usb: dwc3: Use of_property_read_variable_u32_array() to read "power"

There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u32_array() takes a minimum and maximum length and returns the actual length (or error code).

This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed.

Signed-off-by Rob Herring (Arm) <[email protected]>

---
 drivers/usb/dwc3/dwc3-octeon.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

drivers/usb/dwc3/dwc3-octeon.c +4 -15

index 6010135e1acc..1a3b205367fd 100644
@@ -419,7 +419,7 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
 	int ref_clk_sel, ref_clk_fsel, mpll_mul;
 	int power_active_low, power_gpio;
 	int err, len;
-	u32 clock_rate;
+	u32 clock_rate, gpio_pwr[3];
 
 	if (of_property_read_u32(node, "refclk-frequency", &clock_rate)) {
 		dev_err(dev, "No UCTL \"refclk-frequency\"\n");

@@ -476,21 +476,10 @@ static int dwc3_octeon_probe(struct platform_device *pdev)
 
 	power_gpio = DWC3_GPIO_POWER_NONE;
 	power_active_low = 0;
-	if (of_find_property(node, "power", &len)) {
-		u32 gpio_pwr[3];
-
-		switch (len) {
-		case 8:
-			of_property_read_u32_array(node, "power", gpio_pwr, 2);
-			break;
-		case 12:
-			of_property_read_u32_array(node, "power", gpio_pwr, 3);
+	len = of_property_read_variable_u32_array(node, "power", gpio_pwr, 2, 3);
+	if (len > 0) {
+		if (len == 3)
 			power_active_low = gpio_pwr[2] & 0x01;
-			break;
-		default:
-			dev_err(dev, "invalid power configuration\n");
-			return -EINVAL;
-		}
 		power_gpio = gpio_pwr[1];
 	}
 

Signature · 1 line

2.43.0