Skip to contentSkip to conversation

drm/msm/adreno: Add support for Adreno 505 GPU

PATCH Superseded Barnabás Czémán 2 participants 8 messages Jun 4, 2024

Subsystems (4)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/msm/adreno: Add support for Adreno 505 GPU

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c      | 29 +++++++++++++++++------------
 drivers/gpu/drm/msm/adreno/adreno_device.c | 17 +++++++++++++++++
 drivers/gpu/drm/msm/adreno/adreno_gpu.h    |  5 +++++
 3 files changed, 39 insertions(+), 12 deletions(-)
drivers/gpu/drm/msm/adreno/a5xx_gpu.c +17 -12
index c003f970189b..c0b5373e90d7 100644
@@ -439,7 +439,8 @@ void a5xx_set_hwcg(struct msm_gpu *gpu, bool state)
 	const struct adreno_five_hwcg_regs *regs;
 	unsigned int i, sz;
 
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu)) {
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a508(adreno_gpu)) {
 		regs = a50x_hwcg;
 		sz = ARRAY_SIZE(a50x_hwcg);
 	} else if (adreno_is_a509(adreno_gpu) || adreno_is_a512(adreno_gpu)) {
@@ -483,7 +484,8 @@ static int a5xx_me_init(struct msm_gpu *gpu)
 	OUT_RING(ring, 0x00000000);
 
 	/* Specify workarounds for various microcode issues */
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a530(adreno_gpu)) {
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a530(adreno_gpu)) {
 		/* Workaround for token end syncs
 		 * Force a WFI after every direct-render 3D mode draw and every
 		 * 2D mode 3 draw
@@ -752,10 +754,11 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 		0x00100000 + adreno_gpu->info->gmem - 1);
 	gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MAX_HI, 0x00000000);
 
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu) ||
-	    adreno_is_a510(adreno_gpu)) {
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a508(adreno_gpu) || adreno_is_a510(adreno_gpu)) {
 		gpu_write(gpu, REG_A5XX_CP_MEQ_THRESHOLDS, 0x20);
-		if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu))
+		if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+			adreno_is_a508(adreno_gpu))
 			gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x400);
 		else
 			gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x20);
@@ -771,7 +774,8 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 		gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_1, 0x40201B16);
 	}
 
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu))
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a508(adreno_gpu))
 		gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL,
 			  (0x100 << 11 | 0x100 << 22));
 	else if (adreno_is_a509(adreno_gpu) || adreno_is_a510(adreno_gpu) ||
@@ -789,8 +793,9 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	 * Disable the RB sampler datapath DP2 clock gating optimization
 	 * for 1-SP GPUs, as it is enabled by default.
 	 */
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu) ||
-	    adreno_is_a509(adreno_gpu) || adreno_is_a512(adreno_gpu))
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a508(adreno_gpu) || adreno_is_a509(adreno_gpu) ||
+	    adreno_is_a512(adreno_gpu))
 		gpu_rmw(gpu, REG_A5XX_RB_DBG_ECO_CNTL, 0, (1 << 9));
 
 	/* Disable UCHE global filter as SP can invalidate/flush independently */
@@ -1345,7 +1350,7 @@ static int a5xx_pm_resume(struct msm_gpu *gpu)
 	if (ret)
 		return ret;
 
-	/* Adreno 506, 508, 509, 510, 512 needs manual RBBM sus/res control */
+	/* Adreno 505, 506, 508, 509, 510, 512 needs manual RBBM sus/res control */
 	if (!(adreno_is_a530(adreno_gpu) || adreno_is_a540(adreno_gpu))) {
 		/* Halt the sp_input_clk at HM level */
 		gpu_write(gpu, REG_A5XX_RBBM_CLOCK_CNTL, 0x00000055);
@@ -1388,9 +1393,9 @@ static int a5xx_pm_suspend(struct msm_gpu *gpu)
 	u32 mask = 0xf;
 	int i, ret;
 
-	/* A506, A508, A510 have 3 XIN ports in VBIF */
-	if (adreno_is_a506(adreno_gpu) || adreno_is_a508(adreno_gpu) ||
-	    adreno_is_a510(adreno_gpu))
+	/* A505, A506, A508, A510 have 3 XIN ports in VBIF */
+	if (adreno_is_a505(adreno_gpu) || adreno_is_a506(adreno_gpu) ||
+	    adreno_is_a508(adreno_gpu) || adreno_is_a510(adreno_gpu))
 		mask = 0x7;
 
 	/* Clear the VBIF pipe before shutting down */
drivers/gpu/drm/msm/adreno/adreno_device.c +17 -0
index c3703a51287b..7e1ff091acaf 100644
@@ -149,6 +149,23 @@ static const struct adreno_info gpulist[] = {
 		.gmem  = (SZ_1M + SZ_512K),
 		.inactive_period = DRM_MSM_INACTIVE_PERIOD,
 		.init  = a4xx_gpu_init,
+	}, {
+		.chip_ids = ADRENO_CHIP_IDS(0x05000500),
+		.family = ADRENO_5XX,
+		.revn = 505,
+		.fw = {
+			[ADRENO_FW_PM4] = "a530_pm4.fw",
+			[ADRENO_FW_PFP] = "a530_pfp.fw",
+		},
+		.gmem = (SZ_128K + SZ_8K),
+		/*
+		 * Increase inactive period to 250 to avoid bouncing
+		 * the GDSC which appears to make it grumpy
+		 */
+		.inactive_period = 250,
+		.quirks = ADRENO_QUIRK_TWO_PASS_USE_WFI |
+			  ADRENO_QUIRK_LMLOADKILL_DISABLE,
+		.init = a5xx_gpu_init,
 	}, {
 		.chip_ids = ADRENO_CHIP_IDS(0x05000600),
 		.family = ADRENO_5XX,
drivers/gpu/drm/msm/adreno/adreno_gpu.h +5 -0
index 77526892eb8c..b80cc4772cc0 100644
@@ -298,6 +298,11 @@ static inline int adreno_is_a430(const struct adreno_gpu *gpu)
 	return adreno_is_revn(gpu, 430);
 }
 
+static inline int adreno_is_a505(const struct adreno_gpu *gpu)
+{
+	return adreno_is_revn(gpu, 505);
+}
+
 static inline int adreno_is_a506(const struct adreno_gpu *gpu)
 {
 	return adreno_is_revn(gpu, 506);

---
base-commit: 861a3cb5a2a8480d361fa6708da24747d6fa72fe
change-id: 20240603-a505-e57389b61d2a

Best regards,

Signature · 1 line
Barnabás Czémán <[email protected]>
#1 lore raw
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

drivers/gpu/drm/msm/adreno/adreno_device.c static const struct adreno_info gpulist[] = { · line 165

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+		/*
+		 * Increase inactive period to 250 to avoid bouncing
+		 * the GDSC which appears to make it grumpy
+		 */
+		.inactive_period = 250,

Are you sure this is actually necessary?

Konrad

#2 lore raw
Quoted 17 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 7 lines

drivers/gpu/drm/msm/adreno/adreno_device.c static const struct adreno_info gpulist[] = { · line 165

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

Quoted 2 lines

Konrad

#3 lore raw
Quoted 25 lines · Barnabás Czémán
Quoted 23 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,
Quoted 3 lines
Quoted 1 line

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test suspend on msm8937 yet.
I can check on msm8953 with a506 maybe if a506 works fine with DRM_MSM_INACTIVE_PERIOD
then a505 would be fine with it also.

Quoted 3 lines
Quoted 3 lines

Konrad

#4 lore raw
Quoted 26 lines · Barnabás Czémán
Quoted 25 lines · Barnabás Czémán
Quoted 23 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test suspend on msm8937 yet.

The suspend here refers to device suspend, not system suspend. Adreno goes into device suspend every time you stop using it, i.e. after the rendering is done and there's no more work to do.

I suppose a good test scenario here would be to keep running and closing kmscube in a rapid fashion and checking if the GPU starts crashing for unknown reasons (the dmesg would denote that)

Quoted 3 lines

I can check on msm8953 with a506 maybe if a506 works fine with DRM_MSM_INACTIVE_PERIOD
then a505 would be fine with it also.

The more testing the merrier :)

Konrad

#5 lore raw
Quoted 38 lines · Konrad Dybcio
Quoted 26 lines · Barnabás Czémán
Quoted 25 lines · Barnabás Czémán
Quoted 23 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test suspend on msm8937 yet.

Quoted 8 lines

The suspend here refers to device suspend, not system suspend. Adreno goes into device suspend every time you stop using it, i.e. after the rendering is done and there's no more work to do.

I suppose a good test scenario here would be to keep running and closing kmscube in a rapid fashion and checking if the GPU starts crashing for unknown reasons (the dmesg would denote that)

I have checked on a505 and a506 with this small script while true; do kmscube; kill kmscube; done none of them crashing, so i am going to change it.

Quoted 7 lines
Quoted 3 lines

I can check on msm8953 with a506 maybe if a506 works fine with DRM_MSM_INACTIVE_PERIOD
then a505 would be fine with it also.

The more testing the merrier :)

Konrad

#6 lore raw
Quoted 43 lines · Barnabás Czémán
Quoted 42 lines · Konrad Dybcio
Quoted 26 lines · Barnabás Czémán
Quoted 25 lines · Barnabás Czémán
Quoted 23 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 5 lines
drivers/gpu/drm/msm/adreno/adreno_device.c +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test suspend on msm8937 yet.

The suspend here refers to device suspend, not system suspend. Adreno goes into device suspend every time you stop using it, i.e. after the rendering is done and there's no more work to do.

Quoted 7 lines
Quoted 4 lines

I suppose a good test scenario here would be to keep running and closing kmscube in a rapid fashion and checking if the GPU starts crashing for unknown reasons (the dmesg would denote that)

I have checked on a505 and a506 with this small script while true; do kmscube; kill kmscube; done none of them crashing, so i am going to change it.

Hmm.. not sure if it actually idled when tested in a tight loop.. If you're running bash, try "while true; do kmscube &; sleep 0.08; pkill -f kmscube; sleep 0.08;done"

Konrad

#7 lore raw
Quoted 51 lines · Konrad Dybcio
Quoted 47 lines · Barnabás Czémán
Quoted 46 lines · Konrad Dybcio
Quoted 26 lines · Barnabás Czémán
Quoted 25 lines · Barnabás Czémán
Quoted 23 lines · Konrad Dybcio
Quoted 8 lines · Barnabás Czémán

From: Daniil Titov <[email protected]>

This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz), SDM439 (650 MHz).

---

This all looks very good, just a nit

[...]

Quoted 5 lines
(quoted diff) +5 -0
+             /*
+              * Increase inactive period to 250 to avoid bouncing
+              * the GDSC which appears to make it grumpy
+              */
+             .inactive_period = 250,
Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Are you sure this is actually necessary?

Every A5XX GPU is using the same value, but i have never tried with DRM_MSM_INACTIVE_PERIOD.

This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test suspend on msm8937 yet.

The suspend here refers to device suspend, not system suspend. Adreno goes into device suspend every time you stop using it, i.e. after the rendering is done and there's no more work to do.

I suppose a good test scenario here would be to keep running and closing kmscube in a rapid fashion and checking if the GPU starts crashing for unknown reasons (the dmesg would denote that)

Quoted 7 lines
Quoted 3 lines

I have checked on a505 and a506 with this small script while true; do kmscube; kill kmscube; done none of them crashing, so i am going to change it.

Hmm.. not sure if it actually idled when tested in a tight loop.. If you're running bash, try "while true; do kmscube &; sleep 0.08; pkill -f kmscube; sleep 0.08;done"

I see no crash

Quoted 1 line

Konrad