arm: dts: rockchip: disable "usb_host0_ohci" to make boot faster for Radxa ROCK 3A
PATCH 1/1 arm: dts: rockchip: disable "usb_host0_ohci" to make boot faster for Radxa ROCK 3A
on-board USB 2.0 hub, FE1.1s, has Transaction Translator which can handle USB 1.x devices via "usb_host0_ehci". so we can omit "usb_host0_ohci" and make boot faster (a little).
=> usb start
starting USB...
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 2 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:
1 Hub (5 Gb/s, 0mA)
U-Boot XHCI Host Controller
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
USB 2.0 Hub
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller
1 Hub (12 Mb/s, 0mA)
| U-Boot Root Hub
|
+-2 Hub (12 Mb/s, 100mA)
| ALCOR Generic USB Hub
|
+-3 Mass Storage (12 Mb/s, 300mA)JetFlash Mass Storage Device 02K1RNH5MJFV4TX6
=> usb reset
resetting USB...
Host not halted after 16000 microseconds.
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:
1 Hub (5 Gb/s, 0mA)
U-Boot XHCI Host Controller
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| USB 2.0 Hub
|
+-3 Hub (12 Mb/s, 100mA)
| ALCOR Generic USB Hub
|
+-4 Mass Storage (12 Mb/s, 300mA)JetFlash Mass Storage Device 02K1RNH5MJFV4TX6
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller
1 Hub (12 Mb/s, 0mA)
U-Boot Root Hub
--- arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +4 -0
@@ -40,3 +40,7 @@ spi-tx-bus-width = <1>; }; }; + +&usb_host0_ohci { + status = "disabled"; +};
Signature · 1 line
2.43.0
sorry, please ignore this patch.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
Quoted 94 lines · FUKAUMI Naoki
on-board USB 2.0 hub, FE1.1s, has Transaction Translator which can handle USB 1.x devices via "
usb_host0_ehci". so we can omit "usb_host0_ohci" and make boot faster (a little).=> usb start
starting USB...
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 2 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-3 Mass Storage (12 Mb/s, 300mA) JetFlash Mass Storage Device 02K1RNH5MJFV4TX6=> usb reset
resetting USB...
Host not halted after 16000 microseconds.
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-4 Mass Storage (12 Mb/s, 300mA) JetFlash Mass Storage Device 02K1RNH5MJFV4TX6 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) U-Boot Root HubSigned-off-by FUKAUMI Naoki <[email protected]>--- arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +4
-0@@ -40,3 +40,7 @@ spi-tx-bus-width = <1>; }; }; + +&usb_host0_ohci { + status = "disabled"; +};
Hi Naoki,
Quoted 3 lines · FUKAUMI Naoki
on-board USB 2.0 hub, FE1.1s, has Transaction Translator which can handle USB 1.x devices via "
usb_host0_ehci". so we can omit "usb_host0_ohci" and make boot faster (a little).
The OHCI is in use when the direct connect device is USB1.1; and if the board
connect with usb2.0 hub, then only EHCI is working and OHCI has no use.
Quoted 74 lines
=> usb start
starting USB...
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 2 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 3 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) USB 2.0 Hub 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-3 Mass Storage (12 Mb/s, 300mA) JetFlash Mass Storage Device 02K1RNH5MJFV4TX6=> usb reset
resetting USB...
Host not halted after 16000 microseconds.
Bus usb@fd000000: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@fd800000: USB EHCI 1.00
Bus usb@fd880000: USB EHCI 1.00
Bus usb@fd8c0000: USB OHCI 1.0
scanning bus usb@fd000000 for devices... 1 USB Device(s) found scanning bus usb@fd800000 for devices... 4 USB Device(s) found scanning bus usb@fd880000 for devices... 1 USB Device(s) found scanning bus usb@fd8c0000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found
=> usb tree
USB device tree:1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Hub (480 Mb/s, 100mA) | USB 2.0 Hub | +-3 Hub (12 Mb/s, 100mA) | ALCOR Generic USB Hub | +-4 Mass Storage (12 Mb/s, 300mA) JetFlash Mass Storage Device 02K1RNH5MJFV4TX6 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller 1 Hub (12 Mb/s, 0mA) U-Boot Root Hub
Quoted 1 line
Signed-off-by FUKAUMI Naoki <[email protected]>
Thanks,
- Kever
Quoted 16 lines
--- arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)arch/arm/dts/rk3568-rock-3a-u-boot.dtsi +4
-0@@ -40,3 +40,7 @@ spi-tx-bus-width = <1>; }; }; + +&usb_host0_ohci { + status = "disabled"; +};