Skip to contentSkip to conversation

udevng: Remove gps from setup_gobi

PATCH In review Denis Kenzior 2 participants 13 messages Jul 11, 2024

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/11 udevng: Remove gps from setup_gobi

From: Steve Schrock <[email protected]>

Even when the gps variable was set, it was not actually used for anything.

---
 plugins/udevng.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)
plugins/udevng.c +1 -13
index 8e116c6605ea..1c56e2ea62d3 100644
@@ -355,7 +355,6 @@ static gboolean setup_gobi(struct modem_info *modem)
 {
 	const struct device_info *qmi = NULL;
 	const struct device_info *net = NULL;
-	const char *gps = NULL;
 	GSList *list;
 
 	DBG("%s", modem->syspath);
@@ -373,23 +372,12 @@ static gboolean setup_gobi(struct modem_info *modem)
 			qmi = info;
 		else if (g_strcmp0(subsystem, "net") == 0) /* wwan */
 			net = info;
-		else if (g_strcmp0(subsystem, "tty") == 0) {
-			if (g_strcmp0(info->interface, "255/255/255") == 0) {
-				if (g_strcmp0(info->number, "03") == 0)
-					gps = info->devnode; /* gobi */
-			} else if (g_strcmp0(info->interface, "255/0/0") == 0) {
-				if (g_strcmp0(info->number, "01") == 0)
-					gps = info->devnode; /* ec20 */
-				/* ignore the 3rd device second AT/mdm iface */
-			}
-		}
 	}
 
 	if (qmi == NULL || net == NULL)
 		return FALSE;
 
-	DBG("qmi=%s net=%s gps=%s",
-			qmi->devnode, get_ifname(net), gps);
+	DBG("qmi=%s net=%s", qmi->devnode, get_ifname(net));
 
 	if (setup_qmi_qmux(modem, qmi, net) < 0)
 		return FALSE;
Signature · 1 line
2.45.2
#1 lore raw

PATCH v2 2/11 build: Require at least version 0.67 when building with external ELL

From: Marcel Holtmann <[email protected]>

---
 configure.ac | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
configure.ac +2 -2
index b14ed9e99c56..c0053df840ae 100644
@@ -247,8 +247,8 @@ AC_ARG_ENABLE([external_ell], AS_HELP_STRING([--enable-external-ell],
 				[enable external Embedded Linux library]),
 					[enable_external_ell=${enableval}])
 if (test "${enable_external_ell}" = "yes"); then
-	PKG_CHECK_MODULES(ELL, ell >= 0.66, dummy=yes,
-		AC_MSG_ERROR(Embedded Linux library >= 0.66 is required))
+	PKG_CHECK_MODULES(ELL, ell >= 0.67, dummy=yes,
+		AC_MSG_ERROR(Embedded Linux library >= 0.67 is required))
 	AC_SUBST(ELL_CFLAGS)
 	AC_SUBST(ELL_LIBS)
 fi
Signature · 1 line
2.45.2
#2 lore raw

PATCH v2 3/11 Release 2.9

In reply to Denis Kenzior

From: Marcel Holtmann <[email protected]>

---
 ChangeLog    | 3 +++
 configure.ac | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)
ChangeLog +3 -0
index 5d4feff7d8ae..48c6bd39bca4 100644
@@ -1,3 +1,6 @@
+ver 2.9:
+	Add support for QRTR based devices (MHI bus and SoC).
+
 ver 2.8:
 	Fix issue with handling USB TTY device detection.
 	Fix issue with handling GOBI versus QRTR detection.
configure.ac +1 -1
index c0053df840ae..3550b8a3d8e2 100644
@@ -1,5 +1,5 @@
 AC_PREREQ([2.69])
-AC_INIT([ofono], [2.8])
+AC_INIT([ofono], [2.9])
 
 AC_CONFIG_HEADERS(config.h)
 AC_CONFIG_AUX_DIR(build-aux)
Signature · 1 line
2.45.2
#3 lore raw

PATCH v2 4/11 gobi: Limit number of premultiplexed contexts to 4

In reply to Denis Kenzior

4 was chosen somewhat arbitrarily, but it is the maximum that the qmi_wwan_q driver can support out of the box. The only limit is the number of clients under QMI. Two WDS clients are typically required for each active context, one for IPv4 and one for IPv6. The total number of clients cannot exceed 255 (uint8).

---
 plugins/gobi.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
plugins/gobi.c +15 -4
index 88e4c7fc4887..b6df849de47e 100644
@@ -55,6 +55,8 @@
 #define GOBI_VOICE	(1 << 6)
 #define GOBI_WDA	(1 << 7)
 
+#define MAX_CONTEXTS 4
+
 struct service_request {
 	struct qmi_service **member;
 	uint32_t service_type;
@@ -75,6 +77,7 @@ struct gobi_data {
 	int num_service_requests;
 	unsigned long features;
 	unsigned int discover_attempts;
+	uint8_t n_premux;
 	uint8_t oper_mode;
 	int main_net_ifindex;
 	char main_net_name[IFNAMSIZ];
@@ -124,6 +127,7 @@ static int gobi_probe(struct ofono_modem *modem)
 	const char *ifname;
 	int ifindex;
 	const char *bus;
+	int n_premux;
 
 	DBG("%p", modem);
 
@@ -132,10 +136,11 @@ static int gobi_probe(struct ofono_modem *modem)
 	ifname = ofono_modem_get_string(modem, "NetworkInterface");
 	ifindex = ofono_modem_get_integer(modem, "NetworkInterfaceIndex");
 	bus = ofono_modem_get_string(modem, "Bus");
+	n_premux = ofono_modem_get_integer(modem, "NumPremuxInterfaces");
 
 	DBG("net: %s[%s](%d) %s", ifname, if_driver, ifindex, bus);
 
-	if (!if_driver || !ifname || !ifindex || !bus)
+	if (!if_driver || !ifname || !ifindex || !bus || n_premux < 0)
 		return -EPROTO;
 
 	data = l_new(struct gobi_data, 1);
@@ -145,6 +150,13 @@ static int gobi_probe(struct ofono_modem *modem)
 	else if (!strcmp(if_driver, "qmi_wwan"))
 		data->using_qmi_wwan = true;
 
+	if (n_premux > MAX_CONTEXTS) {
+		l_warn("NumPremuxInterfaces > %d, limiting to %d",
+				MAX_CONTEXTS, MAX_CONTEXTS);
+		n_premux = MAX_CONTEXTS;
+	}
+
+	data->n_premux = n_premux;
 	data->main_net_ifindex =
 		ofono_modem_get_integer(modem, "NetworkInterfaceIndex");
 	l_strlcpy(data->main_net_name,
@@ -753,7 +765,6 @@ static void gobi_pre_sim(struct ofono_modem *modem)
 static void gobi_setup_gprs(struct ofono_modem *modem)
 {
 	struct gobi_data *data = ofono_modem_get_data(modem);
-	int n_premux = ofono_modem_get_integer(modem, "NumPremuxInterfaces");
 	struct ofono_gprs *gprs;
 	struct ofono_gprs_context *gc;
 	const char *interface;
@@ -770,7 +781,7 @@ static void gobi_setup_gprs(struct ofono_modem *modem)
 	}
 
 	/* Simple case of 802.3 interface, no QMAP */
-	if (n_premux == 0) {
+	if (data->n_premux == 0) {
 		interface = ofono_modem_get_string(modem, "NetworkInterface");
 
 		gc = ofono_gprs_context_create(modem, 0, "qmimodem", -1,
@@ -793,7 +804,7 @@ static void gobi_setup_gprs(struct ofono_modem *modem)
 		ofono_modem_get_integer(modem, "MaxAggregationSize");
 	DBG("max_aggregation_size: %u", data->max_aggregation_size);
 
-	for (i = 0; i < n_premux; i++) {
+	for (i = 0; i < data->n_premux; i++) {
 		int mux_id;
 
 		sprintf(buf, "PremuxInterface%dMuxId", i + 1);
Signature · 1 line
2.45.2
#4 lore raw

Re: [PATCH v2 04/11] gobi: Limit number of premultiplexed contexts to 4

Quoted 9 lines · Denis Kenzior

4 was chosen somewhat arbitrarily, but it is the maximum that the qmi_wwan_q driver can support out of the box. The only limit is the number of clients under QMI. Two WDS clients are typically required for each active context, one for IPv4 and one for IPv6. The total number of clients cannot exceed 255 (uint8).

---
  plugins/gobi.c | 19 +++++++++++++++----
  1 file changed, 15 insertions(+), 4 deletions(-)

This set should be ignored. Sorry for the noise.

#5 lore raw

PATCH v2 5/11 gobi: Request dedicated WDS services for contexts

In reply to Denis Kenzior

Each context the modem supports (up to MAX_CONTEXTS) will require two dedicated WDS services. One will manage the IPv4 configuration, the other will manage IPv6 configuration.

---
 plugins/gobi.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)
plugins/gobi.c +22 -1
index b6df849de47e..76e1e133860d 100644
@@ -72,7 +72,11 @@ struct gobi_data {
 	struct qmi_service *voice;
 	struct qmi_service *pds;
 	struct qmi_service *uim;
-	struct service_request service_requests[16];
+	struct {
+		struct qmi_service *wds_ipv4;
+		struct qmi_service *wds_ipv6;
+	} context_services[MAX_CONTEXTS];
+	struct service_request service_requests[8 + MAX_CONTEXTS * 2];
 	int cur_service_request;
 	int num_service_requests;
 	unsigned long features;
@@ -170,6 +174,8 @@ static int gobi_probe(struct ofono_modem *modem)
 
 static void cleanup_services(struct gobi_data *data)
 {
+	int i;
+
 	qmi_service_free(data->dms);
 	data->dms = NULL;
 
@@ -193,6 +199,13 @@ static void cleanup_services(struct gobi_data *data)
 
 	qmi_service_free(data->uim);
 	data->uim = NULL;
+
+	for (i = 0; i < MAX_CONTEXTS; i++) {
+		qmi_service_free(data->context_services[i].wds_ipv4);
+		qmi_service_free(data->context_services[i].wds_ipv6);
+	}
+
+	memset(&data->context_services, 0, sizeof(data->context_services));
 }
 
 static void gobi_remove(struct ofono_modem *modem)
@@ -489,6 +502,7 @@ static void discover_cb(void *user_data)
 	struct gobi_data *data = ofono_modem_get_data(modem);
 	uint16_t major;
 	uint16_t minor;
+	int i;
 
 	DBG("");
 
@@ -538,6 +552,13 @@ static void discover_cb(void *user_data)
 	if (data->features & GOBI_UIM)
 		add_service_request(data, &data->uim, QMI_SERVICE_UIM);
 
+	for (i = 0; i < (data->n_premux ? data->n_premux : 1); i++) {
+		add_service_request(data, &data->context_services[i].wds_ipv4,
+							QMI_SERVICE_WDS);
+		add_service_request(data, &data->context_services[i].wds_ipv6,
+							QMI_SERVICE_WDS);
+	}
+
 	if (qmi_qmux_device_create_client(data->device, QMI_SERVICE_DMS,
 					request_service_cb, modem, NULL) > 0)
 		return;
Signature · 1 line
2.45.2
#6 lore raw

PATCH v2 6/11 qmi: Enable _auto_ use for some classes

In reply to Denis Kenzior

This enables ell _auto_ keyword use with qmi_service_free and qmi_param_free.

---
 drivers/qmimodem/qmi.h | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/qmimodem/qmi.h +6 -0
index 0e48313ebb64..69698ee049c6 100644
@@ -5,6 +5,8 @@
  * SPDX-License-Identifier: GPL-2.0-only
  */
 
+#include <ell/cleanup.h>
+
 #include <stdbool.h>
 #include <stdint.h>
 
@@ -110,6 +112,8 @@ struct qmi_param;
 struct qmi_param *qmi_param_new(void);
 void qmi_param_free(struct qmi_param *param);
 
+DEFINE_CLEANUP_FUNC(qmi_param_free)
+
 bool qmi_param_append(struct qmi_param *param, uint8_t type,
 					uint16_t length, const void *data);
 bool qmi_param_append_uint8(struct qmi_param *param, uint8_t type,
@@ -146,6 +150,8 @@ int qmi_error_to_ofono_cme(int qmi_error);
 struct qmi_service *qmi_service_clone(struct qmi_service *service);
 void qmi_service_free(struct qmi_service *service);
 
+DEFINE_CLEANUP_FUNC(qmi_service_free)
+
 const char *qmi_service_get_identifier(struct qmi_service *service);
 bool qmi_service_get_version(struct qmi_service *service, uint8_t *out_version);
 
Signature · 1 line
2.45.2
#7 lore raw

PATCH v2 7/11 qmi: gprs-context: Declare qmi_service objects using _auto_

In reply to Denis Kenzior

This simplifies the error paths slightly.

---
 drivers/qmimodem/gprs-context.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/qmimodem/gprs-context.c +4 -5
index 3c18476142ea..7d13889bf603 100644
@@ -554,7 +554,8 @@ static int qmi_gprs_context_probev(struct ofono_gprs_context *gc,
 					unsigned int vendor, va_list args)
 {
 	int mux_id = va_arg(args, int);
-	struct qmi_service *wds = va_arg(args, struct qmi_service *);
+	_auto_(qmi_service_free) struct qmi_service *wds =
+					va_arg(args, struct qmi_service *);
 	struct gprs_context_data *data;
 
 	DBG("");
@@ -562,14 +563,12 @@ static int qmi_gprs_context_probev(struct ofono_gprs_context *gc,
 	if (mux_id != -1) {
 		int r = qmi_gprs_context_bind_mux(gc, wds, mux_id);
 
-		if (r < 0) {
-			qmi_service_free(wds);
+		if (r < 0)
 			return r;
-		}
 	}
 
 	data = l_new(struct gprs_context_data, 1);
-	data->wds = wds;
+	data->wds = l_steal_ptr(wds);
 	data->mux_id = mux_id;
 
 	qmi_service_register(data->wds, QMI_WDS_PACKET_SERVICE_STATUS,
Signature · 1 line
2.45.2
#8 lore raw

PATCH v2 8/11 qmi: Pass two dedicated WDS services to gprs-context

In reply to Denis Kenzior

gprs-context driver will not take two qmi_service objects, each with a dedicated WDS service. This will allow gprs-context to support dual stack (ipv4 + ipv6) contexts (in future commits). For now, the behavior is left unchanged with the second qmi_service being destroyed.

---
 drivers/qmimodem/gprs-context.c |  8 +++++---
 plugins/gobi.c                  | 11 +++++++++--
 plugins/qrtrqmi.c               |  7 +++++--
 3 files changed, 19 insertions(+), 7 deletions(-)
drivers/qmimodem/gprs-context.c +5 -3
index 7d13889bf603..5582a8052c0b 100644
@@ -554,21 +554,23 @@ static int qmi_gprs_context_probev(struct ofono_gprs_context *gc,
 					unsigned int vendor, va_list args)
 {
 	int mux_id = va_arg(args, int);
-	_auto_(qmi_service_free) struct qmi_service *wds =
+	_auto_(qmi_service_free) struct qmi_service *ipv4 =
+					va_arg(args, struct qmi_service *);
+	_auto_(qmi_service_free) struct qmi_service *ipv6 =
 					va_arg(args, struct qmi_service *);
 	struct gprs_context_data *data;
 
 	DBG("");
 
 	if (mux_id != -1) {
-		int r = qmi_gprs_context_bind_mux(gc, wds, mux_id);
+		int r = qmi_gprs_context_bind_mux(gc, ipv4, mux_id);
 
 		if (r < 0)
 			return r;
 	}
 
 	data = l_new(struct gprs_context_data, 1);
-	data->wds = l_steal_ptr(wds);
+	data->wds = l_steal_ptr(ipv4);
 	data->mux_id = mux_id;
 
 	qmi_service_register(data->wds, QMI_WDS_PACKET_SERVICE_STATUS,
plugins/gobi.c +9 -2
index 76e1e133860d..cb20824cc424 100644
@@ -803,10 +803,14 @@ static void gobi_setup_gprs(struct ofono_modem *modem)
 
 	/* Simple case of 802.3 interface, no QMAP */
 	if (data->n_premux == 0) {
+		struct qmi_service *ipv4 = data->context_services[0].wds_ipv4;
+		struct qmi_service *ipv6 = data->context_services[0].wds_ipv6;
+
 		interface = ofono_modem_get_string(modem, "NetworkInterface");
 
 		gc = ofono_gprs_context_create(modem, 0, "qmimodem", -1,
-						qmi_service_clone(data->wds));
+						qmi_service_clone(ipv4),
+						qmi_service_clone(ipv6));
 		if (!gc) {
 			ofono_warn("Unable to create gprs-context for: %s",
 					ofono_modem_get_path(modem));
@@ -826,13 +830,16 @@ static void gobi_setup_gprs(struct ofono_modem *modem)
 	DBG("max_aggregation_size: %u", data->max_aggregation_size);
 
 	for (i = 0; i < data->n_premux; i++) {
+		struct qmi_service *ipv4 = data->context_services[i].wds_ipv4;
+		struct qmi_service *ipv6 = data->context_services[i].wds_ipv6;
 		int mux_id;
 
 		sprintf(buf, "PremuxInterface%dMuxId", i + 1);
 		mux_id = ofono_modem_get_integer(modem, buf);
 
 		gc = ofono_gprs_context_create(modem, 0, "qmimodem", mux_id,
-						qmi_service_clone(data->wds));
+						qmi_service_clone(ipv4),
+						qmi_service_clone(ipv6));
 
 		if (!gc) {
 			ofono_warn("gprs-context creation failed for [%d] %s",
plugins/qrtrqmi.c +5 -2
index b64ab355a2e8..21103371046a 100644
@@ -324,10 +324,13 @@ static int setup_gprs_context(uint8_t mux_id, const char *interface,
 	struct ofono_modem *modem = ofono_gprs_get_modem(gprs);
 	struct qrtrqmi_data *data = ofono_modem_get_data(modem);
 	struct qmi_qrtr_node *node = data->node;
+	struct qmi_service *ipv4 = qmi_qrtr_node_get_dedicated_service(node,
+								QMI_SERVICE_WDS);
+	struct qmi_service *ipv6 = qmi_qrtr_node_get_dedicated_service(node,
+								QMI_SERVICE_WDS);
 	struct ofono_gprs_context *gc;
 
-	gc = ofono_gprs_context_create(modem, 0, "qmimodem", mux_id,
-			qmi_qrtr_node_get_service(node, QMI_SERVICE_WDS));
+	gc = ofono_gprs_context_create(modem, 0, "qmimodem", mux_id, ipv4, ipv6);
 	if (!gc) {
 		ofono_warn("Unable to create gprs-context for: %s, %s[%u]",
 				ofono_modem_get_path(modem), interface, mux_id);
Signature · 1 line
2.45.2
#9 lore raw

PATCH v2 9/11 qmi: gprs-context: Remove parsing of unused TLVs

In reply to Denis Kenzior

The information from these TLVs is currently unused and only printed to debug output. Same can be accomplished using an external sniffer. Remove this code until the information in these TLVs is needed for something.

---
 drivers/qmimodem/gprs-context.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)
drivers/qmimodem/gprs-context.c +1 -13
index 5582a8052c0b..f29f10720710 100644
@@ -173,29 +173,17 @@ static void get_settings_ipv4(struct ofono_gprs_context *gc,
 
 static void get_settings_cb(struct qmi_result *result, void *user_data)
 {
-	static const uint8_t RESULT_PDP_TYPE = 0x11;	/* uint8 */
-	static const uint8_t RESULT_APN = 0x14;		/* string */
 	static const uint8_t RESULT_IP_FAMILY = 0x2b;	/* uint8 */
 	struct cb_data *cbd = user_data;
 	ofono_gprs_context_cb_t cb = cbd->cb;
 	struct ofono_gprs_context *gc = cbd->user;
-	uint8_t pdp_type, ip_family;
-	char *apn;
+	uint8_t ip_family;
 
 	DBG("");
 
 	if (qmi_result_set_error(result, NULL))
 		goto done;
 
-	apn = qmi_result_get_string(result, RESULT_APN);
-	if (apn) {
-		DBG("APN: %s", apn);
-		l_free(apn);
-	}
-
-	if (qmi_result_get_uint8(result, RESULT_PDP_TYPE, &pdp_type))
-		DBG("PDP type %d", pdp_type);
-
 	if (!qmi_result_get_uint8(result, RESULT_IP_FAMILY, &ip_family)) {
 		ofono_error("No IP family in results");
 		goto done;
Signature · 1 line
2.45.2
#10 lore raw

PATCH v2 10/11 qmi: gprs-context: Treat IP family TLV as mandatory

In reply to Denis Kenzior

Also, while here, coalesce two debugging statements into one.

---
 drivers/qmimodem/gprs-context.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/qmimodem/gprs-context.c +3 -3
index f29f10720710..203a320a42af 100644
@@ -46,10 +46,10 @@ static void pkt_status_notify(struct qmi_result *result, void *user_data)
 	if (!status)
 		return;
 
-	DBG("conn status %d", status->status);
+	if (!qmi_result_get_uint8(result, RESULT_IP_FAMILY, &ip_family))
+		return;
 
-	if (qmi_result_get_uint8(result, RESULT_IP_FAMILY, &ip_family))
-		DBG("ip family %d", ip_family);
+	DBG("conn status %d ip family %d", status->status, ip_family);
 
 	switch (status->status) {
 	case QMI_WDS_CONNECTION_STATUS_DISCONNECTED:
Signature · 1 line
2.45.2
#11 lore raw

PATCH v2 11/11 qmi: gprs-context: Set up WDS service for IPv6

In reply to Denis Kenzior

Track and take ownership of the passed in WDS service meant for IPv6 connectivity. The WDS service should be bound to a particular endpoint / mux_id and register to the same indication types as the other WDS service being utilized.

Additionally, WDS services are created with IPv4 as the default family preference. To support dual-stack bearers, the WDS service managing IPv6 requires 'Set IP Family Preference' command to be issued with the IPv6 family preference set.

---
 drivers/qmimodem/gprs-context.c | 51 ++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)
drivers/qmimodem/gprs-context.c +50 -1
index 203a320a42af..456f46ead6d5 100644
@@ -22,6 +22,7 @@
 
 struct gprs_context_data {
 	struct qmi_service *wds;
+	struct qmi_service *ipv6;
 	unsigned int active_context;
 	uint32_t pkt_handle;
 	uint8_t mux_id;
@@ -454,6 +455,37 @@ static void qmi_gprs_context_detach_shutdown(struct ofono_gprs_context *gc,
 	qmi_deactivate_primary(gc, cid, NULL, NULL);
 }
 
+static void set_ip_family_preference_cb(struct qmi_result *result,
+							void *user_data)
+{
+	struct ofono_gprs_context *gc = user_data;
+	uint16_t error;
+
+	if (!qmi_result_set_error(result, &error))
+		error = 0;
+
+	DBG("%u", error);
+
+	if (error)
+		ofono_gprs_context_remove(gc);
+}
+
+static int set_ip_family_preference(struct ofono_gprs_context *gc,
+						struct qmi_service *wds,
+						uint8_t family)
+{
+	static const uint8_t PARAM_IP_FAMILY_PREFERENCE = 0x01;
+	struct qmi_param *param =
+			qmi_param_new_uint8(PARAM_IP_FAMILY_PREFERENCE, family);
+
+	if (qmi_service_send(wds, QMI_WDS_SET_IP_FAMILY, param,
+				set_ip_family_preference_cb, gc, NULL) > 0)
+		return 0;
+
+	qmi_param_free(param);
+	return -EIO;
+}
+
 static void bind_mux_data_port_cb(struct qmi_result *result, void *user_data)
 {
 	struct ofono_gprs_context *gc = user_data;
@@ -547,22 +579,38 @@ static int qmi_gprs_context_probev(struct ofono_gprs_context *gc,
 	_auto_(qmi_service_free) struct qmi_service *ipv6 =
 					va_arg(args, struct qmi_service *);
 	struct gprs_context_data *data;
+	int r;
 
 	DBG("");
 
 	if (mux_id != -1) {
-		int r = qmi_gprs_context_bind_mux(gc, ipv4, mux_id);
+		r = qmi_gprs_context_bind_mux(gc, ipv4, mux_id);
+		if (r < 0)
+			return r;
 
+		r = qmi_gprs_context_bind_mux(gc, ipv6, mux_id);
 		if (r < 0)
 			return r;
 	}
 
+	/*
+	 * Default family preference for new WDS services is IPv4.  For the
+	 * service used for IPv6 contexts, issue a SET_IP_FAMILY_PREFERENCE
+	 * command
+	 */
+	r = set_ip_family_preference(gc, ipv6, QMI_WDS_IP_FAMILY_IPV6);
+	if (r < 0)
+		return r;
+
 	data = l_new(struct gprs_context_data, 1);
 	data->wds = l_steal_ptr(ipv4);
+	data->ipv6 = l_steal_ptr(ipv6);
 	data->mux_id = mux_id;
 
 	qmi_service_register(data->wds, QMI_WDS_PACKET_SERVICE_STATUS,
 					pkt_status_notify, gc, NULL);
+	qmi_service_register(data->ipv6, QMI_WDS_PACKET_SERVICE_STATUS,
+					pkt_status_notify, gc, NULL);
 
 	ofono_gprs_context_set_data(gc, data);
 
@@ -578,6 +626,7 @@ static void qmi_gprs_context_remove(struct ofono_gprs_context *gc)
 	ofono_gprs_context_set_data(gc, NULL);
 
 	qmi_service_free(data->wds);
+	qmi_service_free(data->ipv6);
 	l_free(data);
 }
 
Signature · 1 line
2.45.2
#12 lore raw
In reply to Denis Kenzior
This series was applied to ofono.git (master) by Denis Kenzior <[email protected]>:

Hello:

This series was applied to ofono.git (master)
by Denis Kenzior <[email protected]>:

Quoted 7 lines · On Thu, 11 Jul 2024 11:46:18 -0500 you wrote:

From: Steve Schrock <[email protected]>

Even when the gps variable was set, it was not actually used for anything.

---
 plugins/udevng.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

Here is the summary with links:
- [v2,01/11] udevng: Remove gps from setup_gobi
(no matching commit)
- [v2,02/11] build: Require at least version 0.67 when building with external ELL (no matching commit)
- [v2,03/11] Release 2.9
(no matching commit)
- [v2,04/11] gobi: Limit number of premultiplexed contexts to 4
(no matching commit)
- [v2,05/11] gobi: Request dedicated WDS services for contexts
(no matching commit)
- [v2,06/11] qmi: Enable _auto_ use for some classes
(no matching commit)
- [v2,07/11] qmi: gprs-context: Declare qmi_service objects using _auto_ (no matching commit)
- [v2,08/11] qmi: Pass two dedicated WDS services to gprs-context (no matching commit)
- [v2,09/11] qmi: gprs-context: Remove parsing of unused TLVs
(no matching commit)
- [v2,10/11] qmi: gprs-context: Treat IP family TLV as mandatory
(no matching commit)
- [v2,11/11] qmi: gprs-context: Set up WDS service for IPv6

    https://git.kernel.org/pub/scm/network/ofono/ofono.git/?id=c09e6bebe703

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html