Skip to contentSkip to conversation

6.6.43-rc1 review

PATCH In review Greg Kroah-Hartman 11 participants 27 messages Jul 25, 2024 – Jul 26, 2024

Subsystems (3)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 6.6.43-rc1 review

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.6.43-rc1

Jann Horn <[email protected]>
filelock: Fix fcntl/close race recovery compat path

Takashi Iwai <[email protected]>
ALSA: seq: ump: Skip useless ports for static blocks

Shengjiu Wang <[email protected]>
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused

Krishna Kurapati <[email protected]>
arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB

Krishna Kurapati <[email protected]>
arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB

Krishna Kurapati <[email protected]>
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB

Krishna Kurapati <[email protected]>
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB

Dmitry Baryshkov <[email protected]>

    arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio

Seunghun Han <[email protected]>
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360

Edson Juliano Drosdeck <[email protected]>
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400

Takashi Iwai <[email protected]>
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup

lei lu <[email protected]>
fs/ntfs3: Validate ff offset

Konstantin Komarov <[email protected]>
fs/ntfs3: Add a check for attr_names and oatbl

lei lu <[email protected]>
jfs: don't walk off the end of ealist

lei lu <[email protected]>
ocfs2: add bounds checking to ocfs2_check_dir_entry()

Dan Carpenter <[email protected]>
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()

-------------

Diffstat:

 Makefile                                 |  4 +--
 arch/arm64/boot/dts/qcom/ipq6018.dtsi    |  1 +
 arch/arm64/boot/dts/qcom/msm8996.dtsi    |  1 +
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 13 ++++++++-
 arch/arm64/boot/dts/qcom/sdm630.dtsi     |  1 +
 arch/arm64/boot/dts/qcom/sm6350.dtsi     |  1 +
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c   |  2 +-
 drivers/usb/gadget/function/f_midi2.c    | 19 +++++++------
 fs/jfs/xattr.c                           | 23 +++++++++++++---
 fs/locks.c                               |  9 +++----
 fs/ntfs3/fslog.c                         | 44 +++++++++++++++++++++++++-----
 fs/ocfs2/dir.c                           | 46 ++++++++++++++++++++------------
 sound/core/pcm_dmaengine.c               |  6 ++++-
 sound/core/seq/seq_ump_client.c          | 16 +++++++++++
 sound/pci/hda/patch_realtek.c            |  2 ++
 15 files changed, 142 insertions(+), 46 deletions(-)
author maintainer
#1 lore raw

PATCH 1/16 drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 6769a23697f17f9bf9365ca8ed62fe37e361a05a upstream.

The "instance" variable needs to be signed for the error handling to work.

Fixes 8b2faf1a4f3b ("drm/amdgpu: add error handle to avoid out-of-bounds")
Cc Siddh Raman Pant <[email protected]>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +1 -1
@@ -2027,7 +2027,7 @@ static int sdma_v4_0_process_trap_irq(st
 				      struct amdgpu_irq_src *source,
 				      struct amdgpu_iv_entry *entry)
 {
-	uint32_t instance;
+	int instance;
 
 	DRM_DEBUG("IH: SDMA trap\n");
 	instance = sdma_v4_0_irq_id_to_seq(entry->client_id);
author maintainer
#2 lore raw

PATCH 2/16 ocfs2: add bounds checking to ocfs2_check_dir_entry()

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: lei lu <[email protected]>

commit 255547c6bb8940a97eea94ef9d464ea5967763fb upstream.

This adds sanity checks for ocfs2_dir_entry to make sure all members of ocfs2_dir_entry don't stray beyond valid memory region.

---
 fs/ocfs2/dir.c |   46 +++++++++++++++++++++++++++++-----------------
 1 file changed, 29 insertions(+), 17 deletions(-)
fs/ocfs2/dir.c +29 -17
@@ -294,13 +294,16 @@ out:
  * bh passed here can be an inode block or a dir data block, depending
  * on the inode inline data flag.
  */
-static int ocfs2_check_dir_entry(struct inode * dir,
-				 struct ocfs2_dir_entry * de,
-				 struct buffer_head * bh,
+static int ocfs2_check_dir_entry(struct inode *dir,
+				 struct ocfs2_dir_entry *de,
+				 struct buffer_head *bh,
+				 char *buf,
+				 unsigned int size,
 				 unsigned long offset)
 {
 	const char *error_msg = NULL;
 	const int rlen = le16_to_cpu(de->rec_len);
+	const unsigned long next_offset = ((char *) de - buf) + rlen;
 
 	if (unlikely(rlen < OCFS2_DIR_REC_LEN(1)))
 		error_msg = "rec_len is smaller than minimal";
@@ -308,9 +311,11 @@ static int ocfs2_check_dir_entry(struct
 		error_msg = "rec_len % 4 != 0";
 	else if (unlikely(rlen < OCFS2_DIR_REC_LEN(de->name_len)))
 		error_msg = "rec_len is too small for name_len";
-	else if (unlikely(
-		 ((char *) de - bh->b_data) + rlen > dir->i_sb->s_blocksize))
-		error_msg = "directory entry across blocks";
+	else if (unlikely(next_offset > size))
+		error_msg = "directory entry overrun";
+	else if (unlikely(next_offset > size - OCFS2_DIR_REC_LEN(1)) &&
+		 next_offset != size)
+		error_msg = "directory entry too close to end";
 
 	if (unlikely(error_msg != NULL))
 		mlog(ML_ERROR, "bad entry in directory #%llu: %s - "
@@ -352,16 +357,17 @@ static inline int ocfs2_search_dirblock(
 	de_buf = first_de;
 	dlimit = de_buf + bytes;
 
-	while (de_buf < dlimit) {
+	while (de_buf < dlimit - OCFS2_DIR_MEMBER_LEN) {
 		/* this code is executed quadratically often */
 		/* do minimal checking `by hand' */
 
 		de = (struct ocfs2_dir_entry *) de_buf;
 
-		if (de_buf + namelen <= dlimit &&
+		if (de->name + namelen <= dlimit &&
 		    ocfs2_match(namelen, name, de)) {
 			/* found a match - just to be sure, do a full check */
-			if (!ocfs2_check_dir_entry(dir, de, bh, offset)) {
+			if (!ocfs2_check_dir_entry(dir, de, bh, first_de,
+						   bytes, offset)) {
 				ret = -1;
 				goto bail;
 			}
@@ -1138,7 +1144,7 @@ static int __ocfs2_delete_entry(handle_t
 	pde = NULL;
 	de = (struct ocfs2_dir_entry *) first_de;
 	while (i < bytes) {
-		if (!ocfs2_check_dir_entry(dir, de, bh, i)) {
+		if (!ocfs2_check_dir_entry(dir, de, bh, first_de, bytes, i)) {
 			status = -EIO;
 			mlog_errno(status);
 			goto bail;
@@ -1638,7 +1644,8 @@ int __ocfs2_add_entry(handle_t *handle,
 		/* These checks should've already been passed by the
 		 * prepare function, but I guess we can leave them
 		 * here anyway. */
-		if (!ocfs2_check_dir_entry(dir, de, insert_bh, offset)) {
+		if (!ocfs2_check_dir_entry(dir, de, insert_bh, data_start,
+					   size, offset)) {
 			retval = -ENOENT;
 			goto bail;
 		}
@@ -1777,7 +1784,8 @@ static int ocfs2_dir_foreach_blk_id(stru
 		}
 
 		de = (struct ocfs2_dir_entry *) (data->id_data + ctx->pos);
-		if (!ocfs2_check_dir_entry(inode, de, di_bh, ctx->pos)) {
+		if (!ocfs2_check_dir_entry(inode, de, di_bh, (char *)data->id_data,
+					   i_size_read(inode), ctx->pos)) {
 			/* On error, skip the f_pos to the end. */
 			ctx->pos = i_size_read(inode);
 			break;
@@ -1870,7 +1878,8 @@ static int ocfs2_dir_foreach_blk_el(stru
 		while (ctx->pos < i_size_read(inode)
 		       && offset < sb->s_blocksize) {
 			de = (struct ocfs2_dir_entry *) (bh->b_data + offset);
-			if (!ocfs2_check_dir_entry(inode, de, bh, offset)) {
+			if (!ocfs2_check_dir_entry(inode, de, bh, bh->b_data,
+						   sb->s_blocksize, offset)) {
 				/* On error, skip the f_pos to the
 				   next block. */
 				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
@@ -3342,7 +3351,7 @@ static int ocfs2_find_dir_space_id(struc
 	struct super_block *sb = dir->i_sb;
 	struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
 	struct ocfs2_dir_entry *de, *last_de = NULL;
-	char *de_buf, *limit;
+	char *first_de, *de_buf, *limit;
 	unsigned long offset = 0;
 	unsigned int rec_len, new_rec_len, free_space;
 
@@ -3355,14 +3364,16 @@ static int ocfs2_find_dir_space_id(struc
 	else
 		free_space = dir->i_sb->s_blocksize - i_size_read(dir);
 
-	de_buf = di->id2.i_data.id_data;
+	first_de = di->id2.i_data.id_data;
+	de_buf = first_de;
 	limit = de_buf + i_size_read(dir);
 	rec_len = OCFS2_DIR_REC_LEN(namelen);
 
 	while (de_buf < limit) {
 		de = (struct ocfs2_dir_entry *)de_buf;
 
-		if (!ocfs2_check_dir_entry(dir, de, di_bh, offset)) {
+		if (!ocfs2_check_dir_entry(dir, de, di_bh, first_de,
+					   i_size_read(dir), offset)) {
 			ret = -ENOENT;
 			goto out;
 		}
@@ -3444,7 +3455,8 @@ static int ocfs2_find_dir_space_el(struc
 			/* move to next block */
 			de = (struct ocfs2_dir_entry *) bh->b_data;
 		}
-		if (!ocfs2_check_dir_entry(dir, de, bh, offset)) {
+		if (!ocfs2_check_dir_entry(dir, de, bh, bh->b_data, blocksize,
+					   offset)) {
 			status = -ENOENT;
 			goto bail;
 		}
author maintainer
#3 lore raw

PATCH 3/16 jfs: dont walk off the end of ealist

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: lei lu <[email protected]>

commit d0fa70aca54c8643248e89061da23752506ec0d4 upstream.

Add a check before visiting the members of ea to make sure each ea stays within the ealist.

---
 fs/jfs/xattr.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
fs/jfs/xattr.c +19 -4
@@ -797,7 +797,7 @@ ssize_t __jfs_getxattr(struct inode *ino
 		       size_t buf_size)
 {
 	struct jfs_ea_list *ealist;
-	struct jfs_ea *ea;
+	struct jfs_ea *ea, *ealist_end;
 	struct ea_buffer ea_buf;
 	int xattr_size;
 	ssize_t size;
@@ -817,9 +817,16 @@ ssize_t __jfs_getxattr(struct inode *ino
 		goto not_found;
 
 	ealist = (struct jfs_ea_list *) ea_buf.xattr;
+	ealist_end = END_EALIST(ealist);
 
 	/* Find the named attribute */
-	for (ea = FIRST_EA(ealist); ea < END_EALIST(ealist); ea = NEXT_EA(ea))
+	for (ea = FIRST_EA(ealist); ea < ealist_end; ea = NEXT_EA(ea)) {
+		if (unlikely(ea + 1 > ealist_end) ||
+		    unlikely(NEXT_EA(ea) > ealist_end)) {
+			size = -EUCLEAN;
+			goto release;
+		}
+
 		if ((namelen == ea->namelen) &&
 		    memcmp(name, ea->name, namelen) == 0) {
 			/* Found it */
@@ -834,6 +841,7 @@ ssize_t __jfs_getxattr(struct inode *ino
 			memcpy(data, value, size);
 			goto release;
 		}
+	}
       not_found:
 	size = -ENODATA;
       release:
@@ -861,7 +869,7 @@ ssize_t jfs_listxattr(struct dentry * de
 	ssize_t size = 0;
 	int xattr_size;
 	struct jfs_ea_list *ealist;
-	struct jfs_ea *ea;
+	struct jfs_ea *ea, *ealist_end;
 	struct ea_buffer ea_buf;
 
 	down_read(&JFS_IP(inode)->xattr_sem);
@@ -876,9 +884,16 @@ ssize_t jfs_listxattr(struct dentry * de
 		goto release;
 
 	ealist = (struct jfs_ea_list *) ea_buf.xattr;
+	ealist_end = END_EALIST(ealist);
 
 	/* compute required size of list */
-	for (ea = FIRST_EA(ealist); ea < END_EALIST(ealist); ea = NEXT_EA(ea)) {
+	for (ea = FIRST_EA(ealist); ea < ealist_end; ea = NEXT_EA(ea)) {
+		if (unlikely(ea + 1 > ealist_end) ||
+		    unlikely(NEXT_EA(ea) > ealist_end)) {
+			size = -EUCLEAN;
+			goto release;
+		}
+
 		if (can_list(ea))
 			size += name_size(ea) + 1;
 	}
author maintainer
#4 lore raw

PATCH 4/16 fs/ntfs3: Add a check for attr_names and oatbl

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <[email protected]>

commit 702d4930eb06dcfda85a2fa67e8a1a27bfa2a845 upstream.

Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).

Fixes 865e7a7700d93 ("fs/ntfs3: Reduce stack usage")
---
 fs/ntfs3/fslog.c |   38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)
fs/ntfs3/fslog.c +32 -6
@@ -3722,6 +3722,8 @@ int log_replay(struct ntfs_inode *ni, bo
 
 	u64 rec_lsn, checkpt_lsn = 0, rlsn = 0;
 	struct ATTR_NAME_ENTRY *attr_names = NULL;
+	u32 attr_names_bytes = 0;
+	u32 oatbl_bytes = 0;
 	struct RESTART_TABLE *dptbl = NULL;
 	struct RESTART_TABLE *trtbl = NULL;
 	const struct RESTART_TABLE *rt;
@@ -3736,6 +3738,7 @@ int log_replay(struct ntfs_inode *ni, bo
 	struct NTFS_RESTART *rst = NULL;
 	struct lcb *lcb = NULL;
 	struct OPEN_ATTR_ENRTY *oe;
+	struct ATTR_NAME_ENTRY *ane;
 	struct TRANSACTION_ENTRY *tr;
 	struct DIR_PAGE_ENTRY *dp;
 	u32 i, bytes_per_attr_entry;
@@ -4314,17 +4317,40 @@ check_attr_table:
 	lcb = NULL;
 
 check_attribute_names2:
-	if (rst->attr_names_len && oatbl) {
-		struct ATTR_NAME_ENTRY *ane = attr_names;
-		while (ane->off) {
+	if (attr_names && oatbl) {
+		off = 0;
+		for (;;) {
+			/* Check we can use attribute name entry 'ane'. */
+			static_assert(sizeof(*ane) == 4);
+			if (off + sizeof(*ane) > attr_names_bytes) {
+				/* just ignore the rest. */
+				break;
+			}
+
+			ane = Add2Ptr(attr_names, off);
+			t16 = le16_to_cpu(ane->off);
+			if (!t16) {
+				/* this is the only valid exit. */
+				break;
+			}
+
+			/* Check we can use open attribute entry 'oe'. */
+			if (t16 + sizeof(*oe) > oatbl_bytes) {
+				/* just ignore the rest. */
+				break;
+			}
+
 			/* TODO: Clear table on exit! */
-			oe = Add2Ptr(oatbl, le16_to_cpu(ane->off));
+			oe = Add2Ptr(oatbl, t16);
 			t16 = le16_to_cpu(ane->name_bytes);
+			off += t16 + sizeof(*ane);
+			if (off > attr_names_bytes) {
+				/* just ignore the rest. */
+				break;
+			}
 			oe->name_len = t16 / sizeof(short);
 			oe->ptr = ane->name;
 			oe->is_attr_name = 2;
-			ane = Add2Ptr(ane,
-				      sizeof(struct ATTR_NAME_ENTRY) + t16);
 		}
 	}
 
author maintainer
#5 lore raw

PATCH 5/16 fs/ntfs3: Validate ff offset

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: lei lu <[email protected]>

commit 50c47879650b4c97836a0086632b3a2e300b0f06 upstream.

This adds sanity checks for ff offset. There is a check on rt->first_free at first, but walking through by ff without any check. If the second ff is a large offset. We may encounter an out-of-bound read.

---
 fs/ntfs3/fslog.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
fs/ntfs3/fslog.c +5 -1
@@ -724,7 +724,8 @@ static bool check_rstbl(const struct RES
 
 	if (!rsize || rsize > bytes ||
 	    rsize + sizeof(struct RESTART_TABLE) > bytes || bytes < ts ||
-	    le16_to_cpu(rt->total) > ne || ff > ts || lf > ts ||
+	    le16_to_cpu(rt->total) > ne ||
+			ff > ts - sizeof(__le32) || lf > ts - sizeof(__le32) ||
 	    (ff && ff < sizeof(struct RESTART_TABLE)) ||
 	    (lf && lf < sizeof(struct RESTART_TABLE))) {
 		return false;
@@ -754,6 +755,9 @@ static bool check_rstbl(const struct RES
 			return false;
 
 		off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off));
+
+		if (off > ts - sizeof(__le32))
+			return false;
 	}
 
 	return true;
author maintainer
#6 lore raw

PATCH 6/16 usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 3eb27d3e32c78badbc4db6ae76614b5961e32291 upstream.

The MIDI2 gadget driver handled the default MIDI protocol version incorrectly due to the confusion of the protocol version passed via configfs (either 1 or 2) and UMP protocol bits (0x100 / 0x200). As a consequence, the default protocol always resulted in MIDI1.

This patch addresses the misunderstanding of the protocol handling.

Fixes 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Cc stable <[email protected]>
---
 drivers/usb/gadget/function/f_midi2.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/usb/gadget/function/f_midi2.c +11 -8
index c765f54e613d..38e8ed3144f0 100644
@@ -150,6 +150,9 @@ struct f_midi2 {
 
 #define func_to_midi2(f)	container_of(f, struct f_midi2, func)
 
+/* convert from MIDI protocol number (1 or 2) to SNDRV_UMP_EP_INFO_PROTO_* */
+#define to_ump_protocol(v)	(((v) & 3) << 8)
+
 /* get EP name string */
 static const char *ump_ep_name(const struct f_midi2_ep *ep)
 {
@@ -564,8 +567,7 @@ static void reply_ump_stream_ep_config(struct f_midi2_ep *ep)
 		.status = UMP_STREAM_MSG_STATUS_STREAM_CFG,
 	};
 
-	if ((ep->info.protocol & SNDRV_UMP_EP_INFO_PROTO_MIDI_MASK) ==
-	    SNDRV_UMP_EP_INFO_PROTO_MIDI2)
+	if (ep->info.protocol == 2)
 		rep.protocol = UMP_STREAM_MSG_EP_INFO_CAP_MIDI2 >> 8;
 	else
 		rep.protocol = UMP_STREAM_MSG_EP_INFO_CAP_MIDI1 >> 8;
@@ -627,13 +629,13 @@ static void process_ump_stream_msg(struct f_midi2_ep *ep, const u32 *data)
 		return;
 	case UMP_STREAM_MSG_STATUS_STREAM_CFG_REQUEST:
 		if (*data & UMP_STREAM_MSG_EP_INFO_CAP_MIDI2) {
-			ep->info.protocol = SNDRV_UMP_EP_INFO_PROTO_MIDI2;
+			ep->info.protocol = 2;
 			DBG(midi2, "Switching Protocol to MIDI2\n");
 		} else {
-			ep->info.protocol = SNDRV_UMP_EP_INFO_PROTO_MIDI1;
+			ep->info.protocol = 1;
 			DBG(midi2, "Switching Protocol to MIDI1\n");
 		}
-		snd_ump_switch_protocol(ep->ump, ep->info.protocol);
+		snd_ump_switch_protocol(ep->ump, to_ump_protocol(ep->info.protocol));
 		reply_ump_stream_ep_config(ep);
 		return;
 	case UMP_STREAM_MSG_STATUS_FB_DISCOVERY:
@@ -1065,7 +1067,8 @@ static void f_midi2_midi1_ep_out_complete(struct usb_ep *usb_ep,
 		group = midi2->out_cable_mapping[cable].group;
 		bytes = midi1_packet_bytes[*buf & 0x0f];
 		for (c = 0; c < bytes; c++) {
-			snd_ump_convert_to_ump(cvt, group, ep->info.protocol,
+			snd_ump_convert_to_ump(cvt, group,
+					       to_ump_protocol(ep->info.protocol),
 					       buf[c + 1]);
 			if (cvt->ump_bytes) {
 				snd_ump_receive(ep->ump, cvt->ump,
@@ -1375,7 +1378,7 @@ static void assign_block_descriptors(struct f_midi2 *midi2,
 			desc->nNumGroupTrm = b->num_groups;
 			desc->iBlockItem = ep->blks[blk].string_id;
 
-			if (ep->info.protocol & SNDRV_UMP_EP_INFO_PROTO_MIDI2)
+			if (ep->info.protocol == 2)
 				desc->bMIDIProtocol = USB_MS_MIDI_PROTO_2_0;
 			else
 				desc->bMIDIProtocol = USB_MS_MIDI_PROTO_1_0_128;
@@ -1552,7 +1555,7 @@ static int f_midi2_create_card(struct f_midi2 *midi2)
 		if (midi2->info.static_block)
 			ump->info.flags |= SNDRV_UMP_EP_INFO_STATIC_BLOCKS;
 		ump->info.protocol_caps = (ep->info.protocol_caps & 3) << 8;
-		ump->info.protocol = (ep->info.protocol & 3) << 8;
+		ump->info.protocol = to_ump_protocol(ep->info.protocol);
 		ump->info.version = 0x0101;
 		ump->info.family_id = ep->info.family;
 		ump->info.model_id = ep->info.model;
Signature · 1 line
2.45.2
author maintainer
#7 lore raw

PATCH 7/16 ALSA: hda/realtek: Enable headset mic on Positivo SU C1400

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edson Juliano Drosdeck <[email protected]>

commit 8fc1e8b230771442133d5cf5fa4313277aa2bb8b upstream.

Positivo SU C1400 is equipped with ALC256, and it needs ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -10092,6 +10092,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC),
 	SND_PCI_QUIRK(0x10ec, 0x10f2, "Intel Reference board", ALC700_FIXUP_INTEL_REFERENCE),
 	SND_PCI_QUIRK(0x10ec, 0x118c, "Medion EE4254 MD62100", ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE),
+	SND_PCI_QUIRK(0x10ec, 0x119e, "Positivo SU C1400", ALC269_FIXUP_ASPIRE_HEADSET_MIC),
 	SND_PCI_QUIRK(0x10ec, 0x11bc, "VAIO VJFE-IL", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
 	SND_PCI_QUIRK(0x10ec, 0x1230, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
 	SND_PCI_QUIRK(0x10ec, 0x124c, "Intel Reference board", ALC295_FIXUP_CHROME_BOOK),
author maintainer
#8 lore raw

PATCH 8/16 ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Seunghun Han <[email protected]>

commit d7063c08738573fc2f3296da6d31a22fa8aa843a upstream.

Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID 144d:c1a4 requires the same workaround to enable the speaker amp as other Samsung models with the ALC298 codec.

---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)
sound/pci/hda/patch_realtek.c +1 -0
@@ -10106,6 +10106,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x144d, 0xc189, "Samsung Galaxy Flex Book (NT950QCG-X716)", ALC298_FIXUP_SAMSUNG_AMP),
 	SND_PCI_QUIRK(0x144d, 0xc18a, "Samsung Galaxy Book Ion (NP930XCJ-K01US)", ALC298_FIXUP_SAMSUNG_AMP),
 	SND_PCI_QUIRK(0x144d, 0xc1a3, "Samsung Galaxy Book Pro (NP935XDB-KC1SE)", ALC298_FIXUP_SAMSUNG_AMP),
+	SND_PCI_QUIRK(0x144d, 0xc1a4, "Samsung Galaxy Book Pro 360 (NT935QBD)", ALC298_FIXUP_SAMSUNG_AMP),
 	SND_PCI_QUIRK(0x144d, 0xc1a6, "Samsung Galaxy Book Pro 360 (NP930QBD)", ALC298_FIXUP_SAMSUNG_AMP),
 	SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8),
 	SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_AMP),
author maintainer
#9 lore raw

PATCH 9/16 arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry Baryshkov <[email protected]>

commit f77e7bd40c3c2d79685e9cc80de874b69a976f55 upstream.

On the Qualcomm RB2 platform the I2C bus connected to the LT9611UXC bridge under some circumstances can go into a state when all transfers timeout. This causes both issues with fetching of EDID and with updating of the bridge's firmware. While we are debugging the issue, switch corresponding I2C bus to use i2c-gpio driver. While using i2c-gpio no communication issues are observed.

This patch is asusmed to be a temporary fix, so it is implemented in a non-intrusive manner to simply reverting it later.

---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +12 -1
@@ -57,6 +57,17 @@
 		};
 	};
 
+	i2c2_gpio: i2c {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		status = "disabled";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -187,7 +198,7 @@
 	};
 };
 
-&i2c2 {
+&i2c2_gpio {
 	clock-frequency = <400000>;
 	status = "okay";
 
author maintainer
#10 lore raw

PATCH 10/16 arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <[email protected]>

commit 44ea1ae3cf95db97e10d6ce17527948121f1dd4b upstream.

For Gen-1 targets like MSM8996, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for MSM8996 to mitigate this issue.

---
 arch/arm64/boot/dts/qcom/msm8996.dtsi |    1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/msm8996.dtsi +1 -0
@@ -3082,6 +3082,7 @@
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,is-utmi-l1-suspend;
+				snps,parkmode-disable-ss-quirk;
 				tx-fifo-resize;
 			};
 		};
author maintainer
#11 lore raw

PATCH 11/16 arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <[email protected]>

commit c5d57eb7d06df16c07037cea5dacfd74d49d1833 upstream.

For Gen-1 targets like SM6350, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SM6350 to mitigate this issue.

---
 arch/arm64/boot/dts/qcom/sm6350.dtsi |    1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sm6350.dtsi +1 -0
@@ -1864,6 +1864,7 @@
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
+				snps,parkmode-disable-ss-quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
author maintainer
#12 lore raw

PATCH 12/16 arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <[email protected]>

commit 4ae4837871ee8c8b055cf8131f65d31ee4208fa0 upstream.

For Gen-1 targets like IPQ6018, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.

---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi |    1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/ipq6018.dtsi +1 -0
@@ -579,6 +579,7 @@
 				clocks = <&xo>;
 				clock-names = "ref";
 				tx-fifo-resize;
+				snps,parkmode-disable-ss-quirk;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
author maintainer
#13 lore raw

PATCH 13/16 arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <[email protected]>

commit fad58a41b84667cb6c9232371fc3af77d4443889 upstream.

For Gen-1 targets like SDM630, it is seen that stressing out the controller in host mode results in HC died error:

xhci-hcd.12.auto: xHCI host not responding to stop endpoint command xhci-hcd.12.auto: xHCI host controller not responding, assume dead xhci-hcd.12.auto: HC died; cleaning up

And at this instant only restarting the host mode fixes it. Disable SuperSpeed instance in park mode for SDM630 to mitigate this issue.

---
 arch/arm64/boot/dts/qcom/sdm630.dtsi |    1 +
 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/qcom/sdm630.dtsi +1 -0
@@ -1258,6 +1258,7 @@
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
+				snps,parkmode-disable-ss-quirk;
 
 				/*
 				 * SDM630 technically supports USB3 but I
author maintainer
#14 lore raw

PATCH 14/16 ALSA: pcm_dmaengine: Dont synchronize DMA channel when DMA is paused

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Shengjiu Wang <[email protected]>

commit 88e98af9f4b5b0d60c1fe7f7f2701b5467691e75 upstream.

When suspended, the DMA channel may enter PAUSE state if dmaengine_pause() is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise the DMA channel can't be resumed successfully.

Fixes e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()")
---
 sound/core/pcm_dmaengine.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
sound/core/pcm_dmaengine.c +5 -1
@@ -352,8 +352,12 @@ EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open
 int snd_dmaengine_pcm_sync_stop(struct snd_pcm_substream *substream)
 {
 	struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream);
+	struct dma_tx_state state;
+	enum dma_status status;
 
-	dmaengine_synchronize(prtd->dma_chan);
+	status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state);
+	if (status != DMA_PAUSED)
+		dmaengine_synchronize(prtd->dma_chan);
 
 	return 0;
 }
author maintainer
#15 lore raw

PATCH 15/16 ALSA: seq: ump: Skip useless ports for static blocks

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 3bfd7c0ba184de99e9f5083b29e5308f30767265 upstream.

When the UMP Endpoint is configured with static blocks, the block configuration will never change, hence the unused ports will be unchanged as well. Creating sequencer ports for those unused ports is simply useless, and it might be rather confusing for users. The idea behind the inactive ports was for allowing connections from/to ports that can become usable later, but this will never happen for inactive groups in static blocks.

Let's change the sequencer UMP binding to skip those unused ports when the UMP EP is with static blocks.

---
 sound/core/seq/seq_ump_client.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/core/seq/seq_ump_client.c +16 -0
@@ -28,6 +28,7 @@ struct seq_ump_group {
 	int group;			/* group index (0-based) */
 	unsigned int dir_bits;		/* directions */
 	bool active;			/* activeness */
+	bool valid;			/* valid group (referred by blocks) */
 	char name[64];			/* seq port name */
 };
 
@@ -213,6 +214,13 @@ static void fill_port_info(struct snd_se
 		sprintf(port->name, "Group %d", group->group + 1);
 }
 
+/* skip non-existing group for static blocks */
+static bool skip_group(struct seq_ump_client *client, struct seq_ump_group *group)
+{
+	return !group->valid &&
+		(client->ump->info.flags & SNDRV_UMP_EP_INFO_STATIC_BLOCKS);
+}
+
 /* create a new sequencer port per UMP group */
 static int seq_ump_group_init(struct seq_ump_client *client, int group_index)
 {
@@ -221,6 +229,9 @@ static int seq_ump_group_init(struct seq
 	struct snd_seq_port_callback pcallbacks;
 	int err;
 
+	if (skip_group(client, group))
+		return 0;
+
 	port = kzalloc(sizeof(*port), GFP_KERNEL);
 	if (!port) {
 		err = -ENOMEM;
@@ -258,6 +269,9 @@ static void update_port_infos(struct seq
 		goto error;
 
 	for (i = 0; i < SNDRV_UMP_MAX_GROUPS; i++) {
+		if (skip_group(client, &client->groups[i]))
+			continue;
+
 		old->addr.client = client->seq_client;
 		old->addr.port = i;
 		err = snd_seq_kernel_client_ctl(client->seq_client,
@@ -295,6 +309,7 @@ static void update_group_attrs(struct se
 		group->dir_bits = 0;
 		group->active = 0;
 		group->group = i;
+		group->valid = false;
 	}
 
 	list_for_each_entry(fb, &client->ump->block_list, list) {
@@ -302,6 +317,7 @@ static void update_group_attrs(struct se
 			break;
 		group = &client->groups[fb->info.first_group];
 		for (i = 0; i < fb->info.num_groups; i++, group++) {
+			group->valid = true;
 			if (fb->info.active)
 				group->active = 1;
 			switch (fb->info.direction) {
author maintainer
#16 lore raw

PATCH 16/16 filelock: Fix fcntl/close race recovery compat path

In reply to Greg Kroah-Hartman

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jann Horn <[email protected]>

commit f8138f2ad2f745b9a1c696a05b749eabe44337ea upstream.

When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when fcntl/close race is detected"), I missed that there are two copies of the code I was patching: The normal version, and the version for 64-bit offsets on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable backport...

Apply exactly the same fix to the compat path for 32-bit kernels.

---
 fs/locks.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
fs/locks.c +4 -5
@@ -2503,8 +2503,9 @@ int fcntl_setlk64(unsigned int fd, struc
 	error = do_lock_file_wait(filp, cmd, file_lock);
 
 	/*
-	 * Attempt to detect a close/fcntl race and recover by releasing the
-	 * lock that was just acquired. There is no need to do that when we're
+	 * Detect close/fcntl races and recover by zapping all POSIX locks
+	 * associated with this file and our files_struct, just like on
+	 * filp_flush(). There is no need to do that when we're
 	 * unlocking though, or for OFD locks.
 	 */
 	if (!error && file_lock->fl_type != F_UNLCK &&
@@ -2519,9 +2520,7 @@ int fcntl_setlk64(unsigned int fd, struc
 		f = files_lookup_fd_locked(files, fd);
 		spin_unlock(&files->file_lock);
 		if (f != filp) {
-			file_lock->fl_type = F_UNLCK;
-			error = do_lock_file_wait(filp, cmd, file_lock);
-			WARN_ON_ONCE(error);
+			locks_remove_posix(filp, files);
 			error = -EBADF;
 		}
 	}
Tested-by on the v1 series
#17 lore raw
In reply to Greg Kroah-Hartman

Am 25.07.2024 um 16:37 schrieb Greg Kroah-Hartman:

Quoted 4 lines

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Beste Grüße,
Peter Schneider

Signature · 8 lines
Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
maintainer Tested-by on the v1 series
#18 lore raw
In reply to Greg Kroah-Hartman

Hello,

Quoted 5 lines · On Thu, 25 Jul 2024 16:37:13 +0200 Greg Kroah-Hartman…

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Quoted 8 lines

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].

[1] https://github.com/awslabs/damon-tests/tree/next/corr
[2] e83c10183573 ("Linux 6.6.43-rc1")

Thanks,
SJ

[...]

---

ok 1 selftests: damon: debugfs_attrs.sh
ok 2 selftests: damon: debugfs_schemes.sh
ok 3 selftests: damon: debugfs_target_ids.sh
ok 4 selftests: damon: debugfs_empty_targets.sh
ok 5 selftests: damon: debugfs_huge_count_read_write.sh
ok 6 selftests: damon: debugfs_duplicate_context_creation.sh
ok 7 selftests: damon: debugfs_rm_non_contexts.sh
ok 8 selftests: damon: sysfs.sh
ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh
ok 10 selftests: damon: reclaim.sh
ok 11 selftests: damon: lru_sort.sh
ok 1 selftests: damon-tests: kunit.sh
ok 2 selftests: damon-tests: huge_count_read_write.sh
ok 3 selftests: damon-tests: buffer_overflow.sh
ok 4 selftests: damon-tests: rm_contexts.sh
ok 5 selftests: damon-tests: record_null_deref.sh
ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh
ok 8 selftests: damon-tests: damo_tests.sh
ok 9 selftests: damon-tests: masim-record.sh
ok 10 selftests: damon-tests: build_i386.sh
ok 11 selftests: damon-tests: build_arm64.sh
ok 12 selftests: damon-tests: build_m68k.sh
ok 13 selftests: damon-tests: build_i386_idle_flag.sh
ok 14 selftests: damon-tests: build_i386_highpte.sh
ok 15 selftests: damon-tests: build_nomemcg.sh
[33m
[92mPASS [39m

Tested-by on the v1 series
#19 lore raw
In reply to Greg Kroah-Hartman

Hi Greg,

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

No problems seen on x86_64 and aarch64 with our testing.

Thanks,
Harshit

Quoted 10 lines

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

Tested-by on the v1 series
#20 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by on the v1 series
#21 lore raw
In reply to Greg Kroah-Hartman
Quoted 4 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Tested-by on the v1 series
#22 lore raw
In reply to Greg Kroah-Hartman

Hi Greg

Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

6.6.43-rc1 tested.

Build successfully completed.
Boot successfully completed.
No dmesg regressions.
Video output normal.
Sound output normal.

Lenovo ThinkPad X1 Carbon Gen10(Intel i7-1260P(x86_64) arch linux)

[    0.000000] Linux version 6.6.43-rc1rv

(takeshi@ThinkPadX1Gen10J0764) (gcc (GCC) 14.1.1 20240720, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri Jul 26 20:55:25 JST 2024

Thanks

Tested-by on the v1 series
#23 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

maintainer Tested-by on the v1 series
#24 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

All tests passing for Tegra ...

Test results for stable-v6.6:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    116 tests:	116 pass, 0 fail

Linux version: 6.6.43-rc1-ge83c10183573
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Tested-by Linux Kernel Functional Testing on the v1 series
#25 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 6.6.43-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: e83c1018357355c0547e7887022ef46510253e60
* git describe: v6.6.42-17-ge83c10183573
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.42-17-ge83c10183573

## Test Regressions (compared to v6.6.41-130-gc74fd6c58fb1)

## Metric Regressions (compared to v6.6.41-130-gc74fd6c58fb1)

## Test Fixes (compared to v6.6.41-130-gc74fd6c58fb1)

## Metric Fixes (compared to v6.6.41-130-gc74fd6c58fb1)

## Test result summary
total: 208041, pass: 178672, fail: 4082, skip: 24852, xfail: 435

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 127 total, 127 passed, 0 failed
* arm64: 36 total, 36 passed, 0 failed
* i386: 27 total, 27 passed, 0 failed
* mips: 24 total, 24 passed, 0 failed
* parisc: 3 total, 3 passed, 0 failed
* powerpc: 34 total, 34 passed, 0 failed
* riscv: 17 total, 17 passed, 0 failed
* s390: 12 total, 12 passed, 0 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 6 total, 6 passed, 0 failed
* x86_64: 31 total, 30 passed, 1 failed

## Test suites summary
* boot
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-watchdog
* kselftest-x86
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-smoketest
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Tested-by on the v1 series
#26 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 6.6.43 release. There are 16 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 27 Jul 2024 14:27:16 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.43-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Signature · 1 line
Florian