Skip to contentSkip to conversation

workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string

PATCH In review Sasha Levin 3 participants 43 messages Jul 9, 2024 – Jul 22, 2024

Subsystems (12)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/40 workqueue: Refactor worker ID formatting and make wq_worker_comm() use full ID string

From: Tejun Heo <[email protected]>

[ Upstream commit 2a1b02bcba78f8498ab00d6142e1238d85b01591 ]

Currently, worker ID formatting is open coded in create_worker(), init_rescuer() and worker_thread() (for %WORKER_DIE case). The formatted ID is saved into task->comm and wq_worker_comm() uses it as the base name to append extra information to when generating the name to be shown to userspace.

However, TASK_COMM_LEN is only 16 leading to badly truncated names for rescuers. For example, the rescuer for the inet_frag_wq workqueue becomes:

  $ ps -ef | grep '[k]worker/R-inet'
  root         483       2  0 Apr26 ?        00:00:00 [kworker/R-inet_]

Even for non-rescue workers, it's easy to run over 15 characters on moderately large machines.

Fit it by consolidating worker ID formatting into a new helper format_worker_id() and calling it from wq_worker_comm() to obtain the untruncated worker ID string.

  $ ps -ef | grep '[k]worker/R-inet'
  root          60       2  0 12:10 ?        00:00:00 [kworker/R-inet_frag_wq]
---
 kernel/workqueue.c | 51 ++++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 17 deletions(-)
kernel/workqueue.c +34 -17
index d2dbe099286b9..7634fc32ee05a 100644
@@ -124,6 +124,7 @@ enum wq_internal_consts {
 	HIGHPRI_NICE_LEVEL	= MIN_NICE,
 
 	WQ_NAME_LEN		= 32,
+	WORKER_ID_LEN		= 10 + WQ_NAME_LEN, /* "kworker/R-" + WQ_NAME_LEN */
 };
 
 /*
@@ -2778,6 +2779,26 @@ static void worker_detach_from_pool(struct worker *worker)
 		complete(detach_completion);
 }
 
+static int format_worker_id(char *buf, size_t size, struct worker *worker,
+			    struct worker_pool *pool)
+{
+	if (worker->rescue_wq)
+		return scnprintf(buf, size, "kworker/R-%s",
+				 worker->rescue_wq->name);
+
+	if (pool) {
+		if (pool->cpu >= 0)
+			return scnprintf(buf, size, "kworker/%d:%d%s",
+					 pool->cpu, worker->id,
+					 pool->attrs->nice < 0  ? "H" : "");
+		else
+			return scnprintf(buf, size, "kworker/u%d:%d",
+					 pool->id, worker->id);
+	} else {
+		return scnprintf(buf, size, "kworker/dying");
+	}
+}
+
 /**
  * create_worker - create a new workqueue worker
  * @pool: pool the new worker will belong to
@@ -2794,7 +2815,6 @@ static struct worker *create_worker(struct worker_pool *pool)
 {
 	struct worker *worker;
 	int id;
-	char id_buf[23];
 
 	/* ID is needed to determine kthread name */
 	id = ida_alloc(&pool->worker_ida, GFP_KERNEL);
@@ -2813,17 +2833,14 @@ static struct worker *create_worker(struct worker_pool *pool)
 	worker->id = id;
 
 	if (!(pool->flags & POOL_BH)) {
-		if (pool->cpu >= 0)
-			snprintf(id_buf, sizeof(id_buf), "%d:%d%s", pool->cpu, id,
-				 pool->attrs->nice < 0  ? "H" : "");
-		else
-			snprintf(id_buf, sizeof(id_buf), "u%d:%d", pool->id, id);
+		char id_buf[WORKER_ID_LEN];
 
+		format_worker_id(id_buf, sizeof(id_buf), worker, pool);
 		worker->task = kthread_create_on_node(worker_thread, worker,
-					pool->node, "kworker/%s", id_buf);
+						      pool->node, "%s", id_buf);
 		if (IS_ERR(worker->task)) {
 			if (PTR_ERR(worker->task) == -EINTR) {
-				pr_err("workqueue: Interrupted when creating a worker thread \"kworker/%s\"\n",
+				pr_err("workqueue: Interrupted when creating a worker thread \"%s\"\n",
 				       id_buf);
 			} else {
 				pr_err_once("workqueue: Failed to create a worker thread: %pe",
@@ -3386,7 +3403,6 @@ static int worker_thread(void *__worker)
 		raw_spin_unlock_irq(&pool->lock);
 		set_pf_worker(false);
 
-		set_task_comm(worker->task, "kworker/dying");
 		ida_free(&pool->worker_ida, worker->id);
 		worker_detach_from_pool(worker);
 		WARN_ON_ONCE(!list_empty(&worker->entry));
@@ -5430,6 +5446,7 @@ static int wq_clamp_max_active(int max_active, unsigned int flags,
 static int init_rescuer(struct workqueue_struct *wq)
 {
 	struct worker *rescuer;
+	char id_buf[WORKER_ID_LEN];
 	int ret;
 
 	if (!(wq->flags & WQ_MEM_RECLAIM))
@@ -5443,7 +5460,9 @@ static int init_rescuer(struct workqueue_struct *wq)
 	}
 
 	rescuer->rescue_wq = wq;
-	rescuer->task = kthread_create(rescuer_thread, rescuer, "kworker/R-%s", wq->name);
+	format_worker_id(id_buf, sizeof(id_buf), rescuer, NULL);
+
+	rescuer->task = kthread_create(rescuer_thread, rescuer, "%s", id_buf);
 	if (IS_ERR(rescuer->task)) {
 		ret = PTR_ERR(rescuer->task);
 		pr_err("workqueue: Failed to create a rescuer kthread for wq \"%s\": %pe",
@@ -6272,19 +6291,15 @@ void show_freezable_workqueues(void)
 /* used to show worker information through /proc/PID/{comm,stat,status} */
 void wq_worker_comm(char *buf, size_t size, struct task_struct *task)
 {
-	int off;
-
-	/* always show the actual comm */
-	off = strscpy(buf, task->comm, size);
-	if (off < 0)
-		return;
-
 	/* stabilize PF_WQ_WORKER and worker pool association */
 	mutex_lock(&wq_pool_attach_mutex);
 
 	if (task->flags & PF_WQ_WORKER) {
 		struct worker *worker = kthread_data(task);
 		struct worker_pool *pool = worker->pool;
+		int off;
+
+		off = format_worker_id(buf, size, worker, pool);
 
 		if (pool) {
 			raw_spin_lock_irq(&pool->lock);
@@ -6303,6 +6318,8 @@ void wq_worker_comm(char *buf, size_t size, struct task_struct *task)
 			}
 			raw_spin_unlock_irq(&pool->lock);
 		}
+	} else {
+		strscpy(buf, task->comm, size);
 	}
 
 	mutex_unlock(&wq_pool_attach_mutex);
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH 2/40 Input: elantech - fix touchpad state on resume for Lenovo N24

From: Jonathan Denose <[email protected]>

[ Upstream commit a69ce592cbe0417664bc5a075205aa75c2ec1273 ]

The Lenovo N24 on resume becomes stuck in a state where it sends incorrect packets, causing elantech_packet_check_v4 to fail. The only way for the device to resume sending the correct packets is for it to be disabled and then re-enabled.

This change adds a dmi check to trigger this behavior on resume.

---
 drivers/input/mouse/elantech.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
drivers/input/mouse/elantech.c +31 -0
index 4e38229404b4b..b4723ea395eb9 100644
@@ -1476,16 +1476,47 @@ static void elantech_disconnect(struct psmouse *psmouse)
 	psmouse->private = NULL;
 }
 
+/*
+ * Some hw_version 4 models fail to properly activate absolute mode on
+ * resume without going through disable/enable cycle.
+ */
+static const struct dmi_system_id elantech_needs_reenable[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		/* Lenovo N24 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
+		},
+	},
+#endif
+	{ }
+};
+
 /*
  * Put the touchpad back into absolute mode when reconnecting
  */
 static int elantech_reconnect(struct psmouse *psmouse)
 {
+	int err;
+
 	psmouse_reset(psmouse);
 
 	if (elantech_detect(psmouse, 0))
 		return -1;
 
+	if (dmi_check_system(elantech_needs_reenable)) {
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to deactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+
+		err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
+		if (err)
+			psmouse_warn(psmouse, "failed to reactivate mouse on %s: %d\n",
+				     psmouse->ps2dev.serio->phys, err);
+	}
+
 	if (elantech_set_absolute_mode(psmouse)) {
 		psmouse_err(psmouse,
 			    "failed to put touchpad back into absolute mode.\n");
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH 3/40 Input: i8042 - add Ayaneo Kun to i8042 quirk table

In reply to Sasha Levin

From: Tobias Jakobi <[email protected]>

[ Upstream commit 955af6355ddfe35140f9706a635838212a32513b ]

See the added comment for details. Also fix a typo in the quirk's define.

---
 drivers/input/serio/i8042-acpipnpio.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
drivers/input/serio/i8042-acpipnpio.h +16 -2
index dfc6c581873b7..5b50475ec4140 100644
@@ -76,7 +76,7 @@ static inline void i8042_write_command(int val)
 #define SERIO_QUIRK_PROBE_DEFER		BIT(5)
 #define SERIO_QUIRK_RESET_ALWAYS	BIT(6)
 #define SERIO_QUIRK_RESET_NEVER		BIT(7)
-#define SERIO_QUIRK_DIECT		BIT(8)
+#define SERIO_QUIRK_DIRECT		BIT(8)
 #define SERIO_QUIRK_DUMBKBD		BIT(9)
 #define SERIO_QUIRK_NOLOOP		BIT(10)
 #define SERIO_QUIRK_NOTIMEOUT		BIT(11)
@@ -1332,6 +1332,20 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		.driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
 					SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
 	},
+	{
+		/*
+		 * The Ayaneo Kun is a handheld device where some the buttons
+		 * are handled by an AT keyboard. The keyboard is usually
+		 * detected as raw, but sometimes, usually after a cold boot,
+		 * it is detected as translated. Make sure that the keyboard
+		 * is always in raw mode.
+		 */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_MATCH(DMI_BOARD_NAME, "KUN"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_DIRECT)
+	},
 	{ }
 };
 
@@ -1655,7 +1669,7 @@ static void __init i8042_check_quirks(void)
 		if (quirks & SERIO_QUIRK_RESET_NEVER)
 			i8042_reset = I8042_RESET_NEVER;
 	}
-	if (quirks & SERIO_QUIRK_DIECT)
+	if (quirks & SERIO_QUIRK_DIRECT)
 		i8042_direct = true;
 	if (quirks & SERIO_QUIRK_DUMBKBD)
 		i8042_dumbkbd = true;
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH 4/40 ASoC: rt722-sdca-sdw: add silence detection register as volatile

In reply to Sasha Levin

From: Jack Yu <[email protected]>

[ Upstream commit 968c974c08106fcf911d8d390d0f049af855d348 ]

Including silence detection register as volatile.

---
 sound/soc/codecs/rt722-sdca-sdw.c | 2 ++
 1 file changed, 2 insertions(+)
sound/soc/codecs/rt722-sdca-sdw.c +2 -0
index 65d584c1886e8..0a14198f8a424 100644
@@ -68,6 +68,7 @@ static bool rt722_sdca_mbq_readable_register(struct device *dev, unsigned int re
 	case 0x200007f:
 	case 0x2000082 ... 0x200008e:
 	case 0x2000090 ... 0x2000094:
+	case 0x3110000:
 	case 0x5300000 ... 0x5300002:
 	case 0x5400002:
 	case 0x5600000 ... 0x5600007:
@@ -125,6 +126,7 @@ static bool rt722_sdca_mbq_volatile_register(struct device *dev, unsigned int re
 	case 0x2000067:
 	case 0x2000084:
 	case 0x2000086:
+	case 0x3110000:
 		return true;
 	default:
 		return false;
Signature · 1 line
2.43.0
author maintainer
#4 lore raw

PATCH 5/40 ASoC: codecs: ES8326: Solve headphone detection issue

In reply to Sasha Levin

From: Zhang Yi <[email protected]>

[ Upstream commit b7c40988808f8d7426dee1e4d96a4e204de4a8bc ]

When switching between OMTP and CTIA headset, we can hear pop noise. To solve this issue, We modified the configuration for headphone detection

---
 sound/soc/codecs/es8326.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
sound/soc/codecs/es8326.c +6 -2
index 17bd6b5160772..8b2328d5d0c74 100644
@@ -865,12 +865,16 @@ static void es8326_jack_detect_handler(struct work_struct *work)
 			 * set auto-check mode, then restart jack_detect_work after 400ms.
 			 * Don't report jack status.
 			 */
-			regmap_write(es8326->regmap, ES8326_INT_SOURCE,
-					(ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON));
+			regmap_write(es8326->regmap, ES8326_INT_SOURCE, 0x00);
 			regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x01);
+			regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x00);
 			es8326_enable_micbias(es8326->component);
 			usleep_range(50000, 70000);
 			regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x03, 0x00);
+			regmap_update_bits(es8326->regmap, ES8326_HPDET_TYPE, 0x10, 0x10);
+			usleep_range(50000, 70000);
+			regmap_write(es8326->regmap, ES8326_INT_SOURCE,
+					(ES8326_INT_SRC_PIN9 | ES8326_INT_SRC_BUTTON));
 			regmap_write(es8326->regmap, ES8326_SYS_BIAS, 0x1f);
 			regmap_update_bits(es8326->regmap, ES8326_HP_DRIVER_REF, 0x0f, 0x08);
 			queue_delayed_work(system_wq, &es8326->jack_detect_work,
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

PATCH 6/40 Input: xpad - add support for ASUS ROG RAIKIRI PRO

In reply to Sasha Levin

From: "Luke D. Jones" <[email protected]>

[ Upstream commit cee77149ebe9cd971ba238d87aa10e09bd98f1c9 ]

Add the VID/PID for ASUS ROG RAIKIRI PRO to the list of known devices.

---
 drivers/input/joystick/xpad.c | 1 +
 1 file changed, 1 insertion(+)
drivers/input/joystick/xpad.c +1 -0
index 6fadaddb2b908..3a5af0909233a 100644
@@ -209,6 +209,7 @@ static const struct xpad_device {
 	{ 0x0738, 0xf738, "Super SFIV FightStick TE S", 0, XTYPE_XBOX360 },
 	{ 0x07ff, 0xffff, "Mad Catz GamePad", 0, XTYPE_XBOX360 },
 	{ 0x0b05, 0x1a38, "ASUS ROG RAIKIRI", 0, XTYPE_XBOXONE },
+	{ 0x0b05, 0x1abb, "ASUS ROG RAIKIRI PRO", 0, XTYPE_XBOXONE },
 	{ 0x0c12, 0x0005, "Intec wireless", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8801, "Nyko Xbox Controller", 0, XTYPE_XBOX },
 	{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
Signature · 1 line
2.43.0
author maintainer
#6 lore raw

PATCH 7/40 ASoC: topology: Fix references to freed memory

In reply to Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 97ab304ecd95c0b1703ff8c8c3956dc6e2afe8e1 ]

Most users after parsing a topology file, release memory used by it, so having pointer references directly into topology file contents is wrong. Use devm_kmemdup(), to allocate memory as needed.

---
 sound/soc/soc-topology.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)
sound/soc/soc-topology.c +22 -5
index ba4890991f0d7..7add1dbf1d214 100644
@@ -1060,15 +1060,32 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 			break;
 		}
 
-		route->source = elem->source;
-		route->sink = elem->sink;
+		route->source = devm_kmemdup(tplg->dev, elem->source,
+					     min(strlen(elem->source),
+						 SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+					     GFP_KERNEL);
+		route->sink = devm_kmemdup(tplg->dev, elem->sink,
+					   min(strlen(elem->sink), SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+					   GFP_KERNEL);
+		if (!route->source || !route->sink) {
+			ret = -ENOMEM;
+			break;
+		}
 
 		/* set to NULL atm for tplg users */
 		route->connected = NULL;
-		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == 0)
+		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == 0) {
 			route->control = NULL;
-		else
-			route->control = elem->control;
+		} else {
+			route->control = devm_kmemdup(tplg->dev, elem->control,
+						      min(strlen(elem->control),
+							  SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+						      GFP_KERNEL);
+			if (!route->control) {
+				ret = -ENOMEM;
+				break;
+			}
+		}
 
 		/* add route dobj to dobj_list */
 		route->dobj.type = SND_SOC_DOBJ_GRAPH;
Signature · 1 line
2.43.0
author maintainer
#7 lore raw

PATCH 8/40 ASoC: Intel: avs: Fix route override

In reply to Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit fd660b1bd015e5aa9a558ee04088f2431010548d ]

Instead of overriding existing memory strings that may be too short, just allocate needed memory and point the route at it.

---
 sound/soc/intel/avs/topology.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
sound/soc/intel/avs/topology.c +15 -4
index 42b42903ae9de..691d16ce95a0f 100644
@@ -1545,8 +1545,8 @@ static int avs_route_load(struct snd_soc_component *comp, int index,
 {
 	struct snd_soc_acpi_mach *mach = dev_get_platdata(comp->card->dev);
 	size_t len = SNDRV_CTL_ELEM_ID_NAME_MAXLEN;
-	char buf[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
 	int ssp_port, tdm_slot;
+	char *buf;
 
 	/* See parse_link_formatted_string() for dynamic naming when(s). */
 	if (!avs_mach_singular_ssp(mach))
@@ -1557,13 +1557,24 @@ static int avs_route_load(struct snd_soc_component *comp, int index,
 		return 0;
 	tdm_slot = avs_mach_ssp_tdm(mach, ssp_port);
 
+	buf = devm_kzalloc(comp->card->dev, len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 	avs_ssp_sprint(buf, len, route->source, ssp_port, tdm_slot);
-	strscpy((char *)route->source, buf, len);
+	route->source = buf;
+
+	buf = devm_kzalloc(comp->card->dev, len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 	avs_ssp_sprint(buf, len, route->sink, ssp_port, tdm_slot);
-	strscpy((char *)route->sink, buf, len);
+	route->sink = buf;
+
 	if (route->control) {
+		buf = devm_kzalloc(comp->card->dev, len, GFP_KERNEL);
+		if (!buf)
+			return -ENOMEM;
 		avs_ssp_sprint(buf, len, route->control, ssp_port, tdm_slot);
-		strscpy((char *)route->control, buf, len);
+		route->control = buf;
 	}
 
 	return 0;
Signature · 1 line
2.43.0
author maintainer
#8 lore raw

PATCH 9/40 ASoC: topology: Do not assign fields that are already set

In reply to Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit daf0b99d4720c9f05bdb81c73b2efdb43fa9def3 ]

The routes are allocated with kzalloc(), so all fields are zeroed by default, skip unnecessary assignments.

---
 sound/soc/soc-topology.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
sound/soc/soc-topology.c +1 -5
index 7add1dbf1d214..ce22613bf9690 100644
@@ -1072,11 +1072,7 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 			break;
 		}
 
-		/* set to NULL atm for tplg users */
-		route->connected = NULL;
-		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) == 0) {
-			route->control = NULL;
-		} else {
+		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) != 0) {
 			route->control = devm_kmemdup(tplg->dev, elem->control,
 						      min(strlen(elem->control),
 							  SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
Signature · 1 line
2.43.0
author maintainer
#9 lore raw

PATCH 10/40 ASoC: topology: Clean up route loading

In reply to Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit e0e7bc2cbee93778c4ad7d9a792d425ffb5af6f7 ]

Instead of using very long macro name, assign it to shorter variable and use it instead. While doing that, we can reduce multiple if checks using this define to one.

---
 sound/soc/soc-topology.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)
sound/soc/soc-topology.c +8 -18
index ce22613bf9690..52752e0a5dc27 100644
@@ -1021,6 +1021,7 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 	struct snd_soc_tplg_hdr *hdr)
 {
 	struct snd_soc_dapm_context *dapm = &tplg->comp->dapm;
+	const size_t maxlen = SNDRV_CTL_ELEM_ID_NAME_MAXLEN;
 	struct snd_soc_tplg_dapm_graph_elem *elem;
 	struct snd_soc_dapm_route *route;
 	int count, i;
@@ -1044,38 +1045,27 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 		tplg->pos += sizeof(struct snd_soc_tplg_dapm_graph_elem);
 
 		/* validate routes */
-		if (strnlen(elem->source, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) ==
-			    SNDRV_CTL_ELEM_ID_NAME_MAXLEN) {
-			ret = -EINVAL;
-			break;
-		}
-		if (strnlen(elem->sink, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) ==
-			    SNDRV_CTL_ELEM_ID_NAME_MAXLEN) {
-			ret = -EINVAL;
-			break;
-		}
-		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) ==
-			    SNDRV_CTL_ELEM_ID_NAME_MAXLEN) {
+		if ((strnlen(elem->source, maxlen) == maxlen) ||
+		    (strnlen(elem->sink, maxlen) == maxlen) ||
+		    (strnlen(elem->control, maxlen) == maxlen)) {
 			ret = -EINVAL;
 			break;
 		}
 
 		route->source = devm_kmemdup(tplg->dev, elem->source,
-					     min(strlen(elem->source),
-						 SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+					     min(strlen(elem->source), maxlen),
 					     GFP_KERNEL);
 		route->sink = devm_kmemdup(tplg->dev, elem->sink,
-					   min(strlen(elem->sink), SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+					   min(strlen(elem->sink), maxlen),
 					   GFP_KERNEL);
 		if (!route->source || !route->sink) {
 			ret = -ENOMEM;
 			break;
 		}
 
-		if (strnlen(elem->control, SNDRV_CTL_ELEM_ID_NAME_MAXLEN) != 0) {
+		if (strnlen(elem->control, maxlen) != 0) {
 			route->control = devm_kmemdup(tplg->dev, elem->control,
-						      min(strlen(elem->control),
-							  SNDRV_CTL_ELEM_ID_NAME_MAXLEN),
+						      min(strlen(elem->control), maxlen),
 						      GFP_KERNEL);
 			if (!route->control) {
 				ret = -ENOMEM;
Signature · 1 line
2.43.0
author maintainer
#12 lore raw

PATCH 11/40 bytcr_rt5640 : inverse jack detect for Archos 101 cesium

In reply to Sasha Levin

From: Thomas GENTY <[email protected]>

[ Upstream commit e3209a1827646daaab744aa6a5767b1f57fb5385 ]

When headphones are plugged in, they appear absent; when they are removed, they appear present.
Add a specific entry in bytcr_rt5640 for this device

---
 sound/soc/intel/boards/bytcr_rt5640.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
sound/soc/intel/boards/bytcr_rt5640.c +11 -0
index b41a1147f1c34..a64d1989e28a5 100644
@@ -610,6 +610,17 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = {
 					BYT_RT5640_SSP0_AIF1 |
 					BYT_RT5640_MCLK_EN),
 	},
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "ARCHOS 101 CESIUM"),
+		},
+		.driver_data = (void *)(BYTCR_INPUT_DEFAULTS |
+					BYT_RT5640_JD_NOT_INV |
+					BYT_RT5640_DIFF_MIC |
+					BYT_RT5640_SSP0_AIF1 |
+					BYT_RT5640_MCLK_EN),
+	},
 	{
 		.matches = {
 			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ARCHOS"),
Signature · 1 line
2.43.0
author maintainer
#13 lore raw

PATCH 12/40 ALSA: dmaengine: Synchronize dma channel after drop()

In reply to Sasha Levin

From: Jai Luthra <[email protected]>

[ Upstream commit e8343410ddf08fc36a9b9cc7c51a4e53a262d4c6 ]

Sometimes the stream may be stopped due to XRUN events, in which case the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and start the stream again.

In these cases, we must wait for the DMA channel to synchronize before marking the stream as prepared for playback, as the DMA channel gets stopped by drop() without any synchronization. Make sure the ALSA core synchronizes the DMA channel by adding a sync_stop() hook.

---
 include/sound/dmaengine_pcm.h         |  1 +
 sound/core/pcm_dmaengine.c            | 10 ++++++++++
 sound/soc/soc-generic-dmaengine-pcm.c |  8 ++++++++
 3 files changed, 19 insertions(+)
include/sound/dmaengine_pcm.h +1 -0
index d70c55f17df7c..94dbb23580f2f 100644
@@ -36,6 +36,7 @@ snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream
 int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
 	struct dma_chan *chan);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream);
 
 int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 	dma_filter_fn filter_fn, void *filter_data);
sound/core/pcm_dmaengine.c +10 -0
index 494ec0c207fad..d142609570347 100644
@@ -349,6 +349,16 @@ int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
 }
 EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan);
 
+int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream)
+{
+	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+
+	dmaengine_synchronize(prtd->dma_chan);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
+
 /**
  * snd_dmaengine_pcm_close - Close a dmaengine based PCM substream
  * @substream: PCM substream
sound/soc/soc-generic-dmaengine-pcm.c +8 -0
index 092ca09f36319..7fa75b55c65e2 100644
@@ -318,6 +318,12 @@ static int dmaengine_copy(struct snd_soc_component *component,
 	return 0;
 }
 
+static int dmaengine_pcm_sync_stop(struct snd_soc_component *component,
+				   struct snd_pcm_substream *substream)
+{
+	return snd_dmaengine_pcm_sync_stop(substream);
+}
+
 static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.name		= SND_DMAENGINE_PCM_DRV_NAME,
 	.probe_order	= SND_SOC_COMP_ORDER_LATE,
@@ -327,6 +333,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component = {
 	.trigger	= dmaengine_pcm_trigger,
 	.pointer	= dmaengine_pcm_pointer,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
@@ -339,6 +346,7 @@ static const struct snd_soc_component_driver dmaengine_pcm_component_process = {
 	.pointer	= dmaengine_pcm_pointer,
 	.copy		= dmaengine_copy,
 	.pcm_construct	= dmaengine_pcm_new,
+	.sync_stop	= dmaengine_pcm_sync_stop,
 };
 
 static const char * const dmaengine_pcm_dma_channel_names[] = {
Signature · 1 line
2.43.0
author maintainer
#14 lore raw

PATCH 13/40 ASoC: ti: davinci-mcasp: Set min period size using FIFO config

In reply to Sasha Levin

From: Jai Luthra <[email protected]>

[ Upstream commit c5dcf8ab10606e76c1d8a0ec77f27d84a392e874 ]

The minimum period size was enforced to 64 as older devices integrating McASP with EDMA used an internal FIFO of 64 samples.

With UDMA based platforms this internal McASP FIFO is optional, as the DMA engine internally does some buffering which is already accounted for when registering the platform. So we should read the actual FIFO configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to 64.

---
 sound/soc/ti/davinci-mcasp.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
sound/soc/ti/davinci-mcasp.c +7 -2
index 1e760c3155213..2b1ed91a736c9 100644
@@ -1472,10 +1472,11 @@ static int davinci_mcasp_hw_rule_min_periodsize(
 {
 	struct snd_interval *period_size = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_PERIOD_SIZE);
+	u8 numevt = *((u8 *)rule->private);
 	struct snd_interval frames;
 
 	snd_interval_any(&frames);
-	frames.min = 64;
+	frames.min = numevt;
 	frames.integer = 1;
 
 	return snd_interval_refine(period_size, &frames);
@@ -1490,6 +1491,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 	u32 max_channels = 0;
 	int i, dir, ret;
 	int tdm_slots = mcasp->tdm_slots;
+	u8 *numevt;
 
 	/* Do not allow more then one stream per direction */
 	if (mcasp->substreams[substream->stream])
@@ -1589,9 +1591,12 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
 			return ret;
 	}
 
+	numevt = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			 &mcasp->txnumevt :
+			 &mcasp->rxnumevt;
 	snd_pcm_hw_rule_add(substream->runtime, 0,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
-			    davinci_mcasp_hw_rule_min_periodsize, NULL,
+			    davinci_mcasp_hw_rule_min_periodsize, numevt,
 			    SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1);
 
 	return 0;
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH 14/40 ASoC: ti: omap-hdmi: Fix too long driver name

In reply to Sasha Levin

From: Primoz Fiser <[email protected]>

[ Upstream commit 524d3f126362b6033e92cbe107ae2158d7fbff94 ]

Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages:

ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e'

---
 sound/soc/ti/omap-hdmi.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
sound/soc/ti/omap-hdmi.c +1 -5
index 4513b527ab970..ad8925b6481ca 100644
@@ -354,11 +354,7 @@ static int omap_hdmi_audio_probe(struct platform_device *pdev)
 	if (!card)
 		return -ENOMEM;
 
-	card->name = devm_kasprintf(dev, GFP_KERNEL,
-				    "HDMI %s", dev_name(ad->dssdev));
-	if (!card->name)
-		return -ENOMEM;
-
+	card->name = "HDMI";
 	card->owner = THIS_MODULE;
 	card->dai_link =
 		devm_kzalloc(dev, sizeof(*(card->dai_link)), GFP_KERNEL);
Signature · 1 line
2.43.0
author maintainer
#16 lore raw

PATCH 15/40 ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollback

In reply to Sasha Levin

From: Peter Ujfalusi <[email protected]>

[ Upstream commit 6f2a43e3d14f6e31a3b041a1043195d02c54d615 ]

If the ipc_prepare() callback fails for a module instance, on error rewind we must skip the ipc_unprepare() call for ones that has positive use count.

The positive use count means that the module instance is in active use, it cannot be unprepared.

The issue affects capture direction paths with branches (single dai with multiple PCMs), the affected widgets are in the shared part of the paths.

---
 sound/soc/sof/sof-audio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/sof/sof-audio.c +1 -1
index e693dcb475e4d..d1a7d867f6a3a 100644
@@ -485,7 +485,7 @@ sof_prepare_widgets_in_path(struct snd_sof_dev *sdev, struct snd_soc_dapm_widget
 			if (ret < 0) {
 				/* unprepare the source widget */
 				if (widget_ops[widget->id].ipc_unprepare &&
-				    swidget && swidget->prepared) {
+				    swidget && swidget->prepared && swidget->use_count == 0) {
 					widget_ops[widget->id].ipc_unprepare(swidget);
 					swidget->prepared = false;
 				}
Signature · 1 line
2.43.0
author maintainer
#17 lore raw

PATCH 16/40 ASoC: rt722-sdca-sdw: add debounce time for type detection

In reply to Sasha Levin

From: Jack Yu <[email protected]>

[ Upstream commit f3b198e4788fcc8d03ed0c8bd5e3856c6a5760c5 ]

Add debounce time in headset type detection for better performance.

---
 sound/soc/codecs/rt722-sdca-sdw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/rt722-sdca-sdw.c +1 -1
index 0a14198f8a424..543a3fa1f5d3c 100644
@@ -352,7 +352,7 @@ static int rt722_sdca_interrupt_callback(struct sdw_slave *slave,
 
 	if (status->sdca_cascade && !rt722->disable_irq)
 		mod_delayed_work(system_power_efficient_wq,
-			&rt722->jack_detect_work, msecs_to_jiffies(30));
+			&rt722->jack_detect_work, msecs_to_jiffies(280));
 
 	mutex_unlock(&rt722->disable_irq_lock);
 
Signature · 1 line
2.43.0
author maintainer
#18 lore raw

PATCH 17/40 ASoC: topology: Fix route memory corruption

In reply to Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit 0298f51652be47b79780833e0b63194e1231fa34 ]

It was reported that recent fix for memory corruption during topology load, causes corruption in other cases. Instead of being overeager with checking topology, assume that it is properly formatted and just duplicate strings.

---
 sound/soc/soc-topology.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
sound/soc/soc-topology.c +3 -9
index 52752e0a5dc27..27aba69894b17 100644
@@ -1052,21 +1052,15 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 			break;
 		}
 
-		route->source = devm_kmemdup(tplg->dev, elem->source,
-					     min(strlen(elem->source), maxlen),
-					     GFP_KERNEL);
-		route->sink = devm_kmemdup(tplg->dev, elem->sink,
-					   min(strlen(elem->sink), maxlen),
-					   GFP_KERNEL);
+		route->source = devm_kstrdup(tplg->dev, elem->source, GFP_KERNEL);
+		route->sink = devm_kstrdup(tplg->dev, elem->sink, GFP_KERNEL);
 		if (!route->source || !route->sink) {
 			ret = -ENOMEM;
 			break;
 		}
 
 		if (strnlen(elem->control, maxlen) != 0) {
-			route->control = devm_kmemdup(tplg->dev, elem->control,
-						      min(strlen(elem->control), maxlen),
-						      GFP_KERNEL);
+			route->control = devm_kstrdup(tplg->dev, elem->control, GFP_KERNEL);
 			if (!route->control) {
 				ret = -ENOMEM;
 				break;
Signature · 1 line
2.43.0
author maintainer
#19 lore raw

PATCH 18/40 ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked up

In reply to Sasha Levin

From: Richard Fitzgerald <[email protected]>

[ Upstream commit 8af49868e51ed1ba117b74728af12abe1eda82e5 ]

If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer sources should be initialized to disconnected. There aren't currently any available products using the ASP so this doesn't affect any existing systems.

The cs35l56 does not have any fixed default for the mixer source registers. When the cs35l56 boots, its firmware patches these registers to setup a system-specific routing; this is so that Windows can use generic SDCA drivers instead of needing knowledge of chip-specific registers. The setup varies between end-products, which each have customized firmware, and so the default register state varies between end-products. It can also change if the firmware on an end-product is upgraded - for example if a change was needed to the routing for Windows use-cases. It must be emphasized that the settings applied by the firmware are not internal magic tuning; they are statically implementing use-case setup that on Linux would be done via ALSA controls.

The driver is currently syncing the mixer controls with whatever initial state the firmware wrote to the registers, so that they report the actual audio routing. But if the ASP DAI is hooked up this can create a powered-up DAPM graph without anything intentionally setting up a path. This can lead to parts of the audio system powering up unexpectedly.

For example when cs35l56 is connected to cs42l43 using a codec-codec link, this can create a complete DAPM graph which then powers-up cs42l43. But the cs42l43 can only be clocked from its SoundWire bus so this causes a bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up without a clock.

If the host is taking ownership of the ASP (either directly or as a codec-to-codec link) there is no need to keep the mixer settings that the firmware wrote. The driver has ALSA controls for setting these using standard Linux mechanisms. So if the machine driver hooks up the ASP the ASP mixers are initialized to "None" (no input). This prevents unintended DAPM-graph power-ups, and means the initial state of the mixers is always going to be None.

Since the initial state of the mixers can vary from system to system and potentially between firmware upgrades, no use-case manager can currently assume that cs35l56 has a known initial state. The firmware could just as easily default them to "None" as to any input source. So defaulting them to "None" in the driver is not increasing the entropy of the system.

---
 sound/soc/codecs/cs35l56-shared.c | 4 ++++
 1 file changed, 4 insertions(+)
sound/soc/codecs/cs35l56-shared.c +4 -0
index fd02b621da52c..d29878af2a80d 100644
@@ -214,6 +214,10 @@ static const struct reg_sequence cs35l56_asp1_defaults[] = {
 	REG_SEQ0(CS35L56_ASP1_FRAME_CONTROL5,	0x00020100),
 	REG_SEQ0(CS35L56_ASP1_DATA_CONTROL1,	0x00000018),
 	REG_SEQ0(CS35L56_ASP1_DATA_CONTROL5,	0x00000018),
+	REG_SEQ0(CS35L56_ASP1TX1_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX2_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX3_INPUT,		0x00000000),
+	REG_SEQ0(CS35L56_ASP1TX4_INPUT,		0x00000000),
 };
 
 /*
Signature · 1 line
2.43.0
author maintainer
#20 lore raw

PATCH 19/40 nvme: fix NVME_NS_DEAC may incorrectly identifying the disk as EXT_LBA.

In reply to Sasha Levin

From: Boyang Yu <[email protected]>

[ Upstream commit 9570a48847e3acfa1a741cef431c923325ddc637 ]

The value of NVME_NS_DEAC is 3,
which means NVME_NS_METADATA_SUPPORTED | NVME_NS_EXT_LBAS. Provide a unique value for this feature flag.

Fixes 1b96f862eccc ("nvme: implement the DEAC bit for the Write Zeroes command")

---
 drivers/nvme/host/nvme.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/nvme/host/nvme.h +1 -1
index d7bcc6d51e84e..3f2b0d41e4819 100644
@@ -503,7 +503,7 @@ static inline bool nvme_ns_head_multipath(struct nvme_ns_head *head)
 enum nvme_ns_features {
 	NVME_NS_EXT_LBAS = 1 << 0, /* support extended LBA format */
 	NVME_NS_METADATA_SUPPORTED = 1 << 1, /* support getting generated md */
-	NVME_NS_DEAC,		/* DEAC bit in Write Zeores supported */
+	NVME_NS_DEAC = 1 << 2,		/* DEAC bit in Write Zeores supported */
 };
 
 struct nvme_ns {
Signature · 1 line
2.43.0
author maintainer
#21 lore raw

PATCH 20/40 Input: ads7846 - use spi_device_id table

In reply to Sasha Levin

From: Alexander Stein <[email protected]>

[ Upstream commit 7c7b1be19b228b450c2945ec379d7fc6bfef9852 ]

As the driver supports more devices over time the single MODULE_ALIAS is complete and raises several warnings:
SPI driver ads7846 has no spi_device_id for ti,tsc2046
SPI driver ads7846 has no spi_device_id for ti,ads7843
SPI driver ads7846 has no spi_device_id for ti,ads7845
SPI driver ads7846 has no spi_device_id for ti,ads7873

Fix this by adding a spi_device_id table and removing the manual MODULE_ALIAS.

---
 drivers/input/touchscreen/ads7846.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/input/touchscreen/ads7846.c +11 -1
index d2bbb436a77df..4d13db13b9e57 100644
@@ -1111,6 +1111,16 @@ static const struct of_device_id ads7846_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
 
+static const struct spi_device_id ads7846_spi_ids[] = {
+	{ "tsc2046", 7846 },
+	{ "ads7843", 7843 },
+	{ "ads7845", 7845 },
+	{ "ads7846", 7846 },
+	{ "ads7873", 7873 },
+	{ },
+};
+MODULE_DEVICE_TABLE(spi, ads7846_spi_ids);
+
 static const struct ads7846_platform_data *ads7846_get_props(struct device *dev)
 {
 	struct ads7846_platform_data *pdata;
@@ -1386,10 +1396,10 @@ static struct spi_driver ads7846_driver = {
 	},
 	.probe		= ads7846_probe,
 	.remove		= ads7846_remove,
+	.id_table	= ads7846_spi_ids,
 };
 
 module_spi_driver(ads7846_driver);
 
 MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("spi:ads7846");
Signature · 1 line
2.43.0
author maintainer
#22 lore raw

PATCH 21/40 can: kvaser_usb: fix return value for hif_usb_send_regout

In reply to Sasha Levin

From: Chen Ni <[email protected]>

[ Upstream commit 0d34d8163fd87978a6abd792e2d8ad849f4c3d57 ]

As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error.

---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +1 -1
index 8faf8a462c055..7292c81fc0cdc 100644
@@ -294,7 +294,7 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
 	}
 	usb_free_urb(urb);
 
-	return 0;
+	return err;
 }
 
 int kvaser_usb_can_rx_over_error(struct net_device *netdev)
Signature · 1 line
2.43.0
author maintainer
#23 lore raw

PATCH 22/40 net: mvpp2: fill-in dev_port attribute

In reply to Sasha Levin

From: Aryan Srivastava <[email protected]>

[ Upstream commit 00418d5530ca1f42d8721fe0a3e73d1ae477c223 ]

Fill this in so user-space can identify multiple ports on the same CP unit.

---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +1 -0
index cebc79a710ec2..6340e5e61a7da 100644
@@ -6906,6 +6906,7 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 	/* 9704 == 9728 - 20 and rounding to 8 */
 	dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
 	device_set_node(&dev->dev, port_fwnode);
+	dev->dev_port = port->id;
 
 	port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
 	port->pcs_gmac.neg_mode = true;
Signature · 1 line
2.43.0
author maintainer
#24 lore raw

PATCH 23/40 gpio: pca953x: fix pca953x_irq_bus_sync_unlock race

In reply to Sasha Levin

From: Ian Ray <[email protected]>

[ Upstream commit bfc6444b57dc7186b6acc964705d7516cbaf3904 ]

Ensure that `i2c_lock' is held when setting interrupt latch and mask in pca953x_irq_bus_sync_unlock() in order to avoid races.

The other (non-probe) call site pca953x_gpio_set_multiple() ensures the lock is held before calling pca953x_write_regs().

The problem occurred when a request raced against irq_bus_sync_unlock() approximately once per thousand reboots on an i.MX8MP based system.

* Normal case

   0-0022: write register AI|3a {03,02,00,00,01} Input latch P0
   0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
   0-0022: write register AI|08 {ff,00,00,00,00} Output P3
   0-0022: write register AI|12 {fc,00,00,00,00} Config P3

* Race case

   0-0022: write register AI|08 {ff,00,00,00,00} Output P3
   0-0022: write register AI|08 {03,02,00,00,01} *** Wrong register ***
   0-0022: write register AI|12 {fc,00,00,00,00} Config P3
   0-0022: write register AI|49 {fc,fd,ff,ff,fe} Interrupt mask P0
---
 drivers/gpio/gpio-pca953x.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpio/gpio-pca953x.c +2 -0
index 00ffa168e4056..f2f40393e3695 100644
@@ -758,6 +758,8 @@ static void pca953x_irq_bus_sync_unlock(struct irq_data *d)
 	int level;
 
 	if (chip->driver_data & PCA_PCAL) {
+		guard(mutex)(&chip->i2c_lock);
+
 		/* Enable latch on interrupt-enabled inputs */
 		pca953x_write_regs(chip, PCAL953X_IN_LATCH, chip->irq_mask);
 
Signature · 1 line
2.43.0
author maintainer
#25 lore raw

PATCH 24/40 octeontx2-pf: Fix coverity and klockwork issues in octeon PF driver

In reply to Sasha Levin

From: Ratheesh Kannoth <[email protected]>

[ Upstream commit 02ea312055da84e08e3e5bce2539c1ff11c8b5f2 ]

Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks.

---
 .../marvell/octeontx2/nic/otx2_common.c       | 10 ++--
 .../ethernet/marvell/octeontx2/nic/otx2_reg.h | 55 ++++++++++---------
 .../marvell/octeontx2/nic/otx2_txrx.c         |  2 +-
 .../net/ethernet/marvell/octeontx2/nic/qos.c  |  3 +-
 4 files changed, 35 insertions(+), 35 deletions(-)
drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +5 -5
index a85ac039d779b..87d5776e3b88e 100644
@@ -648,14 +648,14 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
 	} else if (lvl == NIX_TXSCH_LVL_TL4) {
 		parent = schq_list[NIX_TXSCH_LVL_TL3][prio];
 		req->reg[0] = NIX_AF_TL4X_PARENT(schq);
-		req->regval[0] = parent << 16;
+		req->regval[0] = (u64)parent << 16;
 		req->num_regs++;
 		req->reg[1] = NIX_AF_TL4X_SCHEDULE(schq);
 		req->regval[1] = dwrr_val;
 	} else if (lvl == NIX_TXSCH_LVL_TL3) {
 		parent = schq_list[NIX_TXSCH_LVL_TL2][prio];
 		req->reg[0] = NIX_AF_TL3X_PARENT(schq);
-		req->regval[0] = parent << 16;
+		req->regval[0] = (u64)parent << 16;
 		req->num_regs++;
 		req->reg[1] = NIX_AF_TL3X_SCHEDULE(schq);
 		req->regval[1] = dwrr_val;
@@ -670,11 +670,11 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
 	} else if (lvl == NIX_TXSCH_LVL_TL2) {
 		parent = schq_list[NIX_TXSCH_LVL_TL1][prio];
 		req->reg[0] = NIX_AF_TL2X_PARENT(schq);
-		req->regval[0] = parent << 16;
+		req->regval[0] = (u64)parent << 16;
 
 		req->num_regs++;
 		req->reg[1] = NIX_AF_TL2X_SCHEDULE(schq);
-		req->regval[1] = TXSCH_TL1_DFLT_RR_PRIO << 24 | dwrr_val;
+		req->regval[1] = (u64)hw->txschq_aggr_lvl_rr_prio << 24 | dwrr_val;
 
 		if (lvl == hw->txschq_link_cfg_lvl) {
 			req->num_regs++;
@@ -698,7 +698,7 @@ int otx2_txschq_config(struct otx2_nic *pfvf, int lvl, int prio, bool txschq_for
 
 		req->num_regs++;
 		req->reg[1] = NIX_AF_TL1X_TOPOLOGY(schq);
-		req->regval[1] = (TXSCH_TL1_DFLT_RR_PRIO << 1);
+		req->regval[1] = hw->txschq_aggr_lvl_rr_prio << 1;
 
 		req->num_regs++;
 		req->reg[2] = NIX_AF_TL1X_CIR(schq);
drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h +28 -27

61 lines not on this page · raw message

drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +1 -1
index 04a49b9b545f3..0ca9f2ffd932d 100644
@@ -510,7 +510,7 @@ static int otx2_tx_napi_handler(struct otx2_nic *pfvf,
 
 static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll)
 {
-	struct dim_sample dim_sample;
+	struct dim_sample dim_sample = { 0 };
 	u64 rx_frames, rx_bytes;
 	u64 tx_frames, tx_bytes;
 
drivers/net/ethernet/marvell/octeontx2/nic/qos.c +1 -2
index 6cddb4da85b71..4995a2d54d7d0 100644
@@ -153,7 +153,6 @@ static void __otx2_qos_txschq_cfg(struct otx2_nic *pfvf,
 		num_regs++;
 
 		otx2_config_sched_shaping(pfvf, node, cfg, &num_regs);
-
 	} else if (level == NIX_TXSCH_LVL_TL4) {
 		otx2_config_sched_shaping(pfvf, node, cfg, &num_regs);
 	} else if (level == NIX_TXSCH_LVL_TL3) {
@@ -176,7 +175,7 @@ static void __otx2_qos_txschq_cfg(struct otx2_nic *pfvf,
 		/* check if node is root */
 		if (node->qid == OTX2_QOS_QID_INNER && !node->parent) {
 			cfg->reg[num_regs] = NIX_AF_TL2X_SCHEDULE(node->schq);
-			cfg->regval[num_regs] =  TXSCH_TL1_DFLT_RR_PRIO << 24 |
+			cfg->regval[num_regs] =  (u64)hw->txschq_aggr_lvl_rr_prio << 24 |
 						 mtu_to_dwrr_weight(pfvf,
 								    pfvf->tx_max_pktlen);
 			num_regs++;
Signature · 1 line
2.43.0
author maintainer
#26 lore raw

PATCH 25/40 s390/sclp: Fix sclp_init() cleanup on failure

In reply to Sasha Levin

From: Heiko Carstens <[email protected]>

[ Upstream commit 6434b33faaa063df500af355ee6c3942e0f8d982 ]

If sclp_init() fails it only partially cleans up: if there are multiple failing calls to sclp_init() sclp_state_change_event will be added several times to sclp_reg_list, which results in the following warning:

------------[ cut here ]------------
list_add double add: new=000003ffe1598c10, prev=000003ffe1598bf0, next=000003ffe1598c10.
WARNING: CPU: 0 PID: 1 at lib/list_debug.c:35 __list_add_valid_or_report+0xde/0xf8
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc3
Krnl PSW : 0404c00180000000 000003ffe0d6076a (__list_add_valid_or_report+0xe2/0xf8)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
...
Call Trace:
 [<000003ffe0d6076a>] __list_add_valid_or_report+0xe2/0xf8
([<000003ffe0d60766>] __list_add_valid_or_report+0xde/0xf8)
 [<000003ffe0a8d37e>] sclp_init+0x40e/0x450
 [<000003ffe00009f2>] do_one_initcall+0x42/0x1e0
 [<000003ffe15b77a6>] do_initcalls+0x126/0x150
 [<000003ffe15b7a0a>] kernel_init_freeable+0x1ba/0x1f8
 [<000003ffe0d6650e>] kernel_init+0x2e/0x180
 [<000003ffe000301c>] __ret_from_fork+0x3c/0x60
 [<000003ffe0d759ca>] ret_from_fork+0xa/0x30

Fix this by removing sclp_state_change_event from sclp_reg_list when sclp_init() fails.

---
 drivers/s390/char/sclp.c | 1 +
 1 file changed, 1 insertion(+)
drivers/s390/char/sclp.c +1 -0
index d53ee34d398f6..fbe29cabcbb83 100644
@@ -1293,6 +1293,7 @@ sclp_init(void)
 fail_unregister_reboot_notifier:
 	unregister_reboot_notifier(&sclp_reboot_notifier);
 fail_init_state_uninitialized:
+	list_del(&sclp_state_change_event.list);
 	sclp_init_state = sclp_init_state_uninitialized;
 	free_page((unsigned long) sclp_read_sccb);
 	free_page((unsigned long) sclp_init_sccb);
Signature · 1 line
2.43.0
author maintainer
#27 lore raw

PATCH 26/40 platform/mellanox: nvsw-sn2201: Add check for platform_device_add_resources

In reply to Sasha Levin

From: Chen Ni <[email protected]>

[ Upstream commit d56fbfbaf592a115b2e11c1044829afba34069d2 ]

Add check for the return value of platform_device_add_resources() and return the error if it fails in order to catch the error.

---
 drivers/platform/mellanox/nvsw-sn2201.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/platform/mellanox/nvsw-sn2201.c +4 -1
index 3ef655591424c..abe7be602f846 100644
@@ -1198,6 +1198,7 @@ static int nvsw_sn2201_config_pre_init(struct nvsw_sn2201 *nvsw_sn2201)
 static int nvsw_sn2201_probe(struct platform_device *pdev)
 {
 	struct nvsw_sn2201 *nvsw_sn2201;
+	int ret;
 
 	nvsw_sn2201 = devm_kzalloc(&pdev->dev, sizeof(*nvsw_sn2201), GFP_KERNEL);
 	if (!nvsw_sn2201)
@@ -1205,8 +1206,10 @@ static int nvsw_sn2201_probe(struct platform_device *pdev)
 
 	nvsw_sn2201->dev = &pdev->dev;
 	platform_set_drvdata(pdev, nvsw_sn2201);
-	platform_device_add_resources(pdev, nvsw_sn2201_lpc_io_resources,
+	ret = platform_device_add_resources(pdev, nvsw_sn2201_lpc_io_resources,
 				      ARRAY_SIZE(nvsw_sn2201_lpc_io_resources));
+	if (ret)
+		return ret;
 
 	nvsw_sn2201->main_mux_deferred_nr = NVSW_SN2201_MAIN_MUX_DEFER_NR;
 	nvsw_sn2201->main_mux_devs = nvsw_sn2201_main_mux_brdinfo;
Signature · 1 line
2.43.0
author maintainer
#28 lore raw

PATCH 27/40 platform/x86: wireless-hotkey: Add support for LG Airplane Button

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 151e78a0b89ee6dec93382dbdf5b1ef83f9c4716 ]

The LGEX0815 ACPI device is used by the "LG Airplane Mode Button" Windows driver for handling rfkill requests. When the ACPI device receives an 0x80 ACPI notification, an rfkill event is to be send to userspace.

Add support for the LGEX0815 ACPI device to the driver.

---
 drivers/platform/x86/wireless-hotkey.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/platform/x86/wireless-hotkey.c +2 -0
index 4422863f47bbe..01feb6e6787f2 100644
@@ -19,6 +19,7 @@ MODULE_AUTHOR("Alex Hung");
 MODULE_ALIAS("acpi*:HPQ6001:*");
 MODULE_ALIAS("acpi*:WSTADEF:*");
 MODULE_ALIAS("acpi*:AMDI0051:*");
+MODULE_ALIAS("acpi*:LGEX0815:*");
 
 struct wl_button {
 	struct input_dev *input_dev;
@@ -29,6 +30,7 @@ static const struct acpi_device_id wl_ids[] = {
 	{"HPQ6001", 0},
 	{"WSTADEF", 0},
 	{"AMDI0051", 0},
+	{"LGEX0815", 0},
 	{"", 0},
 };
 
Signature · 1 line
2.43.0
author maintainer
#29 lore raw

PATCH 28/40 platform/x86: lg-laptop: Remove LGEX0815 hotkey handling

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 413c204595ca98a4f33414a948c18d7314087342 ]

The rfkill hotkey handling is already provided by the wireless-hotkey driver. Remove the now unnecessary rfkill hotkey handling to avoid duplicating functionality.

The ACPI notify handler still prints debugging information when receiving ACPI notifications to aid in reverse-engineering.

---
 drivers/platform/x86/lg-laptop.c | 8 --------
 1 file changed, 8 deletions(-)
drivers/platform/x86/lg-laptop.c +0 -8
index e714ee6298dda..5d4df782ce8e1 100644
@@ -84,7 +84,6 @@ static const struct key_entry wmi_keymap[] = {
 					  * this key both sends an event and
 					  * changes backlight level.
 					  */
-	{KE_KEY, 0x80, {KEY_RFKILL} },
 	{KE_END, 0}
 };
 
@@ -272,14 +271,7 @@ static void wmi_input_setup(void)
 
 static void acpi_notify(struct acpi_device *device, u32 event)
 {
-	struct key_entry *key;
-
 	acpi_handle_debug(device->handle, "notify: %d\n", event);
-	if (inited & INIT_SPARSE_KEYMAP) {
-		key = sparse_keymap_entry_from_scancode(wmi_input_dev, 0x80);
-		if (key && key->type == KE_KEY)
-			sparse_keymap_report_entry(wmi_input_dev, key, 1, true);
-	}
 }
 
 static ssize_t fan_mode_store(struct device *dev,
Signature · 1 line
2.43.0
author maintainer
#30 lore raw

PATCH 29/40 platform/x86: lg-laptop: Change ACPI device id

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit 58a54f27a0dac81f7fd3514be01012635219a53c ]

The LGEX0815 ACPI device id is used for handling hotkey events, but this functionality is already handled by the wireless-hotkey driver.

The LGEX0820 ACPI device id however is used to manage various platform features using the WMAB/WMBB ACPI methods. Use this ACPI device id to avoid blocking the wireless-hotkey driver from probing.

---
 drivers/platform/x86/lg-laptop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/lg-laptop.c +1 -1
index 5d4df782ce8e1..c19c866361beb 100644
@@ -768,7 +768,7 @@ static void acpi_remove(struct acpi_device *device)
 }
 
 static const struct acpi_device_id device_ids[] = {
-	{"LGEX0815", 0},
+	{"LGEX0820", 0},
 	{"", 0}
 };
 MODULE_DEVICE_TABLE(acpi, device_ids);
Signature · 1 line
2.43.0
author maintainer
#31 lore raw

PATCH 30/40 platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB

In reply to Sasha Levin

From: Armin Wolf <[email protected]>

[ Upstream commit b27ea279556121b54d3f45d0529706cf100cdb3a ]

On the LG Gram 16Z90S, the WMAB and WMBB ACPI methods are not mapped under \XINI, but instead are mapped under \_SB.XINI.

The reason for this is that the LGEX0820 ACPI device used by this driver is mapped at \_SB.XINI, so the ACPI methods where moved as well to appear below the LGEX0820 ACPI device.

Fix this by using the ACPI handle from the ACPI device when evaluating both methods.

---
 drivers/platform/x86/lg-laptop.c | 79 +++++++++++++-------------------
 1 file changed, 33 insertions(+), 46 deletions(-)
drivers/platform/x86/lg-laptop.c +33 -46
index c19c866361beb..78c48a1f9c68a 100644
@@ -39,8 +39,6 @@ MODULE_LICENSE("GPL");
 #define WMI_METHOD_WMBB "2B4F501A-BD3C-4394-8DCF-00A7D2BC8210"
 #define WMI_EVENT_GUID  WMI_EVENT_GUID0
 
-#define WMAB_METHOD     "\\XINI.WMAB"
-#define WMBB_METHOD     "\\XINI.WMBB"
 #define SB_GGOV_METHOD  "\\_SB.GGOV"
 #define GOV_TLED        0x2020008
 #define WM_GET          1
@@ -74,7 +72,7 @@ static u32 inited;
 
 static int battery_limit_use_wmbb;
 static struct led_classdev kbd_backlight;
-static enum led_brightness get_kbd_backlight_level(void);
+static enum led_brightness get_kbd_backlight_level(struct device *dev);
 
 static const struct key_entry wmi_keymap[] = {
 	{KE_KEY, 0x70, {KEY_F15} },	 /* LG control panel (F1) */
@@ -127,11 +125,10 @@ static int ggov(u32 arg0)
 	return res;
 }
 
-static union acpi_object *lg_wmab(u32 method, u32 arg1, u32 arg2)
+static union acpi_object *lg_wmab(struct device *dev, u32 method, u32 arg1, u32 arg2)
 {
 	union acpi_object args[3];
 	acpi_status status;
-	acpi_handle handle;
 	struct acpi_object_list arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
@@ -142,29 +139,22 @@ static union acpi_object *lg_wmab(u32 method, u32 arg1, u32 arg2)
 	args[2].type = ACPI_TYPE_INTEGER;
 	args[2].integer.value = arg2;
 
-	status = acpi_get_handle(NULL, (acpi_string) WMAB_METHOD, &handle);
-	if (ACPI_FAILURE(status)) {
-		pr_err("Cannot get handle");
-		return NULL;
-	}
-
 	arg.count = 3;
 	arg.pointer = args;
 
-	status = acpi_evaluate_object(handle, NULL, &arg, &buffer);
+	status = acpi_evaluate_object(ACPI_HANDLE(dev), "WMAB", &arg, &buffer);
 	if (ACPI_FAILURE(status)) {
-		acpi_handle_err(handle, "WMAB: call failed.\n");
+		dev_err(dev, "WMAB: call failed.\n");
 		return NULL;
 	}
 
 	return buffer.pointer;
 }
 
-static union acpi_object *lg_wmbb(u32 method_id, u32 arg1, u32 arg2)
+static union acpi_object *lg_wmbb(struct device *dev, u32 method_id, u32 arg1, u32 arg2)
 {
 	union acpi_object args[3];
 	acpi_status status;
-	acpi_handle handle;
 	struct acpi_object_list arg;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	u8 buf[32];
@@ -180,18 +170,12 @@ static union acpi_object *lg_wmbb(u32 method_id, u32 arg1, u32 arg2)
 	args[2].buffer.length = 32;
 	args[2].buffer.pointer = buf;
 
-	status = acpi_get_handle(NULL, (acpi_string)WMBB_METHOD, &handle);
-	if (ACPI_FAILURE(status)) {
-		pr_err("Cannot get handle");
-		return NULL;
-	}
-
 	arg.count = 3;
 	arg.pointer = args;
 
-	status = acpi_evaluate_object(handle, NULL, &arg, &buffer);
+	status = acpi_evaluate_object(ACPI_HANDLE(dev), "WMBB", &arg, &buffer);
 	if (ACPI_FAILURE(status)) {
-		acpi_handle_err(handle, "WMAB: call failed.\n");
+		dev_err(dev, "WMBB: call failed.\n");
 		return NULL;
 	}
 
@@ -222,7 +206,7 @@ static void wmi_notify(u32 value, void *context)
 
 		if (eventcode == 0x10000000) {
 			led_classdev_notify_brightness_hw_changed(
-				&kbd_backlight, get_kbd_backlight_level());
+				&kbd_backlight, get_kbd_backlight_level(kbd_backlight.dev->parent));
 		} else {
 			key = sparse_keymap_entry_from_scancode(
 				wmi_input_dev, eventcode);
@@ -287,7 +271,7 @@ static ssize_t fan_mode_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_FAN_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -298,9 +282,9 @@ static ssize_t fan_mode_store(struct device *dev,
 
 	m = r->integer.value;
 	kfree(r);
-	r = lg_wmab(WM_FAN_MODE, WM_SET, (m & 0xffffff0f) | (value << 4));
+	r = lg_wmab(dev, WM_FAN_MODE, WM_SET, (m & 0xffffff0f) | (value << 4));
 	kfree(r);
-	r = lg_wmab(WM_FAN_MODE, WM_SET, (m & 0xfffffff0) | value);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_SET, (m & 0xfffffff0) | value);
 	kfree(r);
 
 	return count;
@@ -312,7 +296,7 @@ static ssize_t fan_mode_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_FAN_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_FAN_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -339,7 +323,7 @@ static ssize_t usb_charge_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmbb(WMBB_USB_CHARGE, WM_SET, value);
+	r = lg_wmbb(dev, WMBB_USB_CHARGE, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -353,7 +337,7 @@ static ssize_t usb_charge_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmbb(WMBB_USB_CHARGE, WM_GET, 0);
+	r = lg_wmbb(dev, WMBB_USB_CHARGE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -381,7 +365,7 @@ static ssize_t reader_mode_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_READER_MODE, WM_SET, value);
+	r = lg_wmab(dev, WM_READER_MODE, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -395,7 +379,7 @@ static ssize_t reader_mode_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_READER_MODE, WM_GET, 0);
+	r = lg_wmab(dev, WM_READER_MODE, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -423,7 +407,7 @@ static ssize_t fn_lock_store(struct device *dev,
 	if (ret)
 		return ret;
 
-	r = lg_wmab(WM_FN_LOCK, WM_SET, value);
+	r = lg_wmab(dev, WM_FN_LOCK, WM_SET, value);
 	if (!r)
 		return -EIO;
 
@@ -437,7 +421,7 @@ static ssize_t fn_lock_show(struct device *dev,
 	unsigned int status;
 	union acpi_object *r;
 
-	r = lg_wmab(WM_FN_LOCK, WM_GET, 0);
+	r = lg_wmab(dev, WM_FN_LOCK, WM_GET, 0);
 	if (!r)
 		return -EIO;
 
@@ -467,9 +451,9 @@ static ssize_t charge_control_end_threshold_store(struct device *dev,
 		union acpi_object *r;
 
 		if (battery_limit_use_wmbb)
-			r = lg_wmbb(WMBB_BATT_LIMIT, WM_SET, value);
+			r = lg_wmbb(&pf_device->dev, WMBB_BATT_LIMIT, WM_SET, value);
 		else
-			r = lg_wmab(WM_BATT_LIMIT, WM_SET, value);
+			r = lg_wmab(&pf_device->dev, WM_BATT_LIMIT, WM_SET, value);
 		if (!r)
 			return -EIO;
 
@@ -488,7 +472,7 @@ static ssize_t charge_control_end_threshold_show(struct device *device,
 	union acpi_object *r;
 
 	if (battery_limit_use_wmbb) {
-		r = lg_wmbb(WMBB_BATT_LIMIT, WM_GET, 0);
+		r = lg_wmbb(&pf_device->dev, WMBB_BATT_LIMIT, WM_GET, 0);
 		if (!r)
 			return -EIO;
 
@@ -499,7 +483,7 @@ static ssize_t charge_control_end_threshold_show(struct device *device,
 
 		status = r->buffer.pointer[0x10];
 	} else {
-		r = lg_wmab(WM_BATT_LIMIT, WM_GET, 0);
+		r = lg_wmab(&pf_device->dev, WM_BATT_LIMIT, WM_GET, 0);
 		if (!r)
 			return -EIO;
 
@@ -578,7 +562,7 @@ static void tpad_led_set(struct led_classdev *cdev,
 {
 	union acpi_object *r;
 
-	r = lg_wmab(WM_TLED, WM_SET, brightness > LED_OFF);
+	r = lg_wmab(cdev->dev->parent, WM_TLED, WM_SET, brightness > LED_OFF);
 	kfree(r);
 }
 
@@ -600,16 +584,16 @@ static void kbd_backlight_set(struct led_classdev *cdev,
 		val = 0;
 	if (brightness >= LED_FULL)
 		val = 0x24;
-	r = lg_wmab(WM_KEY_LIGHT, WM_SET, val);
+	r = lg_wmab(cdev->dev->parent, WM_KEY_LIGHT, WM_SET, val);
 	kfree(r);
 }
 
-static enum led_brightness get_kbd_backlight_level(void)
+static enum led_brightness get_kbd_backlight_level(struct device *dev)
 {
 	union acpi_object *r;
 	int val;
 
-	r = lg_wmab(WM_KEY_LIGHT, WM_GET, 0);
+	r = lg_wmab(dev, WM_KEY_LIGHT, WM_GET, 0);
 
 	if (!r)
 		return LED_OFF;
@@ -637,7 +621,7 @@ static enum led_brightness get_kbd_backlight_level(void)
 
 static enum led_brightness kbd_backlight_get(struct led_classdev *cdev)
 {
-	return get_kbd_backlight_level();
+	return get_kbd_backlight_level(cdev->dev->parent);
 }
 
 static LED_DEVICE(kbd_backlight, 255, LED_BRIGHT_HW_CHANGED);
@@ -664,6 +648,11 @@ static struct platform_driver pf_driver = {
 
 static int acpi_add(struct acpi_device *device)
 {
+	struct platform_device_info pdev_info = {
+		.fwnode = acpi_fwnode_handle(device),
+		.name = PLATFORM_NAME,
+		.id = PLATFORM_DEVID_NONE,
+	};
 	int ret;
 	const char *product;
 	int year = 2017;
@@ -675,9 +664,7 @@ static int acpi_add(struct acpi_device *device)
 	if (ret)
 		return ret;
 
-	pf_device = platform_device_register_simple(PLATFORM_NAME,
-						    PLATFORM_DEVID_NONE,
-						    NULL, 0);
+	pf_device = platform_device_register_full(&pdev_info);
 	if (IS_ERR(pf_device)) {
 		ret = PTR_ERR(pf_device);
 		pf_device = NULL;
Signature · 1 line
2.43.0
author maintainer
#32 lore raw

PATCH 31/40 btrfs: scrub: handle RST lookup error correctly

In reply to Sasha Levin

From: Qu Wenruo <[email protected]>

[ Upstream commit 2c49908634a2b97b1c3abe0589be2739ac5e7fd5 ]

[BUG]
When running btrfs/060 with forced RST feature, it would crash the following ASSERT() inside scrub_read_endio():

	ASSERT(sector_nr < stripe->nr_sectors);

Before that, we would have tree dump from btrfs_get_raid_extent_offset(), as we failed to find the RST entry for the range.

[CAUSE]
Inside scrub_submit_extent_sector_read() every time we allocated a new bbio we immediately called btrfs_map_block() to make sure there was some RST range covering the scrub target.

But if btrfs_map_block() fails, we immediately call endio for the bbio, while the bbio is newly allocated, it's completely empty.

Then inside scrub_read_endio(), we go through the bvecs to find the sector number (as bi_sector is no longer reliable if the bio is submitted to lower layers).

And since the bio is empty, such bvecs iteration would not find any sector matching the sector, and return sector_nr == stripe->nr_sectors, triggering the ASSERT().

[FIX]
Instead of calling btrfs_map_block() after allocating a new bbio, call btrfs_map_block() first.

Since our only objective of calling btrfs_map_block() is only to update stripe_len, there is really no need to do that after btrfs_alloc_bio().

This new timing would avoid the problem of handling empty bbio completely, and in fact fixes a possible race window for the old code, where if the submission thread is the only owner of the pending_io, the scrub would never finish (since we didn't decrease the pending_io counter).

Although the root cause of RST lookup failure still needs to be addressed.

---
 fs/btrfs/scrub.c | 24 ++++++++++++++----------
 1 file changed, 14 insertions(+), 10 deletions(-)
fs/btrfs/scrub.c +14 -10
index 4b22cfe9a98cb..e3e0b8a4c187c 100644
@@ -1688,20 +1688,24 @@ static void scrub_submit_extent_sector_read(struct scrub_ctx *sctx,
 					    (i << fs_info->sectorsize_bits);
 			int err;
 
-			bbio = btrfs_bio_alloc(stripe->nr_sectors, REQ_OP_READ,
-					       fs_info, scrub_read_endio, stripe);
-			bbio->bio.bi_iter.bi_sector = logical >> SECTOR_SHIFT;
-
 			io_stripe.is_scrub = true;
+			stripe_len = (nr_sectors - i) << fs_info->sectorsize_bits;
+			/*
+			 * For RST cases, we need to manually split the bbio to
+			 * follow the RST boundary.
+			 */
 			err = btrfs_map_block(fs_info, BTRFS_MAP_READ, logical,
-					      &stripe_len, &bioc, &io_stripe,
-					      &mirror);
+					      &stripe_len, &bioc, &io_stripe, &mirror);
 			btrfs_put_bioc(bioc);
-			if (err) {
-				btrfs_bio_end_io(bbio,
-						 errno_to_blk_status(err));
-				return;
+			if (err < 0) {
+				set_bit(i, &stripe->io_error_bitmap);
+				set_bit(i, &stripe->error_bitmap);
+				continue;
 			}
+
+			bbio = btrfs_bio_alloc(stripe->nr_sectors, REQ_OP_READ,
+					       fs_info, scrub_read_endio, stripe);
+			bbio->bio.bi_iter.bi_sector = logical >> SECTOR_SHIFT;
 		}
 
 		__bio_add_page(&bbio->bio, page, fs_info->sectorsize, pgoff);
Signature · 1 line
2.43.0
author maintainer
#33 lore raw

PATCH 32/40 btrfs: qgroup: fix quota root leak after quota disable failure

In reply to Sasha Levin

From: Filipe Manana <[email protected]>

[ Upstream commit a7e4c6a3031c74078dba7fa36239d0f4fe476c53 ]

If during the quota disable we fail when cleaning the quota tree or when deleting the root from the root tree, we jump to the 'out' label without ever dropping the reference on the quota root, resulting in a leak of the root since fs_info->quota_root is no longer pointing to the root (we have set it to NULL just before those steps).

Fix this by always doing a btrfs_put_root() call under the 'out' label. This is a problem that exists since qgroups were first added in 2012 by commit bed92eae26cc ("Btrfs: qgroup implementation and prototypes"), but back then we missed a kfree on the quota root and free_extent_buffer() calls on its root and commit root nodes, since back then roots were not yet reference counted.

---
 fs/btrfs/qgroup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/btrfs/qgroup.c +2 -2
index 1167899a16d05..0e9b21bf3aab7 100644
@@ -1351,7 +1351,7 @@ static int flush_reservations(struct btrfs_fs_info *fs_info)
 
 int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 {
-	struct btrfs_root *quota_root;
+	struct btrfs_root *quota_root = NULL;
 	struct btrfs_trans_handle *trans = NULL;
 	int ret = 0;
 
@@ -1449,9 +1449,9 @@ int btrfs_quota_disable(struct btrfs_fs_info *fs_info)
 	btrfs_free_tree_block(trans, btrfs_root_id(quota_root),
 			      quota_root->node, 0, 1);
 
-	btrfs_put_root(quota_root);
 
 out:
+	btrfs_put_root(quota_root);
 	mutex_unlock(&fs_info->qgroup_ioctl_lock);
 	if (ret && trans)
 		btrfs_end_transaction(trans);
Signature · 1 line
2.43.0
author maintainer
#34 lore raw

PATCH 33/40 ibmvnic: Add tx check to prevent skb leak

In reply to Sasha Levin

From: Nick Child <[email protected]>

[ Upstream commit 0983d288caf984de0202c66641577b739caad561 ]

Below is a summary of how the driver stores a reference to an skb during transmit:

    tx_buff[free_map[consumer_index]]->skb = new_skb;
    free_map[consumer_index] = IBMVNIC_INVALID_MAP;
    consumer_index ++;
Where variable data looks like this:
    free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3]
                                               	consumer_index^
    tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null]

The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT.

Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems.

---
 drivers/net/ethernet/ibm/ibmvnic.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/net/ethernet/ibm/ibmvnic.c +12 -0
index 30c47b8470ade..381f326b2722b 100644
@@ -2478,6 +2478,18 @@ static netdev_tx_t ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev)
 	    (tx_pool->consumer_index + 1) % tx_pool->num_buffers;
 
 	tx_buff = &tx_pool->tx_buff[bufidx];
+
+	/* Sanity checks on our free map to make sure it points to an index
+	 * that is not being occupied by another skb. If skb memory is
+	 * not freed then we see congestion control kick in and halt tx.
+	 */
+	if (unlikely(tx_buff->skb)) {
+		dev_warn_ratelimited(dev, "TX free map points to untracked skb (%s %d idx=%d)\n",
+				     skb_is_gso(skb) ? "tso_pool" : "tx_pool",
+				     queue_num, bufidx);
+		dev_kfree_skb_any(tx_buff->skb);
+	}
+
 	tx_buff->skb = skb;
 	tx_buff->index = bufidx;
 	tx_buff->pool_index = queue_num;
Signature · 1 line
2.43.0
author maintainer
#35 lore raw

PATCH 34/40 ALSA: PCM: Allow resume only for suspended streams

In reply to Sasha Levin

From: Takashi Iwai <[email protected]>

[ Upstream commit 1225675ca74c746f09211528588e83b3def1ff6a ]

snd_pcm_resume() should bail out if the stream isn't in a suspended state. Otherwise it'd allow doubly resume.

---
 sound/core/pcm_native.c | 2 ++
 1 file changed, 2 insertions(+)
sound/core/pcm_native.c +2 -0
index 0b76e76823d28..353ecd960a1f5 100644
@@ -1775,6 +1775,8 @@ static int snd_pcm_pre_resume(struct snd_pcm_substream *substream,
 			      snd_pcm_state_t state)
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	if (runtime->state != SNDRV_PCM_STATE_SUSPENDED)
+		return -EBADFD;
 	if (!(runtime->info & SNDRV_PCM_INFO_RESUME))
 		return -ENOSYS;
 	runtime->trigger_master = substream;
Signature · 1 line
2.43.0
author maintainer
#36 lore raw

PATCH 35/40 ALSA: hda/relatek: Enable Mute LED on HP Laptop 15-gw0xxx

In reply to Sasha Levin

From: Aivaz Latypov <[email protected]>

[ Upstream commit 1d091a98c399c17d0571fa1d91a7123a698446e4 ]

This HP Laptop uses ALC236 codec with COEF 0x07 controlling the mute LED. Enable existing quirk for this device.

---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
index 3e6de1d86022f..b3f429990e554 100644
@@ -10034,6 +10034,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x8788, "HP OMEN 15", ALC285_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x87b7, "HP Laptop 14-fq0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87c8, "HP", ALC287_FIXUP_HP_GPIO_LED),
+	SND_PCI_QUIRK(0x103c, 0x87d3, "HP Laptop 15-gw0xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
 	SND_PCI_QUIRK(0x103c, 0x87e5, "HP ProBook 440 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87e7, "HP ProBook 450 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x87f1, "HP ProBook 630 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
Signature · 1 line
2.43.0
author maintainer
#37 lore raw

PATCH 36/40 ALSA: dmaengine_pcm: terminate dmaengine before synchronize

In reply to Sasha Levin

From: Shengjiu Wang <[email protected]>

[ Upstream commit 6a7db25aad8ce6512b366d2ce1d0e60bac00a09d ]

When dmaengine supports pause function, in suspend state, dmaengine_pause() is called instead of dmaengine_terminate_async(),

In end of playback stream, the runtime->state will go to SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen at this time, application will not resume playback stream, the stream will be closed directly, the dmaengine_terminate_async() will not be called before the dmaengine_synchronize(), which violates the call sequence for dmaengine_synchronize().

This behavior also happens for capture streams, but there is no SNDRV_PCM_STATE_DRAINING state for capture. So use dmaengine_tx_status() to check the DMA status if the status is DMA_PAUSED, then call dmaengine_terminate_async() to terminate dmaengine before dmaengine_synchronize().

---
 sound/core/pcm_dmaengine.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
sound/core/pcm_dmaengine.c +12 -0
index d142609570347..e299e8634751f 100644
@@ -368,6 +368,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_sync_stop);
 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	kfree(prtd);
@@ -388,6 +394,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close);
 int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
+
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status == DMA_PAUSED)
+		dmaengine_terminate_async(prtd->dma_chan);
 
 	dmaengine_synchronize(prtd->dma_chan);
 	dma_release_channel(prtd->dma_chan);
Signature · 1 line
2.43.0
author maintainer
#38 lore raw

PATCH 37/40 parisc: use generic sys_fanotify_mark implementation

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 403f17a330732a666ae793f3b15bc75bb5540524 ]

The sys_fanotify_mark() syscall on parisc uses the reverse word order for the two halves of the 64-bit argument compared to all syscalls on all 32-bit architectures. As far as I can tell, the problem is that the function arguments on parisc are sorted backwards (26, 25, 24, 23, ...) compared to everyone else, so the calling conventions of using an even/odd register pair in native word order result in the lower word coming first in function arguments, matching the expected behavior on little-endian architectures. The system call conventions however ended up matching what the other 32-bit architectures do.

A glibc cleanup in 2020 changed the userspace behavior in a way that handles all architectures consistently, but this inadvertently broke parisc32 by changing to the same method as everyone else.

The change made it into glibc-2.35 and subsequently into debian 12 (bookworm), which is the latest stable release. This means we need to choose between reverting the glibc change or changing the kernel to match it again, but either hange will leave some systems broken.

Pick the option that is more likely to help current and future users and change the kernel to match current glibc. This also means the behavior is now consistent across architectures, but it breaks running new kernels with old glibc builds before 2.35.

---
I found this through code inspection, please double-check to make sure I got the bug and the fix right.

The alternative is to fix this by reverting glibc back to the unusual behavior.

---
 arch/parisc/Kconfig                     | 1 +
 arch/parisc/kernel/sys_parisc32.c       | 9 ---------
 arch/parisc/kernel/syscalls/syscall.tbl | 2 +-
 3 files changed, 2 insertions(+), 10 deletions(-)
arch/parisc/Kconfig +1 -0
index daafeb20f9937..dc9b902de8ea9 100644
@@ -16,6 +16,7 @@ config PARISC
 	select ARCH_HAS_UBSAN
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_NO_SG_CHAIN
+	select ARCH_SPLIT_ARG64 if !64BIT
 	select ARCH_SUPPORTS_HUGETLBFS if PA20
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_STACKWALK
arch/parisc/kernel/sys_parisc32.c +0 -9
index 2a12a547b447b..826c8e51b5853 100644
@@ -23,12 +23,3 @@ asmlinkage long sys32_unimplemented(int r26, int r25, int r24, int r23,
     	current->comm, current->pid, r20);
     return -ENOSYS;
 }
-
-asmlinkage long sys32_fanotify_mark(compat_int_t fanotify_fd, compat_uint_t flags,
-	compat_uint_t mask0, compat_uint_t mask1, compat_int_t dfd,
-	const char  __user * pathname)
-{
-	return sys_fanotify_mark(fanotify_fd, flags,
-			((__u64)mask1 << 32) | mask0,
-			 dfd, pathname);
-}
arch/parisc/kernel/syscalls/syscall.tbl +1 -1
index b236a84c4e127..5439ff05bdb2d 100644
@@ -364,7 +364,7 @@
 320	common	accept4			sys_accept4
 321	common	prlimit64		sys_prlimit64
 322	common	fanotify_init		sys_fanotify_init
-323	common	fanotify_mark		sys_fanotify_mark		sys32_fanotify_mark
+323	common	fanotify_mark		sys_fanotify_mark		compat_sys_fanotify_mark
 324	32	clock_adjtime		sys_clock_adjtime32
 324	64	clock_adjtime		sys_clock_adjtime
 325	common	name_to_handle_at	sys_name_to_handle_at
Signature · 1 line
2.43.0
author maintainer
#39 lore raw

PATCH 38/40 drm/amd/swsmu: add MALL init support workaround for smu_v14_0_1

In reply to Sasha Levin

From: Li Ma <[email protected]>

[ Upstream commit c223376b3019a00a0241faea0bc8c966738d1cc5 ]

[Why]
SMU firmware has not supported MALL PG.

[How]
Disable MALL PG and make it always on until SMU firmware is ready.

---
 drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c     | 13 ++++
 drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h |  5 ++
 .../pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h  |  4 +-
 drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h  |  4 +-
 .../drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c  | 73 +++++++++++++++++++
 5 files changed, 96 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +13 -0
index 65333141b1c1b..5a2247018229c 100644
@@ -323,6 +323,18 @@ static int smu_dpm_set_umsch_mm_enable(struct smu_context *smu,
 	return ret;
 }
 
+static int smu_set_mall_enable(struct smu_context *smu)
+{
+	int ret = 0;
+
+	if (!smu->ppt_funcs->set_mall_enable)
+		return 0;
+
+	ret = smu->ppt_funcs->set_mall_enable(smu);
+
+	return ret;
+}
+
 /**
  * smu_dpm_set_power_gate - power gate/ungate the specific IP block
  *
@@ -1785,6 +1797,7 @@ static int smu_hw_init(void *handle)
 		smu_dpm_set_jpeg_enable(smu, true);
 		smu_dpm_set_vpe_enable(smu, true);
 		smu_dpm_set_umsch_mm_enable(smu, true);
+		smu_set_mall_enable(smu);
 		smu_set_gfx_cgpg(smu, true);
 	}
 
drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +5 -0
index 1fa81575788c5..8667e8c9d7e7c 100644
@@ -1391,6 +1391,11 @@ struct pptable_funcs {
 	 */
 	int (*dpm_set_umsch_mm_enable)(struct smu_context *smu, bool enable);
 
+	/**
+	 * @set_mall_enable: Init MALL power gating control.
+	 */
+	int (*set_mall_enable)(struct smu_context *smu);
+
 	/**
 	 * @notify_rlc_state: Notify RLC power state to SMU.
 	 */
drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h +2 -2
index c4dc5881d8df0..e7f5ef49049f9 100644
@@ -106,8 +106,8 @@
 #define PPSMC_MSG_DisableLSdma                  0x35 ///< Disable LSDMA
 #define PPSMC_MSG_SetSoftMaxVpe                 0x36 ///<
 #define PPSMC_MSG_SetSoftMinVpe                 0x37 ///<
-#define PPSMC_MSG_AllocMALLCache                0x38 ///< Allocating MALL Cache
-#define PPSMC_MSG_ReleaseMALLCache              0x39 ///< Releasing MALL Cache
+#define PPSMC_MSG_MALLPowerController           0x38 ///< Set MALL control
+#define PPSMC_MSG_MALLPowerState                0x39 ///< Enter/Exit MALL PG
 #define PPSMC_Message_Count                     0x3A ///< Total number of PPSMC messages
 /** @}*/
 
drivers/gpu/drm/amd/pm/swsmu/inc/smu_types.h +3 -1
index af427cc7dbb84..4a7404856b960 100644
@@ -272,7 +272,9 @@
 	__SMU_DUMMY_MAP(SetSoftMinVpe), \
 	__SMU_DUMMY_MAP(GetMetricsVersion), \
 	__SMU_DUMMY_MAP(EnableUCLKShadow), \
-	__SMU_DUMMY_MAP(RmaDueToBadPageThreshold),
+	__SMU_DUMMY_MAP(RmaDueToBadPageThreshold), \
+	__SMU_DUMMY_MAP(MALLPowerController), \
+	__SMU_DUMMY_MAP(MALLPowerState),
 
 #undef __SMU_DUMMY_MAP
 #define __SMU_DUMMY_MAP(type)	SMU_MSG_##type
drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c +73 -0

103 lines not on this page · raw message

Signature · 1 line
2.43.0
author maintainer
#40 lore raw

PATCH 39/40 ASoC: amd: yc: Fix non-functional mic on ASUS M5602RA

In reply to Sasha Levin

From: Vyacheslav Frantsishko <[email protected]>

[ Upstream commit 63b47f026cc841bd3d3438dd6fccbc394dfead87 ]

The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.

---
 sound/soc/amd/yc/acp6x-mach.c | 7 +++++++
 1 file changed, 7 insertions(+)
sound/soc/amd/yc/acp6x-mach.c +7 -0
index 1760b5d42460a..4e3a8ce690a45 100644
@@ -283,6 +283,13 @@ static const struct dmi_system_id yc_acp_quirk_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "M5402RA"),
 		}
 	},
+        {
+		.driver_data = &acp6x_card,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "M5602RA"),
+		}
+	},
 	{
 		.driver_data = &acp6x_card,
 		.matches = {
Signature · 1 line
2.43.0
author maintainer
#41 lore raw

PATCH 40/40 net: usb: qmi_wwan: add Telit FN912 compositions

In reply to Sasha Levin

From: Daniele Palmas <[email protected]>

[ Upstream commit 77453e2b015b5ced5b3f45364dd5a72dfc3bdecb ]

Add the following Telit FN912 compositions:

0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)

T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3000 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb

T:  Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#=  7 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=3001 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN912
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/usb/qmi_wwan.c +2 -0
index a5469cf5cf670..befbca01bfe37 100644
@@ -1380,6 +1380,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)},	/* Telit LE910Cx */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3000, 0)},	/* Telit FN912 series */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x3001, 0)},	/* Telit FN912 series */
 	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
Signature · 1 line
2.43.0
#10 lore raw

Re: [PATCH AUTOSEL 6.9 10/40] ASoC: topology: Clean up route loading

In reply to Sasha Levin
Quoted 8 lines · Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit e0e7bc2cbee93778c4ad7d9a792d425ffb5af6f7 ]

Instead of using very long macro name, assign it to shorter variable and use it instead. While doing that, we can reduce multiple if checks using this define to one.

Quoted 6 lines

---

This is clearly a code cleanup, there is nothing here that looks in the slightest bit like stable material.

#42 lore raw
In reply to Sasha Levin
Quoted 9 lines · Sasha Levin

From: Tejun Heo <[email protected]>

[ Upstream commit 2a1b02bcba78f8498ab00d6142e1238d85b01591 ]

TASK_COMM_LEN is only 16 leading to badly truncated names for rescuers. For example, the rescuer for the inet_frag_wq workqueue becomes:

 $ ps -ef | grep '[k]worker/R-inet'
 root         483       2  0 Apr26 ?        00:00:00 [kworker/R-inet_]

* very old Linux: process names are fixed to 16 bytes
* Linux 6.something: we relaxed it for kthreads in principle, but oopsie-daisie forgot one case so it's still 16 bytes for that one case
* 2a1b02: now that one case also has length limit lifted

which for me makes this count as a feature rather than a bugfix, and I would not add it to -stable.
There might even be a poor soul who tests for exact process names in one obscure shell script of his… would not want to break his setup when going 6.9.8->6.9.9, only with 6.9.8->6.10.

author maintainer
#11 lore raw

Re: [PATCH AUTOSEL 6.9 10/40] ASoC: topology: Clean up route loading

In reply to Mark Brown
Quoted 16 lines · Mark Brown
Quoted 8 lines · Sasha Levin

From: Amadeusz Sławiński <[email protected]>

[ Upstream commit e0e7bc2cbee93778c4ad7d9a792d425ffb5af6f7 ]

Instead of using very long macro name, assign it to shorter variable and use it instead. While doing that, we can reduce multiple if checks using this define to one.

Quoted 6 lines

---

Quoted 2 lines

This is clearly a code cleanup, there is nothing here that looks in the slightest bit like stable material.

Dropped, thanks!

Signature · 2 lines
Thanks,
Sasha