arm-bsp/corstone1000: Update Corstone-1000 user guide
PATCH 1/1 arm-bsp/corstone1000: Update Corstone-1000 user guide
From: Delane Brandy <[email protected]>
Update the Corstone-1000 user guide with the new instructions on how to rebuild the platform to enable multicore support and run a test to verify this.
Signed-off-by Delane Brandy <[email protected]>
--- .../documentation/corstone1000/user-guide.rst | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+)
meta-arm-bsp/documentation/corstone1000/user-guide.rst +27 -0
@@ -1458,6 +1458,33 @@ The external system can be switched on/off on demand with the following commands echo start > /sys/class/remoteproc/remoteproc0/state + +Testing FVP in SMP mode +----------------------- + +Symmetric multiprocessing (SMP) mode is only supported on FVP. It can be enabled by using `corstone1000-fvp-multicore.yml` + +1. Rebuild the platform with SMP mode enabled: + +:: + + kas build meta-arm/kas/corstone1000-fvp.yml:meta-arm/ci/debug.yml:meta-arm/kas/corstone1000-fvp-multicore.yml + +2. Once rebuilt, boot the platform with SMP mode enabled: + +:: + + kas shell meta-arm/kas/corstone1000-fvp.yml:meta-arm/ci/debug.yml:meta-arm/kas/corstone1000-fvp-multicore.yml -c "../meta-arm/scripts/runfvp" + + +3. Validating SMP mode using the nproc command which should return the number of cores: + +:: + + nproc + #output: 4 + + Tests results -------------
Jon Mason
AppliedQuoted 5 lines · On Thu, 04 Jul 2024 10:49:52 +0100, [email protected] wrote:
Update the Corstone-1000 user guide with the new instructions on how to rebuild the platform to enable multicore support and run a test to verify this.
Applied, thanks!
[1/1] arm-bsp/corstone1000: Update Corstone-1000 user guide
commit: 61f5a0b1b6ec6024c1e43d2811c234dc5dbf9200
Best regards,
Signature · 1 line
Jon Mason <[email protected]>