Support all phyCORE-i.MX8MP RAM variants
cover Support all phyCORE-i.MX8MP RAM variants
Add support for several RAM sizes and speed grades for phyCORE-i.MX8MP.
We have support with this series for:
- 1GB 1.5GHz
- 1GB 2GHz
- 2GB 1.5GHz (was supported before)
- 2GB 2GHz (was supported before)
- 4GB 1.5GHz
- 4GB 2GHz
- 8GB 2GHz
RAM size and speed grade is detected and set using EEPROM data on default. Alternative it is possible to set fix RAM size and speed over Kconfig.
Teresa
Benjamin Hahn (1):
board: phycore_imx8mp: enable setting 2GHz timings without RAM size
Teresa Remmet (3):
board: phytec: phycore-imx8mp: spl: Fix syle issue
board: phytec: phycore_imx8mp: Add support for different RAM sizes
board: phytec: phycore_imx8mp: Make RAM size configuration fix
board/phytec/phycore_imx8mp/Kconfig | 67 ++++++++ board/phytec/phycore_imx8mp/lpddr4_timing.c | 153 +++++++++++++++++++ board/phytec/phycore_imx8mp/lpddr4_timing.h | 16 ++ board/phytec/phycore_imx8mp/phycore-imx8mp.c | 11 ++ board/phytec/phycore_imx8mp/spl.c | 136 +++++++++-------- include/configs/phycore_imx8mp.h | 4 +- 6 files changed, 322 insertions(+), 65 deletions(-) create mode 100644 board/phytec/phycore_imx8mp/lpddr4_timing.h
Signature · 1 line
2.34.1
PATCH 1/4 board: phytec: phycore-imx8mp: spl: Fix syle issue
Use tabs instead of spaces.
--- board/phytec/phycore_imx8mp/spl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
board/phytec/phycore_imx8mp/spl.c +2 -2
@@ -25,8 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#define EEPROM_ADDR 0x51 -#define EEPROM_ADDR_FALLBACK 0x59 +#define EEPROM_ADDR 0x51 +#define EEPROM_ADDR_FALLBACK 0x59int spl_board_boot_device (enum boot_device boot_dev_spl) {
Signature · 1 line
2.34.1
PATCH 2/4 board: phytec: phycore_imx8mp: Add support for different RAM sizes
In reply to Teresa RemmetAdd support for different RAM sizes and speed grades on the phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz, 4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information stored in the EEPROM on the SoM.
--- board/phytec/phycore_imx8mp/lpddr4_timing.c | 153 +++++++++++++++++++ board/phytec/phycore_imx8mp/lpddr4_timing.h | 16 ++ board/phytec/phycore_imx8mp/phycore-imx8mp.c | 11 ++ board/phytec/phycore_imx8mp/spl.c | 100 +++++------- include/configs/phycore_imx8mp.h | 4 +- 5 files changed, 224 insertions(+), 60 deletions(-) create mode 100644 board/phytec/phycore_imx8mp/lpddr4_timing.h
board/phytec/phycore_imx8mp/lpddr4_timing.c +153 -0
@@ -1839,3 +1839,156 @@ struct dram_timing_info dram_timing = { .ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie), .fsp_table = { 3000, 400, 100, }, }; + +void set_dram_timings_2ghz_2gb (void ) +{ + dram_timing.ddrc_cfg[3 ].val =0x1323 ; + dram_timing.ddrc_cfg[4 ].val =0x1e84800 ; + dram_timing.ddrc_cfg[5 ].val =0x7a0118 ; + dram_timing.ddrc_cfg[8 ].val =0xc00307a3 ; + dram_timing.ddrc_cfg[9 ].val =0xc50000 ; + dram_timing.ddrc_cfg[10 ].val =0xf4003f ; + dram_timing.ddrc_cfg[11 ].val =0xf30000 ; + dram_timing.ddrc_cfg[14 ].val =0x2028222a ; + dram_timing.ddrc_cfg[15 ].val =0x8083f ; + dram_timing.ddrc_cfg[16 ].val =0xe0e000 ; + dram_timing.ddrc_cfg[17 ].val =0x12040a12 ; + dram_timing.ddrc_cfg[18 ].val =0x2050f0f ; + dram_timing.ddrc_cfg[19 ].val =0x1010009 ; + dram_timing.ddrc_cfg[20 ].val =0x502 ; + dram_timing.ddrc_cfg[21 ].val =0x20800 ; + dram_timing.ddrc_cfg[22 ].val =0xe100002 ; + dram_timing.ddrc_cfg[23 ].val =0x120 ; + dram_timing.ddrc_cfg[24 ].val =0xc80064 ; + dram_timing.ddrc_cfg[25 ].val =0x3e8001e ; + dram_timing.ddrc_cfg[26 ].val =0x3207a12 ; + dram_timing.ddrc_cfg[28 ].val =0x4a3820e ; + dram_timing.ddrc_cfg[30 ].val =0x230e ; + dram_timing.ddrc_cfg[37 ].val =0x799 ; + dram_timing.ddrc_cfg[38 ].val =0x9141d1c ; + dram_timing.ddrc_cfg[74 ].val =0x302 ; + dram_timing.ddrc_cfg[83 ].val =0x599 ; + dram_timing.ddrc_cfg[99 ].val =0x302 ; + dram_timing.ddrc_cfg[108 ].val =0x599 ; + dram_timing.ddrphy_cfg[66 ].val =0x18 ; + dram_timing.ddrphy_cfg[75 ].val =0x1e3 ; + dram_timing.ddrphy_cfg[77 ].val =0x1e3 ; + dram_timing.ddrphy_cfg[79 ].val =0x1e3 ; + dram_timing.ddrphy_cfg[145 ].val =0x3e8 ; + dram_timing.fsp_msg[0 ].drate =4000 ; + dram_timing.fsp_msg[0 ].fsp_cfg[1 ].val =0xfa0 ; + dram_timing.fsp_msg[0 ].fsp_cfg[10 ].val =0x3ff4 ; + dram_timing.fsp_msg[0 ].fsp_cfg[11 ].val =0xf3 ; + dram_timing.fsp_msg[0 ].fsp_cfg[15 ].val =0x3ff4 ; + dram_timing.fsp_msg[0 ].fsp_cfg[16 ].val =0xf3 ; + dram_timing.fsp_msg[0 ].fsp_cfg[22 ].val =0xf400 ; + dram_timing.fsp_msg[0 ].fsp_cfg[23 ].val =0xf33f ; + dram_timing.fsp_msg[0 ].fsp_cfg[28 ].val =0xf400 ; + dram_timing.fsp_msg[0 ].fsp_cfg[29 ].val =0xf33f ; + dram_timing.fsp_msg[3 ].drate =4000 ; + dram_timing.fsp_msg[3 ].fsp_cfg[1 ].val =0xfa0 ; + dram_timing.fsp_msg[3 ].fsp_cfg[11 ].val =0x3ff4 ; + dram_timing.fsp_msg[3 ].fsp_cfg[12 ].val =0xf3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[16 ].val =0x3ff4 ; + dram_timing.fsp_msg[3 ].fsp_cfg[17 ].val =0xf3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[23 ].val =0xf400 ; + dram_timing.fsp_msg[3 ].fsp_cfg[24 ].val =0xf33f ; + dram_timing.fsp_msg[3 ].fsp_cfg[29 ].val =0xf400 ; + dram_timing.fsp_msg[3 ].fsp_cfg[30 ].val =0xf33f ; + dram_timing.ddrphy_pie[480 ].val =0x465 ; + dram_timing.ddrphy_pie[481 ].val =0xfa ; + dram_timing.ddrphy_pie[482 ].val =0x9c4 ; + dram_timing.fsp_table[0 ] =4000 ; +} + +void set_dram_timings_1_5ghz_1gb (void ) +{ + dram_timing.ddrc_cfg[3 ].val =0x1233 ; + dram_timing.ddrc_cfg[5 ].val =0x5b0087 ; + dram_timing.ddrc_cfg[6 ].val =0x61027f10 ; + dram_timing.ddrc_cfg[7 ].val =0x7b0 ; + dram_timing.ddrc_cfg[11 ].val =0xf30000 ; + dram_timing.ddrc_cfg[23 ].val =0x8d ; + dram_timing.ddrc_cfg[45 ].val =0xf070707 ; + dram_timing.ddrc_cfg[59 ].val =0x1031 ; + dram_timing.ddrc_cfg[62 ].val =0xc0012 ; + dram_timing.ddrc_cfg[77 ].val =0x13 ; + dram_timing.ddrc_cfg[84 ].val =0x1031 ; + dram_timing.ddrc_cfg[87 ].val =0x30005 ; + dram_timing.ddrc_cfg[102 ].val =0x5 ; + dram_timing.ddrphy_cfg[75 ].val =0x1e3 ; + dram_timing.ddrphy_cfg[77 ].val =0x1e3 ; + dram_timing.ddrphy_cfg[79 ].val =0x1e3 ; + dram_timing.fsp_msg[0 ].fsp_cfg[11 ].val =0xf3 ; + dram_timing.fsp_msg[0 ].fsp_cfg[16 ].val =0xf3 ; + dram_timing.fsp_msg[0 ].fsp_cfg[23 ].val =0xf32d ; + dram_timing.fsp_msg[0 ].fsp_cfg[29 ].val =0xf32d ; + dram_timing.fsp_msg[3 ].fsp_cfg[12 ].val =0xf3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[17 ].val =0xf3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[24 ].val =0xf32d ; + dram_timing.fsp_msg[3 ].fsp_cfg[30 ].val =0xf32d ; +} + +void set_dram_timings_2ghz_1gb (void ) +{ +set_dram_timings_2ghz_2gb (); + dram_timing.ddrc_cfg[5 ].val =0x7a00b4 ; + dram_timing.ddrc_cfg[23 ].val =0xbc ; + dram_timing.ddrc_cfg[45 ].val =0xf070707 ; + dram_timing.ddrc_cfg[62 ].val =0xc0012 ; + dram_timing.ddrc_cfg[77 ].val =0x13 ; + dram_timing.ddrc_cfg[87 ].val =0x30005 ; + dram_timing.ddrc_cfg[102 ].val =0x5 ; +} + +void set_dram_timings_1_5ghz_4gb (void ) +{ + dram_timing.ddrc_cfg[2 ].val =0xa3080020 ; + dram_timing.ddrc_cfg[39 ].val =0x17 ; + dram_timing.fsp_msg[0 ].fsp_cfg[9 ].val =0x310 ; + dram_timing.fsp_msg[0 ].fsp_cfg[21 ].val =0x3 ; + dram_timing.fsp_msg[1 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[1 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[2 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[2 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[3 ].fsp_cfg[22 ].val =0x3 ; +} + +void set_dram_timings_2ghz_4gb (void ) +{ +set_dram_timings_2ghz_2gb (); + dram_timing.ddrc_cfg[2 ].val =0xa3080020 ; + dram_timing.ddrc_cfg[39 ].val =0x17 ; + dram_timing.fsp_msg[0 ].fsp_cfg[9 ].val =0x310 ; + dram_timing.fsp_msg[0 ].fsp_cfg[21 ].val =0x3 ; + dram_timing.fsp_msg[1 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[1 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[2 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[2 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[3 ].fsp_cfg[22 ].val =0x3 ; +} + +void set_dram_timings_2ghz_8gb (void ) +{ +set_dram_timings_2ghz_2gb (); + dram_timing.ddrc_cfg[2 ].val =0xa3080020 ; + dram_timing.ddrc_cfg[5 ].val =0x7a017c ; + dram_timing.ddrc_cfg[23 ].val =0x184 ; + dram_timing.ddrc_cfg[39 ].val =0x18 ; + dram_timing.ddrc_cfg[46 ].val =0xf07 ; + dram_timing.ddrc_cfg[62 ].val =0xc0026 ; + dram_timing.ddrc_cfg[77 ].val =0x27 ; + dram_timing.ddrc_cfg[87 ].val =0x3000a ; + dram_timing.ddrc_cfg[102 ].val =0xa ; + + dram_timing.fsp_msg[0 ].fsp_cfg[9 ].val =0x310 ; + dram_timing.fsp_msg[0 ].fsp_cfg[21 ].val =0x3 ; + dram_timing.fsp_msg[1 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[1 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[2 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[2 ].fsp_cfg[22 ].val =0x3 ; + dram_timing.fsp_msg[3 ].fsp_cfg[10 ].val =0x310 ; + dram_timing.fsp_msg[3 ].fsp_cfg[22 ].val =0x3 ; +}
board/phytec/phycore_imx8mp/lpddr4_timing.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* Copyright (C) 2024 PHYTEC Messtechnik GmbH +*/ + +#ifndef __LPDDR4_TIMING_H__ +#define __LPDDR4_TIMING_H__ + +void set_dram_timings_2ghz_2gb (void ); +void set_dram_timings_2ghz_1gb (void ); +void set_dram_timings_2ghz_4gb (void ); +void set_dram_timings_1_5ghz_1gb (void ); +void set_dram_timings_1_5ghz_4gb (void ); +void set_dram_timings_2ghz_8gb (void ); + +#endif /* __LPDDR4_TIMING_H__ */
board/phytec/phycore_imx8mp/phycore-imx8mp.c +11 -0
@@ -10,6 +10,7 @@#include <asm/io.h> #include <asm/mach-imx/boot_mode.h> #include <env.h> +#include <init.h> #include <miiphy.h> DECLARE_GLOBAL_DATA_PTR ;
@@ -56,3 +57,13 @@ int board_late_init(void)return 0 ; } + +int board_phys_sdram_size (phys_size_t *size) +{ +if (!size) +return -EINVAL ; + + *size =get_ram_size ((void *)PHYS_SDRAM ,PHYS_SDRAM_SIZE +PHYS_SDRAM_2_SIZE ); + +return 0 ; +}
board/phytec/phycore_imx8mp/spl.c +41 -59
123 lines not on this page · raw message
include/configs/phycore_imx8mp.h +3 -1
@@ -22,6 +22,8 @@#define CFG_SYS_SDRAM_BASE 0x40000000#define PHYS_SDRAM 0x40000000 -#define PHYS_SDRAM_SIZE 0x80000000 +#define PHYS_SDRAM_SIZE (SZ_2G + SZ_1G)/* 3GB */ +#define PHYS_SDRAM_2 0x100000000 +#define PHYS_SDRAM_2_SIZE (SZ_4G + SZ_1G)/* 5GB */ #endif /* __PHYCORE_IMX8MP_H */
Signature · 1 line
2.34.1
PATCH 3/4 board: phytec: phycore_imx8mp: Make RAM size configuration fix
In reply to Teresa RemmetWe might not be able to always rely on the EEPROM introspection data. So add a config option alternative which configures the RAM size to a fix value.
We still try to read the EEPROM introspection data at this point. So we can print the SoM information if available.
--- board/phytec/phycore_imx8mp/Kconfig | 48 +++++++++++++++++++++++++++++ board/phytec/phycore_imx8mp/spl.c | 34 +++++++++++++++----- 2 files changed, 74 insertions(+), 8 deletions(-)
board/phytec/phycore_imx8mp/Kconfig +48 -0
@@ -12,5 +12,53 @@ config SYS_CONFIG_NAME config IMX_CONFIG default "board/phytec/phycore_imx8mp/imximage-8mp-sd.cfg" +config PHYCORE_IMX8MP_RAM_SIZE_FIX + bool "Set phyCORE-i.MX8MP RAM size fix instead of detecting" + default false + help + RAM size is automatic being detected with the help of + the EEPROM introspection data. Set RAM size to a fix value + instead. + +choice + prompt "phyCORE-i.MX8MP RAM size" + depends on PHYCORE_IMX8MP_RAM_SIZE_FIX + default PHYCORE_IMX8MP_RAM_SIZE_2GB + +config PHYCORE_IMX8MP_RAM_SIZE_1GB + bool "1GB RAM" + help + Set RAM size fix to 1GB for phyCORE-i.MX8MP. + RAM frequency is configured independent. + +config PHYCORE_IMX8MP_RAM_SIZE_2GB + bool "2GB RAM" + help + Set RAM size fix to 2GB for phyCORE-i.MX8MP. + RAM frequency is configured independent. + +config PHYCORE_IMX8MP_RAM_SIZE_4GB + bool "4GB RAM" + help + Set RAM size fix to 4GB for phyCORE-i.MX8MP. + RAM frequency is configured independent. + +config PHYCORE_IMX8MP_RAM_SIZE_8GB + bool "8GB RAM" + select PHYCORE_IMX8MP_USE_2GHZ_RAM_TIMINGS + help + Set RAM size fix to 8GB for phyCORE-i.MX8MP. + Only 2GHz RAMs are supported. + +endchoice + +config PHYCORE_IMX8MP_USE_2GHZ_RAM_TIMINGS + bool "Use 2GHz RAM timings" + depends on PHYCORE_IMX8MP_RAM_SIZE_FIX + default false + help + Use fix 2GHz RAM timings for phyCORE-i.MX8MP instead of + 1.5GHz timings. + source "board/phytec/common/Kconfig" endif
board/phytec/phycore_imx8mp/spl.c +26 -8
@@ -50,20 +50,38 @@ void spl_dram_init(void) ret =phytec_eeprom_data_setup_fallback (NULL ,0 ,EEPROM_ADDR ,EEPROM_ADDR_FALLBACK ); -if (ret) +if (ret && !IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_FIX )) goto out; ret =phytec_imx8m_detect (NULL );if (!ret)phytec_print_som_info (NULL ); -u8 rev =phytec_get_rev (NULL ); -u8 somtype =phytec_get_som_type (NULL ); - -if (rev !=PHYTEC_EEPROM_INVAL && (rev >=3 || (somtype ==SOM_TYPE_PCL && rev >=1 ))) - use_2ghz_timings = true; - - size =phytec_get_imx8m_ddr_size (NULL ); +if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_FIX )) { +if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_1GB )) + size =PHYTEC_IMX8MP_DDR_1GB ; +else if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_2GB )) + size =PHYTEC_IMX8MP_DDR_2GB ; +else if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_4GB )) + size =PHYTEC_IMX8MP_DDR_4GB ; +else if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_SIZE_8GB )) + size =PHYTEC_IMX8MP_DDR_8GB ; +if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_USE_2GHZ_RAM_TIMINGS )) { +if (size ==PHYTEC_IMX8MP_DDR_4GB ) + size =PHYTEC_IMX8MP_DDR_4GB_2GHZ ; +else + use_2ghz_timings = true; + } + }else { +u8 rev =phytec_get_rev (NULL ); +u8 somtype =phytec_get_som_type (NULL ); + +if (rev !=PHYTEC_EEPROM_INVAL && + (rev >=3 || (somtype ==SOM_TYPE_PCL && rev >=1 ))) + use_2ghz_timings = true; + + size =phytec_get_imx8m_ddr_size (NULL ); + }switch (size) {case PHYTEC_IMX8MP_DDR_1GB :
Signature · 1 line
2.34.1
PATCH 4/4 board: phycore_imx8mp: enable setting 2GHz timings without RAM size
In reply to Teresa RemmetFrom: Benjamin Hahn <[email protected]>
make it possible to set the RAM timing frequency statically independent from the RAM size. Fixed RAM timing frequency can be used while the RAM size is still determined by the EEPROM image.
--- board/phytec/phycore_imx8mp/Kconfig | 23 +++++++++++++++++++++-- board/phytec/phycore_imx8mp/spl.c | 12 ++++++++++-- 2 files changed, 31 insertions(+), 4 deletions(-)
board/phytec/phycore_imx8mp/Kconfig +21 -2
@@ -52,13 +52,32 @@ config PHYCORE_IMX8MP_RAM_SIZE_8GB endchoice +config PHYCORE_IMX8MP_RAM_FREQ_FIX + bool "Set phyCORE-i.MX8MP RAM frequency fix instead of detecting" + default false + help + RAM frequency is automatic being detected with the help of + the EEPROM introspection data. Set RAM frequency to a fix value + instead. + +choice + prompt "phyCORE-i.MX8MP RAM frequency" + depends on PHYCORE_IMX8MP_RAM_FREQ_FIX + default PHYCORE_IMX8MP_USE_1_5GHZ_RAM_TIMINGS + config PHYCORE_IMX8MP_USE_2GHZ_RAM_TIMINGS bool "Use 2GHz RAM timings" - depends on PHYCORE_IMX8MP_RAM_SIZE_FIX - default false help Use fix 2GHz RAM timings for phyCORE-i.MX8MP instead of 1.5GHz timings. +config PHYCORE_IMX8MP_USE_1_5GHZ_RAM_TIMINGS + depends on !PHYCORE_IMX8MP_RAM_SIZE_8GB + bool "Use 1.5GHz RAM timings" + help + Use fix 1.5GHz RAM timings for phyCORE-i.MX8MP instead of + 2GHz timings. +endchoice + source "board/phytec/common/Kconfig" endif
board/phytec/phycore_imx8mp/spl.c +10 -2
@@ -66,11 +66,21 @@ void spl_dram_init(void) size =PHYTEC_IMX8MP_DDR_4GB ; else if (IS_ENABLED(CONFIG_PHYCORE_IMX8MP_RAM_SIZE_8GB)) size =PHYTEC_IMX8MP_DDR_8GB ; + }else { + size =phytec_get_imx8m_ddr_size (NULL ); + } + +if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_RAM_FREQ_FIX )) {if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_USE_2GHZ_RAM_TIMINGS )) {if (size ==PHYTEC_IMX8MP_DDR_4GB ) size =PHYTEC_IMX8MP_DDR_4GB_2GHZ ;else use_2ghz_timings = true; + }else if (IS_ENABLED (CONFIG_PHYCORE_IMX8MP_USE_1_5GHZ_RAM_TIMINGS )) { +if (size ==PHYTEC_IMX8MP_DDR_4GB_2GHZ ) + size =PHYTEC_IMX8MP_DDR_4GB ; +else + use_2ghz_timings = false; } }else {u8 rev =phytec_get_rev (NULL );
@@ -79,8 +89,6 @@ void spl_dram_init(void)if (rev !=PHYTEC_EEPROM_INVAL && (rev >=3 || (somtype ==SOM_TYPE_PCL && rev >=1 ))) use_2ghz_timings = true; - - size =phytec_get_imx8m_ddr_size (NULL ); }switch (size) {
Signature · 1 line
2.34.1
Fabio Estevam
reviewerQuoted 12 lines · Teresa Remmet
Add support for several RAM sizes and speed grades for phyCORE-i.MX8MP.
We have support with this series for:
- 1GB 1.5GHz
- 1GB 2GHz
- 2GB 1.5GHz (was supported before)
- 2GB 2GHz (was supported before)
- 4GB 1.5GHz
- 4GB 2GHz
- 8GB 2GHz
Quoted 2 lines
RAM size and speed grade is detected and set using EEPROM data on default. Alternative it is possible to set fix RAM size and speed over
Kconfig.
Applied all to u-boot-imx/next, thanks.