Increased address space for 64 bit
Subsystems (2)
v6 cover Increased address space for 64 bit
From: Benjamin Berg <[email protected]>
The new version of the patchset uses execveat on a memfd instead of cloning twice to disable rseq. This should be much more robust going forward as it will also avoid issues with other new features like mseal.
This patchset fixes a few bugs, adds a new method of discovering the host task size and finally adds four level page table support. All of this means the userspace TASK_SIZE is much larger and in turns permits userspace applications that need a lot of virtual addresses to work fine.
One such application is ASAN which uses a fixed address in memory that would otherwise not be addressable.
v6:
* Apply fixes pointed out by Tiwei Bie
* Add temporary file fallback as memfd is not always supported
v5:
* Use execveat with memfd instead of double clone
v4:
* Do not use WNOHANG in wait for CLONE_VFORK
v3:
* Undo incorrect change in child wait loop
v2:
* Improved double clone logic using CLONE_VFORK
* Kconfig fixes pointed out by Tiwei Bie
Benjamin Berg (7):
um: Add generic stub_syscall6 function
um: Add generic stub_syscall1 function
um: use execveat to create userspace MMs
um: Fix stub_start address calculation
um: Limit TASK_SIZE to the addressable range
um: Discover host_task_size from envp
um: Add 4 level page table support
arch/um/Kconfig | 1 + arch/um/include/asm/page.h | 14 +- arch/um/include/asm/pgalloc.h | 11 +- arch/um/include/asm/pgtable-4level.h | 119 +++++++++++++++++ arch/um/include/asm/pgtable.h | 6 +- arch/um/include/shared/as-layout.h | 2 +- arch/um/include/shared/os.h | 2 +- arch/um/include/shared/skas/stub-data.h | 11 ++ arch/um/kernel/mem.c | 17 ++- arch/um/kernel/um_arch.c | 14 +- arch/um/os-Linux/main.c | 9 +- arch/um/os-Linux/skas/process.c | 171 ++++++++++++++++-------- arch/x86/um/.gitignore | 2 + arch/x86/um/Kconfig | 38 ++++-- arch/x86/um/Makefile | 32 ++++- arch/x86/um/os-Linux/task_size.c | 19 ++- arch/x86/um/shared/sysdep/stub_32.h | 22 +++ arch/x86/um/shared/sysdep/stub_64.h | 27 ++++ arch/x86/um/stub_elf.c | 86 ++++++++++++ arch/x86/um/stub_elf_embed.S | 11 ++ 20 files changed, 528 insertions(+), 86 deletions(-) create mode 100644 arch/um/include/asm/pgtable-4level.h create mode 100644 arch/x86/um/.gitignore create mode 100644 arch/x86/um/stub_elf.c create mode 100644 arch/x86/um/stub_elf_embed.S
Signature · 1 line
2.45.2
PATCH v6 1/7 um: Add generic stub_syscall6 function
This function will be used by the new static stub binary.
--- arch/x86/um/shared/sysdep/stub_32.h | 22 ++++++++++++++++++++++ arch/x86/um/shared/sysdep/stub_64.h | 16 ++++++++++++++++ 2 files changed, 38 insertions(+)
arch/x86/um/shared/sysdep/stub_32.h +22 -0
@@ -79,6 +79,28 @@ static __always_inline long stub_syscall5(long syscall, long arg1, long arg2,return ret; } +static __always_inline long stub_syscall6 (long syscall,long arg1,long arg2, +long arg3,long arg4,long arg5, +long arg6) +{ +struct syscall_args { +int ebx, ebp; + } args = { arg1, arg6 }; +long ret; + + __asm__volatile ("pushl %%ebp;" +"movl 0x4(%%ebx),%%ebp;" +"movl (%%ebx),%%ebx;" +"int $0x80;" +"popl %%ebp" + :"=a" (ret) + :"0" (syscall),"b" (&args), +"c" (arg2),"d" (arg3),"S" (arg4),"D" (arg5) + :"memory" ); + +return ret; +} + static __always_inline void trap_myself(void) { __asm("int3" );
arch/x86/um/shared/sysdep/stub_64.h +16 -0
@@ -79,6 +79,22 @@ static __always_inline long stub_syscall5(long syscall, long arg1, long arg2,return ret; } +static __always_inline long stub_syscall6 (long syscall,long arg1,long arg2, +long arg3,long arg4,long arg5, +long arg6) +{ +long ret; + + __asm__volatile ("movq %5,%%r10 ; movq %6,%%r8 ; movq %7,%%r9 ; " + __syscall + :"=a" (ret) + :"0" (syscall),"D" (arg1),"S" (arg2),"d" (arg3), +"g" (arg4),"g" (arg5),"g" (arg6) + : __syscall_clobber, "r10", "r8", "r9"); + +return ret; +} + static __always_inline void trap_myself(void) { __asm("int3" );
Signature · 1 line
2.45.2
PATCH v6 2/7 um: Add generic stub_syscall1 function
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
The 64bit version did not have a stub_syscall1 function yet. Add it as it will be useful to implement a static binary for stub loading.
--- arch/x86/um/shared/sysdep/stub_64.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/x86/um/shared/sysdep/stub_64.h +11 -0
@@ -27,6 +27,17 @@ static __always_inline long stub_syscall0(long syscall)return ret; } +static __always_inline long stub_syscall1 (long syscall,long arg1) +{ +long ret; + + __asm__ volatile (__syscall + : "=a" (ret) + : "0" (syscall), "D" (arg1) : __syscall_clobber ); + +return ret; +} +static __always_inline long stub_syscall2 (long syscall,long arg1,long arg2) {long ret;
Signature · 1 line
2.45.2
PATCH v6 3/7 um: use execveat to create userspace MMs
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
Using clone will not undo features that have been enabled by libc. An example of this already happening is rseq, which could cause the kernel to read/write memory of the userspace process. In the future the standard library might also use mseal by default to protect itself, which would also thwart our attempts at unmapping everything.
Solve all this by taking a step back and doing an execve into a tiny static binary that sets up the minimal environment required for the stub without using any standard library. That way we have a clean execution environment that is fully under the control of UML.
Note that this changes things a bit as the FDs are not anymore shared with the kernel. Instead, we explicitly share the FDs for the physical memory and all existing iomem regions. Doing this is fine, as iomem regions cannot be added at runtime.
---
v6:
- Apply fixes pointed out by Tiwei Bie
- Add temporary file fallback as memfd is not always supported
--- arch/um/include/shared/skas/stub-data.h | 11 ++ arch/um/os-Linux/skas/process.c | 171 ++++++++++++++++-------- arch/x86/um/.gitignore | 2 + arch/x86/um/Makefile | 32 ++++- arch/x86/um/stub_elf.c | 86 ++++++++++++ arch/x86/um/stub_elf_embed.S | 11 ++ 6 files changed, 255 insertions(+), 58 deletions(-) create mode 100644 arch/x86/um/.gitignore create mode 100644 arch/x86/um/stub_elf.c create mode 100644 arch/x86/um/stub_elf_embed.S
arch/um/include/shared/skas/stub-data.h +11 -0
@@ -8,6 +8,17 @@ #ifndef __STUB_DATA_H #define __STUB_DATA_H +struct stub_init_data { + unsigned long stub_start; + + int stub_code_fd; + unsigned long stub_code_offset; + int stub_data_fd; + unsigned long stub_data_offset; + + unsigned long segv_handler; +}; + struct stub_data { unsigned long offset; int fd;
arch/um/os-Linux/skas/process.c +115 -56
207 lines not on this page · raw message
arch/x86/um/.gitignore new file +2 -0
@@ -0,0 +1,2 @@ +stub_elf +stub_elf.dbg
arch/x86/um/Makefile +30 -2
@@ -11,10 +11,37 @@ endif obj-y = bugs_$(BITS).o delay.o fault.o ldt.o \ ptrace_$(BITS).o ptrace_user.o setjmp_$(BITS).o signal.o \ - stub_$(BITS).o stub_segv.o \ + stub_$(BITS).o stub_segv.o stub_elf_embed.o \ sys_call_table_$(BITS).o sysrq_$(BITS).o tls_$(BITS).o \ mem_$(BITS).o subarch.o os-Linux/ +# Stub executable + +stub_elf_objs-y := stub_elf.o + +stub_elf_objs := $(foreach F,$(stub_elf_objs-y),$(obj)/$F) + +# Object file containing the ELF executable +$(obj)/stub_elf_embed.o: $(src)/stub_elf_embed.S $(obj)/stub_elf + +$(obj)/stub_elf.dbg: $(stub_elf_objs) FORCE + $(call if_changed,stub_elf) + +$(obj)/stub_elf: OBJCOPYFLAGS := -S +$(obj)/stub_elf: $(obj)/stub_elf.dbg FORCE + $(call if_changed,objcopy) + +quiet_cmd_stub_elf = STUB_ELF $@ + cmd_stub_elf = $(CC) -nostdlib -o $@ \ + $(CC_FLAGS_LTO) $(STUB_ELF_LDFLAGS) \ + $(filter %.o,$^) + +STUB_ELF_LDFLAGS = -n -static + +targets += stub_elf.dbg stub_elf $(stub_elf_objs-y) + +# end + ifeq ($(CONFIG_X86_32),y) obj-y += syscalls_32.o
@@ -46,7 +73,8 @@ targets += user-offsets.s include/generated/user_constants.h: $(obj)/user-offsets.s FORCE $(call filechk,offsets,__USER_CONSTANT_H__) -UNPROFILE_OBJS := stub_segv.o +UNPROFILE_OBJS := stub_segv.o stub_elf.o CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING) +CFLAGS_stub_elf.o := $(CFLAGS_NO_HARDENING) include $(srctree)/arch/um/scripts/Makefile.rules
arch/x86/um/stub_elf.c new file +86 -0
86 lines not on this page · raw message
arch/x86/um/stub_elf_embed.S new file +11 -0
@@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/init.h> +#include <linux/linkage.h> + +__INITDATA + +SYM_DATA_START(stub_elf_start) + .incbin "arch/x86/um/stub_elf" +SYM_DATA_END_LABEL(stub_elf_start, SYM_L_GLOBAL, stub_elf_end) + +__FINIT
Signature · 1 line
2.45.2
Johannes Berg
maintainerRe: [PATCH v6 3/7] um: use execveat to create userspace MMs
arch/um/os-Linux/skas/process.c static void handle_trap(int pid, struct uml_pt_regs *regs) · line 257
Quoted 6 lines · Benjamin Berg
arch/um/os-Linux/skas/process.c +5
-0+static int __init init_stub_exec_fd (void ) +{ +size_t len =0 ; +int res; +char tmpfile[] ="/tmp/uml-userspace-XXXXXX" ;
That seems awkward, perhaps it should use make_tempfile() from mem.c?
arch/um/os-Linux/skas/process.c static void handle_trap(int pid, struct uml_pt_regs *regs) · line 265
Quoted 1 line
arch/um/os-Linux/skas/process.c +1
-0+ stub_exec_fd =mkostemp (tmpfile,O_CLOEXEC );
mkostemp() also requires _GNU_SOURCE according to the man page? It also doesn't matter since you reopen the file anyway.
arch/um/os-Linux/skas/process.c static void handle_trap(int pid, struct uml_pt_regs *regs) · line 300
Quoted 9 lines
arch/um/os-Linux/skas/process.c +9
-0+/* Only executable by us */ +if (fchmod (stub_exec_fd,00100 ) <0 ) { +unlink (tmpfile); +panic ("Could not make stub binary excutable: %d" , + errno); + } + +close (stub_exec_fd); + stub_exec_fd =open (tmpfile,O_CLOEXEC );
Hmm. Technically, I think you _have_ to open for reading, writing, or both; not none? But then I guess you have to make it readable?
Might also want O_NOFOLLOW here?
arch/x86/um/stub_elf.c
Quoted 5 lines
arch/x86/um/stub_elf.c new file +0
-0
Is stub_elf really the right name? In practice it's going to be an ELF file, but ... who cares? Not sure why it should be called "elf" vs. just "stub" or "exec_stub" or something like that.
Also, is it really x86-specific?
Quoted 1 line
+++
b/arch/x86/um/stub_elf_embed.S
surely that isn't x86-specific?
johannes
PATCH v6 4/7 um: Fix stub_start address calculation
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
The calculation was wrong as it only subtracted one and then rounded down for alignment. However, this is incorrect if host_task_size is not already aligned.
This probably worked fine because on 64 bit the host_task_size is bigger than returned by os_get_top_address.
--- arch/um/kernel/um_arch.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/um/kernel/um_arch.c +2 -1
@@ -331,7 +331,8 @@ int __init linux_main(int argc, char **argv)/* reserve a few pages for the stubs (taking care of data alignment) */ /* align the data portion */ BUILD_BUG_ON (!is_power_of_2 (STUB_DATA_PAGES )); - stub_start = (host_task_size -1 ) & ~(STUB_DATA_PAGES *PAGE_SIZE -1 ); + stub_start = (host_task_size -STUB_DATA_PAGES *PAGE_SIZE ) & + ~(STUB_DATA_PAGES *PAGE_SIZE -1 );/* another page for the code portion */ stub_start -=PAGE_SIZE ; host_task_size = stub_start;
Signature · 1 line
2.45.2
PATCH v6 5/7 um: Limit TASK_SIZE to the addressable range
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
We may have a TASK_SIZE from the host that is bigger than UML is able to address with a three-level pagetable. Guard against that by clipping the maximum TASK_SIZE to the maximum addressable area.
--- arch/um/kernel/um_arch.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
arch/um/kernel/um_arch.c +6 -1
@@ -337,11 +337,16 @@ int __init linux_main(int argc, char **argv) stub_start -=PAGE_SIZE ; host_task_size = stub_start; +/* Limit TASK_SIZE to what is addressable by the page table */ + task_size = host_task_size; +if (task_size >PTRS_PER_PGD *PGDIR_SIZE ) + task_size =PTRS_PER_PGD *PGDIR_SIZE ; +/* * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps * out */ - task_size = host_task_size &PGDIR_MASK ; + task_size = task_size &PGDIR_MASK ;/* OS sanity checks that need to happen before the kernel runs */ os_early_checks ();
Signature · 1 line
2.45.2
PATCH v6 6/7 um: Discover host_task_size from envp
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
When loading the UML binary, the host kernel will place the stack at the highest possible address. It will then map the program name and environment variables onto the start of the stack.
As such, an easy way to figure out the host_task_size is to use the highest pointer to an environment variable as a reference.
Ensure that this works by disabling address layout randomization and re-executing UML in case it was enabled.
This increases the available TASK_SIZE for 64 bit UML considerably.
--- arch/um/include/shared/as-layout.h | 2 +- arch/um/include/shared/os.h | 2 +- arch/um/kernel/um_arch.c | 4 ++-- arch/um/os-Linux/main.c | 9 ++++++++- arch/x86/um/os-Linux/task_size.c | 19 +++++++++++++++---- 5 files changed, 27 insertions(+), 9 deletions(-)
arch/um/include/shared/as-layout.h +1 -1
@@ -48,7 +48,7 @@ extern unsigned long brk_start;extern unsigned long host_task_size;extern unsigned long stub_start; -extern int linux_main (int argc,char **argv); +extern int linux_main (int argc,char **argv,char **envp);extern void uml_finishsetup (void );struct siginfo ;
arch/um/include/shared/os.h +1 -1
@@ -327,7 +327,7 @@ extern int __ignore_sigio_fd(int fd);extern int get_pty (void );/* sys-$ARCH/task_size.c */ -extern unsigned long os_get_top_address (void ); +extern unsigned long os_get_top_address (char **envp);long syscall (long number, ...);
arch/um/kernel/um_arch.c +2 -2
@@ -305,7 +305,7 @@ static void parse_cache_line(char *line) } } -int __init linux_main (int argc,char **argv) +int __init linux_main (int argc,char **argv,char **envp) {unsigned long avail, diff;unsigned long virtmem_size, max_physmem;
@@ -327,7 +327,7 @@ int __init linux_main(int argc, char **argv)if (have_console ==0 )add_arg (DEFAULT_COMMAND_LINE_CONSOLE ); - host_task_size =os_get_top_address (); + host_task_size =os_get_top_address (envp);/* reserve a few pages for the stubs (taking care of data alignment) */ /* align the data portion */ BUILD_BUG_ON (!is_power_of_2 (STUB_DATA_PAGES ));
arch/um/os-Linux/main.c +8 -1
@@ -11,6 +11,7 @@#include <signal.h> #include <string.h> #include <sys/resource.h> +#include <sys/personality.h> #include <as-layout.h> #include <init.h> #include <kern_util.h>
@@ -108,6 +109,12 @@ int __init main(int argc, char **argv, char **envp)char **new_argv;int ret, i, err; +/* Disable randomization and re-exec if it was changed successfully */ + ret =personality (PER_LINUX |ADDR_NO_RANDOMIZE ); +if (ret >=0 && (ret & (PER_LINUX |ADDR_NO_RANDOMIZE )) != + (PER_LINUX |ADDR_NO_RANDOMIZE )) +execve ("/proc/self/exe" , argv, envp); +set_stklim ();setup_env_path ();
@@ -140,7 +147,7 @@ int __init main(int argc, char **argv, char **envp)#endif change_sig (SIGPIPE ,0 ); - ret =linux_main (argc, argv); + ret =linux_main (argc, argv, envp);/* * Disable SIGPROF - I have no idea why libc doesn't do this or turn
arch/x86/um/os-Linux/task_size.c +15 -4
@@ -65,7 +65,7 @@ static int page_ok(unsigned long page)return ok; } -unsigned long os_get_top_address (void ) +unsigned long os_get_top_address (char **envp) {struct sigaction sa, old;unsigned long bottom =0 ;
@@ -142,10 +142,21 @@ unsigned long os_get_top_address(void)#else -unsigned long os_get_top_address (void ) +unsigned long os_get_top_address (char **envp) { -/* The old value of CONFIG_TOP_ADDR */ -return 0x7fc0002000 ; +unsigned long top_addr = (unsigned long ) &top_addr; +int i; + +/* The earliest variable should be after the program name in ELF */ +for (i =0 ; envp[i]; i++) { +if ((unsigned long ) envp[i] > top_addr) + top_addr = (unsigned long ) envp[i]; + } + + top_addr &= ~(UM_KERN_PAGE_SIZE -1 ); + top_addr +=UM_KERN_PAGE_SIZE ; + +return top_addr; }#endif
Signature · 1 line
2.45.2
PATCH v6 7/7 um: Add 4 level page table support
In reply to Benjamin BergFrom: Benjamin Berg <[email protected]>
The larger memory space is useful to support more applications inside UML. One example for this is ASAN instrumentation of userspace applications which requires addresses that would otherwise not be available.
---
v2:
- Do not hide option behind the EXPERT flag
- Fix typo in new "Two-level pagetables" option
--- arch/um/Kconfig | 1 + arch/um/include/asm/page.h | 14 +++- arch/um/include/asm/pgalloc.h | 11 ++- arch/um/include/asm/pgtable-4level.h | 119 +++++++++++++++++++++++++++ arch/um/include/asm/pgtable.h | 6 +- arch/um/kernel/mem.c | 17 +++- arch/x86/um/Kconfig | 38 ++++++--- 7 files changed, 189 insertions(+), 17 deletions(-) create mode 100644 arch/um/include/asm/pgtable-4level.h
arch/um/Kconfig +1 -0
@@ -208,6 +208,7 @@ config MMAPPER config PGTABLE_LEVELS int + default 4 if 4_LEVEL_PGTABLES default 3 if 3_LEVEL_PGTABLES default 2
arch/um/include/asm/page.h +11 -3
@@ -57,14 +57,22 @@ typedef unsigned long long phys_t;typedef struct {unsigned long pte; }pte_t ;typedef struct {unsigned long pgd; }pgd_t ; -#ifdef CONFIG_3_LEVEL_PGTABLES +#if CONFIG_PGTABLE_LEVELS >2 +typedef struct {unsigned long pmd; }pmd_t ;#define pmd_val (x) ((x).pmd)#define __pmd (x) ((pmd_t) { (x) } ) -#endif -#define pte_val (x) ((x).pte) +#if CONFIG_PGTABLE_LEVELS >3 +typedef struct {unsigned long pud; }pud_t ; +#define pud_val (x) ((x).pud) +#define __pud (x) ((pud_t) { (x) } ) + +#endif /* CONFIG_PGTABLE_LEVELS > 3 */ +#endif /* CONFIG_PGTABLE_LEVELS > 2 */ + +#define pte_val (x) ((x).pte)#define pte_get_bits (p, bits) ((p).pte & (bits))#define pte_set_bits (p, bits) ((p).pte |= (bits))
arch/um/include/asm/pgalloc.h +10 -1
@@ -31,7 +31,7 @@ do { \tlb_remove_page_ptdesc ((tlb), (page_ptdesc (pte))); \ } while (0) -#ifdef CONFIG_3_LEVEL_PGTABLES +#if CONFIG_PGTABLE_LEVELS >2 #define __pmd_free_tlb (tlb, pmd, address) \ do { \
@@ -39,6 +39,15 @@ do { \tlb_remove_page_ptdesc ((tlb),virt_to_ptdesc (pmd)); \ } while (0) +#if CONFIG_PGTABLE_LEVELS >3 + +#define __pud_free_tlb (tlb, pud, address) \ +do { \ + pagetable_pud_dtor(virt_to_ptdesc(pud)); \ + tlb_remove_page_ptdesc((tlb), virt_to_ptdesc(pud)); \ +} while (0) + +#endif #endif #endif
arch/um/include/asm/pgtable-4level.h new file +119 -0
119 lines not on this page · raw message
arch/um/include/asm/pgtable.h +4 -2
@@ -24,9 +24,11 @@/* We borrow bit 10 to store the exclusive marker in swap PTEs. */ #define _PAGE_SWP_EXCLUSIVE 0x400 -#ifdef CONFIG_3_LEVEL_PGTABLES +#if CONFIG_PGTABLE_LEVELS ==4 +#include <asm/pgtable-4level.h> +#elif CONFIG_PGTABLE_LEVELS ==3 #include <asm/pgtable-3level.h> -#else +#elif CONFIG_PGTABLE_LEVELS ==2 #include <asm/pgtable-2level.h> #endif
arch/um/kernel/mem.c +16 -1
@@ -99,7 +99,7 @@ static void __init one_page_table_init(pmd_t *pmd)static void __init one_md_table_init (pud_t *pud) { -#ifdef CONFIG_3_LEVEL_PGTABLES +#if CONFIG_PGTABLE_LEVELS >2 pmd_t *pmd_table = (pmd_t *)memblock_alloc_low (PAGE_SIZE ,PAGE_SIZE );if (!pmd_table) panic("%s: Failed to allocate %lu bytes align=%lx\n",
@@ -110,6 +110,19 @@ static void __init one_md_table_init(pud_t *pud)#endif } +static void __init one_ud_table_init (p4d_t *p4d) +{ +#if CONFIG_PGTABLE_LEVELS >3 +pud_t *pud_table = (pud_t *)memblock_alloc_low (PAGE_SIZE ,PAGE_SIZE ); +if (!pud_table) +panic ("%s: Failed to allocate %lu bytes align=%lx\n" , + __func__,PAGE_SIZE ,PAGE_SIZE ); + +set_p4d (p4d,__p4d (_KERNPG_TABLE + (unsigned long )__pa (pud_table))); +BUG_ON (pud_table !=pud_offset (p4d,0 )); +#endif +} +static void __init fixrange_init (unsigned long start,unsigned long end,pgd_t *pgd_base) {
@@ -127,6 +140,8 @@ static void __init fixrange_init(unsigned long start, unsigned long end,for ( ; (i <PTRS_PER_PGD ) && (vaddr < end); pgd++, i++) { p4d =p4d_offset (pgd, vaddr); +if (p4d_none (*p4d)) +one_ud_table_init (p4d); pud =pud_offset (p4d, vaddr);if (pud_none (*pud))one_md_table_init (pud);
arch/x86/um/Kconfig +28 -10
@@ -28,16 +28,34 @@ config X86_64 def_bool 64BIT select MODULES_USE_ELF_RELA -config 3_LEVEL_PGTABLES - bool "Three-level pagetables" if !64BIT - default 64BIT - help - Three-level pagetables will let UML have more than 4G of physical - memory. All the memory that can't be mapped directly will be treated - as high memory. - - However, this it experimental on 32-bit architectures, so if unsure say - N (on x86-64 it's automatically enabled, instead, as it's safe there). +choice + prompt "Pagetable levels" + default 2_LEVEL_PGTABLES if !64BIT + default 4_LEVEL_PGTABLES if 64BIT + + config 2_LEVEL_PGTABLES + bool "Two-level pagetables" if !64BIT + depends on !64BIT + help + Two-level page table for 32-bit architectures. + + config 3_LEVEL_PGTABLES + bool "Three-level pagetables" if 64BIT + help + Three-level pagetables will let UML have more than 4G of physical + memory. All the memory that can't be mapped directly will be treated + as high memory. + + However, this it experimental on 32-bit architectures, so if unsure say + N (on x86-64 it's automatically enabled, instead, as it's safe there). + + config 4_LEVEL_PGTABLES + bool "Four-level pagetables" if 64BIT + depends on 64BIT + help + Four-level pagetables, gives a bigger address space which can be + useful for some applications (e.g. ASAN). +endchoice config ARCH_HAS_SC_SIGNALS def_bool !64BIT
Signature · 1 line
2.45.2
Johannes Berg
maintainerRe: [PATCH v6 7/7] um: Add 4 level page table support
Quoted 11 lines · Benjamin Berg
arch/x86/um/Kconfig +10
-0+choice + prompt "Pagetable levels" + default 2_LEVEL_PGTABLES if !64BIT + default 4_LEVEL_PGTABLES if 64BIT + + config 2_LEVEL_PGTABLES + bool "Two-level pagetables" if !64BIT + depends on !64BIT + help + Two-level page table for 32-bit architectures.
arch/x86/um/Kconfig config X86_64 · line 50
Quoted 10 lines
arch/x86/um/Kconfig +10
-0+ + config 3_LEVEL_PGTABLES + bool "Three-level pagetables" if 64BIT + help + Three-level pagetables will let UML have more than 4G of physical + memory. All the memory that can't be mapped directly will be treated + as high memory. + + However, this it experimental on 32-bit architectures, so if unsure say + N (on x86-64 it's automatically enabled, instead, as it's safe there).
You copied this but it's not actually true any more - three-level is never default now.
johannes