kbuild: clean up code duplication in cmd_fdtoverlay
PATCH 1/1 kbuild: clean up code duplication in cmd_fdtoverlay
When resolving a merge conflict, Linus noticed the fdtoverlay command duplication introduced by commit 49636c5680b9 ("kbuild: verify dtoverlay files against schema"). He suggested a clean-up.
I eliminated the duplication and refactored the code a little further.
No functional changes are intended, except for the short logs.
The log will look as follows:
$ make ARCH=arm64 defconfig dtbs_check
[ snip ]
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb
DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo
OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbThe tag [C] indicates that the schema check is executed.
---
scripts/Makefile.lib | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-)
scripts/Makefile.lib +10 -18
@@ -400,26 +400,23 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE $(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE $(call if_changed,wrap_S_dtb) -quiet_cmd_dtc = DTC $@ +quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C], ) +cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true) + +quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@ cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -o $@ -b 0 \ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ - cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) - -DT_CHECK_CMD = $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \ + $(cmd_dtb_check) # NOTE: # Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single # DTB is turned into a multi-blob DTB, $^ will contain header file dependencies # recorded in the .*.cmd file. -ifneq ($(CHECK_DTBS),) -quiet_cmd_fdtoverlay = DTOVLCH $@ - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) ; $(DT_CHECK_CMD) $@ || true -else -quiet_cmd_fdtoverlay = DTOVL $@ - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) -endif +quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@ + cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check) $(multi-dtb-y): FORCE $(call if_changed,fdtoverlay)
@@ -430,16 +427,11 @@ DT_CHECKER ?= dt-validate DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m) DT_BINDING_DIR := Documentation/devicetree/bindings DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json - -quiet_cmd_dtb = DTC_CHK $@ - cmd_dtb = $(cmd_dtc) ; $(DT_CHECK_CMD) $@ || true -else -quiet_cmd_dtb = $(quiet_cmd_dtc) - cmd_dtb = $(cmd_dtc) +dtb-check-enabled = $(if $(filter %.dtb, $@),y) endif $(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE - $(call if_changed_dep,dtb) + $(call if_changed_dep,dtc) $(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE $(call if_changed_dep,dtc)
Signature · 1 line
2.43.0
Quoted 90 lines · Masahiro Yamada
When resolving a merge conflict, Linus noticed the fdtoverlay command duplication introduced by commit
49636c5680b9("kbuild: verify dtoverlay files against schema"). He suggested a clean-up.I eliminated the duplication and refactored the code a little further.
No functional changes are intended, except for the short logs.
The log will look as follows:
$ make ARCH=arm64 defconfig dtbs_check [ snip ] DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbThe tag [C] indicates that the schema check is executed.
Link https://lore.kernel.org/lkml/CAHk-=wiF3yeWehcvqY-4X7WNb8n4yw_5t0H1CpEpKi7JMjaMfw@mail.gmail.com/#t open hereRequested-by Linus Torvalds <[email protected]>Signed-off-by Masahiro Yamada <[email protected]>---
scripts/Makefile.lib | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-)scripts/Makefile.lib +10
-18@@ -400,26 +400,23 @@ $(obj)/%.dtb.S: $(obj)/%.dtb FORCE $(obj)/%.dtbo.S: $(obj)/%.dtbo FORCE $(call if_changed,wrap_S_dtb) -quiet_cmd_dtc = DTC $@ +quiet_dtb_check_tag = $(if $(dtb-check-enabled),[C], ) +cmd_dtb_check = $(if $(dtb-check-enabled),; $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) $@ || true) + +quiet_cmd_dtc = DTC $(quiet_dtb_check_tag) $@ cmd_dtc = $(HOSTCC) -E $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(DTC) -o $@ -b 0 \ $(addprefix -i,$(dir $<) $(DTC_INCLUDE)) $(DTC_FLAGS) \ -d $(depfile).dtc.tmp $(dtc-tmp) ; \ - cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) - -DT_CHECK_CMD = $(DT_CHECKER) $(DT_CHECKER_FLAGS) -u $(srctree)/$(DT_BINDING_DIR) -p $(DT_TMP_SCHEMA) + cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile) \ + $(cmd_dtb_check) # NOTE: # Do not replace $(filter %.dtb %.dtbo, $^) with $(real-prereqs). When a single # DTB is turned into a multi-blob DTB, $^ will contain header file dependencies # recorded in the .*.cmd file. -ifneq ($(CHECK_DTBS),) -quiet_cmd_fdtoverlay = DTOVLCH $@ - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) ; $(DT_CHECK_CMD) $@ || true -else -quiet_cmd_fdtoverlay = DTOVL $@ - cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) -endif +quiet_cmd_fdtoverlay = OVL $(quiet_dtb_check_tag) $@ + cmd_fdtoverlay = $(objtree)/scripts/dtc/fdtoverlay -o $@ -i $(filter %.dtb %.dtbo, $^) $(cmd_dtb_check) $(multi-dtb-y): FORCE $(call if_changed,fdtoverlay)@@ -430,16 +427,11 @@ DT_CHECKER ?= dt-validate DT_CHECKER_FLAGS ?= $(if $(DT_SCHEMA_FILES),-l $(DT_SCHEMA_FILES),-m) DT_BINDING_DIR := Documentation/devicetree/bindings DT_TMP_SCHEMA := $(objtree)/$(DT_BINDING_DIR)/processed-schema.json - -quiet_cmd_dtb = DTC_CHK $@ - cmd_dtb = $(cmd_dtc) ; $(DT_CHECK_CMD) $@ || true -else -quiet_cmd_dtb = $(quiet_cmd_dtc) - cmd_dtb = $(cmd_dtc) +dtb-check-enabled = $(if $(filter %.dtb, $@),y) endif $(obj)/%.dtb: $(obj)/%.dts $(DTC) $(DT_TMP_SCHEMA) FORCE - $(call if_changed_dep,dtb) + $(call if_changed_dep,dtc) $(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE $(call if_changed_dep,dtc)Signature · 1 line
2.43.0
Looks good to me, thanks.