drm/todo: Create a TODO item for additional HDMI work
Subsystems (3)
Maxime Ripard
maintainerPATCH 1/3 drm/todo: Create a TODO item for additional HDMI work
We recently added some infrastructure to deal with HDMI but we're still lacking a couple of things. Add a TODO entry with the remaining items.
--- Documentation/gpu/todo.rst | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
Documentation/gpu/todo.rst +29 -0
@@ -633,10 +633,39 @@ long as that supports DMA. Otherwise importing can still needlessly fail. Contact: Thomas Zimmermann <[email protected]>, Daniel Vetter Level: Advanced +Improve HDMI Infrastructure +--------------------------- + +We have a bunch of helpers to handle HDMI and reduce the boilerplate in +drivers. Support so far includes HDMI 1.4 support, but we need to extend +it with: + + - CEC handling support. CEC requires a bit of integration into every + HDMI driver to set the device physical address according to the EDID + in `.get_modes`, and to clear/reset it in the hotplug detection + path. We should create the ``drm_atomic_helper_connector_hdmi_get_modes()`` + and ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helpers to handle + this properly, and convert drivers to use them. + + - In order to support HDMI 2.0 properly, the scrambler parameters need + to be moved into the state. This includes figuring out in + drm_atomic_helper_connector_hdmi_check() if the scrambler and TMDS ratio + need to be changed, and make the + ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helper reset the + scrambler status when the device is plugged and unplugged. + + - We need to support YUV420 too. + +The `vc4` driver is a good example for all this. + +Contact: Maxime Ripard <[email protected]> + +Level: Intermediate + Better Testing ============== Add unit tests using the Kernel Unit Testing (KUnit) framework
Signature · 1 line
2.45.2
Maxime Ripard
maintainerPATCH 2/3 drm/todo: Create a TODO item for MIPI-DSI rework
The MIPI-DSI infrastructure and setup we have so far is limited and doesn't provide a good way to address some corner-cases.
Add a TODO entry to document what is needed.
--- Documentation/gpu/todo.rst | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
Documentation/gpu/todo.rst +20 -0
@@ -633,10 +633,30 @@ long as that supports DMA. Otherwise importing can still needlessly fail. Contact: Thomas Zimmermann <[email protected]>, Daniel Vetter Level: Advanced +Improve MIPI-DSI infrastructure +------------------------------- + +The MIPI-DSI infrastructure in KMS supports MIPI-DSI devices in part +through a dedicated bus (`drm_mipi_dsi.c`) and in part through ad-hoc +calls in drivers, especially to handle the power state of the bus. + +This is an oddity as far as the device model is concerned, but is also +an issue when multiple devices are chained (like bridges) and have +different requirements. + +It would be a good idea to move all the power state handling out of KMS +and into the bus support itself. + +See `[RFC PATCH 03/10] drm/mipi-dsi: add API for manual control over the DSI link power state <https://lore.kernel.org/dri-devel/[email protected]/>`_ + +Contact: Maxime Ripard <[email protected]>, Dmitry Baryshkov <[email protected]> + +Level: Advanced + Improve HDMI Infrastructure --------------------------- We have a bunch of helpers to handle HDMI and reduce the boilerplate in drivers. Support so far includes HDMI 1.4 support, but we need to extend
Signature · 1 line
2.45.2
Maxime Ripard
maintainerPATCH 3/3 drm/todo: Add TODO entry for "lints"
In reply to Maxime RipardHaving lints would prove beneficial to prevent the same dark patterns from reoccuring over and over again in drivers.
Add a TODO entry for that.
--- Documentation/gpu/todo.rst | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
Documentation/gpu/todo.rst +28 -0
@@ -717,10 +717,38 @@ doesn't or document it if it does would be of great help. Contact: Maxime Ripard <[email protected]> Level: Intermediate +Create lints for KMS drivers +---------------------------- + +Over time, we've accumulated a list of dark patterns in KMS drivers that +should be avoided. However, none of them are published anywhere, and not +all reviewers are aware of them. It creates a situation where we have +more drivers with problematic / deprecated code, even though we know +that they shouldn't. + +We should create a set of coccinelle scripts that match these patterns, +and make new drivers run that list. And possibly integrate them in CI. + +These patterns include: + + - Drivers using kzalloc() or devm_kzalloc() to allocate their memory, + instead of drmm_kzalloc(). + + - Drivers not protecting their device resources (MMIO, clocks, + regulators, etc.) by drm_dev_enter() and drm_dev_exit(). + + - Drivers using drm_dev_unregister() instead of drm_dev_unplug(). + + - Drivers not calling drm_atomic_helper_shutdown() at shutdown + +Contact: Maxime Ripard <[email protected]> + +Level: Intermediate + Enable trinity for DRM ---------------------- And fix up the fallout. Should be really interesting ...
Signature · 1 line
2.45.2
Re: [PATCH 3/3] drm/todo: Add TODO entry for "lints"
Quoted 33 lines · Maxime Ripard
Having lints would prove beneficial to prevent the same dark patterns from reoccuring over and over again in drivers.
Add a TODO entry for that.
Signed-off-by Maxime Ripard <[email protected]>--- Documentation/gpu/todo.rst | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)Documentation/gpu/todo.rst +13
-0@@ -717,10 +717,38 @@ doesn't or document it if it does would be of great help. Contact: Maxime Ripard <[email protected]> Level: Intermediate +Create lints for KMS drivers +---------------------------- + +Over time, we've accumulated a list of dark patterns in KMS drivers that +should be avoided. However, none of them are published anywhere, and not +all reviewers are aware of them. It creates a situation where we have +more drivers with problematic / deprecated code, even though we know +that they shouldn't. + +We should create a set of coccinelle scripts that match these patterns, +and make new drivers run that list. And possibly integrate them in CI. + +These patterns include:
Documentation/gpu/todo.rst doesn't or document it if it does would be of great help. · line 744
Quoted 10 lines
Documentation/gpu/todo.rst +10
-0+ + - Drivers using kzalloc() or devm_kzalloc() to allocate their memory, + instead of drmm_kzalloc(). + + - Drivers not protecting their device resources (MMIO, clocks, + regulators, etc.) by drm_dev_enter() and drm_dev_exit(). + + - Drivers using drm_dev_unregister() instead of drm_dev_unplug(). + + - Drivers not calling drm_atomic_helper_shutdown() at shutdown
- Drivers setting state->allow_modeset manually.
Quoted 13 lines
Documentation/gpu/todo.rst +5
-0+ +Contact: Maxime Ripard <[email protected]> + +Level: Intermediate + Enable trinity for DRM ---------------------- And fix up the fallout. Should be really interesting ...Signature · 1 line
2.45.2
Signature · 2 lines
With best wishes Dmitry
Quoted 32 lines · Maxime Ripard
We recently added some infrastructure to deal with HDMI but we're still lacking a couple of things. Add a TODO entry with the remaining items.
Cc Dmitry Baryshkov <[email protected]>Signed-off-by Maxime Ripard <[email protected]>--- Documentation/gpu/todo.rst | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)Documentation/gpu/todo.rst +12
-0@@ -633,10 +633,39 @@ long as that supports DMA. Otherwise importing can still needlessly fail. Contact: Thomas Zimmermann <[email protected]>, Daniel Vetter Level: Advanced +Improve HDMI Infrastructure +--------------------------- + +We have a bunch of helpers to handle HDMI and reduce the boilerplate in +drivers. Support so far includes HDMI 1.4 support, but we need to extend +it with: + + - CEC handling support. CEC requires a bit of integration into every + HDMI driver to set the device physical address according to the EDID + in `.get_modes`, and to clear/reset it in the hotplug detection + path. We should create the ``drm_atomic_helper_connector_hdmi_get_modes()`` + and ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helpers to handle
Documentation/gpu/todo.rst long as that supports DMA. Otherwise importing can still needlessly fail. · line 659
Quoted 10 lines
Documentation/gpu/todo.rst +10
-0+ this properly, and convert drivers to use them. + + - In order to support HDMI 2.0 properly, the scrambler parameters need + to be moved into the state. This includes figuring out in + drm_atomic_helper_connector_hdmi_check() if the scrambler and TMDS ratio + need to be changed, and make the + ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helper reset the + scrambler status when the device is plugged and unplugged. + + - We need to support YUV420 too.
- HDMI audio improvements:
- Implement the get_eld() and possibly hook_plugged_cb() functions
for hdmi_codec_ops in a generic way. Maybe implementing generic HDMI hdmi_codec_ops and then providing device-specific hooks to prepare / shutdown / mute stream.
- provide helpers to determine ACR / N / CTS params
A different, but closely related topic is HDCP support in a generic
way. https://lore.kernel.org/dri-devel/[email protected]/
Quoted 15 lines
Documentation/gpu/todo.rst +7
-1+ +The `vc4` driver is a good example for all this. + +Contact: Maxime Ripard <[email protected]> + +Level: Intermediate + Better Testing ============== Add unit tests using the Kernel Unit Testing (KUnit) framework --2.45.2
Signature · 2 lines
With best wishes Dmitry
Quoted 22 lines · Maxime Ripard
We recently added some infrastructure to deal with HDMI but we're still lacking a couple of things. Add a TODO entry with the remaining items.
Cc Dmitry Baryshkov <[email protected]>Signed-off-by Maxime Ripard <[email protected]>--- Documentation/gpu/todo.rst | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)Documentation/gpu/todo.rst +3
-0@@ -633,10 +633,39 @@ long as that supports DMA. Otherwise importing can still needlessly fail. Contact: Thomas Zimmermann <[email protected]>, Daniel Vetter Level: Advanced +Improve HDMI Infrastructure +--------------------------- +
Documentation/gpu/todo.rst long as that supports DMA. Otherwise importing can still needlessly fail. · line 650
Quoted 10 lines
Documentation/gpu/todo.rst +10
-0+We have a bunch of helpers to handle HDMI and reduce the boilerplate in +drivers. Support so far includes HDMI 1.4 support, but we need to extend +it with: + + - CEC handling support. CEC requires a bit of integration into every + HDMI driver to set the device physical address according to the EDID + in `.get_modes`, and to clear/reset it in the hotplug detection + path. We should create the ``drm_atomic_helper_connector_hdmi_get_modes()`` + and ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helpers to handle + this properly, and convert drivers to use them.
Furthermore, we should stop passing EDID to the CEC functions, and instead use the source physical address we've parsed ourselves and stored to connector->display_info.source_physical_address.
I.e. stop using
- drm_dp_cec_set_edid()
- cec_s_phys_addr_from_edid()
- cec_get_edid_phys_addr()
And instead use .source_physical_address and
- drm_dp_cec_attach()
- cec_s_phys_addr()
The main rationale is to avoid using a separate EDID parser that's outside of the drm subsystem and unaware of struct drm_edid and frankly cdoes not look very robust.
BR,
Jani.
Quoted 21 lines
Documentation/gpu/todo.rst +16
-0+ + - In order to support HDMI 2.0 properly, the scrambler parameters need + to be moved into the state. This includes figuring out in + drm_atomic_helper_connector_hdmi_check() if the scrambler and TMDS ratio + need to be changed, and make the + ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helper reset the + scrambler status when the device is plugged and unplugged. + + - We need to support YUV420 too. + +The `vc4` driver is a good example for all this. + +Contact: Maxime Ripard <[email protected]> + +Level: Intermediate + Better Testing ============== Add unit tests using the Kernel Unit Testing (KUnit) framework
Signature · 1 line
Jani Nikula, Intel
Maxime Ripard
maintainerHi Jani,
Quoted 44 lines · Jani Nikula
Quoted 22 lines · Maxime Ripard
We recently added some infrastructure to deal with HDMI but we're still lacking a couple of things. Add a TODO entry with the remaining items.
Cc Dmitry Baryshkov <[email protected]>Signed-off-by Maxime Ripard <[email protected]>--- Documentation/gpu/todo.rst | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)Documentation/gpu/todo.rst +3
-0@@ -633,10 +633,39 @@ long as that supports DMA. Otherwise importing can still needlessly fail. Contact: Thomas Zimmermann <[email protected]>, Daniel Vetter Level: Advanced +Improve HDMI Infrastructure +--------------------------- +Documentation/gpu/todo.rst long as that supports DMA. Otherwise importing can still needlessly fail. · line 650
Quoted 10 lines
Documentation/gpu/todo.rst +10
-0+We have a bunch of helpers to handle HDMI and reduce the boilerplate in +drivers. Support so far includes HDMI 1.4 support, but we need to extend +it with: + + - CEC handling support. CEC requires a bit of integration into every + HDMI driver to set the device physical address according to the EDID + in `.get_modes`, and to clear/reset it in the hotplug detection + path. We should create the ``drm_atomic_helper_connector_hdmi_get_modes()`` + and ``drm_atomic_helper_connector_hdmi_handle_hotplug()`` helpers to handle + this properly, and convert drivers to use them.Furthermore, we should stop passing EDID to the CEC functions, and instead use the source physical address we've parsed ourselves and stored to
connector->display_info.source_physical_address.I.e. stop using
-
drm_dp_cec_set_edid()
-cec_s_phys_addr_from_edid()
-cec_get_edid_phys_addr()
Quoted 8 lines
And instead use .source_physical_address and
-
drm_dp_cec_attach()
-cec_s_phys_addr()The main rationale is to avoid using a separate EDID parser that's outside of the drm subsystem and unaware of struct
drm_edidand frankly cdoes not look very robust.
It's a good idea, but imo do not belong in that entry. I've added it to the last patch of this series which fits better to me.
Thanks!
Maxime