Skip to contentSkip to conversation

Universal Payload initial series

PATCH Superseded Simon Glass 6 participants 41 messages Jul 13, 2024 – Aug 7, 2024

Subsystems (5)
USB Block layer Kbuild Library code +1 more subsystems

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover Universal Payload initial series

Universal Payload (UPL) is an Industry Standard for firmware components[1]. UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

[1] https://universalpayload.github.io/spec/
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=414642

Changes in v2:
- Put the upl tests under their own subcommand to avoid bootstd init
- Add a function to init the UPL process in SPL
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL
- Add a link to the spec
- Add a link to the command
- Support CI testing
- Rework to use alist instead of fixed-length arrays

Simon Glass (21):
sandbox: Use const in os_jump_to_file()
sandbox: Fix a comment in os_find_u_boot()
test: Move some SPL-loading test-code into sandbox common
sandbox: Enable SPL_LOAD_BLOCK
fdt: Don't overwrite bloblist devicetree
sandbox: fdt: Avoid overwriting an existing fdt
sandbox: Return error code from read/write/seek
sandbox: Add ELF file to VPL u-boot.img
sandbox: Set up global_data earlier
upl: Add support for reading a upl handoff
upl: Add support for writing a upl handoff
upl: Add basic tests
upl: Add a command
upl: Add support for Universal Payload in SPL
spl: Plumb in the Universal Payload handoff
upl: Plumb in universal payload to the init process
sandbox_vpl: Enable Universal Payload
upl: Add initial documentation
sandbox: Add a flag to enable UPL
sandbox: Add an SPL loader for UPL
upl: Add an end-to-end test

 MAINTAINERS                       |  13 +
 Makefile                          |   4 +-
 arch/sandbox/cpu/cpu.c            |   2 +
 arch/sandbox/cpu/os.c             |  30 +-
 arch/sandbox/cpu/spl.c            | 116 +++++-
 arch/sandbox/cpu/start.c          |  18 +-
 arch/sandbox/include/asm/spl.h    |  15 +
 arch/sandbox/include/asm/state.h  |   1 +
 boot/Kconfig                      |  70 ++++
 boot/Makefile                     |   4 +
 boot/upl_common.c                 |  60 +++
 boot/upl_common.h                 |  24 ++
 boot/upl_read.c                   | 588 ++++++++++++++++++++++++++++
 boot/upl_write.c                  | 622 ++++++++++++++++++++++++++++++
 cmd/Kconfig                       |   7 +
 cmd/Makefile                      |   1 +
 cmd/upl.c                         | 118 ++++++
 common/board_f.c                  |  22 ++
 common/board_r.c                  |   2 +
 common/spl/Kconfig                |   1 +
 common/spl/Makefile               |   2 +
 common/spl/spl.c                  |   8 +
 common/spl/spl_fit.c              |  22 ++
 common/spl/spl_upl.c              | 171 ++++++++
 configs/sandbox_defconfig         |   1 +
 configs/sandbox_vpl_defconfig     |   4 +
 doc/usage/cmd/upl.rst             | 186 +++++++++
 doc/usage/index.rst               |   2 +
 doc/usage/upl.rst                 |  46 +++
 drivers/block/sandbox.c           |   4 +-
 drivers/usb/emul/sandbox_flash.c  |   2 +-
 fs/sandbox/sandboxfs.c            |   6 +-
 include/asm-generic/global_data.h |  19 +
 include/os.h                      |   6 +-
 include/spl.h                     |  16 +
 include/test/suites.h             |   1 +
 include/upl.h                     | 361 +++++++++++++++++
 lib/fdtdec.c                      |   1 +
 test/boot/Makefile                |   2 +
 test/boot/upl.c                   | 436 +++++++++++++++++++++
 test/cmd_ut.c                     |   3 +
 test/image/spl_load_os.c          |  53 +--
 test/py/tests/test_upl.py         |  38 ++
 43 files changed, 3036 insertions(+), 72 deletions(-)
 create mode 100644 boot/upl_common.c
 create mode 100644 boot/upl_common.h
 create mode 100644 boot/upl_read.c
 create mode 100644 boot/upl_write.c
 create mode 100644 cmd/upl.c
 create mode 100644 common/spl/spl_upl.c
 create mode 100644 doc/usage/cmd/upl.rst
 create mode 100644 doc/usage/upl.rst
 create mode 100644 include/upl.h
 create mode 100644 test/boot/upl.c
 create mode 100644 test/py/tests/test_upl.py
Signature · 1 line
2.34.1
#1 lore raw

PATCH v2 1/21 sandbox: Use const in os_jump_to_file()

The argument array is not changed by the callee, so mark it const.

---

(no changes since v1)

 arch/sandbox/cpu/os.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/sandbox/cpu/os.c +2 -2
index d7869b2e368..6a8a5e7b89b 100644
@@ -808,7 +808,7 @@ static int make_exec(char *fname, const void *data, int size)
  * @count: Number of arguments in @add_args
  * Return: 0 if OK, -ENOMEM if out of memory
  */
-static int add_args(char ***argvp, char *add_args[], int count)
+static int add_args(char ***argvp, const char *add_args[], int count)
 {
 	char **argv, **ap;
 	int argc;
@@ -859,7 +859,7 @@ static int os_jump_to_file(const char *fname, bool delete_it)
 	struct sandbox_state *state = state_get_current();
 	char mem_fname[30];
 	int fd, err;
-	char *extra_args[5];
+	const char *extra_args[5];
 	char **argv = state->argv;
 	int argc;
 #ifdef DEBUG
Signature · 1 line
2.34.1
Reviewed-by on v2 1/21
#2 lore raw

Re: [PATCH v2 01/21] sandbox: Use const in os_jump_to_file()

Hi Simon,

Thank you for the patch.

Quoted 3 lines · Simon Glass

The argument array is not changed by the callee, so mark it const.

Quoted 31 lines

---

(no changes since v1)

 arch/sandbox/cpu/os.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/sandbox/cpu/os.c +2 -2
index d7869b2e368..6a8a5e7b89b 100644
@@ -808,7 +808,7 @@ static int make_exec(char *fname, const void *data, int size)
  * @count: Number of arguments in @add_args
  * Return: 0 if OK, -ENOMEM if out of memory
  */
-static int add_args(char ***argvp, char *add_args[], int count)
+static int add_args(char ***argvp, const char *add_args[], int count)
 {
 	char **argv, **ap;
 	int argc;
@@ -859,7 +859,7 @@ static int os_jump_to_file(const char *fname, bool delete_it)
 	struct sandbox_state *state = state_get_current();
 	char mem_fname[30];
 	int fd, err;
-	char *extra_args[5];
+	const char *extra_args[5];
 	char **argv = state->argv;
 	int argc;
 #ifdef DEBUG
Signature · 1 line
2.34.1
#3 lore raw

PATCH v2 2/21 sandbox: Fix a comment in os_find_u_boot()

In reply to Simon Glass

Fix a missing dot in a comment, since '..' is confusing.

---

(no changes since v1)

 arch/sandbox/cpu/os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sandbox/cpu/os.c +1 -1
index 6a8a5e7b89b..1491d00504d 100644
@@ -964,7 +964,7 @@ int os_find_u_boot(char *fname, int maxlen, bool use_img,
 	p = strstr(fname, subdir);
 	if (p) {
 		if (*next_prefix)
-			/* e.g. ".../tpl/u-boot-spl"  to "../spl/u-boot-spl" */
+			/* e.g. ".../tpl/u-boot-spl"  to ".../spl/u-boot-spl" */
 			memcpy(p + 1, next_prefix, strlen(next_prefix));
 		else
 			/* e.g. ".../spl/u-boot" to ".../u-boot" */
Signature · 1 line
2.34.1
Reviewed-by on v2 2/21
#4 lore raw

Re: [PATCH v2 02/21] sandbox: Fix a comment in os_find_u_boot()

Hi Simon,

Thank you for the patch.

Quoted 3 lines · Simon Glass

Fix a missing dot in a comment, since '..' is confusing.

Quoted 22 lines

---

(no changes since v1)

 arch/sandbox/cpu/os.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/sandbox/cpu/os.c +1 -1
index 6a8a5e7b89b..1491d00504d 100644
@@ -964,7 +964,7 @@ int os_find_u_boot(char *fname, int maxlen, bool use_img,
 	p = strstr(fname, subdir);
 	if (p) {
 		if (*next_prefix)
-			/* e.g. ".../tpl/u-boot-spl"  to "../spl/u-boot-spl" */
+			/* e.g. ".../tpl/u-boot-spl"  to ".../spl/u-boot-spl" */
 			memcpy(p + 1, next_prefix, strlen(next_prefix));
 		else
 			/* e.g. ".../spl/u-boot" to ".../u-boot" */
Signature · 1 line
2.34.1
#5 lore raw

PATCH v2 3/21 test: Move some SPL-loading test-code into sandbox common

In reply to Simon Glass

This code is useful for loading an image in sandbox_spl so move it into a place where it can be called as needed.

---

(no changes since v1)

 arch/sandbox/cpu/spl.c         | 67 ++++++++++++++++++++++++++++++++++
 arch/sandbox/include/asm/spl.h | 14 +++++++
 test/image/spl_load_os.c       | 53 +--------------------------
 3 files changed, 82 insertions(+), 52 deletions(-)
arch/sandbox/cpu/spl.c +67 -0
index 9ad9da686c6..caa8e0b3b01 100644
@@ -6,6 +6,7 @@
 #include <dm.h>
 #include <hang.h>
 #include <handoff.h>
+#include <image.h>
 #include <init.h>
 #include <log.h>
 #include <os.h>
@@ -179,3 +180,69 @@ int handoff_arch_save(struct spl_handoff *ho)
 
 	return 0;
 }
+
+/* Context used to hold file descriptor */
+struct load_ctx {
+	int fd;
+};
+
+static ulong read_fit_image(struct spl_load_info *load, ulong offset,
+			    ulong size, void *buf)
+{
+	struct load_ctx *load_ctx = load->priv;
+	off_t ret;
+	ssize_t res;
+
+	ret = os_lseek(load_ctx->fd, offset, OS_SEEK_SET);
+	if (ret < 0) {
+		printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
+		       ret, errno);
+		return log_msg_ret("lse", ret);
+	}
+
+	res = os_read(load_ctx->fd, buf, size);
+	if (res < 0) {
+		printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
+		       size, res, errno);
+		return log_msg_ret("osr", res);
+	}
+
+	return size;
+}
+
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
+{
+	struct legacy_img_hdr *header;
+	struct load_ctx load_ctx;
+	struct spl_load_info load;
+	int ret;
+	int fd;
+
+	memset(&load, '\0', sizeof(load));
+	spl_set_bl_len(&load, 512);
+	load.read = read_fit_image;
+
+	ret = sandbox_find_next_phase(fname, maxlen, true);
+	if (ret) {
+		printf("%s not found, error %d\n", fname, ret);
+		return log_msg_ret("nph", ret);
+	}
+
+	header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+
+	log_debug("reading from %s\n", fname);
+	fd = os_open(fname, OS_O_RDONLY);
+	if (fd < 0)
+		return log_msg_ret("ope", -ENOENT);
+	if (os_read(fd, header, 512) != 512)
+		return log_msg_ret("rea", -EIO);
+	load_ctx.fd = fd;
+
+	load.priv = &load_ctx;
+
+	ret = spl_load_simple_fit(image, &load, 0, header);
+	if (ret)
+		return log_msg_ret("slf", ret);
+
+	return 0;
+}
arch/sandbox/include/asm/spl.h +14 -0
index 4fab24cd156..d50d9ad6b48 100644
@@ -6,6 +6,8 @@
 #ifndef __asm_spl_h
 #define __asm_spl_h
 
+struct spl_image_info;
+
 enum {
 	BOOT_DEVICE_MMC1,
 	BOOT_DEVICE_MMC2,
@@ -31,4 +33,16 @@ enum {
  */
 int sandbox_find_next_phase(char *fname, int maxlen, bool use_img);
 
+/**
+ * sandbox_spl_load_fit() - Load the next phase from a FIT
+ *
+ * Loads a FIT containing the next phase and sets it up for booting
+ *
+ * @fname: Returns filename loaded
+ * @maxlen: Maximum length for @fname including \0
+ * @image: Place to put SPL-image information
+ * Return: 0 if OK, -ve on error
+ */
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image);
+
 #endif
test/image/spl_load_os.c +1 -52

64 lines not on this page · raw message

Signature · 1 line
2.34.1
#6 lore raw

Re: [PATCH v2 03/21] test: Move some SPL-loading test-code into sandbox common

Quoted 73 lines · Simon Glass

This code is useful for loading an image in sandbox_spl so move it into a place where it can be called as needed.

---

(no changes since v1)

  arch/sandbox/cpu/spl.c         | 67 ++++++++++++++++++++++++++++++++++
  arch/sandbox/include/asm/spl.h | 14 +++++++
  test/image/spl_load_os.c       | 53 +--------------------------
  3 files changed, 82 insertions(+), 52 deletions(-)
arch/sandbox/cpu/spl.c +45 -0
index 9ad9da686c6..caa8e0b3b01 100644
@@ -6,6 +6,7 @@
  #include <dm.h>
  #include <hang.h>
  #include <handoff.h>
+#include <image.h>
  #include <init.h>
  #include <log.h>
  #include <os.h>
@@ -179,3 +180,69 @@ int handoff_arch_save(struct spl_handoff *ho)
 
  	return 0;
  }
+
+/* Context used to hold file descriptor */
+struct load_ctx {
+	int fd;
+};
+
+static ulong read_fit_image(struct spl_load_info *load, ulong offset,
+			    ulong size, void *buf)
+{
+	struct load_ctx *load_ctx = load->priv;
+	off_t ret;
+	ssize_t res;
+
+	ret = os_lseek(load_ctx->fd, offset, OS_SEEK_SET);
+	if (ret < 0) {
+		printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
+		       ret, errno);
+		return log_msg_ret("lse", ret);
+	}
+
+	res = os_read(load_ctx->fd, buf, size);
+	if (res < 0) {
+		printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
+		       size, res, errno);
+		return log_msg_ret("osr", res);
+	}
+
+	return size;
+}
+
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
+{
+	struct legacy_img_hdr *header;
+	struct load_ctx load_ctx;
+	struct spl_load_info load;
+	int ret;
+	int fd;
+
+	memset(&load, '\0', sizeof(load));
+	spl_set_bl_len(&load, 512);
+	load.read = read_fit_image;
+
+	ret = sandbox_find_next_phase(fname, maxlen, true);
+	if (ret) {

arch/sandbox/cpu/spl.c int handoff_arch_save(struct spl_handoff *ho) · line 236

Quoted 10 lines
arch/sandbox/cpu/spl.c +10 -0
+		printf("%s not found, error %d\n", fname, ret);
+		return log_msg_ret("nph", ret);
+	}
+
+	header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
+
+	log_debug("reading from %s\n", fname);
+	fd = os_open(fname, OS_O_RDONLY);
+	if (fd < 0)
+		return log_msg_ret("ope", -ENOENT);

should return errno

and I think longer messages won't hurt (this is sandbox after all).

arch/sandbox/cpu/spl.c int handoff_arch_save(struct spl_handoff *ho) · line 237

Quoted 1 line
arch/sandbox/cpu/spl.c +1 -0
+	if (os_read(fd, header, 512) != 512)

Actually, this should probably be sizeof(*header) and not 512

arch/sandbox/cpu/spl.c int handoff_arch_save(struct spl_handoff *ho) · line 238

Quoted 1 line
arch/sandbox/cpu/spl.c +1 -0
+		return log_msg_ret("rea", -EIO);

ditto errno/message

Quoted 109 lines
arch/sandbox/cpu/spl.c +10 -0
+	load_ctx.fd = fd;
+
+	load.priv = &load_ctx;
+
+	ret = spl_load_simple_fit(image, &load, 0, header);
+	if (ret)
+		return log_msg_ret("slf", ret);
+
+	return 0;
+}
arch/sandbox/include/asm/spl.h +14 -0
index 4fab24cd156..d50d9ad6b48 100644
@@ -6,6 +6,8 @@
  #ifndef __asm_spl_h
  #define __asm_spl_h
 
+struct spl_image_info;
+
  enum {
  	BOOT_DEVICE_MMC1,
  	BOOT_DEVICE_MMC2,
@@ -31,4 +33,16 @@ enum {
   */
  int sandbox_find_next_phase(char *fname, int maxlen, bool use_img);
 
+/**
+ * sandbox_spl_load_fit() - Load the next phase from a FIT
+ *
+ * Loads a FIT containing the next phase and sets it up for booting
+ *
+ * @fname: Returns filename loaded
+ * @maxlen: Maximum length for @fname including \0
+ * @image: Place to put SPL-image information
+ * Return: 0 if OK, -ve on error
+ */
+int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image);
+
  #endif
test/image/spl_load_os.c +1 -52
index 7d5fb9b07e0..56105a59236 100644
@@ -10,63 +10,12 @@
  #include <test/spl.h>
  #include <test/ut.h>
 
-/* Context used for this test */
-struct text_ctx {
-	int fd;
-};
-
-static ulong read_fit_image(struct spl_load_info *load, ulong offset,
-			    ulong size, void *buf)
-{
-	struct text_ctx *text_ctx = load->priv;
-	off_t ret;
-	ssize_t res;
-
-	ret = os_lseek(text_ctx->fd, offset, OS_SEEK_SET);
-	if (ret != offset) {
-		printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
-		       ret, errno);
-		return 0;
-	}
-
-	res = os_read(text_ctx->fd, buf, size);
-	if (res == -1) {
-		printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
-		       size, res, errno);
-		return 0;
-	}
-
-	return size;
-}
-
  static int spl_test_load(struct unit_test_state *uts)
  {
  	struct spl_image_info image;
-	struct legacy_img_hdr *header;
-	struct text_ctx text_ctx;
-	struct spl_load_info load;
  	char fname[256];
-	int ret;
-	int fd;
-
-	memset(&load, '\0', sizeof(load));
-	spl_set_bl_len(&load, 512);
-	load.read = read_fit_image;
-
-	ret = sandbox_find_next_phase(fname, sizeof(fname), true);
-	if (ret)
-		ut_assertf(0, "%s not found, error %d\n", fname, ret);
-
-	header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
-
-	fd = os_open(fname, OS_O_RDONLY);
-	ut_assert(fd >= 0);
-	ut_asserteq(512, os_read(fd, header, 512));
-	text_ctx.fd = fd;
-
-	load.priv = &text_ctx;
 
-	ut_assertok(spl_load_simple_fit(&image, &load, 0, header));
+	ut_assertok(sandbox_spl_load_fit(fname, sizeof(fname), &image));
 
  	return 0;
  }
#7 lore raw

PATCH v2 4/21 sandbox: Enable SPL_LOAD_BLOCK

In reply to Simon Glass

Enable this option for all sandbox boards so that the FIT-loading code can be used without generating an error about block devices not being supported.

---

(no changes since v1)

 common/spl/Kconfig | 1 +
 1 file changed, 1 insertion(+)
common/spl/Kconfig +1 -0
index af43b5f5d3c..970a4a346e4 100644
@@ -288,6 +288,7 @@ config SPL_BOARD_INIT
 
 config SPL_LOAD_BLOCK
 	bool
+	default y if SANDBOX
 	help
 	  Support loading images from block devices. This adds a bl_len member
 	  to struct spl_load_info.
Signature · 1 line
2.34.1
#8 lore raw

Re: [PATCH v2 04/21] sandbox: Enable SPL_LOAD_BLOCK

Quoted 17 lines · Simon Glass

Enable this option for all sandbox boards so that the FIT-loading code can be used without generating an error about block devices not being supported.

---

(no changes since v1)

  common/spl/Kconfig | 1 +
  1 file changed, 1 insertion(+)
common/spl/Kconfig +0 -0
index af43b5f5d3c..970a4a346e4 100644

common/spl/Kconfig config SPL_BOARD_INIT · line 294

Quoted 7 lines
common/spl/Kconfig +1 -0
@@ -288,6 +288,7 @@ config SPL_BOARD_INIT
 
  config SPL_LOAD_BLOCK
  	bool
+	default y if SANDBOX
  	help
  	  Support loading images from block devices. This adds a bl_len member
  	  to struct spl_load_info.

NACK.

Enable one of the many configs which select this one instead.

--Sean

#9 lore raw

Re: [PATCH v2 04/21] sandbox: Enable SPL_LOAD_BLOCK

Quoted 27 lines · Sean Anderson
Quoted 17 lines · Simon Glass

Enable this option for all sandbox boards so that the FIT-loading code can be used without generating an error about block devices not being supported.

---

(no changes since v1)

  common/spl/Kconfig | 1 +

  1 file changed, 1 insertion(+)
common/spl/Kconfig +0 -0
index af43b5f5d3c..970a4a346e4 100644
@@ -288,6 +288,7 @@ config SPL_BOARD_INIT
Quoted 6 lines

  config SPL_LOAD_BLOCK
      bool
+    default y if SANDBOX
      help
        Support loading images from block devices. This adds a bl_len member to struct spl_load_info.

NACK.

Quoted 3 lines

Enable one of the many configs which select this one instead.

--Sean

OK, so I think you wanted to add this because of the previous patch/patch 20.

I think a better solution would be to just reduce the bl_len to 1, since unix I/O is byte-oriented anyway and we now have several tests for bl_len != 1.

--Sean

#10 lore raw

PATCH v2 5/21 fdt: Don't overwrite bloblist devicetree

In reply to Simon Glass

When the devicetree comes from a bloblist, it is currently overwritten by the appended one, if present. It should be preserved.

Adjust the logic to support this.

Fixes 70fe2385943 ("fdt: Allow the devicetree to come from a bloblist")

---

(no changes since v1)

 lib/fdtdec.c | 1 +
 1 file changed, 1 insertion(+)
lib/fdtdec.c +1 -0
index b2c59ab3818..4861da1fab1 100644
@@ -1678,6 +1678,7 @@ int fdtdec_setup(void)
 				gd->fdt_src = FDTSRC_BLOBLIST;
 				log_debug("Devicetree is in bloblist at %p\n",
 					  gd->fdt_blob);
+				ret = 0;
 			} else {
 				log_debug("No FDT found in bloblist\n");
 				ret = -ENOENT;
Signature · 1 line
2.34.1
#11 lore raw

PATCH v2 6/21 sandbox: fdt: Avoid overwriting an existing fdt

In reply to Simon Glass

Since the removal of OF_HOSTFILE logic in board_fdt_blob_setup(), the logic for obtaining the DT is handed in the OF_BOARD option. If a devicetree comes from a bloblist it is immediately overwritten by this function.

Fix this by skipping the function if a devicetree is already present.

This is sort-of a fix for e7fb7896 ("sandbox: Remove OF_HOSTFILE") but it has only come to light since bloblist was added, so I have not added a Fixes tag.

Unfortunately it is not possible to report the correct FDT source with the current code. It might be best to use an error-return code for board_fdt_blob_setup() so that an error can be reported if the board does not provide the DT.

---

(no changes since v1)

 arch/sandbox/cpu/cpu.c | 2 ++
 1 file changed, 2 insertions(+)
arch/sandbox/cpu/cpu.c +2 -0
index 0ed85b354cf..4f15a560902 100644
@@ -340,6 +340,8 @@ void *board_fdt_blob_setup(int *ret)
 	int err;
 	int fd;
 
+	if (gd->fdt_blob)
+		return (void *)gd->fdt_blob;
 	blob = map_sysmem(CONFIG_SYS_FDT_LOAD_ADDR, 0);
 	*ret = 0;
 	if (!state->fdt_fname) {
Signature · 1 line
2.34.1
#12 lore raw

PATCH v2 7/21 sandbox: Return error code from read/write/seek

In reply to Simon Glass

The existing API for these functions is different from the rest of U-Boot, in that any error code must be obtained from the errno variable on failure. This variable is part of the C library, so accessing it outside of the special 'sandbox' shim-functions is not ideal.

Adjust the API to return an error code, to avoid this. Update existing uses to check for any negative value, rather than just -1.

---

(no changes since v1)

 arch/sandbox/cpu/os.c            | 24 +++++++++++++++++++++---
 arch/sandbox/cpu/spl.c           |  8 ++++----
 drivers/block/sandbox.c          |  4 ++--
 drivers/usb/emul/sandbox_flash.c |  2 +-
 fs/sandbox/sandboxfs.c           |  6 +++---
 include/os.h                     |  6 +++---
 6 files changed, 34 insertions(+), 16 deletions(-)
arch/sandbox/cpu/os.c +21 -3
index 1491d00504d..572947baf5c 100644
@@ -47,12 +47,24 @@ struct os_mem_hdr {
 
 ssize_t os_read(int fd, void *buf, size_t count)
 {
-	return read(fd, buf, count);
+	ssize_t ret;
+
+	ret = read(fd, buf, count);
+	if (ret == -1)
+		return -errno;
+
+	return ret;
 }
 
 ssize_t os_write(int fd, const void *buf, size_t count)
 {
-	return write(fd, buf, count);
+	ssize_t ret;
+
+	ret = write(fd, buf, count);
+	if (ret == -1)
+		return -errno;
+
+	return ret;
 }
 
 int os_printf(const char *fmt, ...)
@@ -69,6 +81,8 @@ int os_printf(const char *fmt, ...)
 
 off_t os_lseek(int fd, off_t offset, int whence)
 {
+	off_t ret;
+
 	if (whence == OS_SEEK_SET)
 		whence = SEEK_SET;
 	else if (whence == OS_SEEK_CUR)
@@ -77,7 +91,11 @@ off_t os_lseek(int fd, off_t offset, int whence)
 		whence = SEEK_END;
 	else
 		os_exit(1);
-	return lseek(fd, offset, whence);
+	ret = lseek(fd, offset, whence);
+	if (ret == -1)
+		return -errno;
+
+	return ret;
 }
 
 int os_open(const char *pathname, int os_flags)
arch/sandbox/cpu/spl.c +4 -4
index caa8e0b3b01..39869f27a7b 100644
@@ -195,15 +195,15 @@ static ulong read_fit_image(struct spl_load_info *load, ulong offset,
 
 	ret = os_lseek(load_ctx->fd, offset, OS_SEEK_SET);
 	if (ret < 0) {
-		printf("Failed to seek to %zx, got %zx (errno=%d)\n", offset,
-		       ret, errno);
+		printf("Failed to seek to %zx, got %zx (errno=%zd)\n", offset,
+		       ret, ret);
 		return log_msg_ret("lse", ret);
 	}
 
 	res = os_read(load_ctx->fd, buf, size);
 	if (res < 0) {
-		printf("Failed to read %lx bytes, got %ld (errno=%d)\n",
-		       size, res, errno);
+		printf("Failed to read %lx bytes, got %ld (errno=%zd)\n",
+		       size, res, ret);
 		return log_msg_ret("osr", res);
 	}
 
drivers/block/sandbox.c +2 -2
index ec34f1ad8c2..6c74d66037e 100644
@@ -25,7 +25,7 @@ static unsigned long host_block_read(struct udevice *dev,
 	struct udevice *host_dev = dev_get_parent(dev);
 	struct host_sb_plat *plat = dev_get_plat(host_dev);
 
-	if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) == -1) {
+	if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) < 0) {
 		printf("ERROR: Invalid block %lx\n", start);
 		return -1;
 	}
@@ -44,7 +44,7 @@ static unsigned long host_block_write(struct udevice *dev,
 	struct udevice *host_dev = dev_get_parent(dev);
 	struct host_sb_plat *plat = dev_get_plat(host_dev);
 
-	if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) == -1) {
+	if (os_lseek(plat->fd, start * desc->blksz, OS_SEEK_SET) < 0) {
 		printf("ERROR: Invalid block %lx\n", start);
 		return -1;
 	}
drivers/usb/emul/sandbox_flash.c +1 -1
index 24420e3d51e..b5176bb30ce 100644
@@ -196,7 +196,7 @@ static int handle_ufi_command(struct sandbox_flash_priv *priv, const void *buff,
 		   priv->fd != -1) {
 		offset = os_lseek(priv->fd, info->seek_block * info->block_size,
 				  OS_SEEK_SET);
-		if (offset == (off_t)-1)
+		if (offset < 0)
 			setup_fail_response(priv);
 		else
 			setup_response(priv);
fs/sandbox/sandboxfs.c +3 -3
index 773b583fa43..76f1a71f412 100644
@@ -28,7 +28,7 @@ int sandbox_fs_read_at(const char *filename, loff_t pos, void *buffer,
 	if (fd < 0)
 		return fd;
 	ret = os_lseek(fd, pos, OS_SEEK_SET);
-	if (ret == -1) {
+	if (ret < 0) {
 		os_close(fd);
 		return ret;
 	}
@@ -65,14 +65,14 @@ int sandbox_fs_write_at(const char *filename, loff_t pos, void *buffer,
 	if (fd < 0)
 		return fd;
 	ret = os_lseek(fd, pos, OS_SEEK_SET);
-	if (ret == -1) {
+	if (ret < 0) {
 		os_close(fd);
 		return ret;
 	}
 	size = os_write(fd, buffer, towrite);
 	os_close(fd);
 
-	if (size == -1) {
+	if (size < 0) {
 		ret = -1;
 	} else {
 		ret = 0;
include/os.h +3 -3
index 877404a6c13..4371270a1ee 100644
@@ -29,7 +29,7 @@ int os_printf(const char *format, ...);
  * @fd:		File descriptor as returned by os_open()
  * @buf:	Buffer to place data
  * @count:	Number of bytes to read
- * Return:	number of bytes read, or -1 on error
+ * Return:	number of bytes read, or -errno on error
  */
 ssize_t os_read(int fd, void *buf, size_t count);
 
@@ -39,7 +39,7 @@ ssize_t os_read(int fd, void *buf, size_t count);
  * @fd:		File descriptor as returned by os_open()
  * @buf:	Buffer containing data to write
  * @count:	Number of bytes to write
- * Return:	number of bytes written, or -1 on error
+ * Return:	number of bytes written, or -errno on error
  */
 ssize_t os_write(int fd, const void *buf, size_t count);
 
@@ -49,7 +49,7 @@ ssize_t os_write(int fd, const void *buf, size_t count);
  * @fd:		File descriptor as returned by os_open()
  * @offset:	File offset (based on whence)
  * @whence:	Position offset is relative to (see below)
- * Return:	new file offset
+ * Return:	new file offset, or -errno on error
  */
 off_t os_lseek(int fd, off_t offset, int whence);
 
Signature · 1 line
2.34.1
#13 lore raw

PATCH v2 8/21 sandbox: Add ELF file to VPL u-boot.img

In reply to Simon Glass

At present sandbox builds package up u-boot.bin in the .img file. This cannot actually be executed, since it is not an ELF file.

For sandbox_vpl we want to be able to run the full boot flow.

Adjust the build rule for sandbox_vpl to package the ELF file and thereby allow full testing of the sandbox transition from SPL to U-Boot proper.

---

(no changes since v1)

 Makefile | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Makefile +3 -1
index f5b2512f369..f364cd31ade 100644
@@ -1470,8 +1470,10 @@ u-boot.bin.lzma: u-boot.bin FORCE
 u-boot-lzma.img: u-boot.bin.lzma FORCE
 	$(call if_changed,mkimage)
 
+fit_image := $(if $(CONFIG_SANDBOX_VPL),u-boot,u-boot-nodtb.bin)
+
 u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
-		$(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin \
+		$(if $(CONFIG_SPL_LOAD_FIT),$(fit_image) \
 			$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
 		,$(UBOOT_BIN)) FORCE
 	$(call if_changed,mkimage)
Signature · 1 line
2.34.1
#14 lore raw

PATCH v2 9/21 sandbox: Set up global_data earlier

In reply to Simon Glass

It is possible for U-Boot functions such as printf() to be called within state_init(). This can end up checking gd->flags (e.g. in putc()) before global_data is set up.

Move the setup earlier to avoid this. This fixes the suppression of some debug output in memory allocation (when enabled).

---

(no changes since v1)

 arch/sandbox/cpu/start.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/sandbox/cpu/start.c +3 -2
index dce80416529..0920ed55965 100644
@@ -483,6 +483,9 @@ int sandbox_main(int argc, char *argv[])
 
 	text_base = os_find_text_base();
 
+	memset(&data, '\0', sizeof(data));
+	gd = &data;
+
 	/*
 	 * This must be the first invocation of os_malloc() to have
 	 * state->ram_buf in the low 4 GiB.
@@ -501,8 +504,6 @@ int sandbox_main(int argc, char *argv[])
 		os_exit(1);
 	memcpy(os_argv, argv, size);
 
-	memset(&data, '\0', sizeof(data));
-	gd = &data;
 	gd->arch.text_base = text_base;
 
 	state = state_get_current();
Signature · 1 line
2.34.1
#15 lore raw

PATCH v2 10/21 upl: Add support for reading a upl handoff

In reply to Simon Glass

Universal Payload provides a standard way of handing off control between two firmware phases. Add support for reading the handoff information into a structure.

---

(no changes since v1)

 MAINTAINERS               |   7 +
 boot/Kconfig              |  19 ++
 boot/Makefile             |   3 +
 boot/upl_common.c         |  60 ++++
 boot/upl_common.h         |  24 ++
 boot/upl_read.c           | 588 ++++++++++++++++++++++++++++++++++++++
 configs/sandbox_defconfig |   1 +
 include/upl.h             | 352 +++++++++++++++++++++++
 8 files changed, 1054 insertions(+)
 create mode 100644 boot/upl_common.c
 create mode 100644 boot/upl_common.h
 create mode 100644 boot/upl_read.c
 create mode 100644 include/upl.h
MAINTAINERS +7 -0
index 2c6de3a1d84..23852fbde38 100644
@@ -1694,6 +1694,13 @@ M:	Neha Malcom Francis <[email protected]>
 S:	Maintained
 F:	drivers/ufs/
 
+UPL
+M:	Simon Glass <[email protected]>
+S:	Maintained
+T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
+F:	boot/upl*
+F:	include/upl.h
+
 USB
 M:	Marek Vasut <[email protected]>
 S:	Maintained
boot/Kconfig +19 -0
index ffcae840a50..f371772acb9 100644
@@ -719,6 +719,25 @@ config BOOTMETH_SCRIPT
 	  This provides a way to try out standard boot on an existing boot flow.
 	  It is not enabled by default to save space.
 
+config UPL
+	bool "upl - Universal Payload Specification"
+	imply UPL_READ
+	help
+	  Provides support for UPL payloads and handoff information. U-Boot
+	  supports generating and accepting handoff information. The mkimage
+	  tool will eventually support creating payloads.
+
+if UPL
+
+config UPL_READ
+	bool "upl - Support reading a Universal Payload handoff"
+	help
+	  Provides support for decoding a UPL-format payload into a C structure
+	  which can be used elsewhere in U-Boot. This is just the reading
+	  implementation, useful for trying it out.
+
+endif  # UPL
+
 endif # BOOTSTD
 
 config LEGACY_IMAGE_FORMAT
boot/Makefile +3 -0
index 84ccfeaecec..c4720d93ca3 100644
@@ -43,6 +43,9 @@ endif
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
 obj-$(CONFIG_$(SPL_TPL_)FDT_SIMPLEFB) += fdt_simplefb.o
 
+obj-$(CONFIG_$(SPL_TPL_)UPL) += upl_common.o
+obj-$(CONFIG_$(SPL_TPL_)UPL_READ) += upl_read.o
+
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
 obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o
 obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
boot/upl_common.c new file +60 -0

60 lines not on this page · raw message

boot/upl_common.h new file +24 -0
new file mode 100644
index 00000000000..cc517dc1de9
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UPL handoff command functions
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#ifndef __UPL_COMMON_H
+#define __UPL_COMMON_H
+
+/* Names of bootmodes */
+extern const char *const bootmode_names[UPLBM_COUNT];
+
+/* Names of memory usages */
+extern const char *const usage_names[UPLUS_COUNT];
+
+/* Names of access types */
+extern const char *const access_types[UPLUS_COUNT];
+
+/* Names of graphics formats */
+extern const char *const graphics_formats[UPLUS_COUNT];
+
+#endif /* __UPL_COMMON_H */
boot/upl_read.c new file +588 -0

588 lines not on this page · raw message

configs/sandbox_defconfig +1 -0
index da8c1976d7b..b5d1b69da2a 100644
@@ -15,6 +15,7 @@ CONFIG_FIT=y
 CONFIG_FIT_RSASSA_PSS=y
 CONFIG_FIT_CIPHER=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_UPL=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_MEASURED_BOOT=y
 CONFIG_BOOTSTAGE=y
include/upl.h new file +352 -0

352 lines not on this page · raw message

Signature · 1 line
2.34.1
#16 lore raw

Re: [PATCH v2 10/21] upl: Add support for reading a upl handoff

Quoted 365 lines · Simon Glass

Universal Payload provides a standard way of handing off control between two firmware phases. Add support for reading the handoff information into a structure.

---

(no changes since v1)

  MAINTAINERS               |   7 +
  boot/Kconfig              |  19 ++
  boot/Makefile             |   3 +
  boot/upl_common.c         |  60 ++++
  boot/upl_common.h         |  24 ++
  boot/upl_read.c           | 588 ++++++++++++++++++++++++++++++++++++++
  configs/sandbox_defconfig |   1 +
  include/upl.h             | 352 +++++++++++++++++++++++
  8 files changed, 1054 insertions(+)

create mode 100644 boot/upl_common.c
create mode 100644 boot/upl_common.h
create mode 100644 boot/upl_read.c
create mode 100644 include/upl.h

MAINTAINERS +7 -0
index 2c6de3a1d84..23852fbde38 100644
@@ -1694,6 +1694,13 @@ M:	Neha Malcom Francis <[email protected]>
  S:	Maintained
  F:	drivers/ufs/
 
+UPL
+M:	Simon Glass <[email protected]>
+S:	Maintained
+T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
+F:	boot/upl*
+F:	include/upl.h
+
  USB
  M:	Marek Vasut <[email protected]>
  S:	Maintained
boot/Kconfig +19 -0
index ffcae840a50..f371772acb9 100644
@@ -719,6 +719,25 @@ config BOOTMETH_SCRIPT
  	  This provides a way to try out standard boot on an existing boot flow.
  	  It is not enabled by default to save space.
 
+config UPL
+	bool "upl - Universal Payload Specification"
+	imply UPL_READ
+	help
+	  Provides support for UPL payloads and handoff information. U-Boot
+	  supports generating and accepting handoff information. The mkimage
+	  tool will eventually support creating payloads.
+
+if UPL
+
+config UPL_READ
+	bool "upl - Support reading a Universal Payload handoff"
+	help
+	  Provides support for decoding a UPL-format payload into a C structure
+	  which can be used elsewhere in U-Boot. This is just the reading
+	  implementation, useful for trying it out.
+
+endif  # UPL
+
  endif # BOOTSTD
 
  config LEGACY_IMAGE_FORMAT
boot/Makefile +3 -0
index 84ccfeaecec..c4720d93ca3 100644
@@ -43,6 +43,9 @@ endif
  obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
  obj-$(CONFIG_$(SPL_TPL_)FDT_SIMPLEFB) += fdt_simplefb.o
 
+obj-$(CONFIG_$(SPL_TPL_)UPL) += upl_common.o
+obj-$(CONFIG_$(SPL_TPL_)UPL_READ) += upl_read.o
+
  obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
  obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o
  obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
boot/upl_common.c new file +60 -0
new file mode 100644
index 00000000000..3924423abd5
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff command functions
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <string.h>
+#include <upl.h>
+
+/* Names of bootmodes */
+const char *const bootmode_names[UPLBM_COUNT] = {
+	[UPLBM_FULL]	= "full",
+	[UPLBM_MINIMAL]	= "minimal",
+	[UPLBM_FAST]	= "fast",
+	[UPLBM_DIAG]	= "diag",
+	[UPLBM_DEFAULT]	= "default",
+	[UPLBM_S2]	= "s2",
+	[UPLBM_S3]	= "s3",
+	[UPLBM_S4]	= "s4",
+	[UPLBM_S5]	= "s5",
+	[UPLBM_FACTORY]	= "factory",
+	[UPLBM_FLASH]	= "flash",
+	[UPLBM_RECOVERY] = "recovery",
+};
+
+/* Names of memory usages */
+const char *const usage_names[UPLUS_COUNT] = {
+	[UPLUS_ACPI_RECLAIM]	= "acpi-reclaim",
+	[UPLUS_ACPI_NVS]	= "acpi-nvs",
+	[UPLUS_BOOT_CODE]	= "boot-code",
+	[UPLUS_BOOT_DATA]	= "boot-data",
+	[UPLUS_RUNTIME_CODE]	= "runtime-code",
+	[UPLUS_RUNTIME_DATA]	= "runtime-data",
+};
+
+/* Names of access types */
+const char *const access_types[UPLUS_COUNT] = {
+	[UPLAT_MMIO]	= "mmio",
+	[UPLAT_IO]	= "io",
+};
+
+/* Names of graphics formats */
+const char *const graphics_formats[UPLUS_COUNT] = {
+	[UPLGF_ARGB32]	= "a8r8g8b8",
+	[UPLGF_ABGR32]	= "a8b8g8r8",
+	[UPLGF_ABGR64]	= "a16b16g16r16",
+};
+
+void upl_init(struct upl *upl)
+{
+	memset(upl, '\0', sizeof(struct upl));
+	alist_init_struct(&upl->image, struct upl_image);
+	alist_init_struct(&upl->mem, struct upl_mem);
+	alist_init_struct(&upl->memmap, struct upl_memmap);
+	alist_init_struct(&upl->memres, struct upl_memres);
+}
boot/upl_common.h new file +24 -0
new file mode 100644
index 00000000000..cc517dc1de9
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UPL handoff command functions
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#ifndef __UPL_COMMON_H
+#define __UPL_COMMON_H
+
+/* Names of bootmodes */
+extern const char *const bootmode_names[UPLBM_COUNT];
+
+/* Names of memory usages */
+extern const char *const usage_names[UPLUS_COUNT];
+
+/* Names of access types */
+extern const char *const access_types[UPLUS_COUNT];
+
+/* Names of graphics formats */
+extern const char *const graphics_formats[UPLUS_COUNT];
+
+#endif /* __UPL_COMMON_H */
boot/upl_read.c new file +178 -0
new file mode 100644
index 00000000000..2d8caa6ef11
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UPL handoff parsing
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#define LOG_CATEGORY UCLASS_BOOTSTD
+
+#include <log.h>
+#include <upl.h>
+#include <dm/ofnode.h>
+#include "upl_common.h"
+
+/**
+ * read_addr() - Read an address
+ *
+ * Reads an address in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @addr: Place to put the address
+ * Return: 0 if OK, -ve on error
+ */
+static int read_addr(const struct upl *upl, ofnode node, const char *prop,
+		     ulong *addrp)
+{
+	int ret;
+
+	if (upl->addr_cells == 1) {
+		u32 val;
+
+		ret = ofnode_read_u32(node, prop, &val);
+		if (!ret)
+			*addrp = val;
+	} else {
+		u64 val;
+
+		ret = ofnode_read_u64(node, prop, &val);
+		if (!ret)
+			*addrp = val;
+	}
+
+	return ret;
+}
+
+/**
+ * read_size() - Read a size
+ *
+ * Reads a size in the correct format, either 32- or 64-bit
+ *
+ * @upl: UPL state
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @addr: Place to put the size
+ * Return: 0 if OK, -ve on error
+ */
+static int read_size(const struct upl *upl, ofnode node, const char *prop,
+		     ulong *sizep)
+{
+	int ret;
+
+	if (upl->size_cells == 1) {
+		u32 val;
+
+		ret = ofnode_read_u32(node, prop, &val);
+		if (!ret)
+			*sizep = val;
+	} else {
+		u64 val;
+
+		ret = ofnode_read_u64(node, prop, &val);
+		if (!ret)
+			*sizep = val;
+	}
+
+	return ret;
+}
+
+/**
+ * ofnode_read_bitmask() - Read a bit mask from a string list
+ *
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @names: Array of names for each bit
+ * @count: Number of array entries
+ * @value: Returns resulting bit-mask value on success
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOSPC if the
+ * string is too long for the (internal) buffer, -EINVAL if no such property
+ */
+static int ofnode_read_bitmask(ofnode node, const char *prop,
+			       const char *const names[], uint count,
+			       uint *valuep)
+{
+	const char **list;
+	const char **strp;
+	uint val;
+	uint bit;
+	int ret;
+
+	ret = ofnode_read_string_list(node, prop, &list);
+	if (ret < 0)
+		return log_msg_ret("rea", ret);
+
+	val = 0;
+	for (strp = list; *strp; strp++) {
+		const char *str = *strp;
+		bool found = false;
+
+		for (bit = 0; bit < count; bit++) {
+			if (!strcmp(str, names[bit])) {
+				found = true;
+				break;
+			}
+		}
+		if (found)
+			val |= BIT(bit);
+		else
+			log_warning("%s/%s: Invalid value '%s'\n",
+				    ofnode_get_name(node), prop, str);
+	}
+	*valuep = val;
+
+	return 0;
+}
+
+/**
+ * ofnode_read_value() - Read a string value as an int using a lookup
+ *
+ * @node: Node to read from
+ * @prop: Property name to read
+ * @names: Array of names for each int value
+ * @count: Number of array entries
+ * @valuep: Returns int value read
+ * Return: 0 if OK, -EINVAL if a bit number is not defined, -ENOENT if the
+ * property does not exist
+ */
+static int ofnode_read_value(ofnode node, const char *prop,
+			     const char *const names[], uint count,
+			     uint *valuep)
+{
+	const char *str;
+	int i;
+
+	str = ofnode_read_string(node, prop);
+	if (!str)
+		return log_msg_ret("rd", -ENOENT);
+
+	for (i = 0; i < count; i++) {
+		if (!strcmp(names[i], str)) {
+			*valuep = i;
+			return 0;
+		}
+	}
+
+	log_debug("Unnamed value '%s'\n", str);
+	return log_msg_ret("val", -EINVAL);
+}
+
+static int read_uint(ofnode node, const char *prop, uint *valp)
+{
+	u32 val;
+	int ret;
+
+	ret = ofnode_read_u32(node, prop, &val);
+	if (ret)
+		return ret;
+	*valp = val;
+
+	return 0;
+}
+
+/**
+ * decode_root_props() - Decode root properties from the tree
+ *
+ * @upl: UPL state

boot/upl_read.c line 188

Quoted 10 lines
boot/upl_read.c new file +10 -0
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_root_props(struct upl *upl, ofnode node)
+{
+	int ret;
+
+	ret = read_uint(node, UPLP_ADDRESS_CELLS, &upl->addr_cells);
+	if (!ret)
+		ret = read_uint(node, UPLP_SIZE_CELLS, &upl->size_cells);

Why do we need a special handling of addr_cells and size_cells? The device-tree provided by UPL follows the device-tree specification which requires to set these properties in the parent of the node.

Best regards

Heinrich

Quoted 770 lines
boot/upl_read.c new file +400 -0
+	if (ret)
+		return log_msg_ret("cel", ret);
+
+	return 0;
+}
+
+/**
+ * decode_root_props() - Decode UPL parameters from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_params(struct upl *upl, ofnode options)
+{
+	ofnode node;
+	int ret;
+
+	node = ofnode_find_subnode(options, UPLN_UPL_PARAMS);
+	if (!ofnode_valid(node))
+		return log_msg_ret("par", -EINVAL);
+	log_debug("decoding '%s'\n", ofnode_get_name(node));
+
+	ret = read_addr(upl, node, UPLP_SMBIOS, &upl->smbios);
+	if (ret)
+		return log_msg_ret("smb", ret);
+	ret = read_addr(upl, node, UPLP_ACPI, &upl->acpi);
+	if (ret)
+		return log_msg_ret("acp", ret);
+	ret = ofnode_read_bitmask(node, UPLP_BOOTMODE, bootmode_names,
+				  UPLBM_COUNT, &upl->bootmode);
+	if (ret)
+		return log_msg_ret("boo", ret);
+	ret = read_uint(node, UPLP_ADDR_WIDTH, &upl->addr_width);
+	if (ret)
+		return log_msg_ret("add", ret);
+	ret = read_uint(node, UPLP_ACPI_NVS_SIZE, &upl->acpi_nvs_size);
+	if (ret)
+		return log_msg_ret("nvs", ret);
+
+	return 0;
+}
+
+/**
+ * decode_upl_images() - Decode /options/upl-image nodes
+ *
+ * @node: /options node in which to look for the node
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_images(struct upl *upl, ofnode options)
+{
+	ofnode node, images;
+	int ret;
+
+	images = ofnode_find_subnode(options, UPLN_UPL_IMAGE);
+	if (!ofnode_valid(images))
+		return log_msg_ret("img", -EINVAL);
+	log_debug("decoding '%s'\n", ofnode_get_name(images));
+
+	ret = read_addr(upl, images, UPLP_FIT, &upl->fit);
+	if (!ret)
+		ret = read_uint(images, UPLP_CONF_OFFSET, &upl->conf_offset);
+	if (ret)
+		return log_msg_ret("cnf", ret);
+
+	ofnode_for_each_subnode(node, images) {
+		struct upl_image img;
+
+		ret = read_addr(upl, node, UPLP_LOAD, &img.load);
+		if (!ret)
+			ret = read_size(upl, node, UPLP_SIZE, &img.size);
+		if (!ret)
+			ret = read_uint(node, UPLP_OFFSET, &img.offset);
+		img.description = ofnode_read_string(node, UPLP_DESCRIPTION);
+		if (!img.description)
+			return log_msg_ret("sim", ret);
+		if (!alist_add(&upl->image, img, struct upl_image))
+			return log_msg_ret("img", -ENOMEM);
+	}
+
+	return 0;
+}
+
+/**
+ * decode_addr_size() - Decide a set of addr/size pairs
+ *
+ * Each base/size value from the devicetree is written to the region list
+ *
+ * @upl: UPL state
+ * @buf: Bytes to decode
+ * @size: Number of bytes to decode
+ * @regions: List of regions to process (struct memregion)
+ * Returns: number of regions found, if OK, else -ve on error
+ */
+static int decode_addr_size(const struct upl *upl, const char *buf, int size,
+			    struct alist *regions)
+{
+	const char *ptr, *end = buf + size;
+	int i;
+
+	alist_init_struct(regions, struct memregion);
+	ptr = buf;
+	for (i = 0; ptr < end; i++) {
+		struct memregion reg;
+
+		if (upl->addr_cells == 1)
+			reg.base = fdt32_to_cpu(*(u32 *)ptr);
+		else
+			reg.base = fdt64_to_cpu(*(u64 *)ptr);
+		ptr += upl->addr_cells * sizeof(u32);
+
+		if (upl->size_cells == 1)
+			reg.size = fdt32_to_cpu(*(u32 *)ptr);
+		else
+			reg.size = fdt64_to_cpu(*(u64 *)ptr);
+		ptr += upl->size_cells * sizeof(u32);
+		if (ptr > end)
+			return -ENOSPC;
+
+		if (!alist_add(regions, reg, struct memregion))
+			return log_msg_ret("reg", -ENOMEM);
+	}
+
+	return i;
+}
+
+/**
+ * node_matches_at() - Check if a node name matches "base@..."
+ *
+ * Return: true if the node name matches the base string followed by an @ sign;
+ * false otherwise
+ */
+static bool node_matches_at(ofnode node, const char *base)
+{
+	const char *name = ofnode_get_name(node);
+	int len = strlen(base);
+
+	return !strncmp(base, name, len) && name[len] == '@';
+}
+
+/**
+ * decode_upl_memory_node() - Decode a /memory node from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memory_node(struct upl *upl, ofnode node)
+{
+	struct upl_mem mem;
+	const char *buf;
+	int size, len;
+
+	buf = ofnode_read_prop(node, UPLP_REG, &size);
+	if (!buf) {
+		log_warning("Node '%s': Missing '%s' property\n",
+			    ofnode_get_name(node), UPLP_REG);
+		return log_msg_ret("reg", -EINVAL);
+	}
+	len = decode_addr_size(upl, buf, size, &mem.region);
+	if (len < 0)
+		return log_msg_ret("buf", len);
+	mem.hotpluggable = ofnode_read_bool(node, UPLP_HOTPLUGGABLE);
+	if (!alist_add(&upl->mem, mem, struct upl_mem))
+		return log_msg_ret("mem", -ENOMEM);
+
+	return 0;
+}
+
+/**
+ * decode_upl_memmap() - Decode memory-map nodes from the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node containing the /memory-map nodes
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memmap(struct upl *upl, ofnode root)
+{
+	ofnode node;
+
+	ofnode_for_each_subnode(node, root) {
+		struct upl_memmap memmap;
+		int size, len, ret;
+		const char *buf;
+
+		memmap.name = ofnode_get_name(node);
+		memmap.usage = 0;
+
+		buf = ofnode_read_prop(node, UPLP_REG, &size);
+		if (!buf) {
+			log_warning("Node '%s': Missing '%s' property\n",
+				    ofnode_get_name(node), UPLP_REG);
+			continue;
+		}
+
+		len = decode_addr_size(upl, buf, size, &memmap.region);
+		if (len < 0)
+			return log_msg_ret("buf", len);
+		ret = ofnode_read_bitmask(node, UPLP_USAGE, usage_names,
+					  UPLUS_COUNT, &memmap.usage);
+		if (ret && ret != -EINVAL)	/* optional property */
+			return log_msg_ret("bit", ret);
+
+		if (!alist_add(&upl->memmap, memmap, struct upl_memmap))
+			return log_msg_ret("mmp", -ENOMEM);
+	}
+
+	return 0;
+}
+
+/**
+ * decode_upl_memres() - Decode reserved-memory nodes from the tree
+ *
+ * @upl: UPL state
+ * @root: Parent node containing the reserved-memory nodes
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_memres(struct upl *upl, ofnode root)
+{
+	ofnode node;
+
+	ofnode_for_each_subnode(node, root) {
+		struct upl_memres memres;
+		const char *buf;
+		int size, len;
+
+		log_debug("decoding '%s'\n", ofnode_get_name(node));
+		memres.name = ofnode_get_name(node);
+
+		buf = ofnode_read_prop(node, UPLP_REG, &size);
+		if (!buf) {
+			log_warning("Node '%s': Missing 'reg' property\n",
+				    ofnode_get_name(node));
+			continue;
+		}
+
+		len = decode_addr_size(upl, buf, size, &memres.region);
+		if (len < 0)
+			return log_msg_ret("buf", len);
+		memres.no_map = ofnode_read_bool(node, UPLP_NO_MAP);
+
+		if (!alist_add(&upl->memres, memres, struct upl_memres))
+			return log_msg_ret("mre", -ENOMEM);
+	}
+
+	return 0;
+}
+
+/**
+ * decode_upl_serial() - Decode the serial node
+ *
+ * @upl: UPL state
+ * @root: Parent node contain node
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_serial(struct upl *upl, ofnode node)
+{
+	struct upl_serial *ser = &upl->serial;
+	const char *buf;
+	int len, size;
+	int ret;
+
+	ser->compatible = ofnode_read_string(node, UPLP_COMPATIBLE);
+	if (!ser->compatible) {
+		log_warning("Node '%s': Missing compatible string\n",
+			    ofnode_get_name(node));
+		return log_msg_ret("com", -EINVAL);
+	}
+	ret = read_uint(node, UPLP_CLOCK_FREQUENCY, &ser->clock_frequency);
+	if (!ret)
+		ret = read_uint(node, UPLP_CURRENT_SPEED, &ser->current_speed);
+	if (ret)
+		return log_msg_ret("spe", ret);
+
+	buf = ofnode_read_prop(node, UPLP_REG, &size);
+	if (!buf) {
+		log_warning("Node '%s': Missing 'reg' property\n",
+			    ofnode_get_name(node));
+		return log_msg_ret("reg", -EINVAL);
+	}
+
+	len = decode_addr_size(upl, buf, sizeof(buf), &ser->reg);
+	if (len < 0)
+		return log_msg_ret("buf", len);
+
+	/* set defaults */
+	ser->reg_io_shift = UPLD_REG_IO_SHIFT;
+	ser->reg_offset = UPLD_REG_OFFSET;
+	ser->reg_io_width = UPLD_REG_IO_WIDTH;
+	read_uint(node, UPLP_REG_IO_SHIFT, &ser->reg_io_shift);
+	read_uint(node, UPLP_REG_OFFSET, &ser->reg_offset);
+	read_uint(node, UPLP_REG_IO_WIDTH, &ser->reg_io_width);
+	read_addr(upl, node, UPLP_VIRTUAL_REG, &ser->virtual_reg);
+	ret = ofnode_read_value(node, UPLP_ACCESS_TYPE, access_types,
+				ARRAY_SIZE(access_types), &ser->access_type);
+	if (ret && ret != -ENOENT)
+		return log_msg_ret("ser", ret);
+
+	return 0;
+}
+
+/**
+ * decode_upl_graphics() - Decode graphics node
+ *
+ * @upl: UPL state
+ * @root: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_upl_graphics(struct upl *upl, ofnode node)
+{
+	struct upl_graphics *gra = &upl->graphics;
+	const char *buf, *compat;
+	int len, size;
+	int ret;
+
+	compat = ofnode_read_string(node, UPLP_COMPATIBLE);
+	if (!compat) {
+		log_warning("Node '%s': Missing compatible string\n",
+			    ofnode_get_name(node));
+		return log_msg_ret("com", -EINVAL);
+	}
+	if (strcmp(UPLC_GRAPHICS, compat)) {
+		log_warning("Node '%s': Ignoring compatible '%s'\n",
+			    ofnode_get_name(node), compat);
+		return 0;
+	}
+
+	buf = ofnode_read_prop(node, UPLP_REG, &size);
+	if (!buf) {
+		log_warning("Node '%s': Missing 'reg' property\n",
+			    ofnode_get_name(node));
+		return log_msg_ret("reg", -EINVAL);
+	}
+
+	len = decode_addr_size(upl, buf, sizeof(buf), &gra->reg);
+	if (len < 0)
+		return log_msg_ret("buf", len);
+
+	ret = read_uint(node, UPLP_WIDTH, &gra->width);
+	if (!ret)
+		ret = read_uint(node, UPLP_HEIGHT, &gra->height);
+	if (!ret)
+		ret = read_uint(node, UPLP_STRIDE, &gra->stride);
+	if (!ret) {
+		ret = ofnode_read_value(node, UPLP_GRAPHICS_FORMAT,
+					graphics_formats,
+					ARRAY_SIZE(graphics_formats),
+					&gra->format);
+	}
+	if (ret)
+		return log_msg_ret("pro", ret);
+
+	return 0;
+}
+
+int upl_read_handoff(struct upl *upl, oftree tree)
+{
+	ofnode root, node;
+	int ret;
+
+	if (!oftree_valid(tree))
+		return log_msg_ret("tre", -EINVAL);
+
+	root = oftree_root(tree);
+
+	upl_init(upl);
+	ret = decode_root_props(upl, root);
+	if (ret)
+		return log_msg_ret("roo", ret);
+
+	ofnode_for_each_subnode(node, root) {
+		const char *name = ofnode_get_name(node);
+
+		log_debug("decoding '%s'\n", name);
+		if (!strcmp(UPLN_OPTIONS, name)) {
+			ret = decode_upl_params(upl, node);
+			if (ret)
+				return log_msg_ret("opt", ret);
+
+			ret = decode_upl_images(upl, node);
+		} else if (node_matches_at(node, UPLN_MEMORY)) {
+			ret = decode_upl_memory_node(upl, node);
+		} else if (!strcmp(UPLN_MEMORY_MAP, name)) {
+			ret = decode_upl_memmap(upl, node);
+		} else if (!strcmp(UPLN_MEMORY_RESERVED, name)) {
+			ret = decode_upl_memres(upl, node);
+		} else if (node_matches_at(node, UPLN_SERIAL)) {
+			ret = decode_upl_serial(upl, node);
+		} else if (node_matches_at(node, UPLN_GRAPHICS)) {
+			ret = decode_upl_graphics(upl, node);
+		} else {
+			log_debug("Unknown node '%s'\n", name);
+			ret = 0;
+		}
+		if (ret)
+			return log_msg_ret("err", ret);
+	}
+
+	return 0;
+}
configs/sandbox_defconfig +1 -0
index da8c1976d7b..b5d1b69da2a 100644
@@ -15,6 +15,7 @@ CONFIG_FIT=y
  CONFIG_FIT_RSASSA_PSS=y
  CONFIG_FIT_CIPHER=y
  CONFIG_FIT_VERBOSE=y
+CONFIG_UPL=y
  CONFIG_LEGACY_IMAGE_FORMAT=y
  CONFIG_MEASURED_BOOT=y
  CONFIG_BOOTSTAGE=y
include/upl.h new file +352 -0
new file mode 100644
index 00000000000..793d1e86dbb
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * UPL handoff generation
+ *
+ * Copyright 2024 Google LLC
+ * Written by Simon Glass <[email protected]>
+ */
+
+#ifndef __UPL_WRITE_H
+#define __UPL_WRITE_H
+
+#include <alist.h>
+#include <dm/ofnode_decl.h>
+
+struct unit_test_state;
+
+#define UPLP_ADDRESS_CELLS	"#address-cells"
+#define UPLP_SIZE_CELLS		"#size-cells"
+
+#define UPLN_OPTIONS		"options"
+#define UPLN_UPL_PARAMS		"upl-params"
+#define UPLP_SMBIOS		"smbios"
+#define UPLP_ACPI		"acpi"
+#define UPLP_BOOTMODE		"bootmode"
+#define UPLP_ADDR_WIDTH		"addr-width"
+#define UPLP_ACPI_NVS_SIZE	"acpi-nvs-size"
+
+#define UPLPATH_UPL_IMAGE	"/options/upl-image"
+#define UPLN_UPL_IMAGE		"upl-image"
+#define UPLN_IMAGE		"image"
+#define UPLP_FIT		"fit"
+#define UPLP_CONF_OFFSET	"conf-offset"
+#define UPLP_LOAD		"load"
+#define UPLP_SIZE		"size"
+#define UPLP_OFFSET		"offset"
+#define UPLP_DESCRIPTION	"description"
+
+#define UPLN_MEMORY		"memory"
+#define UPLP_HOTPLUGGABLE	"hotpluggable"
+
+#define UPLPATH_MEMORY_MAP	"/memory-map"
+#define UPLN_MEMORY_MAP		"memory-map"
+#define UPLP_USAGE		"usage"
+
+#define UPLN_MEMORY_RESERVED	"reserved-memory"
+#define UPLPATH_MEMORY_RESERVED	"/reserved-memory"
+#define UPLP_NO_MAP		"no-map"
+
+#define UPLN_SERIAL		"serial"
+#define UPLP_REG		"reg"
+#define UPLP_COMPATIBLE		"compatible"
+#define UPLP_CLOCK_FREQUENCY	"clock-frequency"
+#define UPLP_CURRENT_SPEED	"current-speed"
+#define UPLP_REG_IO_SHIFT	"reg-io-shift"
+#define UPLP_REG_OFFSET		"reg-offset"
+#define UPLP_REG_IO_WIDTH	"reg-io-width"
+#define UPLP_VIRTUAL_REG	"virtual-reg"
+#define UPLP_ACCESS_TYPE	"access-type"
+
+#define UPLN_GRAPHICS		"framebuffer"
+#define UPLC_GRAPHICS		"simple-framebuffer"
+#define UPLP_WIDTH		"width"
+#define UPLP_HEIGHT		"height"
+#define UPLP_STRIDE		"stride"
+#define UPLP_GRAPHICS_FORMAT	"format"
+
+/**
+ * enum upl_boot_mode - Encodes the boot mode
+ *
+ * Each is a bit number from the boot_mode mask
+ */
+enum upl_boot_mode {
+	UPLBM_FULL,
+	UPLBM_MINIMAL,
+	UPLBM_FAST,
+	UPLBM_DIAG,
+	UPLBM_DEFAULT,
+	UPLBM_S2,
+	UPLBM_S3,
+	UPLBM_S4,
+	UPLBM_S5,
+	UPLBM_FACTORY,
+	UPLBM_FLASH,
+	UPLBM_RECOVERY,
+
+	UPLBM_COUNT,
+};
+
+/**
+ * struct upl_image - UPL image informaiton
+ *
+ * @load: Address image was loaded to
+ * @size: Size of image in bytes
+ * @offset: Offset of the image in the FIT (0=none)
+ * @desc: Description of the iamge (taken from the FIT)
+ */
+struct upl_image {
+	ulong load;
+	ulong size;
+	uint offset;
+	const char *description;
+};
+
+/**
+ * struct memregion - Information about a region of memory
+ *
+ * @base: Base address
+ * @size: Size in bytes
+ */
+struct memregion {
+	ulong base;
+	ulong size;
+};
+
+/**
+ * struct upl_mem - Information about physical-memory layout
+ *
+ * TODO: Figure out initial-mapped-area
+ *
+ * @region: Memory region list (struct memregion)
+ * @hotpluggable: true if hotpluggable
+ */
+struct upl_mem {
+	struct alist region;
+	bool hotpluggable;
+};
+
+/**
+ * enum upl_usage - Encodes the usage
+ *
+ * Each is a bit number from the usage mask
+ */
+enum upl_usage {
+	UPLUS_ACPI_RECLAIM,
+	UPLUS_ACPI_NVS,
+	UPLUS_BOOT_CODE,
+	UPLUS_BOOT_DATA,
+	UPLUS_RUNTIME_CODE,
+	UPLUS_RUNTIME_DATA,
+	UPLUS_COUNT
+};
+
+/**
+ * struct upl_memmap - Information about logical-memory layout
+ *
+ * @name: Node name to use
+ * @region: Memory region list (struct memregion)
+ * @usage: Memory-usage mask (enum upl_usage)
+ */
+struct upl_memmap {
+	const char *name;
+	struct alist region;
+	uint usage;
+};
+
+/**
+ * struct upl_memres - Reserved memory
+ *
+ * @name: Node name to use
+ * @region: Reserved memory region list (struct memregion)
+ * @no_map: true to indicate that a virtual mapping must not be created
+ */
+struct upl_memres {
+	const char *name;
+	struct alist region;
+	bool no_map;
+};
+
+enum upl_serial_access_type {
+	UPLSAT_MMIO,
+	UPLSAT_IO,
+};
+
+/* serial defaults */
+enum {
+	UPLD_REG_IO_SHIFT	= 0,
+	UPLD_REG_OFFSET		= 0,
+	UPLD_REG_IO_WIDTH	= 1,
+};
+
+/**
+ * enum upl_access_type - Access types
+ *
+ * @UPLAT_MMIO: Memory-mapped I/O
+ * @UPLAT_IO: Separate I/O
+ */
+enum upl_access_type {
+	UPLAT_MMIO,
+	UPLAT_IO,
+};
+
+/**
+ * struct upl_serial - Serial console
+ *
+ * @compatible: Compatible string (NULL if there is no serial console)
+ * @clock_frequency: Input clock frequency of UART
+ * @current_speed: Current baud rate of UART
+ * @reg: List of base address and size of registers (struct memregion)
+ * @reg_shift_log2: log2 of distance between each register
+ * @reg_offset: Offset of registers from the base address
+ * @reg_width: Register width in bytes
+ * @virtual_reg: Virtual register access (0 for none)
+ * @access_type: Register access type to use
+ */
+struct upl_serial {
+	const char *compatible;
+	uint clock_frequency;
+	uint current_speed;
+	struct alist reg;
+	uint reg_io_shift;
+	uint reg_offset;
+	uint reg_io_width;
+	ulong virtual_reg;
+	enum upl_serial_access_type access_type;
+};
+
+/**
+ * enum upl_graphics_format - Graphics formats
+ *
+ * @UPLGF_ARGB32: 32bpp format using 0xaarrggbb
+ * @UPLGF_ABGR32: 32bpp format using 0xaabbggrr
+ * @UPLGF_ARGB64: 64bpp format using 0xaaaabbbbggggrrrr
+ */
+enum upl_graphics_format {
+	UPLGF_ARGB32,
+	UPLGF_ABGR32,
+	UPLGF_ABGR64,
+};
+
+/**
+ * @reg: List of base address and size of registers (struct memregion)
+ * @width: Width of display in pixels
+ * @height: Height of display in pixels
+ * @stride: Number of bytes from one line to the next
+ * @format: Pixel format
+ */
+struct upl_graphics {
+	struct alist reg;
+	uint width;
+	uint height;
+	uint stride;
+	enum upl_graphics_format format;
+};
+
+/*
+ * Information about the UPL state
+ *
+ * @addr_cells: Number of address cells used in the handoff
+ * @size_cells: Number of size cells used in the handoff
+ * @bootmode: Boot-mode mask (enum upl_boot_mode)
+ * @fit: Address of FIT image that was loaded
+ * @conf_offset: Offset in FIT of the configuration that was selected
+ * @addr_width: Adress-bus width of machine, e.g. 46 for 46 bits
+ * @acpi_nvs_size: Size of the ACPI non-volatile-storage area in bytes
+ * @image: Information about each image (struct upl_image)
+ * @mem: Information about physical-memory regions (struct upl_mem)
+ * @nennap: Information about logical-memory regions (struct upl_memmap)
+ * @nennap: Information about reserved-memory regions (struct upl_memres)
+ */
+struct upl {
+	int addr_cells;
+	int size_cells;
+
+	ulong smbios;
+	ulong acpi;
+	uint bootmode;
+	ulong fit;
+	uint conf_offset;
+	uint addr_width;
+	uint acpi_nvs_size;
+
+	struct alist image;
+	struct alist mem;
+	struct alist memmap;
+	struct alist memres;
+	struct upl_serial serial;
+	struct upl_graphics graphics;
+};
+
+/**
+ * upl_write_handoff() - Write a Unversal Payload handoff structure
+ *
+ * upl: UPL state to write
+ * @root: root node to write it to
+ * @skip_existing: Avoid recreating any nodes which already exist in the
+ * devicetree. For example, if there is a serial node, just leave it alone,
+ * since don't need to create a new one
+ * Return: 0 on success, -ve on error
+ */
+int upl_write_handoff(const struct upl *upl, ofnode root, bool skip_existing);
+
+/**
+ * upl_create_handoff_tree() - Write a Unversal Payload handoff structure
+ *
+ * upl: UPL state to write
+ * @treep: Returns a new tree containing the handoff
+ * Return: 0 on success, -ve on error
+ */
+int upl_create_handoff_tree(const struct upl *upl, oftree *treep);
+
+/**
+ * upl_read_handoff() - Read a Unversal Payload handoff structure
+ *
+ * upl: UPL state to read into
+ * @tree: Devicetree containing the data to read
+ * Return: 0 on success, -ve on error
+ */
+int upl_read_handoff(struct upl *upl, oftree tree);
+
+#if CONFIG_IS_ENABLED(UPL)
+
+/**
+ * upl_set_fit_info() - Set up basic info about the FIT
+ *
+ * @fit: Address of FIT
+ * @conf_offset: Configuration node being used
+ * @entry_addr: Entry address for next phase
+ */
+void upl_set_fit_info(ulong fit, int conf_offset, ulong entry_addr);
+
+/**
+ * upl_set_fit_addr() - Set up the address of the FIT
+ *
+ * @fit: Address of FIT
+ */
+void upl_set_fit_addr(ulong fit);
+
+/**
+ * upl_add_image() - Add a new image to the UPL
+ *
+ * @node: Image node offset in FIT
+ * @load_addr: Address to which images was loaded
+ * @size: Image size in bytes
+ * @desc: Description of image
+ */
+int upl_add_image(int node, ulong load_addr, ulong size, const char *desc);
+
+#else
+static inline void upl_set_fit_addr(ulong fit) {}
+static inline void upl_set_fit_info(ulong fit, int conf_offset,
+				    ulong entry_addr) {}
+static inline int upl_add_image(int node, ulong load_addr, ulong size,
+				const char *desc)
+{
+	return 0;
+}
+#endif /* UPL */
+
+/** upl_init() - Set up a UPL struct */
+void upl_init(struct upl *upl);
+
+#endif /* __UPL_WRITE_H */
#17 lore raw

Re: [PATCH v2 10/21] upl: Add support for reading a upl handoff

Hi Heinrich,

Quoted 25 lines · Heinrich Schuchardt
Quoted 23 lines · Simon Glass

Universal Payload provides a standard way of handing off control between two firmware phases. Add support for reading the handoff information into a structure.

---

(no changes since v1)

  MAINTAINERS               |   7 +
  boot/Kconfig              |  19 ++
  boot/Makefile             |   3 +
  boot/upl_common.c         |  60 ++++
  boot/upl_common.h         |  24 ++
  boot/upl_read.c           | 588 ++++++++++++++++++++++++++++++++++++++
  configs/sandbox_defconfig |   1 +
  include/upl.h             | 352 +++++++++++++++++++++++
  8 files changed, 1054 insertions(+)

create mode 100644 boot/upl_common.c
create mode 100644 boot/upl_common.h
create mode 100644 boot/upl_read.c
create mode 100644 include/upl.h

[..]

Quoted 6 lines
Quoted 6 lines
boot/upl_read.c new file +0 -0
new file mode 100644
index 00000000000..2d8caa6ef11
@@ -0,0 +1,588 @@

[..]

Quoted 10 lines
Quoted 10 lines
boot/upl_read.c new file +10 -0
+/**
+ * decode_root_props() - Decode root properties from the tree
+ *
+ * @upl: UPL state
+ * @node: Node to decode
+ * Return 0 if OK, -ve on error
+ */
+static int decode_root_props(struct upl *upl, ofnode node)
+{
+     int ret;
Quoted 8 lines

boot/upl_read.c line 188

Quoted 4 lines
boot/upl_read.c new file +4 -0
+
+     ret = read_uint(node, UPLP_ADDRESS_CELLS, &upl->addr_cells);
+     if (!ret)
+             ret = read_uint(node, UPLP_SIZE_CELLS, &upl->size_cells);

Why do we need a special handling of addr_cells and size_cells? The device-tree provided by UPL follows the device-tree specification which requires to set these properties in the parent of the node.

This is just decoding the information so it can be used later as needed. For example, we might want to validate that it is correct before using the data.

[..]

Regards,
Simon

#18 lore raw

PATCH v2 11/21 upl: Add support for writing a upl handoff

In reply to Simon Glass

Universal Payload provides a standard way of handing off control between two firmware phases. Add support for writing the handoff information from a structure.

---

(no changes since v1)

 boot/Kconfig     |   8 +
 boot/Makefile    |   1 +
 boot/upl_write.c | 622 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 631 insertions(+)
 create mode 100644 boot/upl_write.c
boot/Kconfig +8 -0
index f371772acb9..04088ca10c0 100644
@@ -722,6 +722,7 @@ config BOOTMETH_SCRIPT
 config UPL
 	bool "upl - Universal Payload Specification"
 	imply UPL_READ
+	imply UPL_WRITE
 	help
 	  Provides support for UPL payloads and handoff information. U-Boot
 	  supports generating and accepting handoff information. The mkimage
@@ -736,6 +737,13 @@ config UPL_READ
 	  which can be used elsewhere in U-Boot. This is just the reading
 	  implementation, useful for trying it out.
 
+config UPL_WRITE
+	bool "upl - Support writing a Universal Payload handoff"
+	help
+	  Provides support for encoding a UPL-format payload from a C structure
+	  so it can be passed to another program. This is just the writing
+	  implementation, useful for trying it out.
+
 endif  # UPL
 
 endif # BOOTSTD
boot/Makefile +1 -0
index c4720d93ca3..2c4ea085015 100644
@@ -45,6 +45,7 @@ obj-$(CONFIG_$(SPL_TPL_)FDT_SIMPLEFB) += fdt_simplefb.o
 
 obj-$(CONFIG_$(SPL_TPL_)UPL) += upl_common.o
 obj-$(CONFIG_$(SPL_TPL_)UPL_READ) += upl_read.o
+obj-$(CONFIG_$(SPL_TPL_)UPL_WRITE) += upl_write.o
 
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
 obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o
boot/upl_write.c new file +622 -0

622 lines not on this page · raw message

Signature · 1 line
2.34.1
#19 lore raw

PATCH v2 12/21 upl: Add basic tests

In reply to Simon Glass

Add some unit tests to check that we can write a UPL handoff and read it back.

---

Changes in v2:
- Put the upl tests under their own subcommand to avoid bootstd init

 MAINTAINERS           |   1 +
 include/test/suites.h |   1 +
 include/upl.h         |   9 ++
 test/boot/Makefile    |   2 +
 test/boot/upl.c       | 368 ++++++++++++++++++++++++++++++++++++++++++
 test/cmd_ut.c         |   3 +
 6 files changed, 384 insertions(+)
 create mode 100644 test/boot/upl.c
MAINTAINERS +1 -0
index 23852fbde38..7150c3281ab 100644
@@ -1700,6 +1700,7 @@ S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
 F:	boot/upl*
 F:	include/upl.h
+F:	test/boot/upl.c
 
 USB
 M:	Marek Vasut <[email protected]>
include/test/suites.h +1 -0
index 365d5f20dfe..2ceef577f7f 100644
@@ -63,5 +63,6 @@ int do_ut_str(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 int do_ut_time(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 int do_ut_unicode(struct cmd_tbl *cmdtp, int flag, int argc,
 		  char *const argv[]);
+int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
 
 #endif /* __TEST_SUITES_H__ */
include/upl.h +9 -0
index 793d1e86dbb..26c5d4bc8cb 100644
@@ -307,6 +307,15 @@ int upl_create_handoff_tree(const struct upl *upl, oftree *treep);
  */
 int upl_read_handoff(struct upl *upl, oftree tree);
 
+/**
+ * upl_get_test_data() - Fill a UPL with some test data
+ *
+ * @uts: Test state (can be uninited)
+ * @upl: Returns test data
+ * Return: 0 on success, 1 on error
+ */
+int upl_get_test_data(struct unit_test_state *uts, struct upl *upl);
+
 #if CONFIG_IS_ENABLED(UPL)
 
 /**
test/boot/Makefile +2 -0
index 068522cb9e0..8ec5daa7bfe 100644
@@ -13,3 +13,5 @@ ifdef CONFIG_OF_LIVE
 obj-$(CONFIG_BOOTMETH_VBE_SIMPLE) += vbe_simple.o
 endif
 obj-$(CONFIG_BOOTMETH_VBE) += vbe_fixup.o
+
+obj-$(CONFIG_UPL) += upl.o
test/boot/upl.c new file +368 -0

368 lines not on this page · raw message

test/cmd_ut.c +3 -0
index 4e4aa8f1cb2..38ba89ee33e 100644
@@ -133,6 +133,9 @@ static struct cmd_tbl cmd_ut_sub[] = {
 #ifdef CONFIG_CMD_SEAMA
 	U_BOOT_CMD_MKENT(seama, CONFIG_SYS_MAXARGS, 1, do_ut_seama, "", ""),
 #endif
+#ifdef CONFIG_CMD_UPL
+	U_BOOT_CMD_MKENT(upl, CONFIG_SYS_MAXARGS, 1, do_ut_upl, "", ""),
+#endif
 };
 
 static int do_ut_all(struct cmd_tbl *cmdtp, int flag, int argc,
Signature · 1 line
2.34.1
#20 lore raw

PATCH v2 13/21 upl: Add a command

In reply to Simon Glass

Add a 'upl' command to work with Universal Payload features. For now it only supports reading and writing a handoff structure.

---

(no changes since v1)

 MAINTAINERS                       |   2 +
 boot/Kconfig                      |   1 +
 cmd/Kconfig                       |   7 ++
 cmd/Makefile                      |   1 +
 cmd/upl.c                         | 118 +++++++++++++++++++
 doc/usage/cmd/upl.rst             | 186 ++++++++++++++++++++++++++++++
 doc/usage/index.rst               |   1 +
 include/asm-generic/global_data.h |  15 +++
 test/boot/upl.c                   |  40 +++++++
 9 files changed, 371 insertions(+)
 create mode 100644 cmd/upl.c
 create mode 100644 doc/usage/cmd/upl.rst
MAINTAINERS +2 -0
index 7150c3281ab..2932273c0d7 100644
@@ -1699,6 +1699,8 @@ M:	Simon Glass <[email protected]>
 S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
 F:	boot/upl*
+F:	cmd/upl.c
+F:	doc/usage/cmd/upl.rst
 F:	include/upl.h
 F:	test/boot/upl.c
 
boot/Kconfig +1 -0
index 04088ca10c0..6c322ac99bd 100644
@@ -721,6 +721,7 @@ config BOOTMETH_SCRIPT
 
 config UPL
 	bool "upl - Universal Payload Specification"
+	imply CMD_UPL
 	imply UPL_READ
 	imply UPL_WRITE
 	help
cmd/Kconfig +7 -0
index 0cf0d8ad8ab..3c602bd5ba3 100644
@@ -388,6 +388,13 @@ config CMD_SEAMA
 	help
 	  Support reading NAND Seattle Image (SEAMA) images.
 
+config CMD_UPL
+	bool "upl - Universal Payload Specification"
+	help
+	  Provides commands to deal with UPL payloads and handoff information.
+	  U-Boot supports generating and accepting handoff information. The
+	  mkimage tool will eventually support creating payloads.
+
 config CMD_VBE
 	bool "vbe - Verified Boot for Embedded"
 	depends on BOOTMETH_VBE
cmd/Makefile +1 -0
index 87133cc27a8..91227f1249c 100644
@@ -189,6 +189,7 @@ obj-$(CONFIG_CMD_UBIFS) += ubifs.o
 obj-$(CONFIG_CMD_UNIVERSE) += universe.o
 obj-$(CONFIG_CMD_UNLZ4) += unlz4.o
 obj-$(CONFIG_CMD_UNZIP) += unzip.o
+obj-$(CONFIG_CMD_UPL) += upl.o
 obj-$(CONFIG_CMD_VIRTIO) += virtio.o
 obj-$(CONFIG_CMD_WDT) += wdt.o
 obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
cmd/upl.c new file +118 -0

118 lines not on this page · raw message

doc/usage/cmd/upl.rst new file +186 -0

186 lines not on this page · raw message

doc/usage/index.rst +1 -0
index 2f211f748ab..43f8588e695 100644
@@ -112,6 +112,7 @@ Shell commands
    cmd/tftpput
    cmd/trace
    cmd/true
+   cmd/upl
    cmd/ums
    cmd/unbind
    cmd/ut
include/asm-generic/global_data.h +15 -0
index aa336d63e3a..98d822530d8 100644
@@ -30,6 +30,7 @@
 
 struct acpi_ctx;
 struct driver_rt;
+struct upl;
 
 typedef struct global_data gd_t;
 
@@ -491,6 +492,12 @@ struct global_data {
 	 * @dmtag_list: List of DM tags
 	 */
 	struct list_head dmtag_list;
+#if CONFIG_IS_ENABLED(UPL)
+	/**
+	 * @upl: Universal Payload-handoff information
+	 */
+	struct upl *upl;
+#endif
 };
 #ifndef DO_DEPS_ONLY
 static_assert(sizeof(struct global_data) == GD_SIZE);
@@ -590,6 +597,14 @@ static_assert(sizeof(struct global_data) == GD_SIZE);
 #define gd_malloc_ptr()		0L
 #endif
 
+#if CONFIG_IS_ENABLED(UPL)
+#define gd_upl()		gd->upl
+#define gd_set_upl(_val)	gd->upl = (_val)
+#else
+#define gd_upl()		NULL
+#define gd_set_upl(val)
+#endif
+
 /**
  * enum gd_flags - global data flags
  *
test/boot/upl.c +40 -0
index e9d92efd80d..c55f1d297d1 100644
@@ -358,6 +358,46 @@ static int upl_test_base(struct unit_test_state *uts)
 }
 UPL_TEST(upl_test_base, 0);
 
+/* Test 'upl info' command */
+static int upl_test_info(struct unit_test_state *uts)
+{
+	gd_set_upl(NULL);
+	ut_assertok(run_command("upl info", 0));
+	ut_assert_nextline("UPL state: inactive");
+	ut_assert_console_end();
+
+	gd_set_upl((struct upl *)uts);	/* set it to any non-zero value */
+	ut_assertok(run_command("upl info", 0));
+	ut_assert_nextline("UPL state: active");
+	ut_assert_console_end();
+	gd_set_upl(NULL);
+
+	return 0;
+}
+UPL_TEST(upl_test_info, UT_TESTF_CONSOLE_REC);
+
+/* Test 'upl read' and 'upl_write' commands */
+static int upl_test_read_write(struct unit_test_state *uts)
+{
+	ulong addr;
+
+	if (!CONFIG_IS_ENABLED(OFNODE_MULTI_TREE))
+		return -EAGAIN;  /* skip test */
+	ut_assertok(run_command("upl write", 0));
+
+	addr = env_get_hex("upladdr", 0);
+	ut_assert_nextline("UPL handoff written to %lx size %lx", addr,
+			   env_get_hex("uplsize", 0));
+	ut_assert_console_end();
+
+	ut_assertok(run_command("upl read ${upladdr}", 0));
+	ut_assert_nextline("Reading UPL at %lx", addr);
+	ut_assert_console_end();
+
+	return 0;
+}
+UPL_TEST(upl_test_read_write, UT_TESTF_CONSOLE_REC);
+
 int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	struct unit_test *tests = UNIT_TEST_SUITE_START(upl_test);
Signature · 1 line
2.34.1
#21 lore raw

PATCH v2 14/21 upl: Add support for Universal Payload in SPL

In reply to Simon Glass

Add the basic code to create a handoff structure in SPL, so it can be passed to the next phase. For now this is not plumbed in.

---

Changes in v2:
- Add a function to init the UPL process in SPL

 MAINTAINERS          |   1 +
 boot/Kconfig         |  32 ++++++++
 common/spl/Makefile  |   2 +
 common/spl/spl_upl.c | 171 +++++++++++++++++++++++++++++++++++++++++++
 include/spl.h        |  16 ++++
 5 files changed, 222 insertions(+)
 create mode 100644 common/spl/spl_upl.c
MAINTAINERS +1 -0
index 2932273c0d7..5078e8c30f0 100644
@@ -1700,6 +1700,7 @@ S:	Maintained
 T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
 F:	boot/upl*
 F:	cmd/upl.c
+F:	common/spl/spl_upl.c
 F:	doc/usage/cmd/upl.rst
 F:	include/upl.h
 F:	test/boot/upl.c
boot/Kconfig +32 -0
index 6c322ac99bd..3b7c8dd663c 100644
@@ -724,6 +724,7 @@ config UPL
 	imply CMD_UPL
 	imply UPL_READ
 	imply UPL_WRITE
+	imply SPL_UPL if SPL
 	help
 	  Provides support for UPL payloads and handoff information. U-Boot
 	  supports generating and accepting handoff information. The mkimage
@@ -740,11 +741,42 @@ config UPL_READ
 
 config UPL_WRITE
 	bool "upl - Support writing a Universal Payload handoff"
+	help
+	  Provides support for encoding a UPL-format payload from a C structure
+	  so it can be passed to another program. This is just the writing
+	  implementation, useful for trying it out. See SPL_UPL_OUT
+	  for how to tell U-Boot SPL to actually write it before jumping to
+	  the next phase.
+
+if SPL
+
+config SPL_UPL
+	bool "Write a UPL handoff in SPL"
+	imply SPL_UPL_OUT
+	help
+	  This tells SPL to write a UPL handoff and pass it to the next phase
+	  (e.g. to U-Boot or another program which SPL loads and runs). THis
+	  provides information to help that program run correctly and
+	  efficiently on the machine.
+
+config SPL_UPL_WRITE
+	bool  # upl - Support writing a Universal Payload handoff in SPL
+	select SPL_BLOBLIST
 	help
 	  Provides support for encoding a UPL-format payload from a C structure
 	  so it can be passed to another program. This is just the writing
 	  implementation, useful for trying it out.
 
+config SPL_UPL_OUT
+	bool "upl - Support writing a Universal Payload handoff in SPL"
+	select SPL_UPL_WRITE
+	help
+	  Provides support for encoding a UPL-format payload and passing it to
+	  the next firmware phase. This allows U-Boot SPL to function as
+	  Platform Init in the meaning of the specification.
+
+endif  # SPL
+
 endif  # UPL
 
 endif # BOOTSTD
common/spl/Makefile +2 -0
index 4809f9c3ec1..137b18428bd 100644
@@ -37,3 +37,5 @@ obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
 obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
 obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
 endif
+
+obj-$(CONFIG_$(SPL_TPL_)UPL) += spl_upl.o
common/spl/spl_upl.c new file +171 -0

171 lines not on this page · raw message

include/spl.h +16 -0
index 5dfdf778d2d..089b1864c57 100644
@@ -1074,4 +1074,20 @@ static inline bool spl_decompression_enabled(void)
 {
 	return IS_ENABLED(CONFIG_SPL_GZIP) || IS_ENABLED(CONFIG_SPL_LZMA);
 }
+
+/**
+ * spl_write_upl_handoff() - Write a Universal Payload hand-off structure
+ *
+ * @spl_image: Information about the image being booted
+ * Return: 0 if OK, -ve on error
+ */
+int spl_write_upl_handoff(struct spl_image_info *spl_image);
+
+/**
+ * spl_upl_init() - Get UPL ready for information to be added
+ *
+ * This must be called before upl_add_image(), etc.
+ */
+void spl_upl_init(void);
+
 #endif
Signature · 1 line
2.34.1
#22 lore raw

PATCH v2 15/21 spl: Plumb in the Universal Payload handoff

In reply to Simon Glass

Specify the FIT and include information about each loaded image, as required by the UPL handoff.

Write the UPL handoff into the bloblist before jumping to the next phase.

Control this using a runtime flag to avoid conflicting with other handoff mechanisms.

---

Changes in v2:
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL

 common/spl/spl.c                  |  8 ++++++++
 common/spl/spl_fit.c              | 22 ++++++++++++++++++++++
 include/asm-generic/global_data.h |  4 ++++
 3 files changed, 34 insertions(+)
common/spl/spl.c +8 -0
index 7794ddccade..d6a364de6ee 100644
@@ -810,6 +810,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 			printf(SPL_TPL_PROMPT
 			       "SPL hand-off write failed (err=%d)\n", ret);
 	}
+	if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+		ret = spl_write_upl_handoff(&spl_image);
+		if (ret) {
+			printf(SPL_TPL_PROMPT
+			       "UPL hand-off write failed (err=%d)\n", ret);
+			hang();
+		}
+	}
 	if (CONFIG_IS_ENABLED(BLOBLIST)) {
 		ret = bloblist_finish();
 		if (ret)
common/spl/spl_fit.c +22 -0
index 2a097f4464c..b288f675ae3 100644
@@ -12,6 +12,7 @@
 #include <memalign.h>
 #include <mapmem.h>
 #include <spl.h>
+#include <upl.h>
 #include <sysinfo.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
@@ -645,6 +646,8 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx,
 		printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
 		return ret;
 	}
+	upl_add_image(node, fpga_image.load_addr, fpga_image.size,
+		      fdt_getprop(ctx->fit, node, FIT_DESC_PROP, NULL));
 
 	return spl_fit_upload_fpga(ctx, node, &fpga_image);
 }
@@ -768,6 +771,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 	if (ret)
 		return ret;
 
+	upl_add_image(node, spl_image->load_addr, spl_image->size,
+		      fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
+
 	/*
 	 * For backward compatibility, we treat the first node that is
 	 * as a U-Boot image, if no OS-type has been declared.
@@ -811,6 +817,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 			       __func__, index, ret);
 			return ret;
 		}
+		upl_add_image(node, image_info.load_addr, image_info.size,
+			      fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
 
 		if (spl_fit_image_is_fpga(ctx.fit, node))
 			spl_fit_upload_fpga(&ctx, node, &image_info);
@@ -847,6 +855,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 		spl_image->entry_point = spl_image->load_addr;
 
 	spl_image->flags |= SPL_FIT_FOUND;
+	upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+			 spl_image->entry_point);
 
 	return 0;
 }
@@ -891,6 +901,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
 	if (ret < 0)
 		return ret;
 
+	upl_add_image(ret, fw_data, fw_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
 	spl_image->size = fw_len;
 	spl_image->load_addr = fw_data;
 	if (fit_image_get_entry(header, ret, &spl_image->entry_point))
@@ -911,6 +924,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
 	if (ret >= 0) {
 		spl_image->fdt_addr = (void *)dt_data;
 
+		upl_add_image(ret, dt_data, dt_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
 		if (spl_image->os == IH_OS_U_BOOT) {
 			/* HACK: U-Boot expects FDT at a specific address */
 			fdt_hack = spl_image->load_addr + spl_image->size;
@@ -940,7 +956,13 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
 				     &img_data, &img_len);
 		if (ret < 0)
 			return ret;
+		upl_add_image(ret, img_data, img_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
 	}
 
+	spl_image->flags |= SPL_FIT_FOUND;
+	upl_set_fit_info(map_to_sysmem(header), conf_noffset,
+			 spl_image->entry_point);
+
 	return 0;
 }
include/asm-generic/global_data.h +4 -0
index 98d822530d8..37643a4bbb9 100644
@@ -716,6 +716,10 @@ enum gd_flags {
 	 * @GD_FLG_HUSH_MODERN_PARSER: Use hush 2021 parser.
 	 */
 	GD_FLG_HUSH_MODERN_PARSER = 0x2000000,
+	/**
+	 * @GD_FLG_UPL: Read/write a Universal Payload (UPL) handoff
+	 */
+	GD_FLG_UPL = 0x4000000,
 };
 
 #endif /* __ASSEMBLY__ */
Signature · 1 line
2.34.1
#23 lore raw

Re: [PATCH v2 15/21] spl: Plumb in the Universal Payload handoff

Quoted 52 lines · Simon Glass

Specify the FIT and include information about each loaded image, as required by the UPL handoff.

Write the UPL handoff into the bloblist before jumping to the next phase.

Control this using a runtime flag to avoid conflicting with other handoff mechanisms.

---

Changes in v2:
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL

  common/spl/spl.c                  |  8 ++++++++
  common/spl/spl_fit.c              | 22 ++++++++++++++++++++++
  include/asm-generic/global_data.h |  4 ++++
  3 files changed, 34 insertions(+)
common/spl/spl.c +8 -0
index 7794ddccade..d6a364de6ee 100644
@@ -810,6 +810,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
  			printf(SPL_TPL_PROMPT
  			       "SPL hand-off write failed (err=%d)\n", ret);
  	}
+	if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+		ret = spl_write_upl_handoff(&spl_image);
+		if (ret) {
+			printf(SPL_TPL_PROMPT
+			       "UPL hand-off write failed (err=%d)\n", ret);
+			hang();
+		}
+	}
  	if (CONFIG_IS_ENABLED(BLOBLIST)) {
  		ret = bloblist_finish();
  		if (ret)
common/spl/spl_fit.c +1 -0
index 2a097f4464c..b288f675ae3 100644
@@ -12,6 +12,7 @@
  #include <memalign.h>
  #include <mapmem.h>
  #include <spl.h>
+#include <upl.h>
  #include <sysinfo.h>
  #include <asm/global_data.h>
  #include <asm/io.h>

common/spl/spl_fit.c static int spl_fit_load_fpga(struct spl_fit_info *ctx, · line 650

Quoted 5 lines
common/spl/spl_fit.c +2 -0
@@ -645,6 +646,8 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx,
  		printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
  		return ret;
  	}
+	upl_add_image(node, fpga_image.load_addr, fpga_image.size,
+		      fdt_getprop(ctx->fit, node, FIT_DESC_PROP, NULL));

Does load_addr even make sense for FPGAs?

And I noticed that you always call this after load_simple_fit/fit_image_load. Could we call upl_add_image in those functions instead?

Quoted 22 lines
common/spl/spl_fit.c +5 -0
  	return spl_fit_upload_fpga(ctx, node, &fpga_image);
  }
@@ -768,6 +771,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
  	if (ret)
  		return ret;
 
+	upl_add_image(node, spl_image->load_addr, spl_image->size,
+		      fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
+
  	/*
  	 * For backward compatibility, we treat the first node that is
  	 * as a U-Boot image, if no OS-type has been declared.
@@ -811,6 +817,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
  			       __func__, index, ret);
  			return ret;
  		}
+		upl_add_image(node, image_info.load_addr, image_info.size,
+			      fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
 
  		if (spl_fit_image_is_fpga(ctx.fit, node))
  			spl_fit_upload_fpga(&ctx, node, &image_info);

common/spl/spl_fit.c int spl_load_simple_fit(struct spl_image_info *spl_image, · line 859

Quoted 5 lines
common/spl/spl_fit.c +2 -0
@@ -847,6 +855,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
  		spl_image->entry_point = spl_image->load_addr;
 
  	spl_image->flags |= SPL_FIT_FOUND;
+	upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+			 spl_image->entry_point);

I think this should be virt_to_phys, since we aren't really mapping it.

Quoted 24 lines
common/spl/spl_fit.c +6 -0
  	return 0;
  }
@@ -891,6 +901,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
  	if (ret < 0)
  		return ret;
 
+	upl_add_image(ret, fw_data, fw_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
  	spl_image->size = fw_len;
  	spl_image->load_addr = fw_data;
  	if (fit_image_get_entry(header, ret, &spl_image->entry_point))
@@ -911,6 +924,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
  	if (ret >= 0) {
  		spl_image->fdt_addr = (void *)dt_data;
 
+		upl_add_image(ret, dt_data, dt_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
  		if (spl_image->os == IH_OS_U_BOOT) {
  			/* HACK: U-Boot expects FDT at a specific address */
  			fdt_hack = spl_image->load_addr + spl_image->size;

common/spl/spl_fit.c int spl_load_fit_image(struct spl_image_info *spl_image, · line 963

Quoted 8 lines
common/spl/spl_fit.c +3 -0
@@ -940,7 +956,13 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
  				     &img_data, &img_len);
  		if (ret < 0)
  			return ret;
+		upl_add_image(ret, img_data, img_len,
+		      fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
  	}
 
+	spl_image->flags |= SPL_FIT_FOUND;

This change is unrelated and should be moved into a separate commit.

Quoted 20 lines
common/spl/spl_fit.c +3 -0
+	upl_set_fit_info(map_to_sysmem(header), conf_noffset,
+			 spl_image->entry_point);
+
  	return 0;
  }
include/asm-generic/global_data.h +4 -0
index 98d822530d8..37643a4bbb9 100644
@@ -716,6 +716,10 @@ enum gd_flags {
  	 * @GD_FLG_HUSH_MODERN_PARSER: Use hush 2021 parser.
  	 */
  	GD_FLG_HUSH_MODERN_PARSER = 0x2000000,
+	/**
+	 * @GD_FLG_UPL: Read/write a Universal Payload (UPL) handoff
+	 */
+	GD_FLG_UPL = 0x4000000,
  };
 
  #endif /* __ASSEMBLY__ */
#24 lore raw

Re: [PATCH v2 15/21] spl: Plumb in the Universal Payload handoff

Hi Sean,

Quoted 53 lines · Sean Anderson
Quoted 51 lines · Simon Glass

Specify the FIT and include information about each loaded image, as required by the UPL handoff.

Write the UPL handoff into the bloblist before jumping to the next phase.

Control this using a runtime flag to avoid conflicting with other handoff mechanisms.

---

Changes in v2:
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL

  common/spl/spl.c                  |  8 ++++++++
  common/spl/spl_fit.c              | 22 ++++++++++++++++++++++
  include/asm-generic/global_data.h |  4 ++++
  3 files changed, 34 insertions(+)
common/spl/spl.c +8 -0
index 7794ddccade..d6a364de6ee 100644
@@ -810,6 +810,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
                      printf(SPL_TPL_PROMPT
                             "SPL hand-off write failed (err=%d)\n", ret);
      }
+     if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+             ret = spl_write_upl_handoff(&spl_image);
+             if (ret) {
+                     printf(SPL_TPL_PROMPT
+                            "UPL hand-off write failed (err=%d)\n", ret);
+                     hang();
+             }
+     }
      if (CONFIG_IS_ENABLED(BLOBLIST)) {
              ret = bloblist_finish();
              if (ret)
common/spl/spl_fit.c +1 -0
index 2a097f4464c..b288f675ae3 100644
@@ -12,6 +12,7 @@
  #include <memalign.h>
  #include <mapmem.h>
  #include <spl.h>
+#include <upl.h>
  #include <sysinfo.h>
  #include <asm/global_data.h>
  #include <asm/io.h>
Quoted 8 lines

common/spl/spl_fit.c static int spl_fit_load_fpga(struct spl_fit_info *ctx, · line 650

Quoted 6 lines
common/spl/spl_fit.c +2 -0
@@ -645,6 +646,8 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx,
              printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
              return ret;
      }
+     upl_add_image(node, fpga_image.load_addr, fpga_image.size,
+                   fdt_getprop(ctx->fit, node, FIT_DESC_PROP, NULL));

Does load_addr even make sense for FPGAs?

Well the images do get loaded into RAM at a particular address.

Quoted 3 lines

And I noticed that you always call this after load_simple_fit/fit_image_load. Could we call upl_add_image in those functions instead?

Yes, although it means compiling upl.h for the host. Perhaps it isn't that bad though and it avoids repeating code.

Quoted 25 lines
Quoted 25 lines
common/spl/spl_fit.c +5 -0
      return spl_fit_upload_fpga(ctx, node, &fpga_image);
  }
@@ -768,6 +771,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
      if (ret)
              return ret;
 
+     upl_add_image(node, spl_image->load_addr, spl_image->size,
+                   fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
+
      /*
       * For backward compatibility, we treat the first node that is
       * as a U-Boot image, if no OS-type has been declared.
@@ -811,6 +817,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
                             __func__, index, ret);
                      return ret;
              }
+             upl_add_image(node, image_info.load_addr, image_info.size,
+                           fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
 
              if (spl_fit_image_is_fpga(ctx.fit, node))
                      spl_fit_upload_fpga(&ctx, node, &image_info);
@@ -847,6 +855,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
              spl_image->entry_point = spl_image->load_addr;
 
Quoted 5 lines

common/spl/spl_fit.c int spl_load_simple_fit(struct spl_image_info *spl_image, · line 859

Quoted 3 lines
common/spl/spl_fit.c +2 -0
      spl_image->flags |= SPL_FIT_FOUND;
+     upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+                      spl_image->entry_point);

I think this should be virt_to_phys, since we aren't really mapping it.

We want to pass the address, which (for sandbox) has to be able to be mapped back to a pointer. Everywhere else in sandbox this is how we handle that...

Quoted 32 lines
Quoted 32 lines
common/spl/spl_fit.c +8 -0
      return 0;
  }
@@ -891,6 +901,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
      if (ret < 0)
              return ret;
 
+     upl_add_image(ret, fw_data, fw_len,
+                   fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
      spl_image->size = fw_len;
      spl_image->load_addr = fw_data;
      if (fit_image_get_entry(header, ret, &spl_image->entry_point))
@@ -911,6 +924,9 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
      if (ret >= 0) {
              spl_image->fdt_addr = (void *)dt_data;
 
+             upl_add_image(ret, dt_data, dt_len,
+                   fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
+
              if (spl_image->os == IH_OS_U_BOOT) {
                      /* HACK: U-Boot expects FDT at a specific address */
                      fdt_hack = spl_image->load_addr + spl_image->size;
@@ -940,7 +956,13 @@ int spl_load_fit_image(struct spl_image_info *spl_image,
                                   &img_data, &img_len);
              if (ret < 0)
                      return ret;
+             upl_add_image(ret, img_data, img_len,
+                   fdt_getprop((void *)header, ret, FIT_DESC_PROP, NULL));
      }
 
Quoted 3 lines

common/spl/spl_fit.c int spl_load_fit_image(struct spl_image_info *spl_image, · line 963

Quoted 1 line
common/spl/spl_fit.c +1 -0
+     spl_image->flags |= SPL_FIT_FOUND;

This change is unrelated and should be moved into a separate commit.

OK

Regards,
Simon

#25 lore raw

Re: [PATCH v2 15/21] spl: Plumb in the Universal Payload handoff

Quoted 65 lines · Simon Glass

Hi Sean,

Quoted 53 lines · Sean Anderson
Quoted 51 lines · Simon Glass

Specify the FIT and include information about each loaded image, as required by the UPL handoff.

Write the UPL handoff into the bloblist before jumping to the next phase.

Control this using a runtime flag to avoid conflicting with other handoff mechanisms.

---

Changes in v2:
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL

   common/spl/spl.c                  |  8 ++++++++
   common/spl/spl_fit.c              | 22 ++++++++++++++++++++++
   include/asm-generic/global_data.h |  4 ++++
   3 files changed, 34 insertions(+)
common/spl/spl.c +8 -0
index 7794ddccade..d6a364de6ee 100644
@@ -810,6 +810,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
                       printf(SPL_TPL_PROMPT
                              "SPL hand-off write failed (err=%d)\n", ret);
       }
+     if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+             ret = spl_write_upl_handoff(&spl_image);
+             if (ret) {
+                     printf(SPL_TPL_PROMPT
+                            "UPL hand-off write failed (err=%d)\n", ret);
+                     hang();
+             }
+     }
       if (CONFIG_IS_ENABLED(BLOBLIST)) {
               ret = bloblist_finish();
               if (ret)
common/spl/spl_fit.c +1 -0
index 2a097f4464c..b288f675ae3 100644
@@ -12,6 +12,7 @@
   #include <memalign.h>
   #include <mapmem.h>
   #include <spl.h>
+#include <upl.h>
   #include <sysinfo.h>
   #include <asm/global_data.h>
   #include <asm/io.h>
Quoted 8 lines

common/spl/spl_fit.c static int spl_fit_load_fpga(struct spl_fit_info *ctx, · line 650

Quoted 6 lines
common/spl/spl_fit.c +2 -0
@@ -645,6 +646,8 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx,
               printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
               return ret;
       }
+     upl_add_image(node, fpga_image.load_addr, fpga_image.size,
+                   fdt_getprop(ctx->fit, node, FIT_DESC_PROP, NULL));

Does load_addr even make sense for FPGAs?

Quoted 1 line

Well the images do get loaded into RAM at a particular address.

No they don't. I mean, technically yes, but it's just an intermediate step before being programmed into the FPGA. Much like how executable boot images may be loaded to an intermediate address before being copied to their final location. And the load_addr is set to 0 a few lines above.

But don't bother special-casing this if you do the next part.

Quoted 6 lines
Quoted 3 lines

And I noticed that you always call this after load_simple_fit/fit_image_load. Could we call upl_add_image in those functions instead?

Yes, although it means compiling upl.h for the host. Perhaps it isn't that bad though and it avoids repeating code.

I would prefer that to help ensure that future programmers don't forget it.

Quoted 31 lines
Quoted 25 lines
Quoted 25 lines
common/spl/spl_fit.c +5 -0
       return spl_fit_upload_fpga(ctx, node, &fpga_image);
   }
@@ -768,6 +771,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
       if (ret)
               return ret;
 
+     upl_add_image(node, spl_image->load_addr, spl_image->size,
+                   fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
+
       /*
        * For backward compatibility, we treat the first node that is
        * as a U-Boot image, if no OS-type has been declared.
@@ -811,6 +817,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
                              __func__, index, ret);
                       return ret;
               }
+             upl_add_image(node, image_info.load_addr, image_info.size,
+                           fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
 
               if (spl_fit_image_is_fpga(ctx.fit, node))
                       spl_fit_upload_fpga(&ctx, node, &image_info);
@@ -847,6 +855,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
               spl_image->entry_point = spl_image->load_addr;
 
Quoted 5 lines

common/spl/spl_fit.c int spl_load_simple_fit(struct spl_image_info *spl_image, · line 859

Quoted 3 lines
common/spl/spl_fit.c +2 -0
       spl_image->flags |= SPL_FIT_FOUND;
+     upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+                      spl_image->entry_point);

I think this should be virt_to_phys, since we aren't really mapping it.

Quoted 3 lines

We want to pass the address, which (for sandbox) has to be able to be mapped back to a pointer. Everywhere else in sandbox this is how we handle that...

This is really a nit. But I thought that map_to_sysmem implied a pairing with unmap. But I guess that's map_physmem.

--Sean

#26 lore raw

Re: [PATCH v2 15/21] spl: Plumb in the Universal Payload handoff

Hi Sean,

Quoted 67 lines · Sean Anderson
Quoted 65 lines · Simon Glass

Hi Sean,

Quoted 61 lines · Sean Anderson
Quoted 52 lines · Simon Glass

Specify the FIT and include information about each loaded image, as required by the UPL handoff.

Write the UPL handoff into the bloblist before jumping to the next phase.

Control this using a runtime flag to avoid conflicting with other handoff mechanisms.

---

Changes in v2:
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL

   common/spl/spl.c                  |  8 ++++++++
   common/spl/spl_fit.c              | 22 ++++++++++++++++++++++
   include/asm-generic/global_data.h |  4 ++++
   3 files changed, 34 insertions(+)
common/spl/spl.c +8 -0
index 7794ddccade..d6a364de6ee 100644
@@ -810,6 +810,14 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
                       printf(SPL_TPL_PROMPT
                              "SPL hand-off write failed (err=%d)\n", ret);
       }
+     if (CONFIG_IS_ENABLED(UPL_OUT) && (gd->flags & GD_FLG_UPL)) {
+             ret = spl_write_upl_handoff(&spl_image);
+             if (ret) {
+                     printf(SPL_TPL_PROMPT
+                            "UPL hand-off write failed (err=%d)\n", ret);
+                     hang();
+             }
+     }
       if (CONFIG_IS_ENABLED(BLOBLIST)) {
               ret = bloblist_finish();
               if (ret)
common/spl/spl_fit.c +1 -0
index 2a097f4464c..b288f675ae3 100644
@@ -12,6 +12,7 @@
   #include <memalign.h>
   #include <mapmem.h>
   #include <spl.h>
+#include <upl.h>
   #include <sysinfo.h>
   #include <asm/global_data.h>
   #include <asm/io.h>

common/spl/spl_fit.c static int spl_fit_load_fpga(struct spl_fit_info *ctx, · line 650

Quoted 5 lines
common/spl/spl_fit.c +2 -0
@@ -645,6 +646,8 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx,
               printf("%s: Cannot load the FPGA: %i\n", __func__, ret);
               return ret;
       }
+     upl_add_image(node, fpga_image.load_addr, fpga_image.size,
+                   fdt_getprop(ctx->fit, node, FIT_DESC_PROP, NULL));

Does load_addr even make sense for FPGAs?

Quoted 8 lines
Quoted 1 line

Well the images do get loaded into RAM at a particular address.

No they don't. I mean, technically yes, but it's just an intermediate step before being programmed into the FPGA. Much like how executable boot images may be loaded to an intermediate address before being copied to their final location. And the load_addr is set to 0 a few lines above.

But don't bother special-casing this if you do the next part.

OK. I see the FPGA-loading happening right away. IMO this should be done later, after all images are loaded. But I suppose the code is easier the way it is.

Quoted 9 lines
Quoted 7 lines
Quoted 4 lines

And I noticed that you always call this after load_simple_fit/fit_image_load. Could we call upl_add_image in those functions instead?

Yes, although it means compiling upl.h for the host. Perhaps it isn't that bad though and it avoids repeating code.

I would prefer that to help ensure that future programmers don't forget it.

Yes.

Quoted 32 lines
Quoted 32 lines
Quoted 31 lines
Quoted 24 lines
common/spl/spl_fit.c +5 -0
       return spl_fit_upload_fpga(ctx, node, &fpga_image);
   }
@@ -768,6 +771,9 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
       if (ret)
               return ret;
 
+     upl_add_image(node, spl_image->load_addr, spl_image->size,
+                   fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
+
       /*
        * For backward compatibility, we treat the first node that is
        * as a U-Boot image, if no OS-type has been declared.
@@ -811,6 +817,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
                              __func__, index, ret);
                       return ret;
               }
+             upl_add_image(node, image_info.load_addr, image_info.size,
+                           fdt_getprop(ctx.fit, node, FIT_DESC_PROP, NULL));
 
               if (spl_fit_image_is_fpga(ctx.fit, node))
                       spl_fit_upload_fpga(&ctx, node, &image_info);

common/spl/spl_fit.c int spl_load_simple_fit(struct spl_image_info *spl_image, · line 859

Quoted 5 lines
common/spl/spl_fit.c +2 -0
@@ -847,6 +855,8 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
               spl_image->entry_point = spl_image->load_addr;
 
       spl_image->flags |= SPL_FIT_FOUND;
+     upl_set_fit_info(map_to_sysmem(ctx.fit), ctx.conf_node,
+                      spl_image->entry_point);

I think this should be virt_to_phys, since we aren't really mapping it.

Quoted 6 lines
Quoted 3 lines

We want to pass the address, which (for sandbox) has to be able to be mapped back to a pointer. Everywhere else in sandbox this is how we handle that...

This is really a nit. But I thought that map_to_sysmem implied a pairing with unmap. But I guess that's map_physmem.

Yes, map_sysmem() is the 'sandbox mapping' from an U-Boot address to a pointer, and map_to_sysmem() reverses that.

Regards,
Simon

#27 lore raw

PATCH v2 16/21 upl: Plumb in universal payload to the init process

In reply to Simon Glass

Read the UPL early in boot so that it is available. For now none of the information is used.

---

(no changes since v1)

 boot/Kconfig     | 12 +++++++++++-
 common/board_f.c | 22 ++++++++++++++++++++++
 common/board_r.c |  2 ++
 3 files changed, 35 insertions(+), 1 deletion(-)
boot/Kconfig +11 -1
index 3b7c8dd663c..e0bbfcede8a 100644
@@ -737,7 +737,9 @@ config UPL_READ
 	help
 	  Provides support for decoding a UPL-format payload into a C structure
 	  which can be used elsewhere in U-Boot. This is just the reading
-	  implementation, useful for trying it out.
+	  implementation, useful for trying it out. See UPL_IN for how
+	  to tell U-Boot to actually read it on startup and use it for memory
+	  and device information, etc.
 
 config UPL_WRITE
 	bool "upl - Support writing a Universal Payload handoff"
@@ -748,6 +750,14 @@ config UPL_WRITE
 	  for how to tell U-Boot SPL to actually write it before jumping to
 	  the next phase.
 
+config UPL_IN
+	bool "upl - Read the UPL handoff on startup"
+	select UPL_READ
+	help
+	  Read an SPL handoff when U-Boot starts and use it to provide
+	  devices, memory layout, etc. required by U-Boot. This allows U-Boot
+	  to function as a payload in the meaning of the specification.
+
 if SPL
 
 config SPL_UPL
common/board_f.c +22 -0
index 212ffb3090b..d0187c50b49 100644
@@ -40,6 +40,7 @@
 #include <sysreset.h>
 #include <timer.h>
 #include <trace.h>
+#include <upl.h>
 #include <video.h>
 #include <watchdog.h>
 #include <asm/cache.h>
@@ -862,6 +863,26 @@ __weak int clear_bss(void)
 	return 0;
 }
 
+static int initf_upl(void)
+{
+	struct upl *upl;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_UPL_IN) || !(gd->flags & GD_FLG_UPL))
+		return 0;
+
+	upl = malloc(sizeof(struct upl));
+	if (upl)
+		ret = upl_read_handoff(upl, oftree_default());
+	if (ret) {
+		printf("UPL handoff: read failure (err=%dE)\n", ret);
+		return ret;
+	}
+	gd_set_upl(upl);
+
+	return 0;
+}
+
 static const init_fnc_t init_sequence_f[] = {
 	setup_mon_len,
 #ifdef CONFIG_OF_CONTROL
@@ -871,6 +892,7 @@ static const init_fnc_t init_sequence_f[] = {
 	trace_early_init,
 #endif
 	initf_malloc,
+	initf_upl,
 	log_init,
 	initf_bootstage,	/* uses its own timer, so does not need DM */
 	event_init,
common/board_r.c +2 -0
index d4ba245ac69..f445803d7a4 100644
@@ -521,6 +521,8 @@ static int dm_announce(void)
 		       uclass_count);
 		if (CONFIG_IS_ENABLED(OF_REAL))
 			printf(", devicetree: %s", fdtdec_get_srcname());
+		if (CONFIG_IS_ENABLED(UPL))
+			printf(", universal payload active");
 		printf("\n");
 		if (IS_ENABLED(CONFIG_OF_HAS_PRIOR_STAGE) &&
 		    (gd->fdt_src == FDTSRC_SEPARATE ||
Signature · 1 line
2.34.1
#28 lore raw

PATCH v2 17/21 sandbox_vpl: Enable Universal Payload

In reply to Simon Glass

Use the sandbox_vpl build to test UPL since it supports a real devicetree in SPL. The sandbox_spl build uses OF_PLATDATA.

Enable writing the UPL handoff in SPL and reading it in U-Boot proper. Provide a test to check that this handoff works.

Note that the test uses the standard devicetree rather than the test one, since it is a lot smaller and fits in the existing bloblist.

---

(no changes since v1)

 configs/sandbox_vpl_defconfig |  4 ++++
 test/py/tests/test_upl.py     | 25 +++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 test/py/tests/test_upl.py
configs/sandbox_vpl_defconfig +4 -0
index 72483d8ba10..96e9211bd19 100644
@@ -27,6 +27,9 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_BEST_MATCH=y
 CONFIG_SPL_LOAD_FIT=y
+CONFIG_UPL=y
+CONFIG_UPL_IN=y
+CONFIG_SPL_UPL_OUT=y
 CONFIG_BOOTSTAGE=y
 CONFIG_BOOTSTAGE_REPORT=y
 CONFIG_BOOTSTAGE_FDT=y
@@ -35,6 +38,7 @@ CONFIG_BOOTSTAGE_STASH_SIZE=0x4096
 CONFIG_CONSOLE_RECORD=y
 CONFIG_CONSOLE_RECORD_OUT_SIZE=0x1000
 CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BLOBLIST_SIZE=0x5000
 CONFIG_SPL_NO_BSS_LIMIT=y
 CONFIG_HANDOFF=y
 CONFIG_SPL_BOARD_INIT=y
test/py/tests/test_upl.py new file +25 -0
new file mode 100644
index 00000000000..171079f8dba
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright 2024 Google LLC
+#
+# Test addition of Universal Payload
+
+import os
+
+import pytest
+import u_boot_utils
+
[email protected]('sandbox_vpl')
+def test_upl_handoff(u_boot_console):
+    cons = u_boot_console
+    ram = os.path.join(cons.config.build_dir, 'ram.bin')
+    fdt = os.path.join(cons.config.build_dir, 'u-boot.dtb')
+
+    # Remove any existing RAM file, so we don't have old data present
+    if os.path.exists(ram):
+        os.remove(ram)
+    flags = ['-m', ram, '-d', fdt]
+    cons.restart_uboot_with_flags(flags, use_dtb=False)
+
+    # Make sure that Universal Payload is detected in U-Boot proper
+    output = cons.run_command('upl info')
+    assert output == 'UPL state: active'
Signature · 1 line
2.34.1
#29 lore raw

PATCH v2 18/21 upl: Add initial documentation

In reply to Simon Glass

Add some documentation to explain the basic concept along with a link to the full spec.

---

Changes in v2:
- Add a link to the spec
- Add a link to the command

 MAINTAINERS           |  1 +
 doc/usage/cmd/upl.rst |  4 ++--
 doc/usage/index.rst   |  1 +
 doc/usage/upl.rst     | 46 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 50 insertions(+), 2 deletions(-)
 create mode 100644 doc/usage/upl.rst
MAINTAINERS +1 -0
index 5078e8c30f0..96faa9e1acc 100644
@@ -1701,6 +1701,7 @@ T:	git https://source.denx.de/u-boot/custodians/u-boot-dm.git
 F:	boot/upl*
 F:	cmd/upl.c
 F:	common/spl/spl_upl.c
+F:	doc/usage/upl.rst
 F:	doc/usage/cmd/upl.rst
 F:	include/upl.h
 F:	test/boot/upl.c
doc/usage/cmd/upl.rst +2 -2
index a64063d42d5..8d6ea5daa37 100644
@@ -16,8 +16,8 @@ Description
 -----------
 
 The *upl* command is used to test U-Boot's support for the Universal Payload
-Specification (UPL) firmware standard. It allows creation of a fake handoff for
-use in testing.
+Specification (UPL) firmware standard (see :doc:`../upl`). It allows creation of
+a fake handoff for use in testing.
 
 
 upl write
doc/usage/index.rst +1 -0
index 43f8588e695..28d5dcd3e30 100644
@@ -15,6 +15,7 @@ Use U-Boot
    cmdline
    semihosting
    measured_boot
+   upl
 
 Shell commands
 --------------
doc/usage/upl.rst new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.34.1
#30 lore raw

PATCH v2 19/21 sandbox: Add a flag to enable UPL

In reply to Simon Glass

UPL significantly alters the boot flow for sandbox. Add a flag to enable this so that it can be enabled only on tests which need it.

---

(no changes since v1)

 arch/sandbox/cpu/start.c         | 13 ++++++++++++-
 arch/sandbox/include/asm/state.h |  1 +
 2 files changed, 13 insertions(+), 1 deletion(-)
arch/sandbox/cpu/start.c +12 -1
index 0920ed55965..9ad5d46271a 100644
@@ -431,6 +431,14 @@ static int sandbox_cmdline_cb_autoboot_keyed(struct sandbox_state *state,
 }
 SANDBOX_CMDLINE_OPT(autoboot_keyed, 0, "Allow keyed autoboot");
 
+static int sandbox_cmdline_cb_upl(struct sandbox_state *state, const char *arg)
+{
+	state->upl = true;
+
+	return 0;
+}
+SANDBOX_CMDLINE_OPT(upl, 0, "Enable Universal Payload (UPL)");
+
 static void setup_ram_buf(struct sandbox_state *state)
 {
 	/* Zero the RAM buffer if we didn't read it, to keep valgrind happy */
@@ -540,6 +548,9 @@ int sandbox_main(int argc, char *argv[])
 			goto err;
 	}
 
+	if (state->upl)
+		gd->flags |= GD_FLG_UPL;
+
 #if CONFIG_IS_ENABLED(SYS_MALLOC_F)
 	gd->malloc_base = CFG_MALLOC_F_ADDR;
 #endif
@@ -558,7 +569,7 @@ int sandbox_main(int argc, char *argv[])
 	log_debug("debug: %s\n", __func__);
 
 	/* Do pre- and post-relocation init */
-	board_init_f(0);
+	board_init_f(gd->flags);
 
 	board_init_r(gd->new_gd, 0);
 
arch/sandbox/include/asm/state.h +1 -0
index c84a1f7060f..6b50473ed41 100644
@@ -97,6 +97,7 @@ struct sandbox_state {
 	bool autoboot_keyed;		/* Use keyed-autoboot feature */
 	bool disable_eth;		/* Disable Ethernet devices */
 	bool disable_sf_bootdevs;	/* Don't bind SPI flash bootdevs */
+	bool upl;			/* Enable Universal Payload (UPL) */
 
 	/* Pointer to information for each SPI bus/cs */
 	struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS]
Signature · 1 line
2.34.1
#31 lore raw

PATCH v2 20/21 sandbox: Add an SPL loader for UPL

In reply to Simon Glass

Add support for loading a UPL image from SPL. This uses the simple FIT implementation, but also loads the full FIT just to permit more testing.

---

(no changes since v1)

 arch/sandbox/cpu/spl.c         | 49 +++++++++++++++++++++++++++++++++-
 arch/sandbox/include/asm/spl.h |  1 +
 2 files changed, 49 insertions(+), 1 deletion(-)
arch/sandbox/cpu/spl.c +48 -1
index 39869f27a7b..f665f86d64c 100644
@@ -3,14 +3,18 @@
  * Copyright (c) 2016 Google, Inc
  */
 
+#define LOG_CATEGORY	LOGC_BOOT
+
 #include <dm.h>
 #include <hang.h>
 #include <handoff.h>
 #include <image.h>
 #include <init.h>
 #include <log.h>
+#include <mapmem.h>
 #include <os.h>
 #include <spl.h>
+#include <upl.h>
 #include <asm/global_data.h>
 #include <asm/spl.h>
 #include <asm/state.h>
@@ -52,7 +56,8 @@ void board_init_f(ulong flag)
 void board_boot_order(u32 *spl_boot_list)
 {
 	spl_boot_list[0] = BOOT_DEVICE_VBE;
-	spl_boot_list[1] = BOOT_DEVICE_BOARD;
+	spl_boot_list[1] = BOOT_DEVICE_UPL;
+	spl_boot_list[2] = BOOT_DEVICE_BOARD;
 }
 
 static int spl_board_load_file(struct spl_image_info *spl_image,
@@ -246,3 +251,45 @@ int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
 
 	return 0;
 }
+
+static int upl_load_from_image(struct spl_image_info *spl_image,
+			       struct spl_boot_device *bootdev)
+{
+	long long size;
+	char *fname;
+	int ret, fd;
+	ulong addr;
+
+	if (!CONFIG_IS_ENABLED(UPL_OUT))
+		return -ENOTSUPP;
+
+	spl_upl_init();
+	fname = os_malloc(256);
+
+	ret = sandbox_spl_load_fit(fname, 256, spl_image);
+	if (ret)
+		return log_msg_ret("fit", ret);
+	spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+	spl_image->arg = map_sysmem(spl_image->load_addr, 0);
+	/* size is set by load_simple_fit(), offset is left as 0 */
+
+	/* now read the whole FIT into memory */
+	fd = os_open(fname, OS_O_RDONLY);
+	if (fd < 0)
+		return log_msg_ret("op2", -ENOENT);
+	if (os_get_filesize(fname,  &size))
+		return log_msg_ret("fis", -ENOENT);
+
+	/* place it after the loaded image, allowing plenty of space */
+	addr = ALIGN(spl_image->load_addr + size, 0x1000);
+	log_debug("Loading whole FIT to %lx\n", addr);
+	if (os_read(fd, map_sysmem(addr, 0), size) != size)
+		return log_msg_ret("rea", -EIO);
+	os_close(fd);
+
+	/* tell UPL where it is */
+	upl_set_fit_addr(addr);
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("upl", 4, BOOT_DEVICE_UPL, upl_load_from_image);
arch/sandbox/include/asm/spl.h +1 -0
index d50d9ad6b48..d824b2123a2 100644
@@ -18,6 +18,7 @@ enum {
 	BOOT_DEVICE_NOR,
 	BOOT_DEVICE_SPI,
 	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_UPL,
 };
 
 /**
Signature · 1 line
2.34.1
#32 lore raw

Re: [PATCH v2 20/21] sandbox: Add an SPL loader for UPL

Quoted 62 lines · Simon Glass

Add support for loading a UPL image from SPL. This uses the simple FIT implementation, but also loads the full FIT just to permit more testing.

---

(no changes since v1)

  arch/sandbox/cpu/spl.c         | 49 +++++++++++++++++++++++++++++++++-
  arch/sandbox/include/asm/spl.h |  1 +
  2 files changed, 49 insertions(+), 1 deletion(-)
arch/sandbox/cpu/spl.c +19 -1
index 39869f27a7b..f665f86d64c 100644
@@ -3,14 +3,18 @@
   * Copyright (c) 2016 Google, Inc
   */
 
+#define LOG_CATEGORY	LOGC_BOOT
+
  #include <dm.h>
  #include <hang.h>
  #include <handoff.h>
  #include <image.h>
  #include <init.h>
  #include <log.h>
+#include <mapmem.h>
  #include <os.h>
  #include <spl.h>
+#include <upl.h>
  #include <asm/global_data.h>
  #include <asm/spl.h>
  #include <asm/state.h>
@@ -52,7 +56,8 @@ void board_init_f(ulong flag)
  void board_boot_order(u32 *spl_boot_list)
  {
  	spl_boot_list[0] = BOOT_DEVICE_VBE;
-	spl_boot_list[1] = BOOT_DEVICE_BOARD;
+	spl_boot_list[1] = BOOT_DEVICE_UPL;
+	spl_boot_list[2] = BOOT_DEVICE_BOARD;
  }
 
  static int spl_board_load_file(struct spl_image_info *spl_image,
@@ -246,3 +251,45 @@ int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
 
  	return 0;
  }
+
+static int upl_load_from_image(struct spl_image_info *spl_image,
+			       struct spl_boot_device *bootdev)
+{
+	long long size;
+	char *fname;
+	int ret, fd;
+	ulong addr;
+
+	if (!CONFIG_IS_ENABLED(UPL_OUT))
+		return -ENOTSUPP;
+
+	spl_upl_init();

arch/sandbox/cpu/spl.c int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image) · line 276

Quoted 10 lines
arch/sandbox/cpu/spl.c +10 -0
+	fname = os_malloc(256);
+
+	ret = sandbox_spl_load_fit(fname, 256, spl_image);
+	if (ret)
+		return log_msg_ret("fit", ret);
+	spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+	spl_image->arg = map_sysmem(spl_image->load_addr, 0);
+	/* size is set by load_simple_fit(), offset is left as 0 */
+
+	/* now read the whole FIT into memory */

Why do we have to do this? Didn't we just load the FIT in sandbox_spl_load_fit?

Quoted 31 lines
arch/sandbox/cpu/spl.c +19 -0
+	fd = os_open(fname, OS_O_RDONLY);
+	if (fd < 0)
+		return log_msg_ret("op2", -ENOENT);
+	if (os_get_filesize(fname,  &size))
+		return log_msg_ret("fis", -ENOENT);
+
+	/* place it after the loaded image, allowing plenty of space */
+	addr = ALIGN(spl_image->load_addr + size, 0x1000);
+	log_debug("Loading whole FIT to %lx\n", addr);
+	if (os_read(fd, map_sysmem(addr, 0), size) != size)
+		return log_msg_ret("rea", -EIO);
+	os_close(fd);
+
+	/* tell UPL where it is */
+	upl_set_fit_addr(addr);
+
+	return 0;
+}
+SPL_LOAD_IMAGE_METHOD("upl", 4, BOOT_DEVICE_UPL, upl_load_from_image);
arch/sandbox/include/asm/spl.h +1 -0
index d50d9ad6b48..d824b2123a2 100644
@@ -18,6 +18,7 @@ enum {
  	BOOT_DEVICE_NOR,
  	BOOT_DEVICE_SPI,
  	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_UPL,
  };
 
  /**
#33 lore raw

Re: [PATCH v2 20/21] sandbox: Add an SPL loader for UPL

Hi Sean,

Quoted 68 lines · Sean Anderson
Quoted 66 lines · Simon Glass

Add support for loading a UPL image from SPL. This uses the simple FIT implementation, but also loads the full FIT just to permit more testing.

---

(no changes since v1)

  arch/sandbox/cpu/spl.c         | 49 +++++++++++++++++++++++++++++++++-
  arch/sandbox/include/asm/spl.h |  1 +
  2 files changed, 49 insertions(+), 1 deletion(-)
arch/sandbox/cpu/spl.c +23 -1
index 39869f27a7b..f665f86d64c 100644
@@ -3,14 +3,18 @@
   * Copyright (c) 2016 Google, Inc
   */
 
+#define LOG_CATEGORY LOGC_BOOT
+
  #include <dm.h>
  #include <hang.h>
  #include <handoff.h>
  #include <image.h>
  #include <init.h>
  #include <log.h>
+#include <mapmem.h>
  #include <os.h>
  #include <spl.h>
+#include <upl.h>
  #include <asm/global_data.h>
  #include <asm/spl.h>
  #include <asm/state.h>
@@ -52,7 +56,8 @@ void board_init_f(ulong flag)
  void board_boot_order(u32 *spl_boot_list)
  {
      spl_boot_list[0] = BOOT_DEVICE_VBE;
-     spl_boot_list[1] = BOOT_DEVICE_BOARD;
+     spl_boot_list[1] = BOOT_DEVICE_UPL;
+     spl_boot_list[2] = BOOT_DEVICE_BOARD;
  }
 
  static int spl_board_load_file(struct spl_image_info *spl_image,
@@ -246,3 +251,45 @@ int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image)
 
      return 0;
  }
+
+static int upl_load_from_image(struct spl_image_info *spl_image,
+                            struct spl_boot_device *bootdev)
+{
+     long long size;
+     char *fname;
+     int ret, fd;
+     ulong addr;
+
+     if (!CONFIG_IS_ENABLED(UPL_OUT))
+             return -ENOTSUPP;
+
+     spl_upl_init();
+     fname = os_malloc(256);
+
+     ret = sandbox_spl_load_fit(fname, 256, spl_image);
+     if (ret)
Quoted 8 lines

arch/sandbox/cpu/spl.c int sandbox_spl_load_fit(char *fname, int maxlen, struct spl_image_info *image) · line 276

Quoted 6 lines
arch/sandbox/cpu/spl.c +6 -0
+             return log_msg_ret("fit", ret);
+     spl_image->flags = SPL_SANDBOXF_ARG_IS_BUF;
+     spl_image->arg = map_sysmem(spl_image->load_addr, 0);
+     /* size is set by load_simple_fit(), offset is left as 0 */
+
+     /* now read the whole FIT into memory */

Why do we have to do this? Didn't we just load the FIT in sandbox_spl_load_fit?

Sort-of, but really SPL the simple FIT loader just loads the images, not the entire FIT. It is loaded here just for the benefit for the test, which wants to check that the offsets provided in UPL are correct.

Quoted 31 lines
Quoted 31 lines
arch/sandbox/cpu/spl.c +19 -0
+     fd = os_open(fname, OS_O_RDONLY);
+     if (fd < 0)
+             return log_msg_ret("op2", -ENOENT);
+     if (os_get_filesize(fname,  &size))
+             return log_msg_ret("fis", -ENOENT);
+
+     /* place it after the loaded image, allowing plenty of space */
+     addr = ALIGN(spl_image->load_addr + size, 0x1000);
+     log_debug("Loading whole FIT to %lx\n", addr);
+     if (os_read(fd, map_sysmem(addr, 0), size) != size)
+             return log_msg_ret("rea", -EIO);
+     os_close(fd);
+
+     /* tell UPL where it is */
+     upl_set_fit_addr(addr);
+
+     return 0;
+}
+SPL_LOAD_IMAGE_METHOD("upl", 4, BOOT_DEVICE_UPL, upl_load_from_image);
arch/sandbox/include/asm/spl.h +1 -0
index d50d9ad6b48..d824b2123a2 100644
@@ -18,6 +18,7 @@ enum {
      BOOT_DEVICE_NOR,
      BOOT_DEVICE_SPI,
      BOOT_DEVICE_NAND,
+     BOOT_DEVICE_UPL,
  };
 
Quoted 2 lines

arch/sandbox/include/asm/spl.h enum { · line 24

Quoted 1 line
arch/sandbox/include/asm/spl.h +0 -0
  /**

Regards,
Simon

#34 lore raw

PATCH v2 21/21 upl: Add an end-to-end test

In reply to Simon Glass

Now that sandbox_vpl supports UPL, add a test that checks that the payload can be loaded by SPL and the handoff information passed through to U-Boot proper.

---

Changes in v2:
- Support CI testing
- Rework to use alist instead of fixed-length arrays

 MAINTAINERS               |  1 +
 test/boot/upl.c           | 28 ++++++++++++++++++++++++++++
 test/py/tests/test_upl.py | 17 +++++++++++++++--
 3 files changed, 44 insertions(+), 2 deletions(-)
MAINTAINERS +1 -0
index 96faa9e1acc..e89d166709d 100644
@@ -1705,6 +1705,7 @@ F:	doc/usage/upl.rst
 F:	doc/usage/cmd/upl.rst
 F:	include/upl.h
 F:	test/boot/upl.c
+F:	test/py/tests/test_upl.py
 
 USB
 M:	Marek Vasut <[email protected]>
test/boot/upl.c +28 -0
index c55f1d297d1..9ec2540f455 100644
@@ -398,6 +398,34 @@ static int upl_test_read_write(struct unit_test_state *uts)
 }
 UPL_TEST(upl_test_read_write, UT_TESTF_CONSOLE_REC);
 
+/* Test UPL passthrough */
+static int upl_test_info_norun(struct unit_test_state *uts)
+{
+	const struct upl_image *img;
+	struct upl *upl = gd_upl();
+	const void *fit;
+
+	ut_assertok(run_command("upl info -v", 0));
+	ut_assert_nextline("UPL state: active");
+	ut_assert_nextline("fit %lx", upl->fit);
+	ut_assert_nextline("conf_offset %x", upl->conf_offset);
+	ut_assert_nextlinen("image 0");
+	ut_assert_console_end();
+
+	/* check the offsets */
+	fit = map_sysmem(upl->fit, 0);
+	ut_asserteq_str("conf-1", fdt_get_name(fit, upl->conf_offset, NULL));
+
+	ut_asserteq(1, upl->image.count);
+
+	img = alist_get(&upl->image, 0, struct upl_image);
+	ut_asserteq_str("firmware-1", fdt_get_name(fit, img->offset, NULL));
+	ut_asserteq(CONFIG_TEXT_BASE, img->load);
+
+	return 0;
+}
+UPL_TEST(upl_test_info_norun, UT_TESTF_CONSOLE_REC | UT_TESTF_MANUAL);
+
 int do_ut_upl(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
 {
 	struct unit_test *tests = UNIT_TEST_SUITE_START(upl_test);
test/py/tests/test_upl.py +15 -2
index 171079f8dba..3164bda6b71 100644
@@ -10,6 +10,15 @@ import u_boot_utils
 
 @pytest.mark.boardspec('sandbox_vpl')
 def test_upl_handoff(u_boot_console):
+    """Test of UPL handoff
+
+    This works by starting up U-Boot VPL, which gets to SPL and then sets up a
+    UPL handoff using the FIT containing U-Boot proper. It then jumps to U-Boot
+    proper and runs a test to check that the parameters are correct.
+
+    The entire FIT is loaded into memory in SPL (in upl_load_from_image()) so
+    that it can be inpected in upl_test_info_norun
+    """
     cons = u_boot_console
     ram = os.path.join(cons.config.build_dir, 'ram.bin')
     fdt = os.path.join(cons.config.build_dir, 'u-boot.dtb')
@@ -17,9 +26,13 @@ def test_upl_handoff(u_boot_console):
     # Remove any existing RAM file, so we don't have old data present
     if os.path.exists(ram):
         os.remove(ram)
-    flags = ['-m', ram, '-d', fdt]
+    flags = ['-m', ram, '-d', fdt, '--upl']
     cons.restart_uboot_with_flags(flags, use_dtb=False)
 
     # Make sure that Universal Payload is detected in U-Boot proper
     output = cons.run_command('upl info')
-    assert output == 'UPL state: active'
+    assert 'UPL state: active' == output
+
+    # Check the FIT offsets look correct
+    output = cons.run_command('ut upl -f upl_test_info_norun')
+    assert 'Failures: 0' in output
Signature · 1 line
2.34.1
#35 lore raw
In reply to Simon Glass
Quoted 5 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Quoted 113 lines

UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

[1] https://universalpayload.github.io/spec/
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=414642

Changes in v2:
- Put the upl tests under their own subcommand to avoid bootstd init
- Add a function to init the UPL process in SPL
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL
- Add a link to the spec
- Add a link to the command
- Support CI testing
- Rework to use alist instead of fixed-length arrays

Simon Glass (21):
sandbox: Use const in os_jump_to_file()
sandbox: Fix a comment in os_find_u_boot()
test: Move some SPL-loading test-code into sandbox common
sandbox: Enable SPL_LOAD_BLOCK
fdt: Don't overwrite bloblist devicetree
sandbox: fdt: Avoid overwriting an existing fdt
sandbox: Return error code from read/write/seek
sandbox: Add ELF file to VPL u-boot.img
sandbox: Set up global_data earlier
upl: Add support for reading a upl handoff
upl: Add support for writing a upl handoff
upl: Add basic tests
upl: Add a command
upl: Add support for Universal Payload in SPL
spl: Plumb in the Universal Payload handoff
upl: Plumb in universal payload to the init process
sandbox_vpl: Enable Universal Payload
upl: Add initial documentation
sandbox: Add a flag to enable UPL
sandbox: Add an SPL loader for UPL
upl: Add an end-to-end test

 MAINTAINERS                       |  13 +
 Makefile                          |   4 +-
 arch/sandbox/cpu/cpu.c            |   2 +
 arch/sandbox/cpu/os.c             |  30 +-
 arch/sandbox/cpu/spl.c            | 116 +++++-
 arch/sandbox/cpu/start.c          |  18 +-
 arch/sandbox/include/asm/spl.h    |  15 +
 arch/sandbox/include/asm/state.h  |   1 +
 boot/Kconfig                      |  70 ++++
 boot/Makefile                     |   4 +
 boot/upl_common.c                 |  60 +++
 boot/upl_common.h                 |  24 ++
 boot/upl_read.c                   | 588 ++++++++++++++++++++++++++++
 boot/upl_write.c                  | 622 ++++++++++++++++++++++++++++++
 cmd/Kconfig                       |   7 +
 cmd/Makefile                      |   1 +
 cmd/upl.c                         | 118 ++++++
 common/board_f.c                  |  22 ++
 common/board_r.c                  |   2 +
 common/spl/Kconfig                |   1 +
 common/spl/Makefile               |   2 +
 common/spl/spl.c                  |   8 +
 common/spl/spl_fit.c              |  22 ++
 common/spl/spl_upl.c              | 171 ++++++++
 configs/sandbox_defconfig         |   1 +
 configs/sandbox_vpl_defconfig     |   4 +
 doc/usage/cmd/upl.rst             | 186 +++++++++
 doc/usage/index.rst               |   2 +
 doc/usage/upl.rst                 |  46 +++
 drivers/block/sandbox.c           |   4 +-
 drivers/usb/emul/sandbox_flash.c  |   2 +-
 fs/sandbox/sandboxfs.c            |   6 +-
 include/asm-generic/global_data.h |  19 +
 include/os.h                      |   6 +-
 include/spl.h                     |  16 +
 include/test/suites.h             |   1 +
 include/upl.h                     | 361 +++++++++++++++++
 lib/fdtdec.c                      |   1 +
 test/boot/Makefile                |   2 +
 test/boot/upl.c                   | 436 +++++++++++++++++++++
 test/cmd_ut.c                     |   3 +
 test/image/spl_load_os.c          |  53 +--
 test/py/tests/test_upl.py         |  38 ++
 43 files changed, 3036 insertions(+), 72 deletions(-)
 create mode 100644 boot/upl_common.c
 create mode 100644 boot/upl_common.h
 create mode 100644 boot/upl_read.c
 create mode 100644 boot/upl_write.c
 create mode 100644 cmd/upl.c
 create mode 100644 common/spl/spl_upl.c
 create mode 100644 doc/usage/cmd/upl.rst
 create mode 100644 doc/usage/upl.rst
 create mode 100644 include/upl.h
 create mode 100644 test/boot/upl.c
 create mode 100644 test/py/tests/test_upl.py
Signature · 1 line
2.34.1
#36 lore raw

Am 13. Juli 2024 10:12:50 MESZ schrieb Mark Kettenis <[email protected]>:

Quoted 26 lines
Quoted 5 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Quoted 16 lines

UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

Why is this series needed?

SPL loading a FIT image as described in the "universal" payload spec is already implemented in U-Boot and for instance works fine for running EDK II on RISC-V.

I cannot see what functionality is missing in U-Boot.

The UPL seems to be half cooked:

The FIT file format is already described elsewhere.

The relocation chapter describes that it should better be removed.

The device-tree chapter duplicates content of the device-tree specification and ignores the existing standardization via the Linux project.

The authors seem not to have given any thought to ACPI.

So let us wait if that UPL thing ever lifts off before wasting a code line on it.

Best regards

Heinrich

Quoted 97 lines
Quoted 97 lines

[1] https://universalpayload.github.io/spec/
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=414642

Changes in v2:
- Put the upl tests under their own subcommand to avoid bootstd init
- Add a function to init the UPL process in SPL
- Hang when something goes wrong, to avoid a broken boot
- Add a runtime flag to enable UPL
- Add a link to the spec
- Add a link to the command
- Support CI testing
- Rework to use alist instead of fixed-length arrays

Simon Glass (21):
sandbox: Use const in os_jump_to_file()
sandbox: Fix a comment in os_find_u_boot()
test: Move some SPL-loading test-code into sandbox common
sandbox: Enable SPL_LOAD_BLOCK
fdt: Don't overwrite bloblist devicetree
sandbox: fdt: Avoid overwriting an existing fdt
sandbox: Return error code from read/write/seek
sandbox: Add ELF file to VPL u-boot.img
sandbox: Set up global_data earlier
upl: Add support for reading a upl handoff
upl: Add support for writing a upl handoff
upl: Add basic tests
upl: Add a command
upl: Add support for Universal Payload in SPL
spl: Plumb in the Universal Payload handoff
upl: Plumb in universal payload to the init process
sandbox_vpl: Enable Universal Payload
upl: Add initial documentation
sandbox: Add a flag to enable UPL
sandbox: Add an SPL loader for UPL
upl: Add an end-to-end test

 MAINTAINERS                       |  13 +
 Makefile                          |   4 +-
 arch/sandbox/cpu/cpu.c            |   2 +
 arch/sandbox/cpu/os.c             |  30 +-
 arch/sandbox/cpu/spl.c            | 116 +++++-
 arch/sandbox/cpu/start.c          |  18 +-
 arch/sandbox/include/asm/spl.h    |  15 +
 arch/sandbox/include/asm/state.h  |   1 +
 boot/Kconfig                      |  70 ++++
 boot/Makefile                     |   4 +
 boot/upl_common.c                 |  60 +++
 boot/upl_common.h                 |  24 ++
 boot/upl_read.c                   | 588 ++++++++++++++++++++++++++++
 boot/upl_write.c                  | 622 ++++++++++++++++++++++++++++++
 cmd/Kconfig                       |   7 +
 cmd/Makefile                      |   1 +
 cmd/upl.c                         | 118 ++++++
 common/board_f.c                  |  22 ++
 common/board_r.c                  |   2 +
 common/spl/Kconfig                |   1 +
 common/spl/Makefile               |   2 +
 common/spl/spl.c                  |   8 +
 common/spl/spl_fit.c              |  22 ++
 common/spl/spl_upl.c              | 171 ++++++++
 configs/sandbox_defconfig         |   1 +
 configs/sandbox_vpl_defconfig     |   4 +
 doc/usage/cmd/upl.rst             | 186 +++++++++
 doc/usage/index.rst               |   2 +
 doc/usage/upl.rst                 |  46 +++
 drivers/block/sandbox.c           |   4 +-
 drivers/usb/emul/sandbox_flash.c  |   2 +-
 fs/sandbox/sandboxfs.c            |   6 +-
 include/asm-generic/global_data.h |  19 +
 include/os.h                      |   6 +-
 include/spl.h                     |  16 +
 include/test/suites.h             |   1 +
 include/upl.h                     | 361 +++++++++++++++++
 lib/fdtdec.c                      |   1 +
 test/boot/Makefile                |   2 +
 test/boot/upl.c                   | 436 +++++++++++++++++++++
 test/cmd_ut.c                     |   3 +
 test/image/spl_load_os.c          |  53 +--
 test/py/tests/test_upl.py         |  38 ++
 43 files changed, 3036 insertions(+), 72 deletions(-)
 create mode 100644 boot/upl_common.c
 create mode 100644 boot/upl_common.h
 create mode 100644 boot/upl_read.c
 create mode 100644 boot/upl_write.c
 create mode 100644 cmd/upl.c
 create mode 100644 common/spl/spl_upl.c
 create mode 100644 doc/usage/cmd/upl.rst
 create mode 100644 doc/usage/upl.rst
 create mode 100644 include/upl.h
 create mode 100644 test/boot/upl.c
 create mode 100644 test/py/tests/test_upl.py
Signature · 1 line
2.34.1
#37 lore raw
Quoted 27 lines · Heinrich Schuchardt

Am 13. Juli 2024 10:12:50 MESZ schrieb Mark Kettenis <[email protected]>:

Quoted 24 lines
Quoted 5 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Quoted 14 lines

UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

Quoted 4 lines
Quoted 2 lines
Quoted 2 lines

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

Why is this series needed?

Because UPL is a standard, supported by other projects, which requires more than Just Nothing Else on top of what we do today. Please do provide constructive feedback on the changes themselves, but bringing in UPL support proper is something we should (and will) do. Thanks!

Signature · 1 line
Tom
#38 lore raw
Quoted 31 lines · Tom Rini
Quoted 30 lines · Heinrich Schuchardt

Am 13. Juli 2024 10:12:50 MESZ schrieb Mark Kettenis <[email protected]>:

Quoted 26 lines
Quoted 5 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Quoted 16 lines

UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

Quoted 7 lines
Quoted 1 line

Why is this series needed?

Because UPL is a standard, supported by other projects, which requires more than Just Nothing Else on top of what we do today. Please do provide constructive feedback on the changes themselves, but bringing in UPL support proper is something we should (and will) do. Thanks!

SPL loading a FIT image (e.g. EDK II + OpenSBI) seems to be very close to UPL. What is missing?

UPL is meant as the interface between two firmware pieces and not between firmware and the OS. Why should we let main U-Boot support UPL? Isn't SPL support sufficient?

Which other projects implement the UPL standard?

Best regards

Heinrich

#39 lore raw
Quoted 40 lines · Heinrich Schuchardt
Quoted 31 lines · Tom Rini
Quoted 30 lines · Heinrich Schuchardt

Am 13. Juli 2024 10:12:50 MESZ schrieb Mark Kettenis <[email protected]>:

Quoted 26 lines
Quoted 5 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Quoted 16 lines

UPL is designed to improve interoperability within the firmware industry, allowing mixing and matching of projects with less friction and fewer project-specific implementations. UPL is cross-platform, supporting ARM, x86 and RISC-V initially.

This series provides some initial support for this, targeting 0.9.1 and sandbox only.

Features still to come include:
- Support for architectures
- FIT validation
- Handoff validation
- Interoperability tests

This series is available at dm/uplb-working and requires the alist series at dm/alist-working[2]

Quoted 7 lines
Quoted 1 line

Why is this series needed?

Because UPL is a standard, supported by other projects, which requires more than Just Nothing Else on top of what we do today. Please do provide constructive feedback on the changes themselves, but bringing in UPL support proper is something we should (and will) do. Thanks!

Quoted 8 lines

SPL loading a FIT image (e.g. EDK II + OpenSBI) seems to be very close to UPL. What is missing?

UPL is meant as the interface between two firmware pieces and not between firmware and the OS. Why should we let main U-Boot support UPL? Isn't SPL support sufficient?

Which other projects implement the UPL standard?

coreboot for one, as talked about in the announcement Simon forwarded to the U-Boot list just before this series.

Signature · 1 line
Tom
#40 lore raw
In reply to Mark Kettenis

Hi Mark,

Quoted 10 lines · Mark Kettenis
Quoted 6 lines

From: Simon Glass <[email protected]>
Date: Sat, 13 Jul 2024 08:00:34 +0100

Universal Payload (UPL) is an Industry Standard for firmware components[1].

I think you have some trouble understanding the concept of industry standard ;). I guess you want this to become an industry standard. Firmly https://xkcd.com/927/ territory if you ask me.

Please refrain from snarky comments on the U-Boot mailing list. The Linux list might be a better fit but we don't do that here. Yes, I do understand that we all have weak moments where we get frustrated with something.

Regards,
Simon

[..]