Skip to contentSkip to conversation

ARM: dts: imx1/imx27: Use dma-controller as node name

PATCH Applied Fabio Estevam 2 participants 2 messages Aug 7, 2024 – Aug 13, 2024

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: dts: imx1/imx27: Use dma-controller as node name

From: Fabio Estevam <[email protected]>

According to fsl,imx-dma.yaml, the node name must be dma-controller.

Change it accordingly to fix the following dt-schema warnings:

'dma@10001000' does not match '^dma-controller(@.*)?$'

---
 arch/arm/boot/dts/nxp/imx/imx1.dtsi  | 2 +-
 arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/nxp/imx/imx1.dtsi +1 -1
index 389ecb1ebf8f..a1a89ccacf05 100644
@@ -134,7 +134,7 @@ pwm: pwm@208000 {
 				clock-names = "ipg", "per";
 			};
 
-			dma: dma@209000 {
+			dma: dma-controller@209000 {
 				compatible = "fsl,imx1-dma";
 				reg = <0x00209000 0x1000>;
 				interrupts = <61 60>;
arch/arm/boot/dts/nxp/imx/imx27.dtsi +1 -1
index ec3ccc8f4095..989b7659b669 100644
@@ -88,7 +88,7 @@ aipi1: bus@10000000 { /* AIPI1 */
 			reg = <0x10000000 0x20000>;
 			ranges;
 
-			dma: dma@10001000 {
+			dma: dma-controller@10001000 {
 				compatible = "fsl,imx27-dma";
 				reg = <0x10001000 0x1000>;
 				interrupts = <32>;
Signature · 1 line
2.34.1
Applied
#1 lore raw
Quoted 9 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

According to fsl,imx-dma.yaml, the node name must be dma-controller.

Change it accordingly to fix the following dt-schema warnings:

'dma@10001000' does not match '^dma-controller(@.*)?$'

Hi Fabio,

We may want to copy devicetree folks and list for wider audience in the future.

Applied, thanks!

Shawn