dt-bindings: misc: qcom,fastrpc: document new domain ID
Subsystems (4)
PATCH 1/2 dt-bindings: misc: qcom,fastrpc: document new domain ID
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
--- Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +1 -0
@@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1 memory-region: maxItems: 1
Signature · 1 line
2.43.0
PATCH 2/2 arm64: dts: qcom: sa8775p: fix the fastrpc label
From: Bartosz Golaszewski <[email protected]>
The fastrpc driver uses the label to determine the domain ID and create the device nodes. It should be "cdsp1" as this is the engine we use here.
--- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/sa8775p.dtsi +1 -1
@@ -4046,7 +4046,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP fastrpc { compatible = "qcom,fastrpc"; qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; + label = "cdsp1"; #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
2.43.0
Re: [PATCH 2/2] arm64: dts: qcom: sa8775p: fix the fastrpc label
Quoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
The fastrpc driver uses the label to determine the domain ID and create the device nodes. It should be "cdsp1" as this is the engine we use here.
Fixes df54dcb34ff2 ("arm64: dts: qcom: sa8775p: add ADSP, CDSP and GPDSP nodes")Reported-by Ekansh Gupta <[email protected]>Signed-off-by Bartosz Golaszewski <[email protected]>
Best regards,
Krzysztof
Quoted 14 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
Signed-off-by Bartosz Golaszewski <[email protected]>--- Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +0
-0
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml properties: · line 29
Quoted 4 lines
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +1
-0@@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1
Are there more than one cdsp domains? Why adding suffixes? Driver source code does not have "cdsp1" domain, so this is confusing.
Best regards,
Krzysztof
Quoted 24 lines · Krzysztof Kozlowski
Quoted 14 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
Signed-off-by Bartosz Golaszewski <[email protected]>--- Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +0
-0Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml properties: · line 29
Quoted 4 lines
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +1
-0@@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1Are there more than one cdsp domains? Why adding suffixes? Driver source code does not have "cdsp1" domain, so this is confusing.
Quoted 3 lines
Best regards,
Krzysztof
It does, Srini picked up this patch earlier today. I'm not an expert in fast RPC but it looks like the domain ID number matters here.
Bart
[1] https://lore.kernel.org/all/20240805-topic-sa8775p-iot-remoteproc-v4-4-86affdc72c04@linaro.org/
Quoted 25 lines · Bartosz Golaszewski
Quoted 24 lines · Krzysztof Kozlowski
Quoted 14 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
Signed-off-by Bartosz Golaszewski <[email protected]>--- Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +0
-0Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml properties: · line 29
Quoted 4 lines
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml +1
-0@@ -26,6 +26,7 @@ properties: - mdsp - sdsp - cdsp + - cdsp1Are there more than one cdsp domains? Why adding suffixes? Driver source code does not have "cdsp1" domain, so this is confusing.
Quoted 6 lines
Quoted 3 lines
Best regards,
KrzysztofIt does, Srini picked up this patch earlier today. I'm not an expert in fast RPC but it looks like the domain ID number matters here.
Ah, ok, I did not see driver change here so it was a bit confusing.
Best regards,
Krzysztof
Quoted 6 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
Signed-off-by Bartosz Golaszewski <[email protected]>---
Best regards,
Krzysztof
Re: (subset) [PATCH 1/2] dt-bindings: misc: qcom,fastrpc: document new domain ID
In reply to Bartosz GolaszewskiQuoted 5 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain.
Applied, thanks!
[2/2] arm64: dts: qcom: sa8775p: fix the fastrpc label
commit: b45af698d5114f9b666c7d8b58a9111d0526d7f7
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>