sunxi: SPL SPI: add support for the V3s SoC
Subsystems (3)
PATCH 1/1 sunxi: SPL SPI: add support for the V3s SoC
The V3s is identical regarding register layout, clocks and resets to the sun6i variants. Therefore, we can just add the MACH_SUN8I_V3S to the sun6i compatible ones.
SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB SPI flash.
--- arch/arm/mach-sunxi/Kconfig | 2 +- arch/arm/mach-sunxi/spl_spi_sunxi.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)
arch/arm/mach-sunxi/Kconfig +1 -1
@@ -1078,7 +1078,7 @@ config SPL_STACK_R_ADDR config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN8I_V3S || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does
arch/arm/mach-sunxi/spl_spi_sunxi.c +2 -1
@@ -140,7 +140,8 @@ static bool is_sun6i_gen_spi(void) {return IS_ENABLED (CONFIG_SUNXI_GEN_SUN6I ) ||IS_ENABLED (CONFIG_SUN50I_GEN_H6 ) || -IS_ENABLED (CONFIG_SUNXI_GEN_NCAT2 ); +IS_ENABLED (CONFIG_SUNXI_GEN_NCAT2 ) || +IS_ENABLED (CONFIG_MACH_SUN8I_V3S ); }static uintptr_t spi0_base_address (void )
Signature · 1 line
2.39.2
On Tue, 14 May 2024 01:43:19 +0200
Michael Walle <[email protected]> wrote:
Hi Michael,
Quoted 3 lines
The V3s is identical regarding register layout, clocks and resets to the sun6i variants. Therefore, we can just add the
MACH_SUN8I_V3Sto the sun6i compatible ones.
Interesting, I was a bit surprised that this would be all we need, but indeed everything else falls into place, when none of the newer SoCs are used.
Regression-tested on an H616.
Quoted 4 lines
SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB SPI flash.
Signed-off-by Michael Walle <[email protected]>
Cheers,
Andre
Quoted 32 lines
--- arch/arm/mach-sunxi/Kconfig | 2 +- arch/arm/mach-sunxi/spl_spi_sunxi.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +1
-1@@ -1078,7 +1078,7 @@ config SPL_STACK_R_ADDR config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_R40 || MACH_SUN8I_V3S || SUN50I_GEN_H6 || MACH_SUNIV || SUNXI_GEN_NCAT2 help Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so doesarch/arm/mach-sunxi/spl_spi_sunxi.c +2
-1@@ -140,7 +140,8 @@ static bool is_sun6i_gen_spi(void) {return IS_ENABLED (CONFIG_SUNXI_GEN_SUN6I ) ||IS_ENABLED (CONFIG_SUN50I_GEN_H6 ) || -IS_ENABLED (CONFIG_SUNXI_GEN_NCAT2 ); +IS_ENABLED (CONFIG_SUNXI_GEN_NCAT2 ) || +IS_ENABLED (CONFIG_MACH_SUN8I_V3S ); }static uintptr_t spi0_base_address (void )
Quoted 6 lines · Michael Walle
The V3s is identical regarding register layout, clocks and resets to the sun6i variants. Therefore, we can just add the
MACH_SUN8I_V3Sto the sun6i compatible ones.SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB SPI flash.
Also here.. any news?
-michael
Quoted 9 lines · On Thu, 11 Jul 2024 15:40:47 +0200 "Michael Walle" <[email protected]> wrote:
Quoted 6 lines · Michael Walle
The V3s is identical regarding register layout, clocks and resets to the sun6i variants. Therefore, we can just add the
MACH_SUN8I_V3Sto the sun6i compatible ones.SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB SPI flash.
Also here.. any news?
I have all of them in my queue, to be part of the first pull request in the next few days.
Cheers,
Andre.
Quoted 2 lines
-michael