatures: Automatically generate required and disabled feature masks

PATCH RESEND Superseded Xin Li (Intel) 3 participants 9 messages May 9, 2024 – Jun 22, 2024

Subsystems (5)

v1 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

cover x86/cpufeatures: Automatically generate required and disabled feature masks

This is a rebase and resend of: https://lore.kernel.org/lkml/[email protected]/.

The x86 build process first generates required and disabled feature masks based on current build config, and then uses these generated masks to compile the source code. When a CPU feature is not enabled in a build config, e.g., when CONFIG_X86_FRED=n, its feature disable flag, i.e., DISABLE_FRED, needs to be properly defined and added to a specific disabled CPU features mask in <asm/disabled-features.h>, as the following patch does:
https://lore.kernel.org/all/[email protected]/.
As a result, the FRED feature bit is surely cleared in the generated kernel binary when CONFIG_X86_FRED=n.

Recently there is another case to repeat the same exercise for the AMD SEV-SNP CPU feature:
https://lore.kernel.org/all/[email protected]/.
https://lore.kernel.org/all/[email protected]/.

It was one thing when there were four of CPU feature masks, but with over 20 it is going to cause mistakes, e.g.,
https://lore.kernel.org/lkml/[email protected]/.

We want to eliminate the stupidly repeated exercise to manually assign features to CPU feature words through introducing an AWK script to automatically generate a header with required and disabled CPU feature masks based on current build config, and this patch set does that.

H. Peter Anvin (Intel) (2):
x86/cpufeatures: Add {required,disabled} feature configs x86/cpufeatures: Generate a feature mask header based on build config

Xin Li (Intel) (1):
x86/cpufeatures: Remove {disabled,required}-features.h

 arch/x86/Kconfig                              |   4 +-
 arch/x86/Kconfig.cpu                          |  16 +-
 arch/x86/Kconfig.cpufeatures                  | 153 +++++++++++++++++
 arch/x86/Makefile                             |  17 +-
 arch/x86/boot/cpucheck.c                      |   3 +-
 arch/x86/boot/cpuflags.c                      |   1 -
 arch/x86/boot/mkcpustr.c                      |   3 +-
 arch/x86/include/asm/Kbuild                   |   1 +
 arch/x86/include/asm/asm-prototypes.h         |   2 +-
 arch/x86/include/asm/atomic64_32.h            |   2 +-
 arch/x86/include/asm/bitops.h                 |   4 +-
 arch/x86/include/asm/cmpxchg_32.h             |   2 +-
 arch/x86/include/asm/cpufeature.h             |   1 +
 arch/x86/include/asm/cpufeatures.h            |   8 -
 arch/x86/include/asm/disabled-features.h      | 161 ------------------
 arch/x86/include/asm/required-features.h      | 105 ------------
 arch/x86/kernel/verify_cpu.S                  |   1 +
 arch/x86/lib/Makefile                         |   2 +-
 arch/x86/lib/cmpxchg8b_emu.S                  |   2 +-
 arch/x86/tools/featuremasks.awk               | 108 ++++++++++++
 lib/atomic64_test.c                           |   2 +-
 tools/arch/x86/include/asm/cpufeatures.h      |   8 -
 .../arch/x86/include/asm/disabled-features.h  | 161 ------------------
 .../arch/x86/include/asm/required-features.h  | 105 ------------
 tools/perf/check-headers.sh                   |   2 -
 25 files changed, 306 insertions(+), 568 deletions(-)
 create mode 100644 arch/x86/Kconfig.cpufeatures
 delete mode 100644 arch/x86/include/asm/disabled-features.h
 delete mode 100644 arch/x86/include/asm/required-features.h
 create mode 100755 arch/x86/tools/featuremasks.awk
 delete mode 100644 tools/arch/x86/include/asm/disabled-features.h
 delete mode 100644 tools/arch/x86/include/asm/required-features.h

base-commit: c064e5cb8336a5ee3471cc6a376cc19e19aa85de

Signature · 1 line
2.45.0
#1 lore raw

PATCH RESEND 1/3 x86/cpufeatures: Add {required,disabled} feature configs

From: "H. Peter Anvin (Intel)" <[email protected]>

Required and disabled feature masks completely rely on build configs, i.e., once a build config is fixed, so are the feature masks. To prepare for auto-generating a header with required and disabled feature masks based on a build config, add feature Kconfig items:
- X86_REQUIRED_FEATURE_x
- X86_DISABLED_FEATURE_x
each of which may be set to "y" if and only if its preconditions from current build config are met.

X86_CMPXCHG64 and X86_CMOV are required features, thus rename them to X86_REQUIRED_FEATURE_CX8 and X86_REQUIRED_FEATURE_CMOV.

---
 arch/x86/Kconfig                              |   4 +-
 arch/x86/Kconfig.cpu                          |  16 +-
 arch/x86/Kconfig.cpufeatures                  | 153 ++++++++++++++++++
 arch/x86/include/asm/asm-prototypes.h         |   2 +-
 arch/x86/include/asm/atomic64_32.h            |   2 +-
 arch/x86/include/asm/bitops.h                 |   4 +-
 arch/x86/include/asm/cmpxchg_32.h             |   2 +-
 arch/x86/include/asm/required-features.h      |   4 +-
 arch/x86/lib/Makefile                         |   2 +-
 arch/x86/lib/cmpxchg8b_emu.S                  |   2 +-
 lib/atomic64_test.c                           |   2 +-
 .../arch/x86/include/asm/required-features.h  |   4 +-
 12 files changed, 181 insertions(+), 16 deletions(-)
 create mode 100644 arch/x86/Kconfig.cpufeatures
arch/x86/Kconfig +3 -1
index 9d16fee6bdb8..9bbbc9224578 100644
@@ -121,7 +121,7 @@ config X86
 	select ARCH_SUPPORTS_LTO_CLANG
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
 	select ARCH_USE_BUILTIN_BSWAP
-	select ARCH_USE_CMPXCHG_LOCKREF		if X86_CMPXCHG64
+	select ARCH_USE_CMPXCHG_LOCKREF		if X86_REQUIRED_FEATURE_CX8
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
@@ -3081,4 +3081,6 @@ config HAVE_ATOMIC_IOMAP
 
 source "arch/x86/kvm/Kconfig"
 
+source "arch/x86/Kconfig.cpufeatures"
+
 source "arch/x86/Kconfig.assembler"
arch/x86/Kconfig.cpu +13 -3
index 2a7279d80460..719302d37053 100644
@@ -358,6 +358,10 @@ config X86_P6_NOP
 	depends on X86_64
 	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
+config X86_REQUIRED_FEATURE_NOPL
+	def_bool y
+	depends on X86_64 || X86_P6_NOP
+
 config X86_TSC
 	def_bool y
 	depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64
@@ -366,21 +370,27 @@ config X86_HAVE_PAE
 	def_bool y
 	depends on MCRUSOE || MEFFICEON || MCYRIXIII || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC7 || MCORE2 || MATOM || X86_64
 
-config X86_CMPXCHG64
+config X86_REQUIRED_FEATURE_CX8
 	def_bool y
 	depends on X86_HAVE_PAE || M586TSC || M586MMX || MK6 || MK7
 
 # this should be set for all -march=.. options where the compiler
 # generates cmov.
-config X86_CMOV
+config X86_REQUIRED_FEATURE_CMOV
 	def_bool y
 	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
 
+# this should be set for all -march= options where the compiler
+# generates movbe.
+config X86_REQUIRED_FEATURE_MOVBE
+	def_bool y
+	depends on MATOM
+
 config X86_MINIMUM_CPU_FAMILY
 	int
 	default "64" if X86_64
 	default "6" if X86_32 && (MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MEFFICEON || MATOM || MCORE2 || MK7 || MK8)
-	default "5" if X86_32 && X86_CMPXCHG64
+	default "5" if X86_32 && X86_REQUIRED_FEATURE_CX8
 	default "4"
 
 config X86_DEBUGCTLMSR
arch/x86/Kconfig.cpufeatures new file +153 -0

153 lines not on this page · raw message

arch/x86/include/asm/asm-prototypes.h +1 -1
index 25466c4d2134..7fbb52143b13 100644
@@ -16,7 +16,7 @@
 #include <asm/gsseg.h>
 #include <asm/nospec-branch.h>
 
-#ifndef CONFIG_X86_CMPXCHG64
+#ifndef CONFIG_X86_REQUIRED_FEATURE_CX8
 extern void cmpxchg8b_emu(void);
 #endif
 
arch/x86/include/asm/atomic64_32.h +1 -1
index 8db2ec4d6cda..f3438f8709bb 100644
@@ -48,7 +48,7 @@ static __always_inline s64 arch_atomic64_read_nonatomic(const atomic64_t *v)
 	ATOMIC64_EXPORT(atomic64_##sym)
 #endif
 
-#ifdef CONFIG_X86_CMPXCHG64
+#ifdef CONFIG_X86_REQUIRED_FEATURE_CX8
 #define __alternative_atomic64(f, g, out, in...) \
 	asm volatile("call %c[func]" \
 		     : out : [func] "i" (atomic64_##g##_cx8), ## in)
arch/x86/include/asm/bitops.h +2 -2
index 990eb686ca67..e3e69dca8edb 100644
@@ -321,7 +321,7 @@ static __always_inline int variable_ffs(int x)
 	asm("bsfl %1,%0"
 	    : "=r" (r)
 	    : "rm" (x), "0" (-1));
-#elif defined(CONFIG_X86_CMOV)
+#elif defined(CONFIG_X86_REQUIRED_FEATURE_CMOV)
 	asm("bsfl %1,%0\n\t"
 	    "cmovzl %2,%0"
 	    : "=&r" (r) : "rm" (x), "r" (-1));
@@ -378,7 +378,7 @@ static __always_inline int fls(unsigned int x)
 	asm("bsrl %1,%0"
 	    : "=r" (r)
 	    : "rm" (x), "0" (-1));
-#elif defined(CONFIG_X86_CMOV)
+#elif defined(CONFIG_X86_REQUIRED_FEATURE_CMOV)
 	asm("bsrl %1,%0\n\t"
 	    "cmovzl %2,%0"
 	    : "=&r" (r) : "rm" (x), "rm" (-1));
arch/x86/include/asm/cmpxchg_32.h +1 -1
index ed2797f132ce..2d875a8dbbb2 100644
@@ -69,7 +69,7 @@ static __always_inline bool __try_cmpxchg64_local(volatile u64 *ptr, u64 *oldp,
 	return __arch_try_cmpxchg64(ptr, oldp, new,);
 }
 
-#ifdef CONFIG_X86_CMPXCHG64
+#ifdef CONFIG_X86_REQUIRED_FEATURE_CX8
 
 #define arch_cmpxchg64 __cmpxchg64
 
arch/x86/include/asm/required-features.h +2 -2
index e9187ddd3d1f..cef8104c103c 100644
@@ -23,13 +23,13 @@
 # define NEED_PAE	0
 #endif
 
-#ifdef CONFIG_X86_CMPXCHG64
+#ifdef CONFIG_X86_REQUIRED_FEATURE_CX8
 # define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
 #else
 # define NEED_CX8	0
 #endif
 
-#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_REQUIRED_FEATURE_CMOV) || defined(CONFIG_X86_64)
 # define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
 #else
 # define NEED_CMOV	0
arch/x86/lib/Makefile +1 -1
index 6da73513f026..6bf720cabef5 100644
@@ -49,7 +49,7 @@ ifeq ($(CONFIG_X86_32),y)
         lib-y += string_32.o
         lib-y += memmove_32.o
         lib-y += cmpxchg8b_emu.o
-ifneq ($(CONFIG_X86_CMPXCHG64),y)
+ifneq ($(CONFIG_X86_REQUIRED_FEATURE_CX8),y)
         lib-y += atomic64_386_32.o
 endif
 else
arch/x86/lib/cmpxchg8b_emu.S +1 -1
index 1c96be769adc..4bc06bd1aee1 100644
@@ -7,7 +7,7 @@
 
 .text
 
-#ifndef CONFIG_X86_CMPXCHG64
+#ifndef CONFIG_X86_REQUIRED_FEATURE_CX8
 
 /*
  * Emulate 'cmpxchg8b (%esi)' on UP
lib/atomic64_test.c +1 -1
index d9d170238165..e68bde45b962 100644
@@ -254,7 +254,7 @@ static __init int test_atomics_init(void)
 	pr_info("passed for %s platform %s CX8 and %s SSE\n",
 #ifdef CONFIG_X86_64
 		"x86-64",
-#elif defined(CONFIG_X86_CMPXCHG64)
+#elif defined(CONFIG_X86_REQUIRED_FEATURE_CX8)
 		"i586+",
 #else
 		"i386+",
tools/arch/x86/include/asm/required-features.h +2 -2
index e9187ddd3d1f..cef8104c103c 100644
@@ -23,13 +23,13 @@
 # define NEED_PAE	0
 #endif
 
-#ifdef CONFIG_X86_CMPXCHG64
+#ifdef CONFIG_X86_REQUIRED_FEATURE_CX8
 # define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
 #else
 # define NEED_CX8	0
 #endif
 
-#if defined(CONFIG_X86_CMOV) || defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_REQUIRED_FEATURE_CMOV) || defined(CONFIG_X86_64)
 # define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
 #else
 # define NEED_CMOV	0
Signature · 1 line
2.45.0
maintainer
#2 lore raw

Re: [RESEND v1 1/3] x86/cpufeatures: Add {required,disabled} feature configs

arch/x86/Kconfig.cpu config X86_P6_NOP · line 361

Quoted 9 lines · Xin Li (Intel)
arch/x86/Kconfig.cpu +1 -0
index 2a7279d80460..719302d37053 100644
@@ -358,6 +358,10 @@ config X86_P6_NOP
 	depends on X86_64
 	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
+config X86_REQUIRED_FEATURE_NOPL

Can we keep the X86_{REQUIRED,DISABLED}_ prefixes solely in arch/x86/Kconfig.cpufeatures and not spill them out into the rest of the tree?

This way there will be no confusion between X86_FEATURE_, X86_REQUIRED_FEATURE_, X86_DISABLED_FEATURE_ and so on, and which one I am supposed to use where...

Quoted 6 lines
arch/x86/Kconfig.cpufeatures new file +0 -0
new file mode 100644
index 000000000000..326a8410ff06

arch/x86/Kconfig.cpufeatures line 9

Quoted 9 lines
arch/x86/Kconfig.cpufeatures new file +9 -0
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# x86 feature bits (see arch/x86/include/asm/cpufeatures.h) that are
+# either REQUIRED to be enabled, or DISABLED (always ignored) for this
+# particular compile-time configuration.  The tests for these features
+# are turned into compile-time constants via the generated
+# <asm/featuremasks.h>.
+#
+# The naming of these variables *must* match asm/cpufeatures.h.

I presume they must match X86_FEATURE_<name>?

And REQUIRED and DISABLED is manipulated in by the script?

I guess I'll see later.

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
author
#3 lore raw

Re: [RESEND v1 1/3] x86/cpufeatures: Add {required,disabled} feature configs

Quoted 9 lines · Borislav Petkov
Quoted 8 lines · Xin Li (Intel)
arch/x86/Kconfig.cpu +0 -0
index 2a7279d80460..719302d37053 100644
@@ -358,6 +358,10 @@ config X86_P6_NOP
  	depends on X86_64
  	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
Quoted 4 lines

arch/x86/Kconfig.cpu config X86_P6_NOP · line 361

Quoted 1 line
arch/x86/Kconfig.cpu +1 -0
+config X86_REQUIRED_FEATURE_NOPL

Can we keep the X86_{REQUIRED,DISABLED}_ prefixes solely in arch/x86/Kconfig.cpufeatures and not spill them out into the rest of the tree?

Good point, let me try.

Quoted 3 lines

This way there will be no confusion between X86_FEATURE_, X86_REQUIRED_FEATURE_, X86_DISABLED_FEATURE_ and so on, and which one I am supposed to use where...

Currently X86_DISABLED_FEATURE_ macros are defined only in:
arch/x86/Kconfig.cpufeatures. But X86_REQUIRED_FEATURE_ macros are not.

Quoted 9 lines
Quoted 9 lines
arch/x86/Kconfig.cpufeatures new file +3 -0
new file mode 100644
index 000000000000..326a8410ff06
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# x86 feature bits (see arch/x86/include/asm/cpufeatures.h) that are
Quoted 8 lines

arch/x86/Kconfig.cpufeatures line 9

Quoted 6 lines
arch/x86/Kconfig.cpufeatures new file +6 -0
+# either REQUIRED to be enabled, or DISABLED (always ignored) for this
+# particular compile-time configuration.  The tests for these features
+# are turned into compile-time constants via the generated
+# <asm/featuremasks.h>.
+#
+# The naming of these variables *must* match asm/cpufeatures.h.

I presume they must match X86_FEATURE_<name>?

Right, let me add this.

Quoted 4 lines

And REQUIRED and DISABLED is manipulated in by the script?

I guess I'll see later.

Yep!

Thanks!
Xin

#4 lore raw

PATCH RESEND 2/3 x86/cpufeatures: Generate a feature mask header based on build config

In reply to Xin Li (Intel)

From: "H. Peter Anvin (Intel)" <[email protected]>

Introduce an AWK script to auto-generate a header with required and disabled feature masks based on <asm/cpufeatures.h> and current build config. Thus for any CPU feature with a build config, e.g., X86_FRED, simply add

config X86_DISABLED_FEATURE_FRED
def_bool y
depends on !X86_FRED

to arch/x86/Kconfig.cpufeatures, instead of adding a conditional CPU feature disable flag, e.g., DISABLE_FRED.

Besides, the generated required and disabled feature masks will be added to their corresponding CPU feature masks automatically.

[ Xin: build integration improvements ]

---
 arch/x86/Makefile                  |  17 ++++-
 arch/x86/boot/cpucheck.c           |   3 +-
 arch/x86/boot/cpuflags.c           |   1 -
 arch/x86/boot/mkcpustr.c           |   3 +-
 arch/x86/include/asm/Kbuild        |   1 +
 arch/x86/include/asm/cpufeature.h  |   1 +
 arch/x86/include/asm/cpufeatures.h |   8 ---
 arch/x86/kernel/verify_cpu.S       |   1 +
 arch/x86/tools/featuremasks.awk    | 108 +++++++++++++++++++++++++++++
 9 files changed, 129 insertions(+), 14 deletions(-)
 create mode 100755 arch/x86/tools/featuremasks.awk
arch/x86/Makefile +15 -2
index 5ab93fcdd691..2a364fe0a5b4 100644
@@ -241,9 +241,22 @@ archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
 
 ###
-# Syscall table generation
+# Feature masks header and syscall table generation
 
-archheaders:
+out := arch/x86/include/generated/asm
+featuremasks_hdr := featuremasks.h
+featuremasks_awk := $(srctree)/arch/x86/tools/featuremasks.awk
+cpufeatures_hdr := $(srctree)/arch/x86/include/asm/cpufeatures.h
+quiet_cmd_gen_featuremasks = GEN     $@
+      cmd_gen_featuremasks = $(AWK) -f $(featuremasks_awk) $(cpufeatures_hdr) $(KCONFIG_CONFIG) > $@
+
+$(out)/$(featuremasks_hdr): $(featuremasks_awk) $(cpufeatures_hdr) $(KCONFIG_CONFIG) FORCE
+	$(shell mkdir -p $(out))
+	$(call if_changed,gen_featuremasks)
+
+targets += $(out)/$(featuremasks_hdr)
+
+archheaders: $(out)/$(featuremasks_hdr)
 	$(Q)$(MAKE) $(build)=arch/x86/entry/syscalls all
 
 ###
arch/x86/boot/cpucheck.c +2 -1
index fed8d13ce252..49b982c4e932 100644
@@ -22,10 +22,11 @@
 # include "boot.h"
 #endif
 #include <linux/types.h>
+#include <asm/featuremasks.h>
 #include <asm/intel-family.h>
 #include <asm/processor-flags.h>
-#include <asm/required-features.h>
 #include <asm/msr-index.h>
+
 #include "string.h"
 #include "msr.h"
 
arch/x86/boot/cpuflags.c +0 -1
index d75237ba7ce9..0cabdacb2a2f 100644
@@ -3,7 +3,6 @@
 #include "bitops.h"
 
 #include <asm/processor-flags.h>
-#include <asm/required-features.h>
 #include <asm/msr-index.h>
 #include "cpuflags.h"
 
arch/x86/boot/mkcpustr.c +1 -2
index da0ccc5de538..b90110109675 100644
@@ -12,8 +12,6 @@
 
 #include <stdio.h>
 
-#include "../include/asm/required-features.h"
-#include "../include/asm/disabled-features.h"
 #include "../include/asm/cpufeatures.h"
 #include "../include/asm/vmxfeatures.h"
 #include "../kernel/cpu/capflags.c"
@@ -23,6 +21,7 @@ int main(void)
 	int i, j;
 	const char *str;
 
+	printf("#include <asm/featuremasks.h>\n\n");
 	printf("static const char x86_cap_strs[] =\n");
 
 	for (i = 0; i < NCAPINTS; i++) {
arch/x86/include/asm/Kbuild +1 -0
index a192bdea69e2..29c3481f40fc 100644
@@ -8,6 +8,7 @@ generated-y += syscalls_x32.h
 generated-y += unistd_32_ia32.h
 generated-y += unistd_64_x32.h
 generated-y += xen-hypercalls.h
+generated-y += featuremasks.h
 
 generic-y += early_ioremap.h
 generic-y += mcs_spinlock.h
arch/x86/include/asm/cpufeature.h +1 -0
index 0b9611da6c53..8332f596ba3c 100644
@@ -9,6 +9,7 @@
 #include <asm/asm.h>
 #include <linux/bitops.h>
 #include <asm/alternative.h>
+#include <asm/featuremasks.h>
 
 enum cpuid_leafs
 {
arch/x86/include/asm/cpufeatures.h +0 -8
index 3c7434329661..05503448b94d 100644
@@ -2,14 +2,6 @@
 #ifndef _ASM_X86_CPUFEATURES_H
 #define _ASM_X86_CPUFEATURES_H
 
-#ifndef _ASM_X86_REQUIRED_FEATURES_H
-#include <asm/required-features.h>
-#endif
-
-#ifndef _ASM_X86_DISABLED_FEATURES_H
-#include <asm/disabled-features.h>
-#endif
-
 /*
  * Defines x86 CPU feature bits
  */
arch/x86/kernel/verify_cpu.S +1 -0
index 1258a5872d12..3205cbb47b9c 100644
@@ -29,6 +29,7 @@
  */
 
 #include <asm/cpufeatures.h>
+#include <asm/featuremasks.h>
 #include <asm/msr-index.h>
 
 SYM_FUNC_START_LOCAL(verify_cpu)
arch/x86/tools/featuremasks.awk new file +108 -0

108 lines not on this page · raw message

Signature · 1 line
2.45.0
author
#5 lore raw

Re: [RESEND v1 2/3] x86/cpufeatures: Generate a feature mask header based on build config

Quoted 6 lines · Xin Li (Intel)

From: "H. Peter Anvin (Intel)" <[email protected]>

Introduce an AWK script to auto-generate a header with required and disabled feature masks based on <asm/cpufeatures.h> and current build config. Thus for any CPU feature with a build config, e.g., X86_FRED, simply add

...

Quoted 8 lines
arch/x86/tools/featuremasks.awk new file +8 -0
+
+		printf "\n#define %s_MASKS ", s;
+		pfx = "{";
+		for (i = 0; i < ncapints; i++) {
+			printf "%s \\\n\t%s_MASK_%d", pfx, s, i;
+			pfx = ",";
+		}
+		printf " \\\n}\n\n";

arch/x86/tools/featuremasks.awk line 99

Quoted 10 lines
arch/x86/tools/featuremasks.awk new file +10 -0
+
+		printf "#define %s_FEATURE(x) \\\n", s;
+		printf "\t((( ";
+		for (i = 0; i < ncapints; i++) {
+			if (masks[i]) {
+				printf "\\\n\t\t((x) >> 5) == %2d ? %s_MASK%-3d : ", i, s, i;
+			}
+		}
+		printf "0 \\\n";
+		printf "\t) >> ((x) & 31)) & 1)\n\n";

This code generates macros {REQUIRED,DISABLED}_FEATURE(x) to tell if a CPU feature, e.g., X86_FEATURE_FRED, is a required or disabled feature for this particular compile-time configuration.

But they are NOT currently used, so I prefer to remove them for now.

Thanks!
Xin

#6 lore raw

Re: [RESEND v1 2/3] x86/cpufeatures: Generate a feature mask header based on build config

Quoted 33 lines · Xin Li
Quoted 6 lines · Xin Li (Intel)

From: "H. Peter Anvin (Intel)" <[email protected]>

Introduce an AWK script to auto-generate a header with required and disabled feature masks based on <asm/cpufeatures.h> and current build config. Thus for any CPU feature with a build config, e.g., X86_FRED, simply add

...

Quoted 8 lines
arch/x86/tools/featuremasks.awk new file +8 -0
+
+		printf "\n#define %s_MASKS ", s;
+		pfx = "{";
+		for (i = 0; i < ncapints; i++) {
+			printf "%s \\\n\t%s_MASK_%d", pfx, s, i;
+			pfx = ",";
+		}
+		printf " \\\n}\n\n";

arch/x86/tools/featuremasks.awk line 99

Quoted 10 lines
arch/x86/tools/featuremasks.awk new file +10 -0
+
+		printf "#define %s_FEATURE(x) \\\n", s;
+		printf "\t((( ";
+		for (i = 0; i < ncapints; i++) {
+			if (masks[i]) {
+				printf "\\\n\t\t((x) >> 5) == %2d ? %s_MASK%-3d : ", i, s, i;
+			}
+		}
+		printf "0 \\\n";
+		printf "\t) >> ((x) & 31)) & 1)\n\n";

This code generates macros {REQUIRED,DISABLED}_FEATURE(x) to tell if a CPU feature, e.g., X86_FEATURE_FRED, is a required or disabled feature for this particular compile-time configuration.

Quoted 4 lines

But they are NOT currently used, so I prefer to remove them for now.

Thanks!
Xin

The goal with these is that it can eliminate the handwritten code that tests a long list of masks. Again, automation.

author
#7 lore raw

Re: [RESEND v1 2/3] x86/cpufeatures: Generate a feature mask header based on build config

Quoted 34 lines · H. Peter Anvin
Quoted 33 lines · Xin Li
Quoted 6 lines · Xin Li (Intel)

From: "H. Peter Anvin (Intel)" <[email protected]>

Introduce an AWK script to auto-generate a header with required and disabled feature masks based on <asm/cpufeatures.h> and current build config. Thus for any CPU feature with a build config, e.g., X86_FRED, simply add

...

Quoted 8 lines
arch/x86/tools/featuremasks.awk new file +8 -0
+
+		printf "\n#define %s_MASKS ", s;
+		pfx = "{";
+		for (i = 0; i < ncapints; i++) {
+			printf "%s \\\n\t%s_MASK_%d", pfx, s, i;
+			pfx = ",";
+		}
+		printf " \\\n}\n\n";

arch/x86/tools/featuremasks.awk line 99

Quoted 10 lines
arch/x86/tools/featuremasks.awk new file +10 -0
+
+		printf "#define %s_FEATURE(x) \\\n", s;
+		printf "\t((( ";
+		for (i = 0; i < ncapints; i++) {
+			if (masks[i]) {
+				printf "\\\n\t\t((x) >> 5) == %2d ? %s_MASK%-3d : ", i, s, i;
+			}
+		}
+		printf "0 \\\n";
+		printf "\t) >> ((x) & 31)) & 1)\n\n";

This code generates macros {REQUIRED,DISABLED}_FEATURE(x) to tell if a CPU feature, e.g., X86_FEATURE_FRED, is a required or disabled feature for this particular compile-time configuration.

Quoted 7 lines
Quoted 4 lines

But they are NOT currently used, so I prefer to remove them for now.

Thanks!
Xin

The goal with these is that it can eliminate the handwritten code that tests a long list of masks. Again, automation.

This piece of code is added back in the last patch of v3:

https://lore.kernel.org/lkml/[email protected]/

The generated macros {REQUIRED|DISABLED}_MASK_BIT_SET are way shorter than that in the original form:

#define REQUIRED_FEATURE(x)                             \
        ((                                              \
                ((x) >> 5) ==  0 ? REQUIRED_MASK0 :     \
                ((x) >> 5) ==  1 ? REQUIRED_MASK1 :     \
                ((x) >> 5) ==  3 ? REQUIRED_MASK3 : 0   \
        ) & (1 << ((x) & 31)))
#define REQUIRED_MASK_BIT_SET(x)                        \
        (REQUIRED_FEATURE(x) || BUILD_BUG_ON_ZERO(NCAPINTS != 22))

Thanks!
Xin

#8 lore raw

PATCH RESEND 3/3 x86/cpufeatures: Remove {disabled,required}-features.h

In reply to Xin Li (Intel)

The functionalities of {disabled,required}-features.h are replaced with the auto-generated header cpufeature_masks.h. Thus they are no longer needed. So delete them.

None of the macros defined in {disabled,required}-features.h is used in tools, delete them too.

---
 arch/x86/include/asm/disabled-features.h      | 161 ------------------
 arch/x86/include/asm/required-features.h      | 105 ------------
 tools/arch/x86/include/asm/cpufeatures.h      |   8 -
 .../arch/x86/include/asm/disabled-features.h  | 161 ------------------
 .../arch/x86/include/asm/required-features.h  | 105 ------------
 tools/perf/check-headers.sh                   |   2 -
 6 files changed, 542 deletions(-)
 delete mode 100644 arch/x86/include/asm/disabled-features.h
 delete mode 100644 arch/x86/include/asm/required-features.h
 delete mode 100644 tools/arch/x86/include/asm/disabled-features.h
 delete mode 100644 tools/arch/x86/include/asm/required-features.h
arch/x86/include/asm/disabled-features.h deleted +0 -161
deleted file mode 100644
index c492bdc97b05..000000000000
@@ -1,161 +0,0 @@
-#ifndef _ASM_X86_DISABLED_FEATURES_H
-#define _ASM_X86_DISABLED_FEATURES_H
-
-/* These features, although they might be available in a CPU
- * will not be used because the compile options to support
- * them are not present.
- *
- * This code allows them to be checked and disabled at
- * compile time without an explicit #ifdef.  Use
- * cpu_feature_enabled().
- */
-
-#ifdef CONFIG_X86_UMIP
-# define DISABLE_UMIP	0
-#else
-# define DISABLE_UMIP	(1<<(X86_FEATURE_UMIP & 31))
-#endif
-
-#ifdef CONFIG_X86_64
-# define DISABLE_VME		(1<<(X86_FEATURE_VME & 31))
-# define DISABLE_K6_MTRR	(1<<(X86_FEATURE_K6_MTRR & 31))
-# define DISABLE_CYRIX_ARR	(1<<(X86_FEATURE_CYRIX_ARR & 31))
-# define DISABLE_CENTAUR_MCR	(1<<(X86_FEATURE_CENTAUR_MCR & 31))
-# define DISABLE_PCID		0
-#else
-# define DISABLE_VME		0
-# define DISABLE_K6_MTRR	0
-# define DISABLE_CYRIX_ARR	0
-# define DISABLE_CENTAUR_MCR	0
-# define DISABLE_PCID		(1<<(X86_FEATURE_PCID & 31))
-#endif /* CONFIG_X86_64 */
-
-#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
-# define DISABLE_PKU		0
-# define DISABLE_OSPKE		0
-#else
-# define DISABLE_PKU		(1<<(X86_FEATURE_PKU & 31))
-# define DISABLE_OSPKE		(1<<(X86_FEATURE_OSPKE & 31))
-#endif /* CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS */
-
-#ifdef CONFIG_X86_5LEVEL
-# define DISABLE_LA57	0
-#else
-# define DISABLE_LA57	(1<<(X86_FEATURE_LA57 & 31))
-#endif
-
-#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
-# define DISABLE_PTI		0
-#else
-# define DISABLE_PTI		(1 << (X86_FEATURE_PTI & 31))
-#endif
-
-#ifdef CONFIG_MITIGATION_RETPOLINE
-# define DISABLE_RETPOLINE	0
-#else
-# define DISABLE_RETPOLINE	((1 << (X86_FEATURE_RETPOLINE & 31)) | \
-				 (1 << (X86_FEATURE_RETPOLINE_LFENCE & 31)))
-#endif
-
-#ifdef CONFIG_MITIGATION_RETHUNK
-# define DISABLE_RETHUNK	0
-#else
-# define DISABLE_RETHUNK	(1 << (X86_FEATURE_RETHUNK & 31))
-#endif
-
-#ifdef CONFIG_MITIGATION_UNRET_ENTRY
-# define DISABLE_UNRET		0
-#else
-# define DISABLE_UNRET		(1 << (X86_FEATURE_UNRET & 31))
-#endif
-
-#ifdef CONFIG_MITIGATION_CALL_DEPTH_TRACKING
-# define DISABLE_CALL_DEPTH_TRACKING	0
-#else
-# define DISABLE_CALL_DEPTH_TRACKING	(1 << (X86_FEATURE_CALL_DEPTH & 31))
-#endif
-
-#ifdef CONFIG_ADDRESS_MASKING
-# define DISABLE_LAM		0
-#else
-# define DISABLE_LAM		(1 << (X86_FEATURE_LAM & 31))
-#endif
-
-#ifdef CONFIG_INTEL_IOMMU_SVM
-# define DISABLE_ENQCMD		0
-#else
-# define DISABLE_ENQCMD		(1 << (X86_FEATURE_ENQCMD & 31))
-#endif
-
-#ifdef CONFIG_X86_SGX
-# define DISABLE_SGX	0
-#else
-# define DISABLE_SGX	(1 << (X86_FEATURE_SGX & 31))
-#endif
-
-#ifdef CONFIG_XEN_PV
-# define DISABLE_XENPV		0
-#else
-# define DISABLE_XENPV		(1 << (X86_FEATURE_XENPV & 31))
-#endif
-
-#ifdef CONFIG_INTEL_TDX_GUEST
-# define DISABLE_TDX_GUEST	0
-#else
-# define DISABLE_TDX_GUEST	(1 << (X86_FEATURE_TDX_GUEST & 31))
-#endif
-
-#ifdef CONFIG_X86_USER_SHADOW_STACK
-#define DISABLE_USER_SHSTK	0
-#else
-#define DISABLE_USER_SHSTK	(1 << (X86_FEATURE_USER_SHSTK & 31))
-#endif
-
-#ifdef CONFIG_X86_KERNEL_IBT
-#define DISABLE_IBT	0
-#else
-#define DISABLE_IBT	(1 << (X86_FEATURE_IBT & 31))
-#endif
-
-#ifdef CONFIG_X86_FRED
-# define DISABLE_FRED	0
-#else
-# define DISABLE_FRED	(1 << (X86_FEATURE_FRED & 31))
-#endif
-
-#ifdef CONFIG_KVM_AMD_SEV
-#define DISABLE_SEV_SNP		0
-#else
-#define DISABLE_SEV_SNP		(1 << (X86_FEATURE_SEV_SNP & 31))
-#endif
-
-/*
- * Make sure to add features to the correct mask
- */
-#define DISABLED_MASK0	(DISABLE_VME)
-#define DISABLED_MASK1	0
-#define DISABLED_MASK2	0
-#define DISABLED_MASK3	(DISABLE_CYRIX_ARR|DISABLE_CENTAUR_MCR|DISABLE_K6_MTRR)
-#define DISABLED_MASK4	(DISABLE_PCID)
-#define DISABLED_MASK5	0
-#define DISABLED_MASK6	0
-#define DISABLED_MASK7	(DISABLE_PTI)
-#define DISABLED_MASK8	(DISABLE_XENPV|DISABLE_TDX_GUEST)
-#define DISABLED_MASK9	(DISABLE_SGX)
-#define DISABLED_MASK10	0
-#define DISABLED_MASK11	(DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET| \
-			 DISABLE_CALL_DEPTH_TRACKING|DISABLE_USER_SHSTK)
-#define DISABLED_MASK12	(DISABLE_FRED|DISABLE_LAM)
-#define DISABLED_MASK13	0
-#define DISABLED_MASK14	0
-#define DISABLED_MASK15	0
-#define DISABLED_MASK16	(DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \
-			 DISABLE_ENQCMD)
-#define DISABLED_MASK17	0
-#define DISABLED_MASK18	(DISABLE_IBT)
-#define DISABLED_MASK19	(DISABLE_SEV_SNP)
-#define DISABLED_MASK20	0
-#define DISABLED_MASK21	0
-#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 22)
-
-#endif /* _ASM_X86_DISABLED_FEATURES_H */
arch/x86/include/asm/required-features.h deleted +0 -105

105 lines not on this page · raw message

tools/arch/x86/include/asm/cpufeatures.h +0 -8
index a38f8f9ba657..dc416fde6c92 100644
@@ -2,14 +2,6 @@
 #ifndef _ASM_X86_CPUFEATURES_H
 #define _ASM_X86_CPUFEATURES_H
 
-#ifndef _ASM_X86_REQUIRED_FEATURES_H
-#include <asm/required-features.h>
-#endif
-
-#ifndef _ASM_X86_DISABLED_FEATURES_H
-#include <asm/disabled-features.h>
-#endif
-
 /*
  * Defines x86 CPU feature bits
  */
tools/arch/x86/include/asm/disabled-features.h deleted +0 -161

161 lines not on this page · raw message

tools/arch/x86/include/asm/required-features.h deleted +0 -105

105 lines not on this page · raw message

tools/perf/check-headers.sh +0 -2
index 66ba33dbcef2..b85ab7c3f3c5 100755
@@ -33,8 +33,6 @@ FILES=(
   "include/linux/hash.h"
   "include/linux/list-sort.h"
   "include/uapi/linux/hw_breakpoint.h"
-  "arch/x86/include/asm/disabled-features.h"
-  "arch/x86/include/asm/required-features.h"
   "arch/x86/include/asm/cpufeatures.h"
   "arch/x86/include/asm/inat_types.h"
   "arch/x86/include/asm/emulate_prefix.h"
Signature · 1 line
2.45.0