Skip to contentSkip to conversation

rockchip: Ensure memory size is available in RK3399 SPL

PATCH In review Simon Glass 2 participants 3 messages Aug 1, 2024 – Aug 5, 2024 Arm Rockchip

lore
Share & tools
lore
#0 lore raw

PATCH v9 7/8 rockchip: Ensure memory size is available in RK3399 SPL

At present gd->ram_size is 0 in SPL, meaning that it is not possible to enable the cache. Correct this by always populating the RAM size correctly.

This increases code size by about 500 bytes in SPL, since it must call the rather large rockchip_sdram_size() function.

---

Changes in v9:
- Avoid adding rockchip_sdram_size() to TPL even when RAM is inited

Changes in v3:
- Cut the patch down to bare bones

Changes in v2:
- Add new patch to correct memory size in SPL

 drivers/ram/rockchip/sdram_rk3399.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)
drivers/ram/rockchip/sdram_rk3399.c +14 -8
index ef9a1824b2b..58f3745ffa5 100644
@@ -3142,19 +3142,25 @@ static int rk3399_dmc_init(struct udevice *dev)
 
 static int rk3399_dmc_probe(struct udevice *dev)
 {
+	struct dram_info *priv = dev_get_priv(dev);
+
 #if defined(CONFIG_TPL_BUILD) || \
 	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
 	if (rk3399_dmc_init(dev))
 		return 0;
-#else
-	struct dram_info *priv = dev_get_priv(dev);
-
-	priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
-	debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
-	priv->info.base = CFG_SYS_SDRAM_BASE;
-	priv->info.size =
-		rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2);
 #endif
+	/*
+	 * There is no point in checking the SDRAM size in TPL as it is not
+	 * used, so avoid the code size increment.
+	 */
+	if (!IS_ENABLED(CONFIG_TPL_BUILD)) {
+		priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+		debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
+		priv->info.base = CFG_SYS_SDRAM_BASE;
+		priv->info.size = rockchip_sdram_size(
+			(phys_addr_t)&priv->pmugrf->os_reg2);
+	}
+
 	return 0;
 }
 
Signature · 1 line
2.34.1
#1 lore raw

PATCH v9 8/8 rockchip: Avoid #ifdefs in RK3399 SPL

The code here is confusing due to large blocks which are #ifdefed out. Add a function phase_sdram_init() which returns whether SDRAM init should happen in the current phase, using that as needed to control the code flow.

This increases code size by about 500 bytes in SPL when the cache is on, since it must call the rather large rockchip_sdram_size() function.

---

Changes in v9:
- Make sure that rockchip_sdram_size() is not used in TPL

Changes in v8:
- Include ROCKCHIP_EXTERNAL_TPL in the condition
- Put the non-dcache change back into patch 5

Changes in v5:
- Move setting of pmugrf into the probe() function
- Drop the non-dcache optimisation, since the cache should normally be on
- Drop patches previously applied

Changes in v4:
- Fix 'stating' typo
- Move Binman size feature to a separate series

Changes in v3:
- Split out the refactoring into a separate patch

Changes in v2:
- Drop patch "regulator: rk8xx: Fix incorrect parameter"
- Rewrite boneblack patch to onstead drop the target and update docs

 drivers/ram/rockchip/sdram_rk3399.c | 40 +++++++++++++++--------------
 1 file changed, 21 insertions(+), 19 deletions(-)
drivers/ram/rockchip/sdram_rk3399.c +21 -19
index 58f3745ffa5..45270e27184 100644
@@ -13,6 +13,7 @@
 #include <log.h>
 #include <ram.h>
 #include <regmap.h>
+#include <spl.h>
 #include <syscon.h>
 #include <asm/arch-rockchip/clock.h>
 #include <asm/arch-rockchip/cru.h>
@@ -63,8 +64,6 @@ struct chan_info {
 };
 
 struct dram_info {
-#if defined(CONFIG_TPL_BUILD) || \
-	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
 	u32 pwrup_srefresh_exit[2];
 	struct chan_info chan[2];
 	struct clk ddr_clk;
@@ -75,7 +74,6 @@ struct dram_info {
 	struct rk3399_pmusgrf_regs *pmusgrf;
 	struct rk3399_ddr_cic_regs *cic;
 	const struct sdram_rk3399_ops *ops;
-#endif
 	struct ram_info info;
 	struct rk3399_pmugrf_regs *pmugrf;
 };
@@ -92,9 +90,6 @@ struct sdram_rk3399_ops {
 					struct rk3399_sdram_params *params);
 };
 
-#if defined(CONFIG_TPL_BUILD) || \
-	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
-
 struct rockchip_dmc_plat {
 #if CONFIG_IS_ENABLED(OF_PLATDATA)
 	struct dtd_rockchip_rk3399_dmc dtplat;
@@ -191,6 +186,19 @@ struct io_setting {
 	},
 };
 
+/**
+ * phase_sdram_init() - Check if this is the phase where SDRAM init happens
+ *
+ * Returns: true to do SDRAM init in this phase, false to not
+ */
+static bool phase_sdram_init(void)
+{
+	return spl_phase() == PHASE_TPL ||
+		(!IS_ENABLED(CONFIG_TPL) &&
+		 !IS_ENABLED(CONFIG_ROCKCHIP_EXTERNAL_TPL) &&
+		 !spl_in_proper());
+}
+
 static struct io_setting *
 lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5)
 {
@@ -3021,12 +3029,13 @@ static int sdram_init(struct dram_info *dram,
 
 static int rk3399_dmc_of_to_plat(struct udevice *dev)
 {
-	struct rockchip_dmc_plat *plat = dev_get_plat(dev);
+	struct rockchip_dmc_plat *plat;
 	int ret;
 
-	if (!CONFIG_IS_ENABLED(OF_REAL))
+	if (!CONFIG_IS_ENABLED(OF_REAL) || !phase_sdram_init())
 		return 0;
 
+	plat = dev_get_plat(dev);
 	ret = dev_read_u32_array(dev, "rockchip,sdram-params",
 				 (u32 *)&plat->sdram_params,
 				 sizeof(plat->sdram_params) / sizeof(u32));
@@ -3093,7 +3102,6 @@ static int rk3399_dmc_init(struct udevice *dev)
 	priv->cic = syscon_get_first_range(ROCKCHIP_SYSCON_CIC);
 	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 	priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
-	priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
 	priv->pmusgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
 	priv->pmucru = rockchip_get_pmucru();
 	priv->cru = rockchip_get_cru();
@@ -3138,24 +3146,21 @@ static int rk3399_dmc_init(struct udevice *dev)
 
 	return 0;
 }
-#endif
 
 static int rk3399_dmc_probe(struct udevice *dev)
 {
 	struct dram_info *priv = dev_get_priv(dev);
 
-#if defined(CONFIG_TPL_BUILD) || \
-	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
-	if (rk3399_dmc_init(dev))
+	priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+	debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
+	if (phase_sdram_init() && rk3399_dmc_init(dev))
 		return 0;
-#endif
+
 	/*
 	 * There is no point in checking the SDRAM size in TPL as it is not
 	 * used, so avoid the code size increment.
 	 */
 	if (!IS_ENABLED(CONFIG_TPL_BUILD)) {
-		priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
-		debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
 		priv->info.base = CFG_SYS_SDRAM_BASE;
 		priv->info.size = rockchip_sdram_size(
 			(phys_addr_t)&priv->pmugrf->os_reg2);
@@ -3187,10 +3192,7 @@ U_BOOT_DRIVER(dmc_rk3399) = {
 	.id = UCLASS_RAM,
 	.of_match = rk3399_dmc_ids,
 	.ops = &rk3399_dmc_ops,
-#if defined(CONFIG_TPL_BUILD) || \
-	(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
 	.of_to_plat = rk3399_dmc_of_to_plat,
-#endif
 	.probe = rk3399_dmc_probe,
 	.priv_auto	= sizeof(struct dram_info),
 #if defined(CONFIG_TPL_BUILD) || \
Signature · 1 line
2.34.1
#2 lore raw
In reply to Simon Glass
Quoted 8 lines · Simon Glass

At present gd->ram_size is 0 in SPL, meaning that it is not possible to enable the cache. Correct this by always populating the RAM size correctly.

This increases code size by about 500 bytes in SPL, since it must call the rather large rockchip_sdram_size() function.

[...]

Applied to u-boot/master, thanks!

Signature · 1 line
Tom